2022 ACURA TLX Fuse Replacement | Fuse Diagrams Guide

2022 ACURA TLX Fuse Replacement | Fuse Diagrams Guide

Changing the fuses in a 2022 Acura TLX is an important part of keeping the car in good shape because it makes sure that the electrical parts work properly. To correctly find and replace broken fuses, you need to understand the fuse layouts. The Acura TLX’s fuse box is set up so that it is easy to get to and quick to fix any electrical problems. By using the fuse diagrams that Acura gives drivers, they can quickly find the right fuse and fix any electricity problems right away. It is very important to change fuses the right way to keep the car’s electrical systems safe. Acura’s detailed fuse diagrams make it easy to change parts, so drivers can easily take care of their TLX. The fuse box is organized and labeled in a way that makes it easy to find blown fuses and make fixes quickly. Acura TLX owners can make sure their car’s electrical system works smoothly and effectively by having the right fuse replacement instructions and diagrams on hand. Basically, the 2022 Acura TLX fuse replacement process, which is aided by detailed fuse designs, gives drivers the power to properly maintain their car’s electrical integrity.

2023 – 2024 Acura TLX Review, Price, Features and Mileage (Brochure)

Fuses

Fuse Locations
If any electrical devices are not working, set the power mode to VEHICLE OFF (LOCK) and check to see if any applicable fuse is blown.

Engine Compartment Fuse Box Type A

Fuse locations are shown on the fuse box cover. Locate the fuse in question by the fuse number and box cover number.
Located at the engine compartment on the left side. Push the tabs to open the box.

1	FUSE BOX MAIN	60 A
	PREMIUM AMP*	(40 A)
	BASE AMP*	(30 A)
	FET MODULE 1	30 A
	ST MAGNET SW	30 A
	WIPER MOTOR	30 A
	−	−

−	(70 A)
FUSE BOX OPTION 1	30 A
−	(40 A)
DR SEAT	60 A
IG MAIN	30 A
FET MODULE 2	30 A

	−	(40 A)
	−*1	(30 A)*1
	RFC 2*2	30 A*2
3	ABS/VSA MOTER	40 A
	−	(40 A)
	−	(40 A)
	BLOWER MOTOR	40 A

Circuit-protected and fuse rating

• 1:2.0 L engine models
• 2:3.0 L engine models

	Circuit Protected	Amps
21	RR H/SEAT*1	(20 A)*1
22	−	−
23	RFC RLY*2	10 A*2
24	AVC*2	20 A*2
25	−	−
26	−	−
27	−	−
28	−	−
29	−	−
30	−	−
31	FUEL PUMP	15 A
32	STARTER CUT	10 A
33	VSA/ABS	10 A
34	DR P/SEAT 1	30 A
35	DR P/SEAT 3	30 A
36	FR DEICER*	(15 A)
37	STRLD	7.5 A
38	−	−
39	MISS SOL 2*1 IG FI-ECU*2	10 A
40	IGPS (LAF)*1 IGPS (PCS)*2	10 A

Engine Compartment Fuse Box Type B

Located near the fuse box type A. Push the tabs to open the box.

Locate the fuse in question by the fuse number and box cover number.

Circuit-protected and fuse rating

• 1:2.0 L engine models
• 2:3.0 L engine models

Driver’s Side Interior Fuse Box

Located under the dashboard.

Fuse locations are shown on the label on the under panel.
Locate the fuse in question by the fuse number and label number.

Circuit-protected and fuse rating

	MODULE			33	−	−
11	L SIDE DOOR LOCK	10 A		34	−	−
12	DR DOOR LOCK	(10 A)		35	ACG	10 A
13	R SIDE DOOR LOCK	10 A		36	METER	10 A
14	A/C	10 A		37	OPTION	10 A
15	DRL	10 A		38	MOONROOF	20 A
16	CTR ACC SOCKET	20 A		39	−	−
17	HAZARD	10 A		40	−	−
18	L H/L HI	10 A		41	−	−
19	HORN	15 A		42	HEATED STEERING WHEEL*	(10 A)
20	IMG	10 A		43	−	−
21	DR DOOR UNLOCK	(10 A)		44	−	−
22	−	−		45	TCU	10 A
23	−	−		46	SRS	10 A
24	−	−		47	−	−
25	−	−		48	SBW	10 A
26	−	−		49	DOOR LOCK	20 A
27	−	−		50	FRONT ACC SOCKET	20 A
28	−	−		51	REAR R P/W	20 A
29          FUSE BOX ENGINE        20 A COMPARTMENT				52 53	RR L P/W                      20 A AS P/W                        20 A

Rear Fuse Box

Located on the left side of the cargo area. Remove the cover by pushing on the tab.

