How to Replace Fuse: 2022 Hyundai Kona N Fuse Diagrams
In the 2022 Hyundai Kona N, changing a fuse is an easy but important part of regular car repair. Understanding how to use fuse diagrams is important for making sure that all of the electrical parts in the car work right. Following the steps shown in the fuse pictures is a good way for drivers to fix electrical problems quickly and correctly. Finding the bad fuse, finding its place in the fuse box, carefully taking it out and putting in a new one are the steps needed to replace a fuse in a Hyundai Kona N. As a visual help, these diagrams make the job easier for drivers and give them the confidence to fix electrical problems. With clear directions and labelled diagrams, drivers can easily get to and change fuses without the help of a professional, which saves them time and money. The fuse replacement process shows that Hyundai is committed to making designs that are easy for people to use and gives drivers the tools they need to take charge of their car’s care. Basically, learning how to use the 2022 Hyundai Kona N’s fuse diagrams to replace fuses is a useful skill that makes the driver more independent and makes sure the car runs at its best.
2024 Hyundai Kona Specs, Price, Features, Mileage And Review
FUSES![2022 Hyundai Kona N-How to Replace Fuse-Fuse Diagrams-fig 14](https://www.autouserguide.com/wp-content/uploads/2024/02/2022-Hyundai-Kona-How-to-Fix-a-Blown-Fuse-Fuse-Diagrams-fig-1-3.png)
[A]: Normal, [B]: Blown
A vehicle’s electrical system is protected from electrical overload damage by fuses.
This vehicle has 5 fuse panels, one located in the driver’s side panel bolster, and the other in the engine compartment.
If any of your vehicle’s lights, accessories, or controls do not work, check the appropriate circuit fuse. If a fuse has blown, the element inside the fuse will be melted or broken.
If the electrical system does not work, first check the driver’s side fuse panel. Before replacing a blown fuse, turn the engine and all switches off, and then disconnect the negative battery cable. Always replace a blown fuse with one of the same rating.
If the replacement fuse blows, this indicates an electrical problem.
Avoid using the system involved. We recommend that you immediately consult an authorized HYUNDAI dealer.
WARNING
NEVER replace a fuse with anything but another fuse of the same rating.
- A higher capacity fuse could cause damage and possibly cause a fire.
- Do not install a wire or aluminium foil instead of the proper fuse – even as a temporary repair. It may cause extensive wiring damage and possibly a fire.
NOTICE
Do not use a screwdriver or any other metal object to remove fuses because it may cause a short circuit and damage the system.
Instrument panel fuse replacement![2022 Hyundai Kona N-How to Replace Fuse-Fuse Diagrams-fig 1](https://www.autouserguide.com/wp-content/uploads/2024/02/2022-Hyundai-Kona-N-How-to-Replace-Fuse-Fuse-Diagrams-fig-1.png)
- Turn the vehicle off.
- Turn all other switches off.
- Open the fuse panel cover.
- Refer to the label on the inside of the fuse panel cover to locate the suspected fuse location.
- Pull the suspected fuse straight out. Use the removal tool (1) provided in the engine compartment fuse panel cover.
- Check the removed fuse; replace it if it is blown. Spare fuses are provided in the instrument panel fuse panels (or in the engine compartment fuse panel).
- Push in a new fuse of the same rating, and make sure it fits tightly in the clips. If it fits loosely, consult an authorized HYUNDAI dealer.
In an emergency, if you do not have a spare fuse, use a fuse of the same rating from a circuit you may not need for operating the vehicle, such as the cigarette lighter fuse.
If the headlamps or other electrical components do not work and the fuses are undamaged, check the fuse panel in the engine compartment. If a fuse is blown, it must be replaced with the same rating.
Fuse switch
Always, place the fuse switch in the ON position. If you move the switch to the OFF position, some items such as the audio system and digital clock must be reset and the smart key may not work properly.
Information
If the fuse switch is OFF, the above message will appear.
NOTICE
- Always place the fuse switch in the ON position while driving the vehicle.
- Do not move the fuse switch repeatedly. The fuse switch may be damaged.
Engine compartment panel fuse replacement
Blade fuse / Cartridge fuse
- Turn the vehicle off.
- Turn all other switches off.
- Remove the fuse panel cover by pressing the tap and pulling up.
- Check the removed fuse; replace it if it is blown. To remove or insert the fuse, use the fuse puller in the engine compartment fuse panel.
- Push in a new fuse of the same rating, and make sure it fits tightly in the clips. If it fits loosely, consult an authorized HYUNDAI dealer.
