2024 ACURA Integra Fuses and Fuse Box | How to fix a blown fuse
As with all modern cars, the 2024 Acura Integra has a complicated electrical system that powers many parts. The fuses and fuse boxes in the car are very important for protecting this system because they stop electrical overloads that could harm electronics or even pose a safety risk. The fuse box is usually in an easy-to-reach place in the car. It holds several fuses, each of which protects a different circuit. These fuses are made to “blow” when they are exposed to too much electricity, protecting the connected parts from damage. If your Acura Integra has electrical problems like lights not working, power windows not working, or other problems, a blown switch could be the cause. To fix this, first look in your car’s instructions for the fuse that goes to the part that is giving you trouble. Once you’ve found it, replace the blown fuse with an easy-to-find one of the same amperage at an auto parts shop. This simple step helps make sure that the electrical systems in your Acura Integra will continue to work well and be reliable. When working with switches and other electrical parts, you should always be careful and follow safety rules.
2024 Acura INTEGRA Review, Price, Features And Mileage (Brochure)
Fuses
Fuse Locations
If any electrical devices are not working, set the power mode to VEHICLE OFF and check to see if any applicable fuse is blown.
Engine Compartment Fuse Box
Located near the battery. Push the tabs to open the box.
Fuse locations are shown on the fuse box cover. Locate the fuse in question by the fuse number and box cover number.
Circuit-protected and fuse rating
- :1.5 L engine models
- :2.0 L engine models
Circuit Protected | Amps | |
1 | BATTERY | 125 A |
– | 40 A | |
– | 40 A | |
F/BOX OPTION | 60 A | |
2 | – | 40 A |
F/BOX OPTION2 | 40 A | |
DC/DC2 | 30 A | |
F/BOX MAIN | 60 A | |
3 | – | 30 A |
– | 30 A | |
– | 70 A | |
RR DEFROSTER | 30 A | |
– | 40 A | |
– | 30 A | |
HTR MTR | 40 A | |
4 | – | 30 A |
ABS/VSA MTR | 40 A | |
DC/DC | 30 A | |
– | 30 A | |
IG MAIN | 30 A | |
R/M1 | 30 A | |
R/M2 | 30 A | |
5 | ST MAGNETIC SW | 30 A |
WIPER | 30 A | |
EPS | 70 A | |
RFC*2 | 30 A 50 A |
|
ABS/VSA FSR | 40 A | |
MAIN FAN | 30 A | |
F/BOX MAIN2 | 40 A | |
6 | SUB FAN | (30 A) |
7 | IG MAIN2 | 30 A |
8 | ACTIVE EXHAUST VALVE*2 | (7.5 A) |
9 | EVP* | (30 A) |
10 | AUDIO SUB*2 | (7.5 A) |
11 | – | – |
12 | – | – |
13 | H/STRG BATT SNSR* | 10 A |
14 | – | – |
15 | FR FOG* | (10 A) |
16 | MG CLUTCH | 10 A |
17 | WASHER | 15 A |
18 | HORN | 15 A |
19 | BACK UP | 15 A |
20 | AUDIO | (15 A) |
21 | RFC RLY CL+ | (7.5 A) |
22 | DBW | 15 A |
23 | – | – |
24 | BACKUP FI ECU | 10 A |
25 | IGP | 15 A |
26 | TCU* | (15 A) |
27 | LCM L | 15 A |
28 | INJ | (15 A) |
29 | STOP | 10 A |
30 | LCM R | 15 A |
31 | IG COIL | 15 A |
32 | – | – |
33 | HAZARD | 15 A |
34 | AUDIO SUB VST | (7.5 A) |
35 | – | – |
36 | AUDIO VST MAIN | (30 A) |
37 | BACKUP2 | (30 A) |
38 | – | – |
39 | IG1 MON2*2 | (7.5 A) |
40 | VBACT | (10 A) |
41 | IGPS [LAF] | 10 A |
42 | IG1 MON2*1 | (7.5 A) |
Interior Fuse Box
Located under the dashboard.
Fuse locations are shown on the label under the steering column. Locate the fuse in question by the fuse number and label number.
