2024 Chevrolet Silverado User Manual
The 2024 Chevrolet Silverado is the latest version of a famous American pickup truck. It combines tough toughness with cutting-edge technology and unmatched performance. The Chevrolet Silverado is still a reliable workhorse for both personal and business use, thanks to its bold exterior design, strong powertrain choices, and many high-tech features. The 2024 Silverado promises to be a better truck to drive, whether you’re doing tough jobs on a construction site, going on epic off-road adventures, or just getting around town, setting a new standard in the full-size pickup truck segment while staying true to its heritage of strength and dependability.
Vehicle Messages
Messages displayed on the Driver
Information Center (DIC) indicate the status of the vehicle or some action that may be needed to correct a condition. Multiple messages may appear one after another.
The messages that do not require immediate action can be acknowledged and cleared by pressing the thumbwheel. The messages that require immediate action cannot be cleared until that action is performed.
All messages should be taken seriously; clearing the message does not correct the problem.
If a SERVICE message appears, see your dealer.
Follow the instructions given in the messages. The system displays messages regarding the following topics:
- Service Messages
- Fluid Levels
- Vehicle Security
- Brakes
- Steering
- Ride Control Systems
- Advanced Driver Assistance Systems. Cruise Control
- Lighting and Bulb Replacement
- Wiper/Washer Systems
- Doors and Windows
- Seat Belts
- Airbag Systems
- Engine and Transmission
- Tire Pressure
- Battery
Engine Power Messages
REDUCED ACCELERATION DRIVE WITH CARE
This message displays when the vehicle’s propulsion power is reduced. A reduction in propulsion power can affect the vehicle’s ability to accelerate. If this message is on, but there is no observed reduction in performance, proceed to your destination.
Under certain conditions, the performance may be reduced the next time the vehicle is driven. The vehicle may be driven while this message is on, but maximum acceleration and speed may be reduced. Anytime this message stays on, or displays repeatedly, the vehicle should be taken to your dealer for service as soon as possible.
Under certain operating conditions, propulsion will be disabled. Try restarting after the ignition has been off for two minutes.
Vehicle Speed Messages
SPEED LIMITED TO XXX KM/H (MPH)
This message shows that the vehicle speed has been limited to the speed displayed. The limited speed is protection for various propulsion and vehicle systems, such as lubrication, thermal, brakes, suspension,
Teen Driver if equipped, or tires. If equipped with a diesel engine, see the Duramax Diesel Engine Supplement for additional information.
Universal Remote System
Universal Remote System ProgrammingThis system can replace up to three remote control transmitters used to activate devices such as garage door openers, security systems, and home automation devices.
These instructions refer to a garage door opener but can be used for other devices.
Do not use the Universal Remote system with any garage door opener that does not have the stop and reverse feature. This includes any garage door opener model manufactured before April 1, 1982.
Keep the original hand-held transmitter for use in other vehicles as well as for future programming. Erase the programming when vehicle ownership is terminated. See
“Erasing Universal Remote System Buttons” later in this section.
To program a garage door opener, park outside directly in line with and facing the garage door opener receiver. Clear all people and objects near the garage door.
Make sure the hand-held transmitter has a new battery for quick and accurate transmission of the radio-frequency signal.
Programming the Universal Remote System
Programming involves time-sensitive actions and may time out, requiring the procedure to be repeated. Read these instructions completely before programming the Universal Remote system. It may help to have another person assist with the programming process.
- Hold the end of the hand-held transmitter about 3 to 8 cm (1 to 3 in) away from the Universal Remote system buttons with the indicator light in view. The hand-held transmitter was supplied by the manufacturer of the garage door opener receiver.
- Press and release one of the three Universal Remote system buttons to be programmed. Press and hold the
hand-held transmitter button. Do not release the hand-held transmitter button until the indicator light changes from a slow to a rapid flash or continuous light. Then release the hand-held transmitter button.
Some garage door openers may require the substitution of Step 2 with the procedure under “Radio Signals for Some Gate Operators” later in this section. - Press and hold the newly programmed Universal Remote system button for five seconds while watching the indicator light and garage door activation.
- If the indicator light stays on continuously or the garage door moves when the button is pressed, then programming is complete. There is no need to complete Steps 4–6.
- If the indicator light does not come on or the garage door does not move, a second button press may be required. For a second time, press and hold the newly programmed button for five seconds. If the indicator light stays on continuously or the garage door moves when the button is pressed, then programming is complete. There is no need to complete Steps 4–6.
- If the garage door does not move, continue with programming Steps 4–6.
- After completing Steps 1–3, locate the Learn or Smart button inside garage on the garage door opener receiver. The name and colour of the button may vary by manufacturer.
- Press and release the Learn or Smart button. Step 6 must be completed within 30 seconds of pressing this button.
- Return to the vehicle and firmly press and hold the trained Universal Remote system button for two seconds and release. Repeat the “press/hold/release” sequence up to three times to complete the training process.
The Universal Remote system should now activate the garage door. Repeat the process for programming the remaining two buttons.
For questions or programming help, see www.homelink.com/gm or call
1-800-355-3515. For calls placed outside the U.S., Canada, or Puerto Rico, international rates will apply and may differ based on landline or mobile phone.
Radio Signals for Some Gate Operators
Some gate operators and radio-frequency laws require transmitter signals to time out or quit after several seconds of transmission.
This may not be long enough for the Universal Remote system to pick up the signal during programming
If the programming did not work, replace Step 2 under “Programming the Universal Remote System” with the following:
Press and hold the Universal Remote system button while pressing and releasing the hand-held transmitter button every
two seconds until the signal has been successfully accepted by the Universal Remote system. The Universal Remote system indicator light will flash slowly at first and then change to a rapid flash or continuous solid-light. Proceed with Step 3 under “Programming the Universal Remote System” to complete.