NOTICE
After checking the fuse panel in the engine compartment, securely install the fuse panel cover. You may hear a clicking sound if the cover is securely latched. If it is not securely latched, electrical failure may occur from water contact.
Main fuse
If the main fuse is blown, it must be removed as follows:
- Turn off the engine.
- Disconnect the negative battery cable.
- Remove the fuse panel cover by pressing the tab and pulling it up.
- Remove the nuts shown in the picture above.
- Replace the fuse with a new one of the same rating.
- Reinstall in the reverse order of removal.
Information
If the main fuse is blown, consult an authorized HYUNDAI dealer.
Multi fuse
If the multi fuse is blown, it must be removed as follows:
- Turn off the engine.
- Disconnect the negative battery cable.
- Remove the fuse panel cover by pressing the tab and pulling it up.
- Remove the nuts shown in the picture above.
- Replace the fuse with a new one of the same rating.
- Reinstall in the reverse order of removal.
Information
If the multi fuse is blown, consult an authorized HYUNDAI dealer.
Fuse/relay panel description
Instrument panel fuse panel
Inside the fuse/relay box cover, you can find the fuse/relay label describing fuse/relay names and ratings.
Information
Not all fuse panel descriptions in this manual may apply to your vehicle; the information is accurate at the time of printing. When you inspect the fuse box on your vehicle, refer to the fuse box label.
Driver’s side fuse panel
Fuse Name | Fuse Rating | Circuit Protected |
MODULE5 |
7.5A |
Front Wireless Charger Unit, Front Air Ventilation Control Module, ATM Shift Lever IND., Driver Console Switch, Electro Chromic Mirror, A/V & Navigation Head Unit, Low DC-DC Converter, Data Link Connector, AMP, Crash Pad Switch, Head Lamp LH/RH, A/C Control Module, Front/Rear Seat Warmer Control Module |
MODULE3 | 7.5A | Stop Lamp Switch, BCM, ATM Shift Lever |
SUNROOF | 20A | Sunroof Unit |
TAILGATE OPEN | 10A | Tailgate Relay |
P/WINDOW LH | 25A | Power Window LH Relay, Driver Safety Window Module (LHD) |
MULTIMEDIA | 15A | Low DC-DC Convertor, A/V & Navigation Head Unit |
P/WINDOW RH | 25A | Power Window RH Relay, Driver Safety Window Module (RHD) |
P/SEAT (DRV) | 25A | Driver Seat Manual Switch, Driver Reclining Switch |
P/SEAT (PASS) | 25A | Passenger Seat Manual Switch |
MODULE4 | 7.5A | LSD Control Module, BCM, Front View Camera, ECS Unit, Steering Angle Sensor |
PDM3 | 7.5A | Smart Key Control Module |
INTERIOR LAMP |
7.5A |
Foot Lamp LH/RH, Vanity Lamp LH/RH, Room Lamp, Overhead Console Lamp, Glove Box Lamp, Luggage Lamp |
MEMORY |
10A |
A/C Control Module, Rain Sensor, Head-Up Display, Instrument Cluster, Driver Console Switch, Rear Corner Radar LH/RH, BCM, Front Wireless Charger Unit, ICM Relay Box (Outside Folding/Unfolding Relay) |
Fuse Name | Fuse Rating | Circuit Protected |
S/HEATER REAR | 20A | Rear Seat Warmer Control Module |
AMP | 30A | Low DC-DC Convertor, AMP |
MODULE6 | 7.5A | Smart Key Control Module, BCM |
MDPS | 7.5A | MDPS Unit |
MODULE1 | 7.5A | Hazard Switch, Data Link Connector |
MODULE7 | 7.5A | Electronic Sound Generator Unit, Front Air Ventilation ControlModule, Front/Rear Seat Warmer Control Module |
A/BAG IND | 7.5A | A/C Control Module |
BRAKE SWITCH | 7.5A | Stop Lamp Switch, Smart Key Control Module |
START | 7.5A | Smart Key Control Module, ECM |
CLUSTER | 7.5A | Head-Up Display, Instrument Cluster |
DOOR LOCK | 20A | Door Lock Relay, Door Unlock Relay, ICM Relay Box (Two Turn Unlock Relay) |
PDM2 | 7.5A | Not Used |
FCA | 10A | Front Radar Unit |
Fuse Name | Fuse Rating | Circuit Protected |
S/HEATER FRT | 20A | Front Seat Warmer Control Module, Front Air Ventilation Control Module |
A/C2 | 10A | A/C Control Module, Blower Motor, E/R Junction Block (RLY. 10) |
A/C1 | 7.5A | A/C Control Module, E/R Junction Block (RLY. 10) |
PDM1 | 15A | Smart Key Control Module, Start/Stop Button Switch |
SPARE | 10A | Spare |
AIRBAG | 15A | SRS Control Module |
IG1 | 25A | PCB Block (Fuse : F10, F12, F14, F16) |
MODULE2 |
10A |
Emergency Call (E-Call) Module, Front USB Charger, Smart KeyControl Module, BCM, A/V & Navigation Head Unit, Low DC-DC Convertor, AMP, Power Outside Mirror Switch, E/R Junction Block (RLY. 5) |
WASHER | 15A | Multifunction Switch |
WIPER (LO/HI) | 10A | BCM |
WIPER RR | 15A | Rear Wiper Relay, Rear Wiper Motor |
WIPER FRT | 25A | Front Wiper Motor, PCB Block(Front Wiper (Low) Relay) |
HEATED MIRROR | 10A | Driver/Passenger Power Outside Mirror, A/C Control Module |
HEATED STEERING | 15A | BCM |
Engine compartment fuse panel
Inside the fuse/relay box cover, you can find the fuse/relay label describing fuse/relay names and ratings.
