Instrument Cluster: 2023 Renault Trafic Display Messages Guide
As soon as you climb into the driver’s seat of the 2023 Renault Trafic, you’ll notice that the instrument cluster skillfully combines innovation and usability. Your attention is drawn to a clear and accurate display of crucial information as soon as you take up the driver’s seat. Your digital copilot, the instrument cluster provides a wide range of screen messages to improve your driving experience. Every look at the screen confirms Renault’s dedication to provide a complex yet user-friendly driving experience, from vital notifications regarding vehicle status to real-time updates on navigation, entertainment, and driver aid systems. The 2023 Renault Trafic’s instrument cluster, with its user-friendly interface and smooth technological integration, keeps you informed and improves your sense of connection to the road ahead, making every trip easy and fun.
2023 Renault Traffic Specs, Price, Features, Mileage and Review
DISPLAYS AND INDICATORS
Rev counter 1
(graduations x 1000)
Speedometer
(km or miles per hour)
Overspeed buzzer
Depending on the vehicle, a buzzer sounds for approximately 10 seconds every 40 seconds, as long as the vehi-cle is travelling in excess of 72 mph (120 km/h).
Driving style indicator 4
Please refer to the information on “Eco-driving” in Section 2.
Low engine oil level warning
When the engine is started, display 3 alerts the driver when the oil level is at its minimum. Refer to the information on the “Engine oil level” in Section 4.
Fuel gauge 5
Instrument panel 6 in miles
(option to switch to km/h)
- With ignition off, press button 9 or 10 at the end of stalk 7 and the start button 8;
- the speedometer unit indicator flashes for approximately ten seconds, then the new unit is displayed: release button 9 or 10 when the unit stops flashing.
To return to the previous mode, repeat the same operation.
Note: once the battery is switched off, the trip computer and warning system automatically returns to the original unit of measurement.
ON-BOARD COMPUTER: general information
On-board computer 1
Depending on the vehicle, this includes the following functions:
- distance travelled;
- journey settings;
- information messages;
- operating fault messages (con-nected to the © warning light);
- warning messages (connected to the ® warning light).
All these functions are described on the following pages.
Display selection keys 2 and 3
Scroll through the following information upwards (key 2) or downwards (key 3) by pressing briefly and successively (the display depends on the vehicle equipment and country).
- Total mileage and trip mileage recorder;
- fuel used;
- average fuel consumption;
- current fuel consumption;
- estimated range with remaining fuel;
- distance travelled;
- average speed;
- mileage before service, oil change counter;
- reset the tyre pressure;
- cruise control/speed limiter programmed speed;
- clock and temperature;
- trip log, operating faults and informa-tion message readout;
- percentage volume of remaining rea-gent.
ON-BOARD COMPUTER: general information
Resetting the trip mileage
With “trip mileage recorder” selected on the display, press button 2 or 3 until the mileage recorder resets to zero.
Resetting the journey parameters (reset button)
With one of the trip parameters selected as the display, press and hold button 2 or 3 until the display resets.
Interpreting some of the values displayed after resetting
The values showing average fuel con-sumption, range and average speed will become more stable and reliable the further you travel after pressing the reset button.
For the first few miles after pressing the reset key you will notice that the range increases as you travel. This range takes into account the average fuel consumption since the last time the reset button was pressed. Therefore, the average fuel consumption may decrease when:
- the vehicle stops accelerating;
- the engine reaches its operating temperature (if the engine was cold when the reset key was pressed);
- when driving from an urban area onto the open road.
Automatic resetting of the journey parameters
Resetting occurs automatically when the maximum value of any of the parameters is exceeded.
ON-BOARD COMPUTER: trip settings
The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.
Examples of selections |
Interpreting the display selected |
101778 km 112.4 km FUEL USED 8L |
Total mileage and trip mileage recorder.
Journey parameters.
Fuel used Fuel consumed since the last reset. Average fuel consumption since the last reset. The value is displayed after having travelled at least 400 metres since the last reset. Current fuel consumption. This value is displayed after a speed of approximately 20 mph (30 km/h) is reached. |
Examples of selections |
Interpreting the display selected |
RANGE 541 km DISTANCE 522 km AVERAGE 89.4 km/h |
Estimated range with remaining fuel. Distance travelled since last reset. Average speed since the last reset. The value is displayed after driving 400 metres. |
Examples of selections |
Interpreting the display selected |
|
On-board computer with distance before next service message (cntd.) |
||
SERVICE INTERVALS |
OIL CHANGEIN 30 000 km / 24 MO |
With the ignition switched on and the engine not running, when the message “SERVICE INTERVALS” is displayed, press button 2 or 3 for around 5 seconds to display the mileage before the next service (distance or time remaining before the next oil change). When the distance value approaches its limit, there are several possible scenarios:
The vehicle requires an oil change as soon as possible. |
|
SERVICEDUE IN |
|
300 km / 24 DAYS |
||
|
SERVICE REQUIRED |
|
Depending on the vehicle, the mileage before an oil change varies according to the driving style (frequent driving at low speed, door-to-door journeys, extensive use at idling speed, towing a trailer, etc.). The distance remaining until the next oil change can therefore decrease more quickly in some cases than the actual distance travelled. |
Examples of selections |
Interpreting the display selected |
TYRE PRESSURE SET <PRESS-HOLD> CRUISE CONTROL NO MESSAGE MEMORISED ADBLUE 62% |
Please refer to the information on the “Tyre pressure loss warning” in Section 2.
