This light monitors various brake functions, including brake fluid level and parking brake application. If the brake light turns on it may indicate that the parking brake is applied, that the brake fluid level is low, or that there is a problem with the anti-lock brake system reservoir.

If the light remains on when the parking brake has been disengaged, and the fluid level is at the full mark on the master cylinder reservoir, it indicates a possible brake hydraulic system malfunction or that a problem with the Brake Booster has been detected by the Anti-Lock Brake System (ABS) / Electronic Stability Control (ESC) system. In this case, the light will remain on until the condition has been corrected. If the problem is related to the Brake Booster, the ABS pump will run when applying the brake, and a brake pedal pulsation may be felt during each stop.

The light also will turn on when the parking brake is applied with the ignition switch in the ON/RUN position.

This light shows only that the parking brake is applied. It does not show the degree of brake application.

For low brake fluid levels, go to an authorized dealer to have the system checked as soon as possible.

Release the electric park brake, then check that the warning light has turned off.

If the warning light stays on, contact an authorized dealer.

The simultaneous turning on of the BRAKE (red) and  (amber) warning lights with the engine on indicates either a failure of the EBD system or that the system is not available. In this case, the rear wheels may suddenly lock and the vehicle may swerve when braking abruptly.

Drive very carefully to the nearest authorized dealer to have the system inspected immediately.

This light will turn on for four to eight seconds as a bulb check when the ignition is placed in the ON/RUN position. If the light is either not on during startup, stays on, or turns on while driving, have the system inspected at an authorized dealer as soon as possible. This light will illuminate with a single chime when a fault with the Air Bag Warning Light has been detected, it will stay on until the fault is cleared. If the light comes on intermittently or remains on while driving, have an authorized dealer service the vehicle immediately.

If the problem persists, contact an authorized dealer.

When the ignition is first placed in the ON/RUN position, if the driver’s seat belt is unbuckled, a chime will sound and the light will turn on. When driving, if the driver or front passenger seat belt remains unbuckled, the Seat Belt Reminder Light will flash or remain on continuously and a chime will sound. Refer to “Occupant Restraint Systems” in “Safety” for further information.

Always wear your seat belt when operating the vehicle.

This telltale indicates engine oil temperature is high.

This light monitors the Anti-Lock Brake System (ABS). The light will turn on when the ignition is placed in the ON/RUN position and may stay on for as long as four seconds.

If the ABS light remains on or turns on while driving, then the Anti-Lock portion of the brake system is not functioning and service is required. However, the conventional brake system will continue to operate normally if the brake indicator light is not on.

If the ABS light is on, the brake system should be serviced as soon as possible to restore the benefits of Anti-Lock Brakes. If the ABS light does not turn on when the ignition is placed in the ON/RUN position, have the light inspected by an authorized dealer.

The warning light switches on and a message is displayed to indicate that the tire pressure is lower than the recommended value and/or that slow pressure loss is occurring. In these cases, optimal tire duration and fuel consumption may not be guaranteed.

Should one or more tires be in the condition mentioned above, the display will show the indications corresponding to each tire in sequence.

The indicator light will illuminate to indicate that the tire pressure is lower than the recommended value and/or that slow pressure loss is occurring. In these cases, optimal tire duration and fuel consumption may not be guaranteed.

When the ignition is cycled to ON, the indicator light illuminates but should turn off as soon as the engine is started.

ESC System Intervention: Intervention by the system is indicated by the flashing of the indicator light: it indicates that the vehicle is in critical stability and grip conditions.

In these cases, contact an authorized dealer as soon as possible.

When the ignition is cycled to ON, the indicator light illuminates but should turn off as soon as the engine is started.

The indicator light illuminates to indicate that some active safety systems have been partially or totally deactivated. For further details about the active safety systems, refer to “Active Safety Systems” in “Safety.” When the active safety systems are reactivated, the indicator light turns off.

The indicator illuminates when the rear fog light is activated.

In normal conditions, when the ignition is cycled to ON, the indicator light illuminates, but it should turn off as soon as the engine is started.

The operation of the indicator light may be checked by the traffic police using specific devices. Comply with the laws and regulations of the country where you are driving.

