2022 ACURA TLX Fuse Replacement | Fuse Diagrams Guide
Changing the fuses in a 2022 Acura TLX is an important part of keeping the car in good shape because it makes sure that the electrical parts work properly. To correctly find and replace broken fuses, you need to understand the fuse layouts. The Acura TLX’s fuse box is set up so that it is easy to get to and quick to fix any electrical problems. By using the fuse diagrams that Acura gives drivers, they can quickly find the right fuse and fix any electricity problems right away. It is very important to change fuses the right way to keep the car’s electrical systems safe. Acura’s detailed fuse diagrams make it easy to change parts, so drivers can easily take care of their TLX. The fuse box is organized and labeled in a way that makes it easy to find blown fuses and make fixes quickly. Acura TLX owners can make sure their car’s electrical system works smoothly and effectively by having the right fuse replacement instructions and diagrams on hand. Basically, the 2022 Acura TLX fuse replacement process, which is aided by detailed fuse designs, gives drivers the power to properly maintain their car’s electrical integrity.
2023 – 2024 Acura TLX Review, Price, Features and Mileage (Brochure)
Fuses
Fuse Locations
If any electrical devices are not working, set the power mode to VEHICLE OFF (LOCK) and check to see if any applicable fuse is blown.
Engine Compartment Fuse Box Type A
Fuse locations are shown on the fuse box cover. Locate the fuse in question by the fuse number and box cover number.
Located at the engine compartment on the left side. Push the tabs to open the box.
1 |
FUSE BOX MAIN | 60 A |
PREMIUM AMP* | (40 A) | |
BASE AMP* | (30 A) | |
FET MODULE 1 | 30 A | |
ST MAGNET SW | 30 A | |
WIPER MOTOR | 30 A | |
− | − |
− | (70 A) |
FUSE BOX OPTION 1 | 30 A |
− | (40 A) |
DR SEAT | 60 A |
IG MAIN | 30 A |
FET MODULE 2 | 30 A |
− | (40 A) | |
−*1 | (30 A)*1 | |
RFC 2*2 | 30 A*2 | |
3 | ABS/VSA MOTER | 40 A |
− | (40 A) | |
− | (40 A) | |
BLOWER MOTOR | 40 A |
Circuit-protected and fuse rating
- 1:2.0 L engine models
- 2:3.0 L engine models
Circuit Protected |
Amps |
|
21 | RR H/SEAT*1 | (20 A)*1 |
22 | − | − |
23 | RFC RLY*2 | 10 A*2 |
24 | AVC*2 | 20 A*2 |
25 | − | − |
26 | − | − |
27 | − | − |
28 | − | − |
29 | − | − |
30 | − | − |
31 | FUEL PUMP | 15 A |
32 | STARTER CUT | 10 A |
33 | VSA/ABS | 10 A |
34 | DR P/SEAT 1 | 30 A |
35 | DR P/SEAT 3 | 30 A |
36 | FR DEICER* | (15 A) |
37 | STRLD | 7.5 A |
38 | − | − |
39 | MISS SOL 2*1 IG FI-ECU*2 | 10 A |
40 | IGPS (LAF)*1 IGPS (PCS)*2 | 10 A |
Engine Compartment Fuse Box Type B
Located near the fuse box type A. Push the tabs to open the box.
Locate the fuse in question by the fuse number and box cover number.
Circuit-protected and fuse rating
- 1:2.0 L engine models
- 2:3.0 L engine models
Driver’s Side Interior Fuse Box
Located under the dashboard.
Fuse locations are shown on the label on the under panel.
Locate the fuse in question by the fuse number and label number.
Circuit-protected and fuse rating
MODULE |
33 | − | − | |||
11 | L SIDE DOOR LOCK | 10 A | 34 | − | − | |
12 | DR DOOR LOCK | (10 A) | 35 | ACG | 10 A | |
13 | R SIDE DOOR LOCK | 10 A | 36 | METER | 10 A | |
14 | A/C | 10 A | 37 | OPTION | 10 A | |
15 | DRL | 10 A | 38 | MOONROOF | 20 A | |
16 | CTR ACC SOCKET | 20 A | 39 | − | − | |
17 | HAZARD | 10 A | 40 | − | − | |
18 | L H/L HI | 10 A | 41 | − | − | |
19 | HORN | 15 A | 42 | HEATED STEERING WHEEL* | (10 A) | |
20 | IMG | 10 A | 43 | − | − | |
21 | DR DOOR UNLOCK | (10 A) | 44 | − | − | |
22 | − | − | 45 | TCU | 10 A | |
23 | − | − | 46 | SRS | 10 A | |
24 | − | − | 47 | − | − | |
25 | − | − | 48 | SBW | 10 A | |
26 | − | − | 49 | DOOR LOCK | 20 A | |
27 | − | − | 50 | FRONT ACC SOCKET | 20 A | |
28 | − | − | 51 | REAR R P/W | 20 A | |
29 FUSE BOX ENGINE 20 A COMPARTMENT | 52
53 |
RR L P/W 20 A
AS P/W 20 A |
Rear Fuse Box
Located on the left side of the cargo area. Remove the cover by pushing on the tab.
