2019 Alfa Romeo 4C Spider Alarm System
In 2019, the Italian sports car Alfa Romeo 4C Spider had a sophisticated alarm system that showed how cutting-edge security technology can be combined with the elegance and speed of this car. This alarm system was a very important protector for the car, keeping it safe from theft and illegal entry. Using cutting-edge sensors and a strong security system, the 2019 Alfa Romeo 4C Spider’s alarm system not only picked up on strange behavior but also made it very hard for anyone who might try to harm the car to do so. It showed how much Alfa Romeo cared about making sure that this high-performance convertible was not only fun to drive but also very safe, giving drivers peace of mind that their most prized property was safe from all kinds of security risks.
VEHICLE SECURITY ALARM SYSTEM
The Vehicle Security Alarm monitors the doors and decklid for unauthorized entry. It will also activate the siren and emit a visual flash of the turn signals (front and rear) for any of the following intrusion cases.
Operation
The alarm activates in the following cases:
- Wrongful opening of one of the doors or the decklid (perimeter protection)
- Wrongful operation of the ignition switch (key turned to MAR [ON/RUN];
- Cutting of the battery leads
- Anomalous lifting/tilting of the car
Operation of the alarm is indicated by an acoustic and visual signal (flashing of the front and rear turn signals for several seconds). The alarm activation modes may vary according to the market. There is a maximum number of acoustic/visual cycles. When this is reached the system returns to normal operation.
NOTE
- The engine locking function is guaranteed by the Alfa Romeo CODE, which is automatically activated when the key is extracted from the ignition switch.
- The alarm is adapted to meet requirements in various countries.
To Arm The System
With the doors and decklid closed and the ignition key either turned to STOP (OFF/LOCK) or removed, point the key towards the vehicle then push and release the lock button. The system emits a visual signal and activates door locking. A self-diagnosis stage lasting approximately 30 seconds precedes the activation of the alarm. During the self-diagnosis, the vehicle security light flashes in the instrument panel at a frequency of about one flash per second. After the self-diagnosis stage, the vehicle security light flashes at a lower frequency (approximately one flash every three seconds). If, after the alarm is switched on, a second visual signal is emitted via the vehicle security light in the instrument panel, wait about four seconds and switch off the alarm by pushing the lock button, check that the doors and decklid are closed correctly and then reactivate the system by pushing the unlock button. If the alarm emits a visual signal even when the doors and decklid are closed correctly, a system malfunction has occurred: in this case, contact an authorized dealer.
To Disarm The System
Deactivation
Push the unlock button. The following operations are performed:
- Two brief flashes of the direction indicators.
- Unlocking of the doors.
NOTE
- If the central door locking system is released using the metal insert of the key, the alarm is not disabled.
- In the event of accidental activation of the alarm, or in any case, to interrupt the visual signal cycle when activated, it is possible to push the unlock button or turn the ignition key to MAR (ON/RUN) for at least five seconds, after which the system will deactivate.
Disarming
To completely disable the alarm (e.g. during a lengthy period of vehicle inactivity), lock the vehicle by turning the metal insert of the key in the door lock.
NOTE: If the batteries of the key fob run out or there is a fault in the system, the alarm can be switched off by inserting the key in the ignition switch and turning it to MAR (ON/RUN).
FAQ’s
A: The alarm system typically includes features like intrusion detection, motion sensors, a siren, and remote keyless entry security.
A: The alarm system is usually armed automatically when you lock the vehicle using the remote keyless entry. You can also manually arm it by pressing the lock button on the remote twice.
A: The alarm system is triggered by unauthorized entry into the vehicle, attempted tampering, or any significant impact or motion detected inside the vehicle when it’s armed.
A: Some models may allow you to adjust the sensitivity of the alarm system through the vehicle’s settings menu. Refer to your owner’s manual for instructions.
A: To disarm the alarm system when entering the vehicle, simply unlock the car using the remote keyless entry or the traditional key.
A: Yes, the remote keyless entry typically has a panic button that, when pressed, sounds the alarm and flashes the vehicle’s lights to attract attention in emergency situations.
A: The alarm system typically provides a brief delay after arming to allow you to enter the vehicle without triggering the alarm accidentally. If triggered, you can deactivate it by unlocking the car with the remote keyless entry.
A: Yes, most models have a visual indicator, such as a flashing LED on the dashboard or side mirror, to confirm that the alarm system is armed.
A: You can typically silence the alarm remotely by unlocking the vehicle using the remote keyless entry or pressing the panic button on the remote.
A: If the alarm system is triggered due to a security threat, contact the appropriate authorities immediately, and do not attempt to disarm the system yourself.
A: After the alarm system has been triggered and the threat is resolved, it may automatically reset itself. Check your owner’s manual for specific instructions on resetting the system if needed.
A: Some aftermarket security accessories can be added to enhance the alarm system, but it’s advisable to consult with your authorized Alfa Romeo dealership for compatibility and installation guidance.
A: Regularly test the alarm system by arming it and triggering it intentionally (without breaking any laws). If you encounter issues, consult your dealership for diagnostics and repairs.
A: The alarm system typically operates on the vehicle’s battery, so maintaining a healthy vehicle battery is essential to ensure the alarm functions correctly.
A: Refer to your owner’s manual or contact your authorized Alfa Romeo dealership for comprehensive information about the operation and troubleshooting of the alarm system in your specific 4C Spider model.