Dashboard Symbols: 2022 ACURA TLX Warning Indicators Guide
It can be hard to find your way around modern cars, especially when you have to figure out the confusing array of dashboard icons and warning lights that light up our way. The 2022 Acura TLX stands out among all of these icons because it is a great example of both technology progress and driver safety. It has a lot of alert systems that are meant to keep drivers informed and their trips safe. Each symbol, from the soft glow of a check engine light to the urgent flash of a low tyre pressure warning, is an important way for the car and driver to talk to each other and share important information about the car’s state and performance.
2023 – 2024 Acura TLX Review, Price, Features and Mileage (Brochure)
Indicators
Indicators come on/blink depending on the condition of the vehicle. Messages may be displayed on the Multi-Information Display at the same time. Please take the appropriate action outlined in the message, such as contacting a dealer.
1: When you set the power mode to ON, these indicators come on to indicate that system checks are being performed. They go off a few seconds later or after the engine has started. If an indicator does not come on or turn off, there may be a malfunction in the corresponding system. To resolve the issue, follow the instructions in the owner’s manual.
Not available on all models
| Indicator |
Name |
On/Blinking |
Explanation |
 |
Parking Brake and Brake System Indicator (Red)
|
- Comes on when the parking brake is applied and goes off when it is released.
|
- The beeper sounds and the indicator comes on if you drive with the parking brake applied.
- Comes on for about 30 seconds when you apply the electric parking brake while the power mode is in ACCESSORY or VEHICLE OFF, then goes off.
- Stays on for about 30 seconds when you set the power mode to VEHICLE OFF while the electric parking brake is applied, and then goes off.
|
- Comes on when the brake fluid level is low.
|
- Comes on while driving – Make sure the parking brake is released. Stop in a safe place and check the brake fluid level.
|
| Indicator |
Name |
On/Blinking |
Explanation |
 |
Parking Brake and Brake System Indicator (Red)
|
- Comes on if there is a problem with the brake system.
|
- Comes on along with the Parking Brake and Brake System Indicator (amber) – Immediately stop in a safe place. Contact a dealer for repair. The brake pedal becomes harder to operate. Depress the pedal further than you normally do.
- It comes on along with the ABS indicator – Have your vehicle checked by a dealer.
- Blinks and the Parking Brake and Brake System
- Indicator (amber) comes on simultaneously – There is a problem with the electric parking brake system. The parking brake may not be set.
- Avoid using the parking brake and have your vehicle checked by a dealer immediately.
|
| Indicator |
Name |
On/Blinking |
Explanation |
 |
Parking Brake and Brake System Indicator (Amber)
|
- Comes on if there is a problem with a system related to braking other than the conventional brake system.
|
- Comes on while driving – Avoid high speeds and sudden braking. Take the vehicle to a dealer immediately.
|
- Comes on if there is a problem with the electric parking brake system and/or the automatic brake hold system.
|
- Stays on constantly – Avoid using the parking brake and have your vehicle checked by a dealer immediately.
|
- Comes on if there is a problem with the radar sensor.
- Indicators may come on temporarily when the Maximum Load Limit is exceeded.
|
- Make sure the total load is within the Maximum Load Limit.
- Stays on constantly – Have your vehicle checked by a dealer.
|
 |
Automatic Brake Hold System Indicator
|
- Comes on when the automatic brake hold system is on.
|
|
|
|
Automatic Brake Hold Indicator |
- Comes on when the automatic brake hold is activated.
|
|
| Indicator |
Name |
On/Blinking |
Explanation |
 |
Malfunction Indicator Lamp
|
- After you have set the power mode to ON, the vehicle performs system checks. However, if the readiness codes have not been set by that time, this indicator will blink five times and then go off.
|
- Readiness codes are part of the onboard diagnostics for the emissions control systems.
|
- Comes on if there is a problem with the emissions control systems.