2024 Hyundai Kona Specs, Price, Features, Mileage And Review
Information
Not all fuse panel descriptions in this manual may apply to your vehicle; the information is accurate at the time of printing. When you inspect the fuse panel in your vehicle, refer to the fuse panel label.
Engine compartment fuse panel
Relay No. | Relay Name | |
RLY.3 | E63 | PDM #3 (IG1) Relay |
RLY.4 | E64 | Start #1 Relay |
RLY.5 | E65 | Power Outlet Relay |
RLY.6 | E66 | PDM #4 (IG2) Relay |
RLY.7 | E67 | Fuel Pump Relay |
RLY.8 | E68 | PDM #2 (ACC) Relay |
RLY.10 | E70 | Blower Relay |
RLY.11 | E71 | PTC Heater #1 Relay |
RLY.12 | E72 | Rear Heated Relay |
RLY.13 | E73 | PTC Heater #2 Relay |
RLY.14 | E74 | E-CVVT Relay |
Type | Fuse Name | Fuse Rating | Circuit Protected |
MULTI FUSE-1 |
ALTERNATOR | 180A | E/R Junction Block (Fuse – F19, F20, F21, F22, F23, F24, F25), Alternator |
MDPS | 100A | MDPS Unit | |
MULTI FUSE-2 |
B+5 | 60A | PCB Block (Fuse – F1, F2, F3, Engine Control Relay) |
B+2 | 60A | IGPM (Fuse – F30, IPS0, IPS1, IPS2) | |
B+3 | 60A | IGPM (IPS3, IPS4, IPS5, IPS6, IPS7) | |
B+4 | 50A | IGPM (Fuse – F3, F4, F5, F7, F8, F9, F15, F17, F18) | |
EOP | 60A | Electronic Oil Pump | |
DCT1 | 60A | TCM | |
BLOWER | 40A | E/R Junction Block (RLY.10) | |
IG1 | 40A | E/R Junction Block (RLY.3, RLY.8) | |
IG2 | 40A | E/R Junction Block (RLY.6) |
Type | Fuse Name | Fuse Rating | Circuit Protected |
FUSE |
VACUUM PUMP | 20A | Electronic Vacuum Pump |
FUEL PUMP |
20A | E/R Junction Block (RLY.7) | |
B+1 |
40A | IGPM (Fuse – F21, F24, F27, F28, F33, Leak Current Autocut Device) | |
ECS | 20A | ECS Unit | |
E-LSD | 20A | LSD Control Module | |
ABS1 | 40A | ESP Control Module | |
ABS2 | 40A | ESP Control Module, Multipurpose Check Connector | |
E-CVVT1 | 40A | E/R Junction Block (RLY.14) | |
POWER OUTLET1 | 40A | E/R Junction Block (RLY.5) | |
MULTI FUSE-3 |
COOLING FAN | 80A | Cooling Fan Controller |
PTC HEATER1 | 50A | E/R Junction Block (RLY.11) | |
PTC HEATER2 | 50A | E/R Junction Block (RLY.13) | |
REAR HEATED | 40A | E/R Junction Block (RLY.12) | |
FUSE |
POWER OUTLET2 | 20A | Power Outlet #2 |
POWER OUTLET3 | 20A | Power Outlet #1 | |
E-CVVT3 | 20A | ECM | |
E-CVVT2 | 20A | ECM |
Engine compartment fuse panel (PCB Block)
Fuse Name | Fuse Rating | Circuit Protected |
A/C | 10A | PCB Block (A/C Comp Relay) |
HORN | 15A | PCB Block (Horn Relay) |
ECU3 | 15A | ECM |
SPARE | 10A | Not Used |
IGN COIL | 20A | Ignition Coil #1/#2/#3/#4 |
SPARE | 15A | Not Used |
SENSOR1 | 15A | Oxygen Sensor (Up/Down) |
SENSOR3 | 10A | E/R Junction Block (RLY. 7) |
SPARE | 15A | Not Used |
DCT2 | 15A | TCM |
ECU1 | 20A | ECM |
ABS3 | 10A | Multipurpose Check Connector, ESP Control Module |
EWP | 10A | Electric Water Pump |
SENSOR4 | 15A | Electronic Vacuum Pump |
SENSOR2 | 10A | Purge Control Solenoid Valve, Recirculation Control Solenoid Valve, Active Exhaust Valve, Oil Control Valve, Cooling Fan Controller, PCB Block (A/C Comp Relay) |
ECU2 | 10A | ECM |
Engine compartment fuse panel (Battery terminal cover)
Inside the fuse/relay box cover, you can find the fuse/relay label describing fuse/relay names and ratings.
