2024 ACURA Integra Owner’s Manual

2024 ACURA Integra Owner’s Manual

A much-anticipated reintroduction of a popular nameplate, the 2024 Acura Integra promises to infuse new life into the small sports car market. Acura brought the Integra back to life with the goal of providing an exhilarating driving experience by fusing cutting-edge technology with dynamic performance. The 2024 Integra’s energetic and youthful appeal are highlighted by its elegant and streamlined form. It usually has a turbocharged engine under the hood, which promises quick acceleration and agile handling for an exciting ride. Drivers and passengers may anticipate a comfortable and high-tech interior with amenities that improve connectivity and convenience. The 2024 Acura Integra revives the spirit of the legendary vehicle and presents a strong choice for fans and anybody looking for a thrilling ride in a small package.

Driver Attention Monitor

The Driver Attention Monitor analyzes steering inputs to determine if the vehicle is being driven in a manner consistent with drowsy or inattentive driving. If it determines that the vehicle is being driven in such a manner, it will display the degree of the driver’s attention on the driver information interface. When you select Driver Attention Monitor on the driver information interface, bars on it light up in white to indicate the degree of the driver’s attention.

Driver Attention Monitor
The Driver Attention Monitor cannot always detect if the driver is tired or inattentive. Regardless of the system’s feedback, if you are feeling tired, stop in a safe location and rest for as long as needed.

If two bars light up, the Driver attention level low message will appear.
If one bar lights up, the Driver’s attention level is low. Time for a break. message will appear, a beep will sound, and the steering wheel will vibrate. If this message appears, stop in a safe location and rest for as long as needed. The message will disappear when the right selector wheel is rolled or when the system has determined that the driver is driving normally. If the driver does not take a break and the monitor continues to detect that the driver is very tired, the message will appear again after approximately 15 minutes, accompanied by a beep and steering wheel vibrations. The message does not appear when the travelling time is 30 minutes or less.

The Driver Attention Monitor resets when:

• The engine is turned off.
• The driver unfastens the seat belt and opens the door while the vehicle is stopped.

For the Driver Attention Monitor to function:

• The vehicle must be traveling above 25 mph (40 km/h).
• The electric power steering (EPS) system indicator must be off.

Depending on driving conditions or other factors, the Driver Attention Monitor may not function in the following circumstances:

• The steering assist function of the Lane Keeping Assist System (LKAS) is active. 2 Lane Keeping Assist System (LKAS) P. 553
• The condition of the road is poor; e.g., the surface is unpaved or bumpy.
• It is windy.
• The driver is frequently operating the vehicle in an assertive manner, such as changing lanes or accelerating.

Safety Support
Indicates the status of the Road Departure Mitigation system, CMBSTM, Low-Speed Braking Control*, blind spot information system, and parking sensor system*, such as On, Off, or Failure, by colour and letters.

The following colours indicate the status of any of the above-mentioned systems:

• Green: The system is on.
• Gray: The system is off.
• Amber: There is a problem with the system.

Speed/Distance Units
Enables you to show another unit on the driver information interface, head-up display*, and audio/information screen*, and set the displayed measurements to read in either miles and mph or km and km/h. Press and hold the right selector wheel when you select the No Content/Unit Change screen on the driver information interface. Each time you do this, the unit will change from miles and mph to km and km/h or vice versa. After this, a confirmation screen will appear for a few seconds.

Brightness
Press the right selector wheel when the Brightness screen is displayed. When the power mode is in ON, you can use the right selector wheel to adjust the instrument panel brightness.

Brighten: Roll the right selector wheel up.
Dim: Roll the right selector wheel down. Press the right selector wheel to exit.

Brightness
The brightness of the gauge is automatically adjusted depending on the ambient brightness.

• The brightness dims when the ambient light is dark.
• The brightness brightens when the ambient light is bright.

You can change the setting even when the ambient lighting is bright, but the brightness of the gauge won’t change.

Gauge Display Settings
Arrange content on the right side area You can choose which content to display on the right side area.

1. Press the right selector wheel when you select the Gauge display settings on the driver information interface.
2. Roll the right selector wheel to scroll to select Hide/show, then press the right selector wheel.
3. Roll the right selector wheel to scroll between contents, then press the right selector wheel to check or uncheck them.