Circuit-protected and fuse rating
Circuit Protected | Amps | |
1 | P/W DR | 20 A |
2 | P/W AS | 20 A |
3 | P/W RR R | 20 A |
4 | P/W RR L | 20 A |
5 | OPTION | 10 A |
6 | SRS | 10 A |
7 | T/G MTR / TRUNK ACT | 10 A |
8 | IDAS / HUD | (10 A) |
9 | FR ACC SOCKET | 20 A |
10 | DOOR LOCK | 20 A |
11 | METER | 10 A |
12 | OPTION3 (ST CUT) | 10 A |
13 | – | – |
14 | OPTION6 (VB SOL) | 10 A |
15 | DR DOOR UNLOCK | 10 A |
16 | SUNROOF* | 20 A |
17 | – | – |
18 | – | – |
19 | – | – |
20 | – | – |
21 | – | – |
22 | SMART | 10 A |
23 | DR DOOR LOCK | 10 A |
24 | – | – |
25 | IMG | 10 A |
26 | SRS | 10 A |
27 | ST CUT RLY | 10 A |
28 | OPTION5 | 10 A |
29 | FUEL PUMP | 15 A |
30 | L SIDE DOOR UNLOCK | 10 A |
31 | R SIDE DOOR UNLOCK | 10 A |
32 | – | – |
33 | – | – |
34 | – | – |
35 | – | – |
36 | – | – |
37 | – | – |
38 | – | – |
39 | R-SIDE DOOR LOCK | 10 A |
40 | P/SEAT REC / RR HI | 20 A |
41 | P/SEAT SLIDE / FR HI | 20 A |
42 | BACK LT | (7.5 A) |
43 | A/C | 10 A |
44 | DRL | 10 A |
45 | ACC | 10 A |
46 | ACC KEY LOCK | 10 A |
47 | L SIDE DOOR LOCK | 10 A |
48 | H/SEAT | 20 A |
49 | AS P/SEAT REC* | (20 A) |
50 | P/LUMBAR DR* | (10 A) |
51 | – | – |
52 | RR H/SEAT* | (20 A) |
53 | AS P/SEAT SLI* | (20 A) |
54 | OPTION1 / FUEL LID | 10 A |
55 | AUDIO AMP* | (30 A) |
56 | ADS* | (30 A) |
Sub-Fuse Box
1.5 L engine models
Circuit Protected | Amps | |
A | BACKUP2 MAIN | (10 A) |
B | AUDIO SUB VST | (7.5 A) |
C | ACC VST | (10 A) |
D | VST 1 | (10 A) |
E | AUDIO VST | (15 A) |
F | EOP | (20 A) |
G | – | – |
H | VST 2 | (10 A) |
Inspecting and Changing Fuses
- Set the power mode to VEHICLE OFF. Turn headlights and all accessories off.
- Remove the fuse box cover.
- Check the main fuse in the engine compartment fuse box.
- Look at the fuse through the hole.
- If the fuse is blown, have it replaced by a dealer.
- Check the combined fuses in the engine compartment fuse box.
- Look into the space between the fuses.
- If the fuse is blown, have it replaced by a dealer.
- Inspect the small fuses in the engine compartment and the vehicle interior.
- If there is a blown fuse, remove it with the fuse puller and replace it with a new one.
Inspecting and Changing Fuses
There is a fuse puller on the back of the engine compartment fuse box cover.
NOTICE
Replacing a fuse with one that has a higher rating greatly increases the chances of damaging the electrical system.
Use the charts to locate the fuse in question and confirm the specified amperage on the fuse label.
FAQs
The fuse box in the 2024 Acura Integra is typically located in the engine compartment, near the battery. It may also have an interior fuse box located in the driver or passenger side footwell.
There are usually two fuse boxes in the 2024 Acura Integra, one in the engine compartment and another in the interior of the vehicle.
You may need a fuse puller or a pair of needle-nose pliers to remove and replace fuses.
Regularly check and maintain electrical components, avoid overloading circuits, and promptly address any electrical issues to prevent blown fuses.
Fuses in the 2024 Acura Integra protect electrical components by breaking the circuit in case of an overload, preventing damage.
Check for a melted or broken metal strip inside the fuse. You can also use a multimeter to test for continuity.
The 2024 Acura Integra may use standard blade fuses, mini blade fuses, or other types.
It is not recommended to use a higher amp fuse, as it may damage the electrical components. Always replace with the same amp rating.
Turn off the vehicle, locate the fuse box, identify the blown fuse, use fuse pullers to remove it, and replace it with a new fuse of the same rating.
The vehicle may come with a spare fuse kit. Check the owner’s manual or the fuse box cover for details.
On the fuse box cover identify the function of each fuse.
Overloading a circuit, electrical faults, or a malfunctioning component can cause fuses to blow.
Yes, a blown fuse can disrupt the function of multiple electrical components in the vehicle.
If you are unsure or uncomfortable handling electrical issues, it’s recommended to seek assistance from a professional mechanic.
Useful Link:
View Full PDF: 2024 ACURA Integra Owner’s Manual | Auto User Guide
2024 Acura INTEGRA Review, Price, Features And Mileage (Brochure)