Information
Not all fuse panel descriptions in this manual may apply to your vehicle; the information is accurate at the time of printing. When you inspect the fuse panel in your vehicle, refer to the fuse panel label.
NOTICE
After checking the fuse panel in the engine compartment, securely install the cover. If it is not securely latched, electrical failure may occur from water contact.
How to replace the Fuse of the 2022 Hyundai Kona N
Replacing a fuse in a 2022 Hyundai Kona N is a relatively straightforward process. Here’s a general guide:
Materials:
- The new fuse of the correct amperage.
- Fuse puller or needle-nose pliers.
Instructions:
- Locate the Fuse Box: The fuse box in the Hyundai Kona N is typically located either in the engine compartment or inside the cabin. In the Kona N, the fuse box is usually located in the engine compartment.
- Turn Off the Vehicle: Make sure the vehicle is turned off and the key is removed from the ignition before replacing any fuses to prevent electrical accidents.
- Locate the Blown Fuse: Use a fuse puller or a pair of needle-nose pliers to carefully remove the blown fuse from its slot in the fuse box. Be sure to only handle the fuse by its plastic housing to avoid electric shock.
- Replace the Fuse: Insert a new fuse of the same amperage rating into the slot vacated by the blown fuse. Make sure the replacement fuse is securely seated in the slot.
- Test the Circuit: Once the new fuse is installed, turn on the vehicle and test the circuit to ensure that the issue has been resolved.
- Close the Fuse Box: Once you’ve confirmed that the new fuse is working properly, close the fuse box securely.
- Dispose of the Old Fuse: Dispose of the old, blown fuse properly according to local regulations.
Tips:
- Always use a fuse with the correct amperage rating to prevent electrical issues or damage to the vehicle.
FAQs
The fuse box in a 2022 Hyundai Kona N is typically located in the engine compartment or under the dashboard on the driver’s side.
To open the fuse box cover, simply press the release tab or button located on the cover and lift it off.
The fuse diagram is usually printed on the inside of the fuse box cover.
You typically only need a pair of needle-nose pliers or fuse puller tools to remove and replace a fuse.
A blown fuse will have a broken wire or a discolored appearance. You can also use a multimeter to check for continuity.
The correct fuse size should be indicated on the fuse diagram. It’s important to replace it with the same amperage rating.
No, it’s crucial to replace a blown fuse with one of the same amperage rating to avoid damaging your vehicle’s electrical system.
Use needle-nose pliers or a fuse puller tool to grip the blown fuse and gently pull it straight out of its socket.
Align the new fuse with the socket and gently press it in until it’s fully seated.
No, it’s not recommended to replace a fuse with a higher amp rating as it can lead to damage or fire hazards.
It’s a good idea to check your fuses regularly, especially if you’re experiencing electrical issues with your vehicle.
Before replacing fuses, it’s essential to disconnect the battery to prevent electrical shocks or damage.
No, you only need to replace the fuses that are blown or faulty. It’s a good idea to inspect all the fuses while you’re checking them, but only replace the ones that need it.
Useful Links:
View Full PDF: 2022 Hyundai Kona N User Guide | Auto User Guide
2024 Hyundai Kona Specs, Price, Features, Mileage And Review