Dashboard Indicators: 2020 ACURA TLX Warning Lights Guide

Table of Contents

Dashboard Indicators: 2020 ACURA TLX Warning Lights Guide

The 2020 Acura TLX is a shining example of cutting-edge design and innovation in the rapidly advancing field of automotive technology, expertly combining performance and luxury. The dashboard of this elegant and sophisticated car transforms into a dynamic interface when drivers take to the wheel, complete with a plethora of illuminated symbols and alerts. These dashboard warning lights provide the driver with critical information by acting as the watchful custodians of the vehicle’s condition and functionality. In-depth explanations of each symbol’s meaning are provided in this extensive guide, which delves into the complex pattern of the 2020 Acura TLX’s dashboard warning lights. This will enable drivers to confidently navigate the roads and maintain a safe and thrilling driving experience. Take a trip through the bright dashboard of the 2020 Acura TLX with us, as each light narrates a tale of safety, functionality, and the tasteful marriage of technology and driving pleasure.

2023 Acura Integra Specs, Price, Features, Mileage and Review

Instrument Panel

Indicators

Brake System Indicator (Red)

Comes on for a few seconds when you set the power mode to ON, then goes off.
Comes on when the brake fluid level is low.
Comes on if there is a problem with the brake system.

Comes on while driving – Check the brake fluid level.

What to do when the indicator

Comes on along with the ABS indicator
Have your vehicle checked by a dealer.

If the Brake System Indicator (Red)

Brake System Indicator (Amber)

Comes on for a few seconds when you set the power mode to ON, then goes off
Comes on if there is a problem with a system related to braking other than the conventional brake system.
Comes on if there is a problem with the automatic brake hold system.

Comes on while driving – Have your vehicle checked by a dealer
With this indicator on, your vehicle still has normal braking ability.

Indicator	Name	On/Blinking	Explanation	Message
	Electric Parking Brake Indicator	Comes on for a few seconds when you set the power mode to ON, then goes off. Comes on when the parking brake is applied and goes off when it is released Comes on when you try to drive with the parking brake applied. Comes on for about 15 seconds then goes off when you pull the electric parking brake switch with the power mode in OFF. Comes on for about 15 seconds then goes off when you set the power mode to OFF with the parking brake applied.	Blinks and the electric parking brake system indicator comes on at the same time There is a problem with the electric parking brake system. The parking brake may not be set. Release the Parking Brake manually or automatically.
	Electric Parking Brake Indicator	Comes on when you push the electric parking brake switch without depressing the brake pedal.	Depress the brake pedal to release the parking brake.
	Electric Parking Brake System Indicator	Comes on for a few seconds when you set the power mode to ON, then goes off. Comes on if there is a problem with the electric parking brake system.	Comes on while driving – Avoid using the parking brake and have your vehicle checked by a dealer immediately. If the Electric Parking Brake System Indicator

Indicator	Name	On/Blinking	Explanation	Message
	Automatic Brake Hold System Indicator	Comes on for a few seconds when you set the power mode to ON, then goes off. Comes on when the automatic brake hold system is on.	Automatic BrakeHold
	Automatic Brake Hold Indicator	Comes on for a few seconds when you set the power mode to ON, then goes off. Comes on when the automatic brake hold is activated.	Automatic Brake Hold	—
	Low Oil Pressure Indicator	Comes on when you set the power mode to ON and goes off when the engine starts. Comes on when the engine oil pressure is low.	Comes on while driving Immediately stop in a safe place. If the Low Oil Pressure Indicator

Indicator	Name	On/Blinking	Explanation	Message
	Malfunction Indicator Lamp	Comes on when you set the power mode to ON and goes off either when the engine starts or after several seconds if the engine does not start. If “readiness codes” have not been set, it blinks five times before it goes off. Comes on if there is a problem with the emissions control system. Blinks when a misfire in the engine’s cylinders is detected.	Readiness codes are part of the onboard diagnostics for the emissions control systems. Testing of Readiness Codes Comes on while driving – Have your vehicle checked by a dealer Blinks while driving – Stop in a safe place where there are no flammable objects. Stop the engine for 10 minutes or more, and wait for it to cool down. Then, take the vehicle to a dealer. If the Malfunction Indicator Lamp
	Charging System Indicator	Comes on when you set the power mode to ON and goes off when the engine starts. Comes on when the battery is not charging.	Comes on while driving – Turn off the climate control system and rear defogger reduce electricity consumption. If the Charging System Indicator
	Gear Position Indicator/Shift Lever Position Indicator	Indicates the current gear selection.	Shifting	—