Under these conditions, the vehicle can continue traveling at moderate speed but without demanding excessive effort from the engine or high speed. Prolonged use of the vehicle with the indicator light on constantly may cause damage. Contact an authorized dealer as soon as possible.

This indicator light informs the driver that the frontal collision alarm function is not enabled.

Drive carefully and contact an authorized dealer as soon as possible.

The indicator light (or the symbol in the display) illuminates when about 2.4 gallons (9 liters) of fuel is left in the tank.

Refuel the vehicle.

The indicator light (or the symbol in the display) illuminates when about 2.4 gallons (9 liters) of fuel is left in the tank.

Refuel the vehicle.

This indicator will illuminate when the park lights or headlights are turned on.

Headlight Off Delay

This function allows the headlights to remain on for 30, 60, or 90 seconds after the ignition is placed in the OFF position.

The instrument cluster directional arrow will flash independently for the left turn signal as selected, as well as the exterior turn signal lamp(s) (front and rear) as selected when the multifunction lever is moved down (left). This directional arrow will flash in conjunction with the right directional arrow when the hazard warning light button is pushed.

The instrument cluster directional arrow will flash independently for the right turn signal as selected, as well as the exterior turn signal lamp(s) (front and rear) as selected when the multifunction lever is moved up (right). This directional arrow will flash in conjunction with the left directional arrow when the hazard warning light button is pushed.

This indicator light will illuminate when the automatic high-beam headlights are activated.

This indicator shows that the high-beam headlights are on. Push the multifunction control lever away from you to switch the headlights to a high beam. Push the lever a second time to switch the headlights back to low beam.

Pull the lever toward you for a temporary high beam on, a “flash to pass” scenario.

This telltale indicates low engine oil pressure. If the telltale turns on while driving, stop the vehicle and shut off the engine as soon as possible. A chime will sound when this telltale turns on. Do not operate the vehicle until the cause is corrected. This telltale does not indicate how much oil is in the engine.

NOTE:

Do not use the vehicle until the failure has been solved. The illumination of the telltale does not indicate the amount of oil in the engine: the oil level can be checked on the display upon entering the vehicle and also by activating the “Oil level” function on the Information and Entertainment System.

Contact an authorized dealer as soon as possible.

This telltale warns of an overheated engine condition. If the engine coolant temperature is too high, this indicator will illuminate and a single chime will sound. If the temperature reaches the upper limit, a continuous chime will sound for four minutes or until the engine is allowed to cool whichever comes first.

If the vehicle is used under demanding conditions (e.g. in high-performance driving): slow down and, if the telltale stays on, stop the vehicle. Stop for two or three minutes with the engine running and slightly accelerated to facilitate better coolant circulation, then turn the engine off. Check that the coolant level is correct as described above.

If the telltale remains on, you may not have steering assistance, and the effort required to operate the steering wheel may be increased; steering is, however, possible.

NOTE: After the battery is disconnected, the steering wheel must be initialized. The Power Steering Failure light on the instrument panel will illuminate to indicate this. To carry out this procedure, simply turn the steering wheel all the way from one end to the other, and then turn it back to the central position.

Contact an authorized dealer as soon as possible.

The telltale illuminates when one or more doors are not completely shut. A chime will signal when the doors are open and the vehicle is moving.

Close all the doors properly.

The telltale turns on when the hood is not properly closed, along with the icon, an image of the vehicle with an open hood appears on the display.

A buzzer is heard when the hood is open and the vehicle is moving.

Fully close the hood.

The telltale turns on when the liftgate is not properly closed, along with the icon, an image of the vehicle with an open liftgate appears on the display.

A buzzer is heard when the liftgate is open and the vehicle is moving.

Close the liftgate.

The telltale illuminates, together with a buzzer warning, indicate that the automatic transmission is faulty.

This telltale, along with the related message, signals a failure in the electronic throttle control system (ETC).

If a failure is detected, the telltale illuminates while the engine is running.

If the telltale flashes with the engine running, immediate intervention is required. A loss of performance, irregular/ high idling speed or engine stopping might take place and the vehicle may need to be towed.

Contact an authorized dealer as soon as possible to have the failure eliminated.

This telltale appears on the panel when the engine oil level falls below the minimum recommended value.

OIL OVER MAXIMUM LEVEL

The telltale turns on, along with the respective message on the instrument cluster display, to indicate that the engine oil level is too high.

