2022 Vauxhall Insignia Fuses and Fuse Box | What Happens when Fuse Box blown
The 2022 Vauxhall Insignia has an advanced fuse box system that is intended to safeguard all of the vehicle’s electrical components. It’s essential to comprehend fuses and the fuse box that matches them if you want different systems to run smoothly. With various fuses to protect distinct circuits, the fuse box functions as a protective center. The corresponding fuse in a system is intended to blow in the event of an electrical overload or fault, thereby cutting off the circuit and avoiding component damage.
A blown fuse may have a number of effects, depending on which circuit is impacted. The loss of power to particular components such as lights, wipers, infotainment systems, or other electrical parts is a common scenario. Restoring the affected system’s functionality requires locating and replacing the blown fuse.
Electrical system
Fuses
Data on the replacement fuse must match the data on the defective fuse.
There are two fuse boxes in the vehicle:
- Engine compartment
- Instrument panel
Before replacing a fuse, turn off the respective switch and the ignition.
A blown fuse can be recognised by its melted wire.
Caution
Do not replace the fuse until the cause of the fault has been remedied.
Some functions are protected by several fuses.
Fuses may also be inserted without existence of a function.
Fuse extractor
A fuse extractor may be located in the fuse box in the engine compartment. The extractor has two sides, each side is designed for a different type of fuses.
Grab the fuse with the fuse extractor and withdraw the fuse.
Engine compartment fuse box
The fuse box is in the front left of the engine compartment.
Disengage the cover and remove it.
No. Circuit
- –
- –
- ABS
- –
- Load compartment fuse box
- Tailgate
- Rear fog light / Front fog lights
- Memory module
- Heated windscreen
- Seat lumbar
- DC / DC battery
- Heated rear window
- Heated mirror
- –
- LED headlights
- Front wiper
- Power seat, passenger
- Sunblind
- Power seat, driver
- –
- Sunroof
- Rear wiper
- Rear seat power folding
- –
- –
- Transmission control module
- Ignition / Instrument panel
- –
- Rear view camera / Air vent
- Malfunction indicator light /
Trailer - –
- –
- Seat heating front
- Seat heating rear
- Damping / All-wheel drive
- Fuel system
- –
- –
- –
- Steering wheel lock
- –
- –
- Heated steering wheel
- Headlight range adjustment
- –
- Engine control module
- –
- DC/DC converter
- Rear door control module
- –
- –
- –
- –
- –
- Starter
- Load compartment fuse box
- –
- Alarm siren
- Cooling fan
- –
- –
- –
- –
- Climate control
- –
- –
- –
- –
- –
- –
- Starter
- –
- Transmission control module / Engine cooling
- Engine control module
- Exhaust reduction system
- –
- Horn
- Washer system
- –
- Engine control module
- –
- Ignition coil
- Ignition coil
- Other fuse area
- –
- Diesel fuel heating
- Air shutter
- –
- –
- –
- –
- Electronic key system
- –
- Coolant pump
- Diesel fuel heating
- –
- –
- –
After having changed defective fuses, close the fuse box cover and press until it engages.
If the fuse box cover is not closed correctly, malfunction may occur.
Instrument panel fuse box
In left-hand drive vehicles, the fuse box is behind a cover in the instrument panel.
Disengage cover at the side and remove.
In right-hand drive vehicles, the fuse box is located behind a cover in the glovebox. Open the glovebox and remove the cover.
In right-hand drive vehicles, the fuse box is located behind a cover in the glovebox. Open the glovebox and remove the cover.
No. Circuit
- Left power window
- Right power window
- Body control module
- Climate control fan
- Body control module
- Trailer provisions
- LED headlight left
- Body control module
- Engine control module
- Head-up display
- NOx reduction / Pipe heater
- NOx reduction / Soot sensor
- AdBlue module
- Heated steering wheel
- Transmission control module
- Amplifier
- LED headlight right
- Body control module
- AdBlue module
- Body control module
- Body control module
- Body control module
- Electric steering wheel lock
- Airbag
- Diagnostic connector
- Power outlet load compartment
- ABS
- Police or taxi provision
- Fuel pump
- Fuel pump
- Steering wheel controls
- Ignition switch
- Climate control
- Central gateway module
- AUX / USB connector
- Wireless charger
- Rear wiper
- Emergency call
- Display
- Parking assist
- Overhead console
- Infotainment System
- Police car systems
- Power out
Load compartment fuse box
The fuse box is located on the left side of the load compartment behind a cover.
Remove the cover.
Disengage the fuse box cover and remove it.
Notice
Not all fuses or this fusebox may not be fitted.
No. Circuit
- –
- –
- Trailer interface module
- –
- Power tailgate hands-free
sensor - –
- –
- Power tailgate
- –
- Vehicle care 241–
- Trailer outlet
- Seat heating front left
- Seat heating front right
- Seat heating rear 1
- Seat heating rear 2
- –
- Trailer outlet
- –
- –
- –
- Power tailgate
After having changed defective fuses, close the fuse box cover and press until it engages.
FAQs
By guarding against damage from electrical overloads, the fuse box protects the vehicle’s various electrical circuits.
The fuse box is usually found inside the cabin or in the engine bay. Refer to the owner’s handbook for exact locations
To avoid damage from overload, the corresponding electrical system or component shuts down when a fuse blows.
Examine the fuses visually or check for continuity with a multimeter. A broken connection is frequently visible through the fuse window on blown fuses.
A blown fuse can impact several systems or parts that are connected to the same circuit.
To get functionality back, replace the blown fuse with one of the same rating.
Indeed, depending on the circuit, the car may use a variety of fuse types, including blade, cartridge, or mini fuses.
No, in order to prevent harm to the electrical system, it is essential to replace a blown fuse with one of the appropriate amperages.
Fuse blowouts are rare unless there’s an overload or underlying electrical problem.
Indeed, very high or low temperatures can affect how well fuses and the fuse box work.
Absolutely, in order to maintain their continuous operation, safety-critical systems frequently have specialized fuses.
Yes, repeated fuse blows due to electrical overload can be caused by a malfunctioning component.
Disconnecting the battery before working on electrical components is a good safety precaution to avoid unintentional short circuits.
Indeed, moisture can lead to short circuits or corrosion in the fuse box, which will negatively impact its operation.
Yes, in order to avoid any potential damage, it is advised that you seek assistance from a qualified technician if you are unsure about diagnosing or replacing fuses.
Useful Links
View Full PDF: Vauxhall Insignia 2022 User|Auto User Guide
2022 Vauxhall Insignia Instrument Cluster and Controls Guidelines