Fuse locations are shown on the cover. Locate the fuse in question by the fuse number and box cover number.

Circuit-protected and fuse rating

Trunk Room Fuse Box

Located under the trunk room near the terminal on the battery.

Models without an optional spare tyre
Pull up on the trunk floor lid strap, and remove the tool case.

Models with optional spare tyre
Pull up on the trunk floor lid strap, unscrew the wing bolt, and remove the tool case. Then, remove the compact spare tyre and battery cover.

All models
Remove the cover on the

terminal (as shown).
Replacement of this fuse should be done by a dealer.

Circuit-protected and fuse rating

	Circuit Protected	Amps
a	Battery	450 A
b	−	150 A
c                Jump Start Box                200 A
d	−	80 A
e	Rear Box 1	70 A
f	Fuse Box 2	60 A
g	Rear Box 2	70 A

Inspecting and Changing Fuses

1. Set the power mode to VEHICLE OFF
   (LOCK). Turn headlights and all accessories off.
2. Remove the fuse box cover.
3. Check the large fuse in the engine compartment.
   • If the fuse is blown, use a Phillips-head screwdriver to remove the screw and replace it with a new one.
4. Inspect the small fuses in the engine compartment and the vehicle interior.
   • If there is a blown fuse, remove it with the fuse puller and replace it with a new one.
5.  Check the fuses on the battery in the trunk room.
   • If the fuse is blown, have it replaced by a dealer.

Inspecting and Changing Fuses

NOTICE
Replacing a fuse with one that has a higher rating greatly increases the chances of damaging the electrical system.
Use the charts to locate the fuse in question and confirm the specified amperage on the fuse label.
Replace the fuse with a spare fuse of the same specified amperage.
There is a fuse puller on the back of the engine compartment fuse box cover type A.

How to Replace Fuse in 2022 ACURA TLX

Replacing a fuse can vary slightly depending on the type of fuse and the appliance or electrical device it’s for. However, the general steps for replacing a fuse in a household fuse box or in an appliance are as follows:

1. Turn Off Power
   • Before doing anything, make sure the power to the circuit is turned off. This is crucial for safety. If you’re replacing a fuse in a fuse box, turn off the main power switch. If it’s for an appliance, unplug it from the power source.
2. Locate the Fuse
   • Identify the fuse that needs to be replaced. In a fuse box, it will be a small, cylindrical object usually made of glass or ceramic with metal ends. In an appliance, it might be located near the power cord or within a compartment.
3. Inspect the Fuse
   • Check the fuse to see if it’s blown. In most cases, you can visually inspect the fuse to see if the metal strip inside is broken or melted. If you’re uncertain, you can use a multimeter to test for continuity.
4. Select a Replacement Fuse
   • Once you’ve confirmed the fuse is blown, select a replacement fuse with the same rating. This includes both the amperage rating and the voltage rating. Using a fuse with the wrong rating can be dangerous and may cause further damage.
5. Replace the Fuse:
   • Carefully remove the blown fuse from its holder or socket. Be gentle, as excessive force could damage the fuse holder or surrounding components. Insert the new fuse into the holder, making sure it fits securely.
6. Restore Power
   • After replacing the fuse, restore power to the circuit by turning the main power switch back on or by plugging in the appliance.
7. Test the Circuit
   • Once power is restored, test the circuit to ensure everything is working properly. If the fuse blows again immediately or shortly after restoring power, there may be an underlying issue with the circuit that needs to be addressed.
8. Dispose of the Old Fuse
   • Safely dispose of the old fuse. Depending on your location, there may be specific regulations for disposing of electronic components.

Always remember to prioritize safety when working with electricity.

FAQs

Useful Links

View Full PDF: ACURA TLX 2022 User Manual|Auto User Guide

2023 – 2024 Acura TLX Review, Price, Features and Mileage (Brochure)

2022 ACURA TLX Multi-Information Display Setting Guide