2017 Alfa Romeo Giulia Display Instruction
The 2017 Alfa Romeo Giulia has a state-of-the-art display system that is meant to make technology and easy-to-use features blend seamlessly into the driving experience. The infotainment display, which is located in a prominent place on the dashboard, controls many of the car’s features and entertainment choices. With its easy-to-use touchscreen interface, you can quickly get to navigation, audio controls, car settings, and more. This screen not only makes the cabin look better but also makes sure that important information and entertainment are easy to find. This shows that Alfa Romeo is committed to both performance and modern ease in the Giulia.
INSTRUMENT CLUSTER DISPLAY
Instrument Cluster Display Description
This vehicle is equipped with a driver-interactive display that is located in the instrument cluster. When one or more of the doors have been opened or closed and the ignition is in the OFF position, the instrument cluster will display the vehicle mileage for a few seconds.
Reconfigurable Instrument Cluster Display
During operation, the instrument cluster display is divided into multiple sections that show driving data, warnings, and failure indications.
- Headlight Warning Lights
- Displays the headlight warning light for either of the following active modes:
- Headlights
- Automatic Headlights
- Gear Selector Information
Displays the following information controlled by the gear selector function:- P = PARK
- R = REVERSE
- N = NEUTRAL
- D = DRIVE, (automatic forward speed)
- AutoStick: + shifting to a higher gear in manual (sequential) driving mode –shifting to a lower gear in sequential driving mode
- Forward Collision, Lane Departure, Cruise Control
- Displays operations for the following modes:
- Forward Collision Warning (FCW) — If Equipped
- Lane Departure Warning (LDW) — If Equipped
- Cruise Control (CC) or Active Cruise Control (ACC) — If Equipped
- Displays operations for the following modes:
- Speed Limit Warning Light
- Shows information regarding the Speed Limiter function.
- Compass
- Reconfigurable Main Area Can display the following screens:
- Home
- Trip A
- Trip B (can be activated/deactivated through the Information and Entertainment System)
- Performance
The screens can be selected, on rotation, by pushing the MENU selection button on the windshield wiper stalk.Depending on the driving mode chosen using the Alfa DNA (Dynamic, Natural, and Advanced Efficiency, the screens can be graphically different. Navigation instructions and call information can be set and displayed in the Information and Entertainment System.
- Home
The parameters shown on the display, for the modes: Dynamic, Natural and Advanced Efficiency are:- Time
- Outside Temperature
- Current Speed (shown if the repeat modes of the Phone and Navigation functions are not active)
- Range
Trip A And B
For all driving modes (Dynamic, Natural, and Advanced Efficiency) and with the ignition device ON, the “Trip computer” can be used to display the measurements regarding the operating state of the vehicle. This function is characterized by two separate records, called “Trip A” and “Trip B” (the latter can be deactivated by the Information and Entertainment System), where the “complete missions” (journeys) are recorded in a reciprocally independent manner.
“Trip A” and “Trip B” are used to display the values relating to:
- Distance travelled
- Average fuel consumption
- Average speed
- Active trip
- Fuel consumption indicator
To reset the values, press and hold down the button on the windshield wiper stalk.
Performance
The displayed parameters differ according to the active mode. The modes which can be selected using the Alfa DNA system are:
- Natural
The screen graphically reproduces some parameters closely linked to the efficiency of the driving style, with a view to limiting consumption.
- Advanced Efficiency
Dynamic Driving Style
The three central icons on the screen indicate the effectiveness of the driving style, linked to the following parameters: acceleration, deceleration, and gear shifts, with a view to limiting consumption. The bar below the icons shows current consumption and the green line represents the optimal area. The globe lights up gradually according to lower consumption.
- Dynamic
Acceleration Gauge
The displayed parameters are related to vehicle stability, and the graphs illustrate the trend of the longitudinal/lateral accelerations (G-meter information), considering gravity acceleration as a reference unit. Lateral acceleration peaks are also indicated.
Vehicle Range
Indicates the miles left before the fuel tank is empty. Displays the position by indicating the cardinal direction.
Failure Warning Lights
Area dedicated to displaying failures, the following symbols could be displayed on rotation:
- Low criticality symbols (yellow amber)
- High criticality symbols (red)
Odometer
Indicates the total miles traveled. U.S. Federal regulations require that upon transfer of vehicle ownership, the seller certifies to the purchaser the correct mileage that the vehicle has been driven. If your odometer needs to be repaired or serviced, the repair technician should leave the odometer reading the same as it was before the repair or service. If s/he cannot do so, then the odometer must be set at zero, and a sticker must be placed in the door jamb stating what the mileage was before the repair or service. It is a good idea for you to make a record of the odometer reading before the repair/service so that you can be sure that it is properly reset, or that the door jamb sticker is accurate if the odometer must be reset at zero.
Customer Programmable Settings
Multiple settings can be programmed by the user using the Information and Entertainment System. This section describes only the basic settings:
- Units & Language
- Time&Date
- Cluster
To access the settings list in the Information and Entertainment System, proceed as follows:
- Press the MENU button to access the main menu.
- Select “Settings” from the main menu using the Rotary Knob.
Units & Language
The following settings can be modified under the “Units & Language” menu:
- Units: select US, metric, or custom. The custom option allows for individual selection of the unit measures
- Language: change the language of the system
- Restore Settings: restores the factory settings
- To access and change the setting, turn and push the Rotary Pad.
Clock & Date
The following settings can be modified under the “Clock & Date” menu:
- Sync With GPS Time: activates or deactivates the clock synchronization through the GPS. If the function is deactivated, the options Set Time and Set Date are enabled
- Set Time: set the time manually
- Time Format: set the time format to either a 12-hour and a 24-hour clock
- Set Date: set the date manually
- Restore Settings: restores the factory settings
- To access and change the setting, turn and push the Rotary Pad.
Cluster
The following settings can be modified under the “Cluster” menu:
- Warning Buzzer Volume: set the volume of the warning buzzer
- Trip B: activate or deactivate the Trip function
- Phone Repeat: activate or deactivate repeating the Phone function screens on the instrument cluster display
- Restore Settings: restores the factory settings
- To access and change the setting, turn and push the Rotary Pad.
FAQ’s
Answer: The display turns on automatically when you start the car. It may take a moment to boot up.
Answer: Yes, you can adjust the brightness of the display through the settings menu.
Answer: The display provides access to navigation, audio controls, vehicle settings, and various apps.
Answer: Tap the navigation icon on the touchscreen, and then enter your destination using the on-screen keyboard.
Answer: It allows you to control the radio, music, and other audio sources.
Answer: Yes, you can use voice commands to control various functions. Press the voice control button on the steering wheel to activate it.
Answer: Yes, you can pair your smartphone with the system to make calls and stream music wirelessly.
Answer: You can often customize the home screen by pressing and holding icons, and then moving them to your preferred location.
Answer: The driver information screen often shows essential vehicle information such as speed, fuel efficiency, and more.
Answer: Some models offer a split-screen option, allowing you to view multiple functions simultaneously.
Answer: You can access the sound and audio settings through the audio or media menu on the display.
Answer: Yes, it may support smartphone integration to mirror your phone’s apps on the display.
Answer: Many vehicles allow you to set up and save driver profiles, which include preferences for seating, mirrors, and more.
Answer: Check your owner’s manual or contact your Alfa Romeo dealership for guidance on software updates.
Answer: If you experience problems, refer to the user manual for troubleshooting or seek assistance from an authorized Alfa Romeo service center.