- Blinks when a misfire in the engine’s cylinders is detected.
|
|
 |
Charging System Indicator
|
- Comes on when there is a problem with the charging system.
|
- Stop in a safe place and contact a dealer immediately.
|
 |
Shift Position Indicator
|
- Indicates the current gear selection.
|
|
 |
M (sequential mode) Indicator/ Gear Selection Indicator |
- Comes on when the sequential mode is applied.
|
|
| Indicator |
Name |
On/Blinking |
Explanation |
 |
Transmission System Indicator |
- The current gear selection blinks if the transmission system has a problem.
|
- Blinks while driving – Performance may be reduced. Avoid sudden starts and acceleration and have your vehicle checked by a dealer immediately.
|
- The indicated current gear selection blinks if you cannot put the transmission into (R due to a transmission system failure.
- The indicated current gear selection blinks if the transmission system has a problem and the performance of the vehicle is reduced.
|
- Avoid sudden starts, sudden acceleration and high speed, and have your vehicle checked by a dealer immediately.
|
- The indicated current gear selection blinks if the transmission system has a problem and the paddle shifters cannot be used.
|
- Have your vehicle checked by a dealer immediately.
|
- The current gear position or all the gear positions blink if there is a problem with the transmission and the vehicle is no longer able to run.
|
- Immediately park your car in a safe place.
- Have your vehicle checked by a dealer.
|
- The current gear position or all the gear positions blink if there is a problem with the transmission and it is not possible to select (P.
|
- Depending on the circumstances, you can set the power mode to ON as an emergency measure.
- While the vehicle is stopped, apply the parking brake.
- Have your vehicle checked by a dealer immediately.
|
| Indicator |
Name |
On/Blinking |
Explanation |
 |
Auto Idle Stop Indicator (Green)
|
- Comes on when Auto Idle Stop is in operation. The engine automatically shuts off.
|
|
 |
Auto Idle Stop
OFF Indicator
|
- Comes on when the Auto Idle Stop system has been turned off by the Auto Idle Stop system OFF button.
|
|
 |
Auto Idle Stop System Indicator (Amber)
|
- Blinks if there is a problem with the Auto Idle Stop system.
|
- Blinks – Have your vehicle checked by a dealer.
|
| Indicator |
Name |
On/Blinking |
Explanation |
 |
Auto Idle Stop Suspend Indicator
|
- Comes on while Auto Idle Stop is temporarily suspended in the following situations.
|
— |
| – The brake pedal is not fully pressed |
- Depress the brake pedal firmly.
|
- The transmission is in a position other than
(D
|
|
- System charging is prioritized
|
- The climate control system is prioritized
|
- Engine coolant temperature is not in the operating range
|
- The Integrated Dynamics System mode is in SPORT, SPORT+* or INDIVIDUAL mode (when the Auto Idle Stop setting is set to Disable).
|
|
- The battery temperature is too low.
- Auto Idle Stop does not activate for some reason.
|
|
| — |
- If you press and hold the Auto Idle Stop OFF button, you can select whether to display the status messages or not.
|
| Indicator |
Name |
On/Blinking |
Explanation |
 |
Seat Belt Reminder Indicator
|
- Blinks and the beeper sounds for a few seconds if you are not wearing a seat belt when you set the power mode to ON, and then the indicator comes on.
- If the front passenger is not wearing a seat belt, the indicator comes on a few seconds later.
- Blinks while driving if you and/or the front passenger have not fastened a seat belt. The beeper sounds and the indicator blinks at regular intervals.
|
- The beeper stops and the indicator goes off when you and the front passenger fasten their seat belts.