Models with electronic gear selector

Indicator	Name	On/Blinking	Explanation	Message
	Transmission System Indicator	The indicated current gear selection blinks if there is a problem with the transmission system.	Avoid sudden start and acceleration, and stop in a safe place immediately. Have your vehicle checked by a dealer.
		All the gear positions may light for several seconds, and go off.	When all the gear positions light, immediately stop your vehicle in a safe place. Indicators go off if there is no problem. However, even if they go off, take your vehicle to a dealer for inspection.
		The indicated current gear selection or all the gear positions blink if there is a problem with the transmission system, and the vehicle no longer moves.	Immediately stop in a safe place. Have your vehicle checked by a dealer.
		The indicated current gear selection or all the gear positions blink if you cannot select (P due to the transmission system failure.	The engine can be activated as a temporary measure. If the Transmission System Indicator Blinks along with the Warning Set the parking brake when parking. Have your vehicle checked by a dealer immediately.

Models with shift lever

Indicator	Name	On/Blinking	Explanation	Message
	Transmission System Indicator	Blinks if the transmission system has a problem.	Blinks while driving – Avoid sudden starts and acceleration and have your vehicle checked by a dealer immediately.

Indicator	Name	On/Blinking	Explanation	Message
	M (sequential mode) Indicator/ Sequential Mode Gear Selection Indicator	Comes on when the manual sequential mode is applied.	Sequential Shift Mode Operation	—
	Seat Belt Reminder Indicator	Comes on and the beeper sounds if you are not wearing a seat belt when you set the power mode to ON If the front passenger is not wearing a seat belt, the indicator comes on about a few seconds later. Blinks while driving if either you and/ or the front passenger has not fastened a seat belt. The beeper sounds and the indicator blinks at regular intervals.	The beeper stops and the indicator goes off when you and the front passenger fasten their seat belts. Stays on after you and/or the front passenger has fastened the seat belt(s) A detection error may have occurred in the sensor. Have your vehicle checked by a dealer. Seat Belt Reminder
	Low Fuel Indicator	Comes on when the fuel reserve is running low (approximately 2.6 U.S. gal/9.7 Liter left on 2WD models, and 2.2 U.S. gal/8.2 Liter left on AWD models). Blinks if there is a problem with the fuel gauge.	Comes on – Refuel your vehicle as soon as possible. Blinks – Have your vehicle checked by a dealer.

Indicator	Name	On/Blinking	Explanation	Message
	Anti-lock Brake System (ABS) Indicator	Comes on for a few seconds when you set the power mode to ON, then goes off. If it comes on at any other time, there is a problem with the ABS.	Stays on constantly – Have your vehicle checked by a dealer. With this indicator on, your vehicle still has normal braking ability but no anti-lock function. Anti-lock Brake System (ABS)
	Supplemental Restraint System Indicator	Comes on for a few seconds when you set the power mode to ON, then goes off. Comes on if a problem with any of the following is detected: Supplemental restraint system Side airbag system Side curtain airbag system Seat belt tensioners	Stays on constantly or does not come on at all – Have your vehicle checked by a dealer.
	Electric Power Steering (EPS) System Indicator	Comes on when you set the power mode to ON and goes off when the engine starts. Comes on if there is a problem with the EPS system.	Stays on constantly or does not come on at all – Have your vehicle checked by a dealer. If the Electric Power Steering (EPS) System Indicator Comes

Indicator	Name	On/Blinking	Explanation	Message
	Vehicle Stability Assist (VSA®) System Indicator	Comes on for a few seconds when you set the power mode to ON, then goes off. Blinks when VSA® is active. Comes on if there is a problem with the VSA® system, brake assist system or hill start assist system.	Stays on constantly – Have your vehicle checked by a dealer. Vehicle Stability Assist® (VSA®), aka Electronic Stability Control (ESC), Hill Start Assist System
	Vehicle Stability Assist (VSA®) OFF Indicator	Comes on for a few seconds when you set the power mode to ON, then goes off. Comes on when you partially disable VSA®.	VSA® On and Off	—

