2019 Alfa Romeo Stelvio Engine Oil and Fluids
In the world of luxury SUVs, the 2019 Alfa Romeo Stelvio is a shining example of Italian style and performance. Its powerful but refined engine is made possible by a careful balance of fluids that keep the car running at its best. From the engine oil that lubricates the heart of the Stelvio’s motor to the coolant, transmission fluid, and brake fluid, all of these parts work together to make sure that the car runs well and lasts a long time. In this detailed guide, we go into the complicated world of engine oil and fluids for the 2019 Alfa Romeo Stelvio. We look at their types, recommended specifications, and the important role they play in keeping the engine healthy, giving it the best performance, and making sure that every trip is a testament to Italian engineering precision and driving pleasure.
2024 Alfa Romeo STELVIO Specs, Price, Features, Mileage and Review
ENGINE COMPARTMENT
Checking Levels 2.0L T4 MAir Engine
- Engine Coolant Reservoir Cap
- Brake Fluid Reservoir Access Cover
- Windshield/Headlights Washer Fluid Reservoir Cap
- Intercooler Coolant Reservoir Cap
- Engine Oil Filler Cap
Engine Oil
The engine oil level can be seen on the instrument cluster display every time the engine is started, or on the Information and Entertainment system display by activating on the main menu (MENU button) the following functions in sequence:
- “Apps”
- “My Car”
- “Oil Level”
Check on the display using the 6 notches that the oil level is between the MIN and MAX level: 1 notch MIN level, 6 notches MAX level. If the oil level is close to or below the MIN mark, add oil gradually through the filler,(refer to “Top-Up And Oil Level Indication Update On Display” in this section) considering that each notch shown on the display corresponds to approximately 8.8floz(250ml).
Caution: Make sure not to add too much oil when topping off the engine. Engine oil in excess may damage the engine. Have the vehicle checked. Never exceed the MAX level when topping off engine oil. The oil level is not refreshed immediately on the display after topping off. Consequently, wait for the oil level to be refreshed on the display and follow the procedure below.
Note: Always reinstall the oil cap and tighten it to proper torque whenever it is removed to add oil to the engine. Never run the engine with the cap removed this could cause oil to leak from the engine.
Top-Up And Oil-Level Indication Update On Display
If an engine oil top-off is needed, to ensure the correct indication of the oil level on the display, leave the vehicle on flat ground with the engine running for approximately five minutes (temperature higher than 176°F (80°C)) and shut the engine. Then, start the engine again, and idle it for about five minutes.
Note: If you have added the specified amount of oil and the indicator is not reading “Full”, please contact an authorized dealer.
Warning: If the engine oil is being topped up, wait for the engine to cool down before loosening the filler cap, particularly for vehicles with aluminum caps (if equipped). risk of burns!
Caution
- The oil level must never exceed the MAX mark.
- If the MAX mark is exceeded MAX (the last notch on the right turns red) after the fill-up, go to an authorized dealer as soon as possible to have the oil in excess removed.
- Do not add oil with specifications different from those of the oil already in the engine.
- Used engine oil and oil filters contain substances that are harmful to the environment. To change the oil and filters, we advise you to contact an authorized dealer.
Engine Coolant Fluid
If the level is too low, unscrew the cap of the reservoir and add the fluid described in the “Technical Specifications” chapter.
Washer Fluid For Windshield/Headlights
If the level is too low, remove the reservoir cap and lift the filler. Then, add the fluid described in “Technical Specifications”.
Note: The headlight washing system will not work if the liquid level is low (situation indicated by the symbol on the instrument cluster display). The windshield washer will keep working.
Brake Fluid
Check that the fluid is at the maximum level. If the fluid level in the tank is low, contact your authorized dealer to have the system checked.
Automatic Transmission Activation System Oil
The transmission control oil level should only be checked at your authorized dealer.
Useful Advice For Extending The Life Of Your Battery
To avoid draining your battery and make it last longer, observe the following instructions:
- When you park the vehicle, ensure that the doors and liftgate are closed properly to prevent any lights from remaining inside the passenger’s compartment.
- Do not keep accessories (e.g. radio, hazard warning lights, etc.) switched on for a long time when the engine is not running.
- Before performing any operation on the electrical system, disconnect the negative battery cable.
- If you wish to install electrical accessories after purchasing the vehicle that requires a permanent electrical supply (e.g. alarm, etc.), or accessories that influence the electrical supply requirements, contact your authorized dealer, whose qualified staff will evaluate the overall electrical consumption.
Caution: If the charge level remains under 50% for a long time, the battery may be damaged by sulphation, reducing its capacity and efficiency at the start of the vehicle. The battery is also more prone to the risk of freezing (at temperatures as high as 14°F (-10°C).
Note: After the battery is disconnected, the steering must be initialized. The warning light on the instrument panel switches on to indicate this. To carry out this procedure, simply turn the steering wheel from one end to the other, and then turn it back to the central position.
FAQ
The Stelvio typically requires high-quality synthetic engine oil that meets the manufacturer’s specifications, which are often detailed in the owner’s manual.
It’s advisable to check the engine oil level regularly, at least once a month, to ensure it remains within the recommended range.
The recommended oil change interval is typically every 10,000 miles or once a year, but it may vary based on driving conditions and the type of oil used.
Checking the transmission fluid level typically requires the vehicle to be running, with the transmission in “Park” or “Neutral.” Consult the owner’s manual for specific instructions.
Transmission fluid replacement intervals vary but are often recommended every 30,000 to 60,000 miles. Refer to the owner’s manual for precise guidelines.
The Stelvio typically requires a specific type of coolant, such as ethylene glycol-based coolant. Refer to the owner’s manual for the recommended coolant type.
To check the coolant level, make sure the engine is cool, and then inspect the coolant reservoir or radiator for the proper level of coolant.
Coolant replacement intervals can vary, but it is often recommended every 30,000 to 60,000 miles or as specified in the owner’s manual.
Brake fluid serves as a hydraulic medium for the braking system. It should typically be replaced every two years or as recommended in the owner’s manual to maintain brake performance.
While you can often check the brake fluid level, it’s important to exercise caution when handling brake fluid. If the level is low, consult the owner’s manual and consider having a professional service it.
Proper engine oil and fluid levels are essential for lubricating and cooling vital components, reducing friction, and ensuring the longevity and optimal performance of Stelvio’s engine and systems.
If you notice fluid leaks, it’s essential to have them inspected and repaired promptly by an authorized Alfa Romeo service center to prevent potential damage or safety hazards.
Detailed information about engine oil and fluid requirements can be found in the owner’s manual provided with the vehicle or obtained from an authorized Alfa Romeo dealership.
Maintaining proper engine oil and fluid levels exemplifies Alfa Romeo’s commitment to precision engineering by ensuring that Stelvio’s performance and longevity meet the highest standards, delivering both power and reliability in perfect harmony.