- Stays on after you and/or the front passenger have fastened the seat belt(s) – A detection error may have occurred in the sensor. Have your vehicle checked by a dealer.
|
 |
Low Fuel Indicator (Amber)
|
- Comes on when the fuel reserve is running low (approximately 2.38 U.S. gal./9.0 Liter left).
|
- Comes on – Refuel your vehicle as soon as possible.
|
- Blinks if there is a problem with the fuel gauge.
|
- Blinks – Have your vehicle checked by a dealer.
|
| Indicator |
Name |
On/Blinking |
Explanation |
 |
Anti-lock Brake System (ABS) Indicator
|
- Comes on if there is a problem with the ABS.
|
- Stays on constantly – Have your vehicle checked by a dealer. With this indicator on, your vehicle still has normal braking ability but no anti-lock function.
|
 |
Supplemental Restraint System Indicator
|
- Comes on if a problem with any of the following is detected:
- Supplemental restraint system
- Side airbag system
- Side curtain airbag system
- Seat belt tensioner
|
- Stays on constantly – Have your vehicle checked by a dealer.
|
 |
Electric Power Steering (EPS) System Indicator
|
- Comes on if there is a problem with the EPS system.
|
- Stays on constantly – Have your vehicle checked by a dealer.
|
| Indicator |
Name |
On/Blinking |
Explanation |
|
Vehicle Stability AssistTM (VSA®) System Indicator
|
- Blinks when VSA® is active.
|
— |
- Comes on if there is a problem with the brake assist system, VSA® system or hill start assist system.
|
- Stays on constantly – Have your vehicle checked by a dealer.
|
- Comes on if the VSA® system is deactivated temporarily after the battery has been disconnected, and then re-connected.
|
- Drive a short distance at more than 12 mph (20 km/h). The indicator should go off. If it does not, have your vehicle checked by a dealer.
|
 |
Vehicle Stability AssistTM (VSA®) OFF Indicator
|
- Comes on when you partially disable VSA®.
|
|
- Comes on if the VSA® system is deactivated temporarily after the battery has been disconnected, and then re-connected.
|
- Drive a short distance at more than 12 mph (20 km/h). The indicator should go off. If it does not, have your vehicle checked by a dealer.
|
 |
Low Tire Pressure/ TPMS Indicator
|
- Comes on if the tyre pressure of any of the tyres becomes low.
|
- Comes on while driving – Stop in a safe place, check tyre pressures, and inflate the tyre (s) if necessary.
|
- Blinks for about one minute, and then stays on if there is a problem with the TPMS with Tire Fill Assist, or when a compact spare tire is temporarily installed.
|
- Blinks and remains on – Have your vehicle checked by a dealer. If the vehicle is fitted with a compact spare tyre, get your regular tyre repaired or replaced and put it back on your vehicle as soon as you can.
|
| Indicator |
Name |
On/Blinking |
Explanation |
 |
Turn Signal and Hazard Warning Indicators
|
- Blinks when you operate the turn signal lever.
- Blink along with all turn signals when you press the hazard warning button.
|
- Do not blink or blink rapidly – Have your vehicle checked by a dealer.
|
 |
High Beam Indicator
|
- Comes on when the high-beam headlights are on.
|
— |
 |
Lights On Indicator
|
- comes on when the parking, tail, and other external lights are on.
|
|
 |
Fog Light Indicator*
|
- Comes on when the fog lights are on.
|
|
|
|
Auto High-Beam Indicator
|
- Comes on when all the operating conditions of the auto high-beam are met.
|
|
| Indicator |
Name |
On/Blinking |
Explanation |
Indicator
|
Immobilizer System Indicator
|
- Blinks if the immobilizer system cannot recognize the key information.
|
- Blinks – You cannot start the engine. Set the power mode to VEHICLE OFF, then select the ON mode again. Canadian models
Depress and hold the brake pedal before setting the power mode to ON.
- Repeatedly blinks – The system may be malfunctioning. Have your vehicle checked by a dealer.
- Do not attempt to alter this system or add other devices to it. Electrical problems can occur.
|
Indicator
|
Security System Alarm Indicator
|
- Blinks when the security system alarm has been set.
|
|
| Indicator |
Name |
On/Blinking |
Explanation |
|
System Message Indicator
|
- Comes on along with a beep when a problem is detected. A system message on the multi-information display appears at the same time.
|
- While the indicator is on, roll the right selector wheel to see the message again.
