KTM 50 SX 2022
The KTM 50 SX 2022 is a high-performance youth motocross motorcycle designed for aspiring young riders. It is part of KTM’s lineup of mini bikes, providing a stepping stone for young riders to develop their skills and passion for off-road riding. The KTM 50 SX 2022 is equipped with a compact and powerful 49cc single-cylinder two-stroke engine. This engine is specifically designed for young riders, delivering a manageable yet exhilarating powerband that allows them to experience the thrill of motocross racing. It features an automatic centrifugal clutch, making it easy for young riders to control and operate. The motorcycle is built with a lightweight and durable frame, ensuring optimal handling and maneuverability. The suspension system consists of WP XACT forks at the front and a WP XACT shock absorber at the rear, providing responsive and adjustable damping to handle the bumps and jumps of motocross tracks. To enhance safety and control, the KTM 50 SX 2022 is equipped with a range of features. It includes hydraulic disc brakes for precise and reliable stopping power, adjustable handlebars to accommodate different rider heights, and a safety kill switch for immediate engine shutdown in case of an emergency.
Use definition – intended use
This vehicle has been designed and built to withstand the normal stresses and strains of racing. This vehicle complies with the currently valid regulations and categories of the top international motorsports organizations.
Info
Only operate this vehicle in closed-off areas remote from public road traffic.
Misuse
The vehicle must only be used as intended. Dangers can arise for people, property, and the environment through use not as intended. Any use of the vehicle beyond the intended and defined use constitutes misuse. Misuse also includes the use of operating and auxiliary fluids which do not meet the required specification for the respective use.
Safety advice
A number of safety instructions need to be followed to operate the product described safely. Therefore read this instruction and all further instructions included carefully. The safety instructions are highlighted in the text and are referred to in the relevant passages.
Info
Various information and warning labels are attached in prominent locations on the product described. Do not remove any information or warning labels. If they are missing, you or others may not recognize the dangers and may therefore be injured.
Degrees of risk and symbols
Danger
Identifies a danger that will immediately and invariably lead to fatal or serious permanent injury if the appropriate measures are not taken.
Warning
Identifies a danger that is likely to lead to fatal or serious injury if the appropriate measures are not taken.
Caution
Identifies a danger that may lead to minor injuries if the appropriate measures are not taken.
Note
Identifies a danger that will lead to considerable machine and material damage if the appropriate measures are not taken.
Note
Indicates a danger that will lead to environmental damage if the appropriate measures are not taken.
Tampering warning
Tampering with the noise control system is prohibited. Federal law prohibits the following acts or the causing thereof:
- The removal or rendering inoperative by any person other than for purposes of servicing, repair, or replacement, of any device or element of design incorporated into any new vehicle for the purpose of noise control prior to its sale or delivery to the ultimate purchaser or while it is in use, or 2 the use of the vehicle after such device or element of the design has been removed or rendered inoperative by any person.
Among those acts presumed to constitute tampering are the acts listed below:
- Removal or puncturing of the main silencers, baffles, header pipes or any other components which conduct exhaust gases.
- Removal or puncturing of parts of the intake system.
- Lack of proper maintenance.
- Replacing moving parts of the vehicle, or parts of the exhaust system or intake system, with parts other than those specified by the manufacturer.
Safe operation
Danger
The danger of accidents A rider who is not fit to ride poses a danger to him or herself and others.
- Do not operate the vehicle if you are not fit to ride due to alcohol, drugs or medication.
- Do not operate the vehicle if you are physically or mentally impaired.
Danger
The danger of poisoning Exhaust gases are toxic and inhaling them may result in unconsciousness and death.
- Always make sure there is sufficient ventilation when running the engine.
- Use effective exhaust extraction when starting or running the engine in an enclosed space.
Warning
The danger of burns Some vehicle components become very hot when the vehicle is operated.
- Do not touch any parts such as the exhaust system, radiator, engine, shock absorber, or brake system before the vehicle parts have cooled down.
- Let the vehicle parts cool down before you perform any work on the vehicle.
Only operate the vehicle when it is in perfect technical condition, in accordance with its intended use, and in a safe and environmentally compatible manner. The vehicle should only be used by trained persons. Have malfunctions that impair safety are promptly eliminated by an authorized KTM workshop. Adhere to the information and warning labels on the vehicle.
Warning
Risk of injury Missing or poor protective clothing presents an increased safety risk.
- Ensure your child wears appropriate protective clothing such as a helmet, boots, gloves as well as trousers, and a jacket with protectors on all rides.
- Always use protective clothing for your child that is in good condition and meets the legal requirements.
- When you ride a motorcycle, set an example for your child and wear suitable protective clothing.