Indicator	Name	On/Blinking	Explanation	Message
	Low Tire Pressure/ TPMS Indicator	Comes on for a few seconds when you set the power mode to ON, then goes off. Comes on if the tire pressure of any of the tires becomes significantly low. Blinks for about one minute, and then stays on if there is a problem with the TPMS, or when a spare tire* is temporarily installed.	Comes on while driving – Stop in a safe place, check tire pressures, and inflate the tire(s) if necessary. Blinks and remains on – Have your vehicle checked by a dealer. If the vehicle is fitted with a spare tire*, get your regular tire repaired or replaced and put it back on your vehicle as soon as you can.
	System Message Indicator	Comes on for a few seconds when you set the power mode to ON, then goes off. Comes on along with a beep when a problem is detected. A system message on the multi-information display appears at the same time.	While the indicator is on, roll the right selector wheel to see the message again. Refer to the Indicators information in this chapter when a system message appears on the multi-information display. Take the appropriate action for the message. The multi-information display does not return to the normal screen unless the warning is canceled, or the right selector wheel is rolled.	—

Indicator	Name	On/Blinking	Explanation	Message
	Turn Signal and Hazard Warning Indicators	Blinks when you operate the turn signal lever. Blink along with all turn signals when you press the hazard warning button.	Does not blink or blink rapidly Replacing Light Bulbs	—
	High Beam Indicator	Comes on when the high-beam headlights are on.	—	—
	Lights On Indicator	Comes on when the light switch is in a position other than OFF or when the switch is set to AUTO and the exterior lights come on.	If you set the power mode to ACCESSORY or VEHICLE OFF (LOCK) while the exterior lights are on, a chime sounds when the driver’s door is opened.	—
	Fog Light Indicator*	Comes on when the fog lights are on.	—	—
	Auto High-Beam Indicator	Comes on when all the operating conditions of the Auto high-beam are met.	Auto High-Beam	—

Indicator	Name	On/Blinking	Explanation	*Message1**
	Immobilizer System Indicator	Comes on briefly when you set the power mode to ON, then goes off Comes on if the immobilizer system cannot recognize the key information.	Blinks – You cannot start the engine. Set the power mode to VEHICLE OFF (LOCK), then select the ON mode again. Repeatedly blinks – The system may be malfunctioning. Have your vehicle checked by a dealer. Do not attempt to alter this system or add other devices to it. Electrical problems can occur.	—
Indicator	Security System Alarm Indicator	Blinks when the security system alarm has been set.	Security System Alarm	—
	Keyless Access System Indicator	Comes on for a few seconds when you set the power mode to ON, then goes off. Comes on as soon as a problem is detected in the keyless access system or keyless starting system.	Stays on constantly or does not come on at all – Have your vehicle checked by a dealer.

Indicator	Name	On/Blinking	Explanation	Message
	Road Departure Mitigation (RDM) Indicator	Comes on for a few seconds when you change the power mode to ON, then goes off. Comes on if there is a problem with the RDM system.	Stays on constantly – Have your vehicle checked by a dealer.
		Comes on when the RDM system shuts itself off.	Stays on – The temperature inside the camera is too high. Use the climate control system to cool down the camera. The system activates when the temperature inside the camera cools down. Front Sensor Camera
		Comes on when the RDM system shuts itself off.	Stays on – The area around the camera is blocked by dirt, mud, etc. Stop your vehicle in a safe place, and wipe it off with a soft cloth. Have your vehicle checked by a dealer if the indicator and message come back on after you cleaned the area around the camera. Front Sensor Camera

Indicator	Name	On/Blinking	Explanation	Message
	Precision All-Wheel SteerTM(P-AWS®) System Indicator*	Comes on for a few seconds when you set the power mode to ON, then goes off. If it comes on at any other time, there is a problem with the Precision All-Wheel SteerTM (P-AWS®) system.	Comes on while driving – Have your vehicle checked by a dealer. The system may limit the vehicle speed to 50 mph (80 km/h) or less.
	SPORT (Sport mode) Indicator	Comes on for a few seconds when you set the power mode to ON, then goes off. Comes on when you press the Dynamic Mode button if the Sport or Sport+ mode is selected.	Integrated Dynamics System
	ECON (Econ mode) Indicator	Comes on for a few seconds when you set the power mode to ON. Comes on when you press the Dynamic Mode button if the Econ mode is selected.	Integrated Dynamics System
	Adaptive Cruise Control (ACC) with Low Speed Follow Indicator (Amber)	Comes on for a few seconds when you set the power mode to ON, then goes off. Comes on if there is a problem with ACC with Low-Speed Follow.	Comes on while driving – Have your vehicle checked by a dealer.

