2024 ACURA RDX Fuse Replacement | Fuse Diagrams Guide
Getting into the complicated but necessary world of car maintenance and focusing on the 2024 Acura RDX fuse replacement process shows a place where technical accuracy meets practical necessity. Figuring out your car’s fuse system is like figuring out the nervous system of a person—it’s a complicated network that keeps electrical problems from happening. When working on the newest Acura RDX, changing the fuses is like navigating through a maze of electrical circuits and parts, each of which is essential to the car’s safety and usefulness. With the help of detailed fuse pictures, this blog aims to take the mystery out of the process so that readers can do it with confidence and skill.
2023 Acura RDX Specs, Price, Features, Mileage (Brochure)
Fuses
Fuse Locations
If any electrical devices are not working, set the power mode to VEHICLE OFF and check to see if any applicable fuse is blown.
Fuse locations are shown on the fuse box cover. Locate the fuse in question by the fuse number and box cover number.
Engine Compartment Fuse Box Type A
Located near the battery. Push the tabs to open the box.
Circuit-protected and fuse rating
Circuit Protected |
Amps |
||
21 | VBU | 10 A | |
22 | FRT DEICER* | 15 A | |
23 | IG COIL | 15 A | |
24 | WASHER | 15 A | |
25 | MAIN FAN | 30 A | |
26 | STRLD | 7.5 A | |
27 | IGPS | 10 A | |
28 | − | − | |
29 | R H/L LO | 10 A | |
30 | L H/L LO | 10 A | |
31 | VBACT | 10 A | |
32 | IGPS (LAF) | 10 A | |
33 | − | − | |
Engine Compartment Fuse Box Type B
Fuse locations are shown on the fuse box cover. Locate the fuse in question by the fuse number and box cover number. Located near the battery. Push the tabs to open the box.
Circuit-protected and fus
Circuit Protected Amps
1 |
− | (50 A) |
ABS/VSA MTR | 40 A | |
F/B MAIN 2 | 50 A | |
F/B MAIN | 60 A | |
ABS VSA FSR | 40 A | |
WIPER | 30 A | |
IDLE STOP | 30 A | |
IDLE STOP | 30 A |
3 | − | − |
4 | 4WD | (30 A) |
5 | IG MAIN 2 | 20 A |
6 | IG MAIN | 30 A |
7 | − | − |
8 | DR P/SEAT 3 | 30 A |
9 | EBB | 40 A |
10 | TRL SMALL | (7.5 A) |
Engine Compartment Fuse Box Type C
Located near the + terminal on the battery.
Remove the cover on the + terminal (as shown).
Replacement of this fuse should be done by a dealer.
Circuit-protected and fuse rating
Circuit Protected |
Amps |
|||
a | MAIN | 150 A | ||
b | − | 70 A | ||
c | R/B 1 | 70 A | ||
d | R/B 2 | 70 A | ||
e | EPS | 70 A | ||
f | FET | 60 A |
Interior Fuse Box Type A
Located under the dashboard.
Fuse locations are shown on the label on the side panel.
Locate the fuse in question by the fuse number and label number.
Circuit-protected and fuse rating
Circuit Protected |
Amps |
||
21 | FUEL PUMP | 20 A | |
22 | FRONT ACC SOCKET | 20 A | |
23 | LEFT H/L HI | 10 A | |
24 | RIGHT H/L HI | 10 A | |
25 | DRIVER P/W | 20 A | |
26 | DR REAR DOOR UNLOCK | 10 A | |
27 | ACCESSORY | 10 A | |
28 | PASS SRS IND | 10 A | |
29 | PDM | 10 A | |
30 | ADS* | (15 A) | |
31 | REAR RIGHT P/W | 20 A | |
32 | − | − | |
33 | TRANSMISSION | 10 A | |
34 | ACG | 10 A | |
35 | DRL | 10 A | |
36 | A/C | 10 A | |
37 | AUDIO | 15 A | |
38 | DOOR LOCK | 20 A | |
39 | AS P/W | 20 A | |
A | REAR SEAT HEATER* | 20 A | |
B | − | − |
Interior Fuse Box Type B
Located under the dashboard.
Fuse locations are shown on the label on the side panel.
Locate the fuse in question by the fuse number and label number.
Circuit-protected and fuse rating
Circuit Protected |
Amps |
|||
A | METER | 10 A | ||
B | VSA | 10 A | ||
C | OPTION | 10 A | ||
D | BCM | 10 A | ||
E | AUDIO | 20 A | ||
F | BACKUP | 10 A |
Interior Fuse Box Type C
Located inside the driver’s side outer panel.
Replacement of this fuse should be done by a dealer.
Circuit-protected and fuse rating
Inspecting and Changing Fuses
- Set the power mode to VEHICLE OFF. Turn headlights and all accessories off.