- Refer to the Indicator information in this chapter when a system message appears on the multi-information display. Take the appropriate action for the message.
- The multi-information display does not return to the normal screen unless the warning is cancelled or the right selector wheel is pressed.
|
 |
Super Handling- All-Wheel DriveTM (SH-AWD®) Indicator*
|
- Comes on if there is a problem with the SH-AWD® system.
|
- Stays on constantly – The engine drives the front wheels only in this state. Have your vehicle checked by a dealer.
|
- Blinks when the differential temperature is too high.
|
- Blinks while driving – Stop in a safe place, put the transmission into (P, and idle the engine until the indicator goes off. If the indicator does not stop blinking, take your vehicle to a dealer.
|
 |
Maintenance Minder Indicator
|
- Comes on when the scheduled maintenance is due soon.
- Consequently, Maintenance Due Now and Maintenance Past Due follow.
|
|
| Indicator |
Name |
On/Blinking |
Explanation |
 |
Adaptive Cruise Control (ACC) with Low Speed Follow Indicator (Amber)
|
- Comes on if there is a problem with ACC with Low-Speed Follow.
|
- Comes on while driving – Have your vehicle checked by a dealer.
|
- Indicators may come on temporarily when the Maximum Load Limit is exceeded.
- ACC with Low-Speed Follow has been automatically cancelled.
|
- Make sure the total load is within the Maximum Load Limit.
- Stays on constantly – Have your vehicle checked by a dealer.
|
- Comes on if the ACC is deactivated temporarily after the battery has been disconnected, and then re-connected.
|
- Drive a short distance at more than 12 mph (20 km/h). The indicator should go off. If it does not, have your vehicle checked by a dealer.
|
|
Adaptive Cruise Control (ACC) with Low-Speed Follow Indicator (White/Green)
|
- Lights up in white when you press the
 button.
- Lights up in green when you press the
RES/+ button or SET/- button.
|
|
 |
Lane Keeping Assist System (LKAS) Indicator (Amber)
|
- Comes on if there is a problem with the LKAS.
|
- Stays on constantly – Have your vehicle checked by a dealer.
|
|
Lane Keeping Assist System (LKAS) Indicator (White/Green)
|
- Lights up in white when you press the LKAS button.
- Lights up in green when the LKAS is in operation.
|
|
| Indicator |
Name |
On/Blinking |
Explanation |
 |
Cruise Mode Indicator (White/ Green)
|
- Lights up in white when you change to cruise mode.
- Lights up in green when you have set a speed for cruise control.
|
|
 |
Safety Support Indicator (Amber)
|
- Comes on if there is a problem with RDM, CMBSTM, or blind spot information system*.
|
- Stays on constantly – Have your vehicle checked by a dealer.
|
- Indicators may come on temporarily when the Maximum Load Limit is exceeded.
|
- Make sure the total load is within the Maximum Load Limit.
- Stays on constantly – Have your vehicle checked by a dealer.
|
- Comes on if the RDM and CMBSTM are deactivated temporarily after the battery has been disconnected and then re-connected.
|
- Drive a short distance at more than 12 mph (20 km/h). The indicator should go off. If it does not, have your vehicle checked by a dealer.
|
| Indicator |
Name |
On/Blinking |
Explanation |
 |
Safety Support Indicator (Amber)
|
- Comes on when RDM and/or CMBSTM shuts itself off.
|
- Indicators may come on temporarily when passing through an enclosed space, such as a tunnel.
- The area around the radar sensor is blocked by dirt, mud, etc. Stop your vehicle in a safe place and wipe the debris off with a soft cloth. The indicator may take some time to go off after the radar sensor is cleaned.
- Have your vehicle checked by a dealer if the indicator does not go off even after you have cleaned the radar sensor.
|
- Stays on – The temperature inside the camera is too high. Use the climate control system to cool down the camera. The system activates when the temperature inside the camera cools down.
|
- Stays on – The area around the camera is blocked by dirt, mud, etc. Stop your vehicle in a safe place and wipe the debris off with a soft cloth.