How to customize
Roll the right selector wheel to scroll to select screen while the power mode is in ON, the vehicle is at a complete stop, and the shift position is in (P. Then, press the right selector wheel.

Example of customization settings
The steps for changing the “Trip A” reset timing setting to When fully refuelled are shown below. The default setting for “Trip A” reset timing is Manually reset.

1. Roll the right selector wheel to select Vehicle settings, then press the right selector wheel.
2. Roll the right selector wheel until the Meter setup appears on the display.
3. Press the right selector wheel.
4. Roll the right selector wheel until “Trip A” reset timing appears on the display, then press the right selector wheel.
   • The display switches to the customization setup screen, where you can select When fully refuelled, IGN OFF, Manually reset, or Back.
5. Roll the right selector wheel and select When fully refuelled, then press the right selector wheel.
   • The Selected appears, and then the display returns to the customization menu screen.
6. Press the right selector wheel after Back appears on the display.
7. Repeat Step 6 until you return to the normal screen.

Head-Up Display*
Shows the current mode for ACC with Low-Speed Follow*, LKAS, and Traffic Jam Assist*; compass or turn-by-turn directions; and vehicle speed. You can choose which item to be displayed using the driver information interface. They are displayed when the power mode is in ON.

The display also shows the following messages.

• Lane Departure Warning: When your vehicle is too close to the traffic lane lines, the lane departure warning appears.
• Head-up Warning Lights:
  Flash when the BRAKE message appears on the driver information interface.
• Traffic Sign Recognition System: Shows certain detected traffic signs while driving. If a speed limit warning is activated, the sign icon blinks when the maximum speed of the traffic sign detected is exceeded by a threshold, when compared with the vehicle speed.

To change head-up display content

1. Roll the right selector wheel to scroll to select HUD content, then press the right selector wheel.
2. Roll the right selector wheel to scroll to select the desired item, then press the right selector wheel.
   • Speedometer
     2 Speedometer P. 147
   • Navigation
     2 Navigation P. 147
   • Driver assist
     2 Current Mode for ACC with Low-Speed Follow*, LKAS, and Traffic Jam

Adjusting the head-up display brightness
Roll the right selector wheel to scroll to select HUD brightness, then press the right selector wheel.

Brighten: Roll the right selector wheel up.
Dim: Roll the right selector wheel down. Press the right selector wheel to exit.

Adjusting the head-up display height
Roll the right selector wheel to scroll to select HUD height, then press the right selector wheel.

Raise the head-up display: Roll the right selector wheel up.
Lower the head-up display: Roll the right selector wheel down.
Press the right selector wheel to exit.

1Adjusting the head-up display height
When you unlock and open the driver’s door with a remote transmitter or keyless access system, the head-up display adjusts automatically to one of the two preset positions.

Built-in Key
The built-in key can be used to unlock the doors when the keyless remote battery becomes weak and the power door unlock operation is disabled. To remove the built-in key, push the release button and then pull out the key. To reinstall the built-in key, push the built-in key into the keyless remote until it clicks.

Key Number Tag
Contains a number that you will need if you purchase a replacement key.

Key Number Tag
Keep the key number tag separate from the key in a safe place outside of your vehicle. If you wish to purchase an additional key, contact a dealer. If you lose your key and you cannot start the engine, contact a dealer.

Low Keyless Remote Signal Strength
The vehicle transmits radio waves to locate the keyless remote to start the engine and lock and unlock all the doors, hatch, and fuel fill doors. In the following cases, starting the engine and locking/unlocking the doors, hatch, and fuel fill door may be inhibited or operation may be unstable:

• Strong radio waves are being transmitted by nearby equipment.
• You are carrying the keyless remote together with telecommunications equipment, laptop computers, cell phones, or wireless devices.
• A metallic object is touching or covering the keyless remote.

Low Keyless Remote Signal Strength
Communication between the keyless remote and the vehicle consumes the keyless remote’s battery. Battery life is about two years, but this varies depending on regularity of use. The battery is consumed whenever the keyless remote is receiving strong radio waves. Avoid placing it near electrical appliances such as televisions and personal computers.

FAQs

Useful Link

Download link: https://owners.acura.com/vehicles/warranty

ACURA MDX 2018 User Manual

2024 Acura INTEGRA Specs, Price, Features, Mileage (Brochure)