Refer to the information on the “Speed limiter” and “Cruise control” in Section 2.
Please refer to the information on the “Clock and exterior temperature” in Section 1.
Successive display:
Refer to the information on “Reagent tank” in Section 1. |
TRIP COMPUTER AND WARNING SYSTEM: operating fault messages
These appear with the © warning light and mean that you should drive very carefully to an authorised dealer as soon as possible. If you fail to follow this recommendation, you risk damaging your vehicle.
They disappear when the display selection key is pressed or after several seconds and are stored in the computer log. The © warning light stays on. Examples of operating fault messages are given in the following pages.
Examples of messages |
Interpreting the display selected |
« PARKING BRAKE ON » |
Indicates that the parking brake has been applied. |
« BATTERY LOW START ENGINE » |
Indicates that the vehicle must be started to recharge the battery (e.g. after the engine has been switched off for some time whilst listening to the radio). |
« TOP UP OIL LEVEL » |
Indicates that the oil level needs adjusting. |
« AUTO DOOR LOCK OFF » |
Indicates that the automatic door locking while driving is deactivated. |
« STEERING WHEEL NOT LOCKED » |
Indicates that the steering column has not been locked. |
TRIP COMPUTER AND WARNING SYSTEM: warning message
These appear with the ® warning light and require you to stop immediately, for your own safety, as soon as traffic conditions allow. Stop your engine and do not restart it. Contact an approved Dealer.
Examples of warning messages are given in the following pages.
Note:
the messages appear on the display either individually or alternately (when there are several messages to be displayed), and may be accompanied by a warning light and/or a beep.
Examples of messages |
Interpreting the display selected |
« CLEAN DIESEL FILTER » “CHECK VEHICLE” “CHECK AIRBAG” “Check antipollution system” |
Indicates the presence of water in the diesel filter; contact an approved Dealer as soon as possible.
|
TRIP COMPUTER AND WARNING SYSTEM: warning message
These appear with the ® warning light and require you to stop immediately, for your own safety, as soon as traffic conditions allow. Stop your engine and do not restart it. Contact an approved Dealer.
Examples of warning messages are given in the following pages.
Note
the messages appear on the display either individually or alternately (when there are several messages to be displayed), and may be accompanied by a warning light and/or a beep.
Examples of messages |
Interpreting the display selected |
« GEAR BOX RISK OF BREAKAGE » |
Indicates an injection fault, the vehicle’s engine has overheated or there is a serious engine fault. |
« Braking system fault » |
Indicates a fault in the braking system. |
« BATTERY CHARGING FAULT » |
Indicates a fault in the vehicle battery charging circuit (alternator etc.). |
« PUNCTURE « |
Indicates that at least one wheel is punctured or severely underinflated. |
FAQs
The most typical screen messages on the 2023 Renault Trafic instrument cluster include low fuel warnings, open doors, and maintenance reminders.
The 2023 Renault Trafic instrument cluster displays a warning sign indicating low tire pressure, prompting the driver to check it right away.
The 2023 Renault Trafic instrument cluster displays real-time engine temperature data and informs the driver when the engine overheats.
The 2023 Renault Trafic instrument cluster displays maintenance notifications when it detects the need for oil changes, filter replacements, or other planned maintenance activities.
If the 2023 Renault Trafic instrument cluster detects any defective external lights, it will display a warning message, encouraging the driver to examine and replace the bulbs.
When the fuel level in the 2023 Renault Trafic is critically low, the instrument cluster warns the driver to refuel promptly.
If the 2023 Renault Trafic instrument cluster detects a braking system issue, such as low brake fluid or brake pad wear, it will display a warning message.
In the event of an issue with the engine’s electronic systems, the 2023 Renault Trafic instrument cluster displays a warning message indicating an electronic system malfunction.
If a door or trunk is left open while the vehicle is in motion, the 2023 Renault Trafic instrument cluster will display a warning message indicating which one is open.
The 2023 Renault Trafic instrument cluster displays real-time vehicle speed and RPM readings, allowing the driver to monitor the vehicle’s performance.
If there is an issue with the fuel injection system, the 2023 Renault Trafic instrument cluster will display a warning message indicating a problem with fuel supply.
When the engine oil level is low, the 2023 Renault Trafic instrument cluster displays a warning message, instructing the driver to check the oil level and replace as needed.
If there is an issue with the vehicle’s battery, the 2023 Renault Trafic instrument cluster will display a warning message indicating low battery voltage or a charging system malfunction.
If the 2023 Renault Trafic instrument cluster identifies problems with the exhaust emissions system, such as high emissions or a faulty catalytic converter, it will display warning signals.
If the engine is at risk of overheating, the 2023 Renault Trafic instrument cluster will display a warning message.
Useful Links
View Full PDF: 2023 Renault Trafic User Manual|Auto User Guide
2023 Renault Traffic Specs, Price, Features, Mileage and Review