Fuse locations are shown on the cover. Locate the fuse in question by the fuse number and box cover number.
Circuit-protected and fuse rating
Trunk Room Fuse Box
Located under the trunk room near the terminal on the battery.
Models without an optional spare tyre
Pull up on the trunk floor lid strap, and remove the tool case.
Models with optional spare tyre
Pull up on the trunk floor lid strap, unscrew the wing bolt, and remove the tool case. Then, remove the compact spare tyre and battery cover.
All models
Remove the cover on the
terminal (as shown).
Replacement of this fuse should be done by a dealer.
Circuit-protected and fuse rating
Circuit Protected |
Amps |
|
a | Battery | 450 A |
b | − | 150 A |
c Jump Start Box 200 A | ||
d | − | 80 A |
e | Rear Box 1 | 70 A |
f | Fuse Box 2 | 60 A |
g | Rear Box 2 | 70 A |
Inspecting and Changing Fuses
- Set the power mode to VEHICLE OFF
(LOCK). Turn headlights and all accessories off. - Remove the fuse box cover.
- Check the large fuse in the engine compartment.
- If the fuse is blown, use a Phillips-head screwdriver to remove the screw and replace it with a new one.
- Inspect the small fuses in the engine compartment and the vehicle interior.
- If there is a blown fuse, remove it with the fuse puller and replace it with a new one.
- If there is a blown fuse, remove it with the fuse puller and replace it with a new one.
- Check the fuses on the battery in the trunk room.
- If the fuse is blown, have it replaced by a dealer.
Inspecting and Changing Fuses
NOTICE
Replacing a fuse with one that has a higher rating greatly increases the chances of damaging the electrical system.
Use the charts to locate the fuse in question and confirm the specified amperage on the fuse label.
Replace the fuse with a spare fuse of the same specified amperage.
There is a fuse puller on the back of the engine compartment fuse box cover type A.
How to Replace Fuse in 2022 ACURA TLX
Replacing a fuse can vary slightly depending on the type of fuse and the appliance or electrical device it’s for. However, the general steps for replacing a fuse in a household fuse box or in an appliance are as follows:
- Turn Off Power
- Before doing anything, make sure the power to the circuit is turned off. This is crucial for safety. If you’re replacing a fuse in a fuse box, turn off the main power switch. If it’s for an appliance, unplug it from the power source.
- Locate the Fuse
- Identify the fuse that needs to be replaced. In a fuse box, it will be a small, cylindrical object usually made of glass or ceramic with metal ends. In an appliance, it might be located near the power cord or within a compartment.
- Inspect the Fuse
- Check the fuse to see if it’s blown. In most cases, you can visually inspect the fuse to see if the metal strip inside is broken or melted. If you’re uncertain, you can use a multimeter to test for continuity.
- Select a Replacement Fuse
- Once you’ve confirmed the fuse is blown, select a replacement fuse with the same rating. This includes both the amperage rating and the voltage rating. Using a fuse with the wrong rating can be dangerous and may cause further damage.
- Replace the Fuse:
- Carefully remove the blown fuse from its holder or socket. Be gentle, as excessive force could damage the fuse holder or surrounding components. Insert the new fuse into the holder, making sure it fits securely.
- Restore Power
- After replacing the fuse, restore power to the circuit by turning the main power switch back on or by plugging in the appliance.
- Test the Circuit
- Once power is restored, test the circuit to ensure everything is working properly. If the fuse blows again immediately or shortly after restoring power, there may be an underlying issue with the circuit that needs to be addressed.
- Dispose of the Old Fuse
- Safely dispose of the old fuse. Depending on your location, there may be specific regulations for disposing of electronic components.
Always remember to prioritize safety when working with electricity.
FAQs
Fuse boxes in the 2022 Acura TLX keep electrical systems safe from damage caused by too much current flow.
In a 2022 Acura TLX, the fuse box is usually inside the car or under the hood, but this depends on the model and trim.
You can tell if a fuse in your 2022 Acura TLX has blown by a melted wire or a break in the metal strip inside the fuse.
Electrical overloads, short circuits, or broken parts are common reasons for a fuse to blow in a 2022 Acura TLX.
Yes, the 2022 Acura TLX needs fuses with certain amperage levels to make sure that the electrical circuits are properly protected.
In the 2022 Acura TLX, to get to the fuse box, you usually have to take off a cover panel that is either inside the car or under the hood.
To avoid getting an electric shock, you should disconnect the battery and let the system drain before changing the fuses in your 2022 Acura TLX.
To make sure the 2022 Acura TLX works right and is safe, it’s best to use original Acura fuses or fuses of similar quality.
Checking the fuses in your 2022 Acura TLX is a good idea every so often, especially if you have electrical problems or see parts that aren’t working right.
If you can’t find a certain fuse in your 2022 Acura TLX.
Yes, a broken fuse in a 2022 Acura TLX can cut power to many electrical parts, which can cause problems all over the car.
Some fuse problems can’t be avoided, but regular electrical repair and not overloading circuits can help keep 2022 Acura TLX fuse problems from happening too soon.
Useful Links
View Full PDF: ACURA TLX 2022 User Manual|Auto User Guide
2023 – 2024 Acura TLX Review, Price, Features and Mileage (Brochure)