2024 Alfa Romeo Stelvio Fuses and Fuse Box Owner’s Manual
The 2024 Alfa Romeo Stelvio has an exquisitely crafted fuse box that effortlessly combines state-of-the-art technology with easily accessible controls, guaranteeing maximum performance and safety.
2024 Alfa Romeo STELVIO Specs, Price, Features, Mileage And Review
Alfa Romeo FUSES Guide
General Information
The fuses protect electrical systems against excessive current.
When a device does not work, you must check the electrical circuit inside of the fuse for a break/melt.
Also, please be aware that using power outlets for extended periods with the engine off may result in vehicle battery discharge.
Blade Fuses
- Electrical Circuit
- Blade Fuse With Good Electrical Circuit
- Blade Fuse With Bad Electrical Circuit
J-CASE Fuse
- Electrical Circuit
- Case Fuse With Good Electrical Circuit
- Case Fuse With Bad Electrical Circuit
Fuse Extracting Pliers
To replace a fuse, use the pliers hooked to the fuse box.Grab the pliers from the upper tabs, press them, and extract the pliers pulling upwards.
The pliers have two different ends, both of which are specifically designed to remove the different types of fuses present in the vehicle:
- MINIFuse
- J-CASE Fuse
After use, return the pliers to their proper position using the following procedures:
- Grasp the pliers from the upper tabs and insert them into their housing.
- Push downward on the pliers into their housing until they click into place.
WARNING!
- When replacing a blown fuse, always use an appropriate replacement fuse with the same amp rating as the original fuse. Never replace a fuse with another fuse of a higher amp rating. Never replace a blown fuse with metal wires or any other material. Do not place a fuse inside a circuit breaker cavity or vice versa. Failure to use proper fuses may result in serious personal injury, fire and/or property damage.
- Before replacing a fuse, make sure that the ignition is off and that all the other services are switched off and/or disengaged.
- If the replaced fuse blows again, contact an authorized dealer.
- If a general protection fuse for safety systems (air bag system, braking system), power unit systems (engine system, transmission system) or steering system blows, contact an authorized dealer.
Fuse Location
The fuses, which can be replaced by the user, are grouped in two boxes below the passenger side footboard and inside the luggage compartment.
Control Unit Under Passenger Side Footboard
To access the fuses, proceed as follows:
- Lift the upper end of the footboard on the passenger side, pulling to release the two buttons.
Release Buttons On Footboard
- Footboard
- Unscrewing the two hooks, remove the panel pulling downward.
Release Hooks On Footboard
- Panel
The fuses are freely accessible on the control unit.
After replacing the fuse, make sure that the panel and footboard are correctly locked.
Control Unit Under Passenger Side Footboard
FUNCTION | FUSE | AMPERAGE |
Front power window (driver’s side) | F33 | 25 |
Front power window (passenger side) | F34 | 25 |
Supply for Information and Entertainment system, Climate Control system, alarm, power door mirror folding, EOBD system, USB port | F36 | 15 |
Safe Lock device (driver side door unlock – if equipped), doors unlock, central lock | F38 | 20 |
Windshield washer pump | F43 | 20 |
Rear left power window | F47 | 25 |
Rear right power window | F48 | 25 |
Heater rear window coil | F94 | 15 |
Luggage Compartment Fuse Box
To access the fuses, proceed as follows:
- Lift the luggage compartment cover.
- Remove the control unit cover.
Control Unit
The fuses are freely accessible on the control unit.
The number identifying the electrical component corresponding to each fuse is shown on the cover. After replacing a fuse, make sure that you have closed the cover correctly.
Luggage Compartment Fuse Box
FUNCTION | FUSE | AMPERE |
Receiver module (TTM/TTEBM) | F01 | 40 |
Hi-Fi system | F08 | 30 |
I-Drive / USB Socket / AUX / USB Charger | F21 | 10 |
Trailer light control unit power supply (+30) | F1 | 20 |
Trailer light control unit power supply (+30) | F2 | 15 |
Trailer socket (only EMEA) (+30) | F3 | 10 |
Tow bar (+15) | F4 | 10 |
2024 Alfa Romeo STELVIO Specs, Price, Features, Mileage And Review
How to replace the Fuse of the 2024 Alfa Romeo Stelvio
Replacing a fuse in a 2024 Alfa Romeo Stelvio is a straightforward process. Here’s a general guide on how to do it:
Materials:
- The new fuse of the correct amperage.
- Fuse puller or needle-nose pliers.
Instructions:
-
Locate the Fuse Box: The fuse box in most cars, including the Alfa Romeo Stelvio, is typically located either under the dashboard on the driver’s side or under the hood.
-
Identify the Blown Fuse: Inside the fuse box, you’ll find several fuses. You can identify the blown fuse by visually inspecting it. If the metal strip inside the fuse is broken or melted, it needs to be replaced.
-
Determine the Correct Replacement Fuse: The fuse box cover or your car’s will have a diagram indicating which fuse corresponds to which electrical component. Make sure you choose a replacement fuse with the same amperage rating as the blown fuse. Using a fuse with a higher or lower rating can cause electrical issues or damage to your vehicle.
-
Remove the Blown Fuse: Using a fuse puller tool or a pair of needle-nose pliers, carefully grasp the blown fuse and pull it straight out of its socket. Be gentle to avoid damaging the fuse box or surrounding components.
-
Insert the Replacement Fuse: Take the new fuse and insert it into the empty socket. Make sure it’s seated properly and fits snugly.
-
Test the Circuit: After replacing the fuse, test the electrical component associated with that fuse to ensure it’s functioning correctly.
-
Replace the Fuse Box Cover: Once you’ve replaced the fuse and verified that everything is working, replace the fuse box cover.
-
Dispose of the Old Fuse: Safely dispose of the blown fuse. You can recycle it if your local recycling facility accepts electronic components.
Tips:
- Always use a fuse with the correct amperage rating to prevent electrical issues or damage to the vehicle.
- If a fuse blows repeatedly, it may indicate an underlying electrical problem and professional assistance may be needed.
FAQs
The fuse box in the 2024 Alfa Romeo Stelvio is typically located in the engine compartment.
The 2024 Alfa Romeo Stelvio generally has one fuse box located in the engine compartment.
The 2024 Alfa Romeo Stelvio typically uses blade-type fuses.
To access the fuse box, you usually need to open the hood of the vehicle and locate the fuse box cover near the battery.
The fuse box cover usually displays a diagram detailing the location and function of each fuse.
Common fuse ratings in the 2024 Alfa Romeo Stelvio include 5A, 10A, 15A, 20A, and 30A.
You can visually inspect the fuse to see if the metal strip inside is intact or broken.
If a fuse is blown, it means that there has been an electrical overload in the circuit it protects.
To replace a blown fuse, you need to pull it out using fuse pullers or needle-nose pliers and insert a new fuse of the same rating.
Common components include headlights, taillights, power windows, radio, and air conditioning systems.
No, the 2024 Alfa Romeo Stelvio typically uses blade-type fuses, not mini fuses.
It’s not recommended to add additional fuses to the fuse box as it can lead to electrical issues and potentially damage the vehicle’s wiring.
It’s important to disconnect the vehicle’s battery before working with the fuse box to prevent electrical shock or damage.
It’s a good idea to periodically check the fuses, especially if you’re experiencing electrical issues with the vehicle.
Fuse pullers or needle-nose pliers are typically used to remove and replace fuses in the 2024 Alfa Romeo Stelvio.
The fuse box cover helps protect the fuses from moisture, but it’s not completely waterproof.
Useful Links
2024 Alfa Romeo STELVIO Specs, Price, Features, Mileage And Review