Indicator	Name	On/Blinking	Explanation	Message
	Adaptive Cruise Control (ACC) with Low Speed Follow Indicator (Green)	Comes on when you press the MAIN button.	Adaptive Cruise Control (ACC)	—
		Comes on if anything covers the radar sensor cover and prevents the sensor from detecting a vehicle in front. May come on when driving in bad weather (rain, snow, fog, etc.) ACC with Low-Speed Follow has been automatically canceled.	When the radar sensor gets dirty, stop your vehicle in a safe place, and wipe off dirt using a soft cloth. Have your vehicle checked by a dealer if the message does not disappear even after you clean the sensor cover.
		Comes on when ACC with Low-Speed Follow is in operation, but the temperature inside the front sensor camera is too high. ACC with Low-Speed Follow cancels automatically. The beeper sounds simultaneously.	Use the climate control system to cool down the camera. Goes off – The camera has been cooled down and the system activates normally.
		Comes on when the area around the camera is blocked by dirt, mud, etc. Stop your vehicle in a safe place, and wipe it off with a soft cloth. May come on when driving in bad weather (rain, snow, fog, etc.)	Have your vehicle checked by a dealer if the indicator and message come back on after you cleaned the area around the camera.

Indicator	Name	On/Blinking	Explanation	Message
	Lane Keeping Assist System (LKAS) Indicator (Amber)	Comes on for a few seconds when you set the power mode to ON, then goes off. Comes on if there is a problem with the LKAS.	Stays on constantly – Have your vehicle checked by a dealer.
	Lane Keeping Assist System (LKAS) Indicator (Green)	Comes on when you press the MAIN button.	Lane Keeping Assist System (LKAS)	—
		Comes on when the LKAS is in operation, or the LKAS button is pressed, but the temperature inside the front sensor camera is too high. The LKAS cancels automatically. The beeper sounds simultaneously.	Use the climate control system to cool down the camera. Goes off – The camera has been cooled down and the system activates normally. Front Sensor Camera
		Comes on when the area around the camera is blocked by dirt, mud, etc. Stop your vehicle in a safe place, and wipe it off with a soft cloth. May come on when driving in bad weather (rain, snow, fog, etc.)	Have your vehicle checked by a dealer if the indicator and message come back on after you cleaned the area around the camera.

Indicator	Name	On/Blinking	Explanation	Message
	Blind spot information System Indicator*	Comes on for a few seconds when you change the power mode to ON, then goes off. Stays on while blind- the spot information system is turned off.	Customized Features
		Comes on when mud, snow, or ice accumulates in the vicinity of the sensor.	Comes on while driving – Remove the obstacle in the vicinity of the sensor. Blind-spot information System*
		Comes on if there is a problem with the system.	Comes on while driving – Have your vehicle checked by a dealer.
	Super Handling All-WheelDriveTM (SH-AWD®) Indicator*	Comes on for a few seconds when you set the power mode to ON, then goes off. Comes on if there is a problem with the SH-AWD® system Blinks when the differential temperature is too high.	Stays on constantly – The engine drives the front wheels only in this state. Have your vehicle checked by a dealer.
	Super Handling All-WheelDriveTM (SH-AWD®) Indicator*		Blinks while driving – Stop in a safe place, put the transmission into (P, and idle the engine until the indicator goes off. If the indicator does not stop blinking, take your vehicle to a dealer. Super Handling-All Wheel DriveTM (SH- AWD®)

Indicator	Name	On/Blinking	Explanation	Message
	Auto Idle Stop Indicator (Green)*	Comes on when Auto Idle Stop is in operation. The engine automatically shuts off.	Auto Idle Stop*	—
	Auto Idle Stop System Indicator (Amber)*	Comes on for a few seconds when you set the power mode to ON, then goes off.	—	—
		Comes on when the Auto-Idle Stop System has been turned off by the Auto-Idle- Stop OFF Button.	Auto Idle Stop System ON/OFF
		Blinks if there is a problem with the Auto Idle Stop System.	Blinks – Have your vehicle checked by a dealer.

