2023 FORD Mustang Keys and Remote Controls Quick Guide

The 2023 Ford Mustang Keys and Remote Controls take ease of use and control to a whole new level. This complex mix of technology and new ideas changes the way you interact with your Mustang and gives you a seamless link that makes driving better. From keyless entry to remote start, these features are the heart of how easy it is to drive a car today. In the 2023 Ford Mustang, the keys and remote controls go beyond standard limits. You can get into your car with a touch, a press, or even from a distance. With the ability to unlock, start, and stop your Mustang at the tip of your fingers, these technologies fit right into your daily life. As you learn more about what these advanced controls can do, you gain the information you need to improve your driving. The 2023 Ford Mustang Keys and Remote Controls change the way we think about access and ease. They make sure that every drive starts with a touch of class and ends with the peace of mind that your Mustang is safe and ready for the next trip.

Keys and Remote Controls

GENERAL INFORMATION ON RADIO FREQUENCIES
This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications not expressively approved by the party responsible for compliance could void the user’s authority to operate the equipment. The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were met.
The typical operating range for your transmitter is approximately 33 ft (10 m). Vehicles with the remote start feature will have a greater range.
One of the following could cause a decrease in operating range:

• Weather conditions.
• Nearby radio towers.
• Structures around the vehicle.
• Other vehicles parked next to your vehicle.

The radio frequency used by your remote control can also be used by other radio transmitters, for example amateur radios, medical equipment, wireless headphones, wireless remote controls, cell phones, battery chargers and alarm systems. If the frequencies are jammed, you will not be able to use your remote control. You can lock and unlock the doors with the key.

• Note: Make sure to lock your vehicle before leaving it unattended.
• Note: If you are in range, the remote control will operate if you press any button unintentionally.
• Note: The remote control contains sensitive electrical components. Exposure to moisture or impact may cause permanent damage.

Intelligent Access (If Equipped)
The system uses a radio frequency signal to communicate with your vehicle and authorize your vehicle to unlock when one of the following conditions are met:

• You activate the front exterior door handle switch.
• You press the luggage compartment button.
• You press a button on the transmitter.

If excessive radio frequency interference is present in the area or if the transmitter battery is low, you may need to mechanically unlock your door. You can use the mechanical key blade in your intelligent access key to open the driver door in this situation. See Remote Control.

REMOTE CONTROL
Remote Control Limitations
The system may not function if:

• The remote control remains stationary for about a minute.
• The vehicle battery has no charge.
• The remote control battery has no charge.
• There is interference causing issues with the remote control frequencies.
• The remote control is too close to metal objects or electronic devices, for example keys or a cell phone.

Intelligent Access Key
Note: You may not be able to shift out of park (P) unless the remote control is inside your vehicle.

The remote control operates the power locks and the remote start system. The key must be in your vehicle to use the push button start.

Removable Key Blade
The remote control also contains a removable key blade that you can use to unlock your vehicle. Push the release button and pull the key blade out. Note: Your vehicle keys came with a security label that provides important key cut information. Keep the label in a safe place for future reference.

Using the Key Blade
The key cylinder is under a cap on the driver door handle.
To remove the cap:

1. Insert the key blade into the slot on the bottom of the handle and apply upward pressure.
2. While maintaining upward pressure, move the cap rearward to release it. Gently remove the key while doing so.

To install the cap:

1. Place the cap just forward of the key cylinder.
2.  Applying pressure to the cap, move it forward until it is in place. You may hear a snap as it engages.

Make sure you have properly installed the cap by trying to move it rearward.

Replacing the Battery

• WARNING: Keep batteries away from children to prevent ingestion. Failure to follow this instruction could result in personal injury or death. If ingested, immediately seek medical attention.
• WARNING: If the battery compartment does not securely close, stop using the remote control and replace it as soon as possible. In the meantime, keep the remote control away from children. Failure to follow this instruction could result in personal injury or death.

A message appears in the information display when the remote control battery is low. See Information Messages (page 112).
The remote control uses one coin-type three-volt lithium battery CR2450 or equivalent.

1. Push the release button and pull the key blade out.
2. Twist a thin coin under the tab hidden behind the key blade head to remove the battery cover.
3. Insert a suitable tool, for example a screwdriver, in the position shown and carefully remove the battery.
   • Note: Refer to local regulations when disposing of remote control batteries.
   • Note: Do not wipe off any grease on the battery terminals or on the back surface of the circuit board.
   • Note: Replacing the battery does not erase the programmed key from your vehicle. The remote control should operate normally.
4. Install a new battery with the + facing upward.
5. Reinstall the battery cover and the key blade.

Car Finder

Press the button twice within three seconds. The horn sounds and the direction indicators flash. We recommend you use this method to locate your vehicle, rather than using the panic alarm.

Sounding the Panic Alarm

Press the button to sound the panic alarm. Press the button again or switch the ignition on to turn it off.

Note: The panic alarm only operates when the ignition is off.

Memory Feature
You can program your intelligent access key to recall memory positions. See Memory Function (page 136).

REPLACING A LOST KEY OR REMOTE CONTROL
Replacement keys or remote controls can be purchased from an authorized dealer. Authorized dealers can program remote controls for your vehicle.

FAQ