Work rules
Unless specified otherwise, the ignition must be turned off during all work (models with the ignition lock, models with remote key) or the engine must be at a standstill (models without ignition lock or remote key). Special tools are necessary for certain tasks. The tools are not a component of the vehicle but can be ordered using the number in parentheses. Example: bearing puller (15112017000) During assembly, use new parts to replace parts that cannot be reused (e.g. self-locking screws and nuts, expansion screws, seals, sealing rings, O-rings, pins, and lock washers). In the case of certain screws, a screw adhesive (e.g. Loctite®) is required. Observe the manufacturer’s instructions. If a thread locker (e.g., Precote®) has already been applied to a new part, do not apply any additional thread locker. After disassembly, clean the parts that are to be reused and check them for damage and wear. Change damaged or worn parts. After completing a repair or service work, check the operating safety of the vehicle.
Environment
If you use your motorcycle responsibly, you can ensure that problems and conflicts do not occur. To protect the future of the motorcycle sport, make sure that you use your motorcycle legally, display environmental consciousness, and respect the rights of others. When disposing of used oil, other operating and auxiliary fluids, and used components, comply with the laws and regulations of the respective country. Because motorcycles are not subject to the EU regulations governing the disposal of used vehicles, there are no legal regulations that pertain to the disposal of an end-of-life motorcycle. Your authorized KTM dealer will be glad to advise you.
Owner’s Manual
It is important that you read this Owner’s Manual carefully and completely before your child makes his or her first trip. The Owner’s Manual contains useful information and many tips for you and your child on how to operate, handle, and service your motorcycle. This is the only way for you to find out how to ideally tune the vehicle and how to protect your child from injury.
Tip
Store the Owner’s Manual on your terminal device, for example, so that you can read it whenever you need to. If you would like to know more about the vehicle or have questions on the material you read, please contact an authorized KTM dealer. The Owner’s Manual is an important component of the vehicle. If the vehicle is sold, the Owner’s Manual must be downloaded again by the new owner. The Owner’s Manual can be downloaded several times using the QR code or the link on the delivery certificate. The Owner’s Manual is also available for download from your authorized KTM dealer and on the KTM website. A printed copy can also be ordered from your authorized KTM dealer.
International KTM Website: KTM.COM
Service
A prerequisite for perfect operation and prevention of premature wear is that the service, care, and tuning work on the engine and chassis is properly carried out as described in the Owner’s Manual. An incorrect suspension setting can lead to damage and breakage of chassis components. Use of the vehicle under difficult conditions, such as on sand or on wet, dusty and muddy surfaces, can result in significantly increased wear of components, such as the drive train, brake system, air filter or suspension components. For this reason, it may be necessary to inspect or replace parts before the next scheduled service. It is imperative that you adhere to the stipulated run-in times and service intervals. If you observe these exactly, you will ensure a much longer service life for your motorcycle. The relevant mileage or time interval is whichever occurs first.
Customer service
Your authorized KTM dealer will be happy to answer any questions you may have on your vehicle and KTM. A list of authorized KTM dealers can be found on the KTM website.
International KTM Website: KTM.COM
FAQ
A: The KTM 50 SX 2022 is a mini motocross bike designed for young riders and beginners, offering a platform for learning and developing riding skills.
A: The KTM 50 SX 2022 is equipped with a 49cc single-cylinder two-stroke engine.
A: The KTM 50 SX 2022 features a two-stroke engine, known for its lightweight and high-revving characteristics.
A: The KTM 50 SX 2022 generally comes with an automatic centrifugal clutch and a single-speed transmission, making it easier for young riders to learn to ride.
A: The seat height of the KTM 50 SX 2022 is typically around 26 inches, providing a low and approachable riding position for young riders.
A: Yes, the KTM 50 SX 2022 is often used in competitive youth motocross racing due to its performance capabilities and smaller size.
A: Yes, the KTM 50 SX 2022 often features adjustable suspension, allowing riders to tailor the setup to their weight and riding style.
A: The weight of the KTM 50 SX 2022 is typically around 90-95 pounds, making it manageable for young riders to handle.
A: Yes, the KTM 50 SX 2022 may offer different models or versions with varying features and components, catering to different riding levels.
A: While the KTM 50 SX is primarily designed for motocross tracks, it can also be used for light off-road riding, given its lightweight and capable design.
A: The KTM 50 SX 2022 often comes with hydraulic disc brakes on both the front and rear wheels for reliable stopping power.
A: The KTM 50 SX 2022 may feature safety elements such as a throttle limiter and adjustable power settings to ensure controlled learning for beginners.
A: Yes, the KTM 50 SX 2022 can often be customized with a range of aftermarket parts and accessories to enhance performance or aesthetics.
A: The KTM 50 SX 2022 is generally suitable for young riders who are beginners in the age range of around 4 to 7 years old.
A: The starting price of the KTM 50 SX 2022 can vary based on optional features and configurations, but it generally falls within the range of youth-oriented motocross bikes.
Useful Link
KTM 65 SX 2020 User Manual
KTM 790 Adventure 2021 User Manual