Indicator	Name	On/Blinking	Explanation	Message
	Collision Mitigation Braking SystemTM (CMBSTM)Indicator	Comes on for a few seconds when you change the power mode to ON, then goes off. Comes on when you deactivate the CMBSTM. A multi-information display message appears for five seconds. Comes on if there is a problem with the CMBSTM.	Stays on constantly without the CMBSTM off – Have your vehicle checked by a dealer. Collision Mitigation Braking SystemTM (CMBSTM)

Indicator	Name	On/Blinking	Explanation	Message
	Collision Mitigation Braking SystemTM (CMBSTM)Indicator	Comes on when the CMBSTM system shuts itself off.	Stays on – The area around the camera is blocked by dirt, mud, etc. Stop your vehicle in a safe place, and wipe it off with a soft cloth. Front Sensor Camera
			When the radar sensor gets dirty, stop your vehicle in a safe place, and wipe off dirt using a soft cloth. Have your vehicle checked by a dealer if the message does not disappear even after you clean the sensor cover. Collision Mitigation Braking SystemTM
			Stays on – The temperature inside the camera is too high. Use the climate control system to cool down the camera. The system activates when the temperature inside the camera cools down. Front Sensor Camera

FAQs

What does it mean if the “2020 ACURA TLX” dashboard warning light resembling an exclamation mark inside a triangle illuminates?

This symbol usually denotes a problem with the braking system of the car. The brake system needs to be inspected as soon as possible

Why does the “2020 ACURA TLX” dashboard display a wrench icon?

The wrench icon indicates that regular maintenance is due for the vehicle. This is a friendly reminder to book a service appointment so that performance is at its best.

What should I do if the “2020 ACURA TLX” dashboard shows a temperature warning light?

The engine may be overheating based on this warning Once you’ve stopped, switch off the engine and allow it to cool down.

Why is the “2020 ACURA TLX” dashboard showing a light resembling a steering wheel with an exclamation mark?

This symbol suggests that there might be a problem with the electric power steering setup. To make sure it functions properly, it must be inspected.*

What does it mean when the “2020 ACURA TLX” dashboard displays a tire pressure warning light?

This light indicates that the pressure in one or more tires is low. To maintain ideal driving conditions, check and adjust the tire pressure as necessary.

How can I address the “2020 ACURA TLX” dashboard warning light depicting an oil can?

The oil can icon indicates low engine oil levels.

Why is the “2020 ACURA TLX” dashboard showing a light resembling a key inside a car?

This denotes an issue with the car’s anti-theft mechanism. Try restarting the engine and make sure you are using the right key.

What should I do if the “2020 ACURA TLX” dashboard displays a light resembling a battery?

A problem with the charging system may be indicated by the battery warning light.

Why does the “2020 ACURA TLX” dashboard have a light resembling an open door?

This icon indicates that one or more doors are not completely shut. Make sure all doors are shut securely by checking them.

What does it mean when the “2020 ACURA TLX” dashboard shows a light resembling an engine?

The engine warning light denotes a problem with the car’s engine or emissions control system.

How do I interpret the “2020 ACURA TLX” dashboard warning light resembling a person with a seatbelt?

This symbol serves as a reminder to passengers to buckle up. Before you drive, make sure every passenger is securely fastened.

Why does the “2020 ACURA TLX” dashboard display a light resembling a snowflake or thermometer?

This alert indicates that it is almost freezing outside, which could result in icy driving conditions. Drive carefully at all times.

What should I do if the “2020 ACURA TLX” dashboard shows a light resembling a gas pump?

The gas pump icon denotes low fuel levels.

What does the red exclamation point symbolize on the dashboard of a 2020 Acura TLX?

The red exclamation point typically indicates a critical issue such as low brake fluid or brake system malfunction. Similarly, in a 2010 Cadillac STS, the red exclamation point signifies brake system problems.

Why is the “2020 ACURA TLX” dashboard displaying a light resembling a windshield with wipers?

This symbol serves as a reminder to check the amount of windshield washer fluid in your vehicle and refill it as needed to maintain clear visibility.

Useful Links

View Full PDF: ACURA TLX 2020 User Manual| Auto User Guide

2023 Acura Integra Specs, Price, Features, Mileage and Review 2020 ACURA TLX Display Setting | How to use the display screen

Category

About Us

Privacy Policy

Contact Us