- Have your vehicle checked by a dealer if the indicator and message are still displayed even after you have cleaned the area around the camera.
|
| Indicator |
Name |
On/Blinking |
Explanation |
|
Safety Support Indicator (Amber)
|
Models with blind spot information system
- Comes on when mud, snow, or ice has accumulated in the vicinity of the blind spot information system sensor.
- Comes on when the temperature of the blind spot information system sensor is high.
|
- Comes on while driving – Something may be interfering with the blind spot information system sensor. Check the vicinity of the blind spot information system sensor and remove any obstacles.
- The system will return to normal when the temperature cools down.
|
|
Safety Support Indicator (Green/ Gray)
|
- Lights up in green when RDM, CMBSTM, and blind spot information system* are on.
- Lights up in green and grey when RDM, CMBSTM, blind spot information system*, or any two of these systems are off.
- Lights up in grey when RDM, CMBSTM, and blind spot information system* are off.
|
|
FAQs
What does the “2022 ACURA TLX” dashboard symbol resembling a key mean? This sign means that the key has not been found. Make sure that the key fob can reach the car.
How do I interpret the “2022 ACURA TLX” symbol of an exclamation mark inside a triangle? This sign usually means that the tire pressure is too low. Check the tire pressure and make the necessary changes.
What does the “2022 ACURA TLX” symbol resembling a car with squiggly lines underneath signify? This sign means that there is a problem with the electronic stability control system.
What should I do if the “2022 ACURA TLX” dashboard symbol resembling a battery appears? This sign means that something is wrong with the charging system. Check the battery and the way it charges right away.
What does the “2022 ACURA TLX” symbol of an engine outline with the word “Check” underneath mean? This sign means there is something wrong with the engine. Slow down, and get the car checked out right away.
How should I respond to the “2022 ACURA TLX” symbol of an oil can? This sign means that the engine oil pressure is low. When it’s safe to do so, stop the car and check the oil level. If you need to, add oil or ask for help.
What does the “2022 ACURA TLX” dashboard symbol resembling a steering wheel with an exclamation mark mean? This symbol means that there is a problem with the electric power steering device. Try to stay away from fast speeds and have a professional check out the system.
How should I interpret the “2022 ACURA TLX” symbol of a person sitting with a seatbelt across? This sign tells people to buckle up in their seats. Make sure that everyone inside is properly controlled.
What does the “2022 ACURA TLX” symbol of a person sitting with an airbag deploying mean? This sign means that something is wrong with the airbag system.
How do I interpret the “2022 ACURA TLX” symbol of a thermometer inside a droplet of liquid? This sign means the engine is getting too hot. Stop in a safe place, turn off the engine, and let it cool down. Once the engine is cool, check the water level.
What does the “2022 ACURA TLX” symbol of a fuel pump mean? This symbol means the fuel amount is low. To avoid running out of fuel, refuel as soon as possible.
How should I respond to the “2022 ACURA TLX” symbol resembling an open door? This sign means that one or more doors are not closed properly. Stop the car and make sure all the doors are shut tightly.
What does the “2022 ACURA TLX” symbol of a windshield with wipers mean? This sign means that the windshield washer fluid level is low. As soon as possible, fill up the washer fluid tank again.
How should I interpret the “2022 ACURA TLX” symbol resembling a circle with dotted lines around it? If you see this sign, it means the parking brake is on. Before you drive, let go of the parking brake.
What does the “2022 ACURA TLX” symbol of a wrench mean? This symbol means a reminder to do some upkeep.
Useful Links
View Full PDF: ACURA TLX 2022 User Manual|Auto User Guide
2023 – 2024 Acura TLX Review, Price, Features and Mileage (Brochure)
2022 ACURA TLX Multi-Information Display Setting Guide