- Remove the fuse box cover.
- Check the large fuse in the engine compartment.
- If the fuse is blown, use a Phillips-head screwdriver to remove the screw and replace it with a new one.
- Inspect the small fuses in the engine compartment and the vehicle interior.
- If there is a blown fuse, remove it with the fuse puller and replace it with a new one.
Inspecting and Changing Fuses
NOTICE
Replacing a fuse with one that has a higher rating greatly increases the chances of damaging the electrical system.
Use the charts to locate the fuse in question and confirm the specified amperage on the fuse label.
Replace with a fuse of the same specified amperage.
There is a fuse puller on the back of the cover of the engine compartment fuse box type A.
How to replace a fuse?
It’s pretty easy to change a fuse, but it’s important to make sure all safety rules are followed. Here is a step-by-step guide:
- Find the fuse box.
- The fuse box is usually in an easy-to-reach place in your home, like the garage, basement, or utility room. It could be outside the house in some situations. It’s usually a grey or metal box with a lid that can be taken off.
- Turn off Power:
- Turn off the power to the circuit you’re working on before you touch anything in the fuse box. To do this, flip the breaker in the main electricity panel that goes with it.
- Find the fuse that is giving you trouble:
- Find the fuse that needs to be changed and open the fuse box door. Most fuse boxes have a sign or diagram that shows which fuse goes with which circuit.
- Remove the Old Fuse:
- Take out the old fuse. Carefully hold the old fuse and pull it straight out of its hole with a fuse puller tool or a pair of needle-nose pliers. There may be a broken wire inside the glass tube if the fuse has blown.
- Pick out the right replacement fuse:
- The metal end caps of the old fuse should have an amperage number written on them. To avoid electrical dangers, it’s important to replace it with a fuse that can handle the same amount of current. If you use a fuse with a higher amperage value, the circuit could get too hot and catch fire.
- Put in the New Fuse:
- Make sure the new fuse fits properly in the empty hole before plugging it in. Do not push it in; it should just slide in.
- Close the cover on the fuse box:
- Once the new fuse is in place, safely close the cover on the fuse box.
- Install the New Fuse:
- To fix the problem, go back to the main electrical box and turn the breaker switch back to the “on” position. This will bring power back to the circuit.
- Test the Circuit:
- Make sure the electricity problem is fixed by testing the circuit. To do this, turn on any lights or machines that are hooked up to the circuit.
- Check for Problems:
- Keep an eye on the circuit for any more problems, like lights flashing or breakers going off. If the problem keeps happening, there may be an electrical problem that needs to be fixed by a professional.
Remember that it’s best to get help from a trained electrician if you’re not sure about any part of the process or if you run into any problems. When dealing with electricity, safety should always come first.
FAQs
Electrical parts that don’t work right in your 2024 Acura RDX, like lights or power windows that don’t work, are a common sign.
The switch box for your 2024 Acura RDX is most likely in the engine bay or under the dashboard on the driver’s side.
In the fuse box of your 2024 Acura RDX, look for a fuse that has a broken wire or a faded look.
In most cases, all you’ll need to change the fuses in your 2024 Acura RDX is a fuse puller or a pair of needle-nose pliers.
No, it’s important to use the right type and voltage of fuse for your 2024 Acura RDX so you don’t damage the electrical system.
Under the dashboard on the driver’s side of your 2024 Acura RDX is usually where you’ll find the fuse box. You might have to take off a cover panel to get to it.
Most of the time, the colour of a fuse doesn’t tell you anything specific about what it does. You should look at your 2024 Acura RDX’s switch diagram to figure out what each one does.
You can look in the instructions for your 2024 Acura RDX or online for a fuse diagram that fits your car’s make and model.
It is possible to change a fuse in your 2024 Acura RDX. You don’t need to be an expert in car repair to do it.
To avoid an electrical accident, make sure you turn off the engine and disconnect the battery before changing a fuse in your 2024 Acura RDX.
If you want to keep your 2024 Acura RDX’s fuse from blowing out, make sure you don’t overload the electrical system by using the right tools and fixing any problems right away.
No, it’s important to keep the safety and stability of the electrical system by replacing a blown fuse in your 2024 Acura RDX with one of the same amperage.
An experienced plumber or electrician can help you figure out what’s wrong with your 2024 Acura RDX if you can’t figure out why the fuse keeps blowing.
Yes, high temperatures or moisture can make the fuses in your 2024 Acura RDX work less well, which could cause them to fail early.
No, if one of the fuses in your 2024 Acura RDX blows, you don’t have to change them all at once. Just put in a new fuse with the same amperage as the broken one.
View Full PDF: 2024 ACURA RDX Owner’s Manual| Auto User Guide