2019 Alfa Romeo 4C Spider Transmission Instructions
The 2019 Alfa Romeo 4C Spider is an exciting sports car with a manual drive that is perfect for people who love driving and want a more immersive experience on the road. This transmission, which is known for being precise and quick, lets drivers get the most out of the 4C Spider’s powerful 1.75-liter turbocharged engine, which sends 237 horsepower to the back wheels. The manual transmission gives the driver full control, whether they are going around tight corners or speeding down the open highway. It gives them a link to the road that is both satisfying and real. This guide will show you everything you need to know to drive the 2019 Alfa Romeo 4C Spider with a manual transmission, so you can get the most out of this Italian sports car’s responsiveness.
Automatic Transmission
To start the engine, press the brake pedal. The system engages NEUTRAL (N) automatically. After the starting procedure, FIRST (1st) gear or RE-VERSE (R) can be engaged. Irrespective of the mode selected (AUTO/MANUAL), to engage FIRST (1st) gear or REVERSE (R), it is necessary to press the brake pedal and push the 1 button on the transmission control panel (or the “+’ steering wheel stalk) to engage FIRST (1st) gear or the R button to engage REVERSE (R). When the FIRST (1st) gear is engaged, the system sets itself to AUTO mode. NEUTRAL (N) can be engaged again by pushing the N button with the brake pedal pressed. When the 1, N, or R buttons are pushed (or “+” steering wheel stalk is operated) without pressing the brake pedal, no gear change request is implemented by the system.
NOTE: REVERSE (R) cannot be engaged by pushing the “-” stalk on the steering wheel.
Normal Starting
NOTE: Normal starting of either a cold or a warm engine is obtained without pumping or pressing the accelerator pedal.
Turn the ignition switch to the AVV (START) position and release it when the engine starts. If the engine fails to start within 10 seconds, turn the ignition switch to the STOP (OFF/LOCK) position, wait 10 to 15 seconds, then repeat the “Normal Starting” procedure.
Cold Weather Operation
Your engine is designed to operate at temperatures as low as 0°F (-18°C).
CAUTION: Use of the recommended oil and adhering to the prescribed oil change intervals is important to prevent engine damage and ensure satisfactory starting in cold conditions.
If the Engine Fails To Start
WARNING: Never pour fuel or other flammable liquids into the throttle body air inlet opening in an attempt to start the vehicle. This could result in a flash fire causing serious personal injury.
CAUTION
- Do not attempt to push or tow your vehicle to get it started. Vehicles equipped with an Alfa Twin Clutch Transmission cannot be started this way. Unburned fuel could enter the catalytic converter and once the engine has started, ignite and damage the converter and vehicle.
- To prevent damage to the starter, do not continuously crank the engine for more than 15 seconds at a time. Wait 10 to 15 seconds before trying again.
After Starting
The idle speed is controlled automatically, and it will decrease as the engine warms up.
Turbo Charger “Cool Down”
This vehicle is equipped with an after-run pump to cool the turbocharger after the engine is shut off. Depending on the type of driving and the amount of cargo, the pump will run for up to five minutes after the engine has been shut off to circulate coolant through the turbocharger. Although the pump is rubber-mounted for quiet operation, it is normal to hear it running during this time.
FAQ’s
Answer: The 2019 Alfa Romeo 4C Spider features a 6-speed manual transmission.
Answer: Alfa Romeo recommends using a high-quality synthetic manual transmission fluid. Refer to your owner’s manual for specific recommendations.
Answer: To engage reverse, lift up the collar on the gear lever and move it to the left and forward.
Answer: To shift gears smoothly, release the accelerator, depress the clutch pedal fully, move the gear lever to the desired gear, and then release the clutch pedal gradually while applying the accelerator smoothly.
Answer: Use the clutch pedal when shifting gears, starting from a stop, or coming to a complete stop.
Answer: While it’s possible to skip gears when downshifting, it’s recommended to downshift sequentially to maintain better control of the vehicle and engine braking.
Answer: The “N” position is neutral, which disengages the transmission from the engine. Use it when the vehicle is stationary and the engine is running.
Answer: Rev-match by blipping the throttle while downshifting to match engine and road speed. This prevents engine over-revving and maintains stability.
Answer: If you stall the engine, depress the clutch pedal, start the engine, and engage first gear before moving off.
Answer: Always engage the parking brake when parking the vehicle, regardless of whether it’s on a flat surface or an incline.
Answer: Yes, downshifting to a lower gear provides engine braking and helps maintain control when descending steep hills.
Answer: While it’s possible to skip gears when upshifting, it’s generally best to shift sequentially to maintain smooth acceleration.
Answer: To launch smoothly, depress the clutch pedal fully, engage first gear, and gradually release the clutch pedal while applying the throttle. Avoid excessive wheel spin.
Answer: Refer to the owner’s manual for recommended transmission fluid change intervals. Regularly check the fluid level to ensure it’s within the specified range.
Answer: Towing guidelines may vary by region and configuration. Consult the owner’s manual or a qualified Alfa Romeo dealer for specific towing instructions for your 4C Spider model.