Universal Remote System Operation
Using the Universal Remote System
Press and hold the appropriate Universal Remote system button for at least one-half second. The indicator light will come on while the signal is being transmitted.
Erasing Universal Remote System Buttons
Erase all programmed buttons when vehicle ownership is terminated.
To erase:
- Press and hold the two outside buttons until the indicator light begins to flash. This should take about 10 seconds.
- Release both buttons.
Reprogramming a Single Universal Remote System Button
To reprogram any of the system buttons:
- Press and hold any one of the buttons. Do not release the button.
- The indicator light will begin to flash after 20 seconds. Without releasing the button, proceed with Step 1 under
“Programming the Universal Remote System.”
Distracted Driving
Distraction comes in many forms and can take your focus from the task of driving. Exercise good judgment and do not let other activities divert your attention away from the road. Many local governments have enacted laws regarding driver distraction.
Become familiar with the local laws in your area.
To avoid distracted driving, keep your eyes on the road, keep your hands on the steering wheel, and focus your attention on driving.
- Do not use a phone in demanding driving situations. Use a hands-free method to place or receive necessary phone calls.
- Watch the road. Do not read, take notes, or look up information on phones or other electronic devices.
- Designate a front-seat passenger to handle potential distractions.
- Become familiar with vehicle features before driving, such as programming favourite radio stations and adjusting climate control and seat settings. Program all trip information into any navigation device prior to driving.
- Wait until the vehicle is parked to retrieve items that have fallen to the floor.
- Stop or park the vehicle to tend to children.
- Keep pets in an appropriate carrier or restraint.
- Avoid stressful conversations while driving, whether with a passenger or on a cell phone.
Warning
Taking your eyes off the road too long or too often could cause a crash resulting in injury or death. Focus your attention on driving.
Refer to the infotainment section for more information on using that system and the navigation system, if equipped, including pairing and using a cell phone.
Defensive Driving
Defensive driving means to always expect the unexpected. The first step in driving defensively is to wear a seat belt. See Seat Belts 0 53.
- Assume that other road users (pedestrians, bicyclists, and other drivers) are going to be careless and make mistakes. Anticipate what they may do and be ready.
- Allow enough following distance between your vehicle and the vehicle in front of you.
- Focus on the task of driving.
Impaired Driving
Death and injury associated with impaired driving is a global tragedy.
Warning
Drinking alcohol or taking drugs and then driving is very dangerous. Your reflexes, perceptions, attentiveness, and judgment can be affected by even a small amount of alcohol or drugs. You can have a serious — or even fatal — collision if you drive after drinking or taking drugs.
Do not drive while under the influence of alcohol or drugs, or ride with a driver who has been drinking or is impaired by drugs. Find alternate transportation home; or if you are with a group, designate a driver who will remain sober.
Control of a Vehicle
Braking, steering, and accelerating are important factors in helping to control a vehicle while driving.
Braking
Braking action involves perception time and reaction time. Deciding to push the brake pedal is perception time. Actually doing it is reaction time. The average driver reaction time is about three-quarters of a second. In that time, a vehicle moving at 100 km/h (60 mph) travels 20 m (66 ft), which could be a lot of distance in an emergency.
Helpful braking tips to keep in mind include:
- Keep enough distance between you and the vehicle in front of you.
- Avoid needless heavy braking.
- Keep pace with traffic.
If the engine ever stops or a brake fault occurs, the brakes may lose power assist.
More effort will be required to stop the vehicle. It may take longer to stop.
FAQ
The Chevrolet Silverado is a popular full-size pickup truck known for its towing capacity, durability, and versatility for both work and everyday use.
Engine options may vary but typically include various V6 and V8 engines, possibly with turbocharged or diesel options for increased power and efficiency.
Trim levels often include variations like Work Truck (WT), Custom, LT, RST, LTZ, and High Country, each offering different features and levels of luxury.
Towing capacity varies based on the engine and configuration, but it’s known for its strong towing capabilities, often ranging from several thousand pounds to over 10,000 pounds.
Payload capacity, or the weight the truck can carry in its bed, can also vary, with capacities typically ranging from around 1,500 to 3,000 pounds depending on the model.
Yes, it often offers various cab configurations like Regular Cab, Double Cab, and Crew Cab to accommodate different seating and storage needs.
Features may include touchscreen infotainment systems, Apple CarPlay, Android Auto, wireless charging, premium sound systems, and advanced safety technologies.
Yes, it’s typically available in both two-wheel drive (2WD) and four-wheel drive (4WD) configurations to suit different driving needs.
Fuel efficiency varies across engine types and configurations, but generally, full-size trucks like the Silverado tend to have moderate fuel efficiency.
As of the latest information available, Chevrolet had not introduced hybrid or electric versions of the Silverado for the 2024 model year.
Standard safety features often include a suite of airbags, stability control, rearview cameras, and available options like forward collision warning and lane departure warning.
Wheel sizes vary by trim and configuration but typically range from 17 to 22 inches, offering different styles and functionality.
Design changes can vary with each model year update, potentially including updates to the grille, headlights, interior materials, or tech features.
The warranty often includes a limited bumper-to-bumper warranty, powertrain warranty, and additional coverages. Specific details can be obtained from the dealership.
You can buy a new Chevrolet Silverado from authorized Chevrolet dealerships. Additionally, used models might be available from certified pre-owned dealers or private sellers.
Useful Link
Download Manuals: https://www.chevrolet.com/support/vehicle/manuals-guides
2024 Chevrolet Silverado 1500 Specs, Price, Features, Mileage and Review