Contact an authorized dealer to have the system checked. Run the engine under 3000 RPM during this time.

The illumination of the telltale signals a failure in the automatic steering correction system.

Contact an authorized dealer to have the system checked.

The illumination of the telltale with the engine on corresponds to an alternator failure.

Contact an authorized dealer as soon as possible.

When the telltale illuminates, it indicates an excessive temperature of the brake discs.

The symbol appears, together with a message on the display, in case of activation of the Drive Attention Assist (DAA) system.

Engine Immobilizer System Failure

The telltale will illuminate to report a failure of the Engine Immobilizer system.

Contact an authorized dealer as soon as possible.

The telltale will illuminate when the ignition is cycled to ACC position, to indicate a possible break-in attempt detected by the alarm system.

Electronic Key Not Recognized

The telltale will illuminate when the engine is started and the electronic key is not recognized by the system.

Alarm System Failure

The telltale will illuminate to report an alarm system failure.

The telltale will illuminate after an accident has occurred and the system has shut the fuel off.

The telltale will illuminate when the system has failed or is not available.

The telltale is illuminated only for a limited time.

NOTE:

After the first indication, each time the engine is started the symbol will continue to illuminate as described above until the oil is changed.

If the telltale flashes, this does not mean that there is a fault in the vehicle, rather it simply reports that it is now necessary to change the oil as a result of regular use of the vehicle. The deterioration of engine oil is accelerated by using the vehicle for short drives, preventing the engine from reaching operating temperature.

Contact an authorized dealer as soon as possible.

The telltale will illuminate in the event of engine oil pressure sensor failure.

Contact an authorized dealer as soon as possible.

The telltale will illuminate in the event of engine oil level sensor failure.

Contact an authorized dealer as soon as possible.

The telltale will illuminate in the case of failure of the Forward Collision Warning system.

Contact an authorized dealer as soon as possible.

This telltale will illuminate to report a Stop/Start system failure.

The telltale will illuminate in the case of failure of the automatic windshield wiper.

The telltale will illuminate in the case of failure of the automatic low beam alignment.

The telltale will illuminate in the event of a Blind Spot Monitoring system failure.

The telltale will illuminate in the event of fuel level sensor failure.

The telltale will illuminate to indicate a failure on the following lights: daytime running lights (DRLs) / parking lights / trailer turn signal indicators (if present) / trailer lights (if present) / side lights / turn signal indicators / rear fog light / reversing light/brake lights/license plate lights.

Replace the bulb or the relevant fuse. Contact an authorized dealer.

The telltale will illuminate in the event of keyless system failure.

Contact an authorized dealer as soon as possible.

The telltale will illuminate in the event of fuel cut-off system failure.

Contact an authorized dealer as soon as possible.

The telltale will illuminate to indicate that the lane departure alarm function is not enabled.

The telltale will illuminate in the event of a fault in the Lane Departure Warning system.

Contact an authorized dealer as soon as possible.

The telltale will illuminate to report a failure of the automatic high beam headlights.

Contact an authorized dealer as soon as possible to have the failure eliminated.

The telltale will illuminate in the case of transmission overheating, after a particularly demanding use. In this case, an engine performance limitation is carried out.

Wait for the telltale to turn off with the engine off or idling.

The telltale will illuminate to report a failure of the audio system.

While driving, the telltale will illuminate to signal a Speed limit system failure.

Lights up if the fuel tank cap is open or not properly closed.

Tighten the cap properly.

The telltale will illuminate and a message will display to signal a failure in the electric park brake system.

This failure may partially or completely block the vehicle because the parking brake could remain activated even if automatically or manually disengaged using the relevant controls.

This telltale will illuminate to indicate that the vehicle coolant level is low.

This light will illuminate when the Adaptive Cruise Control (ACC) is not operating and needs service.

This light will illuminate when the brake pads have reached their wear limit.

NOTE: Always use Alfa Romeo genuine parts or similar — the Integrated Brake System (IBS) is best able to detect anomalies with factory parts.

WEAR ON CCB BRAKE DISCS — IF EQUIPPED

This light will illuminate when the carbon ceramic brake discs have reached their wear limit.

NOTE: Always use Alfa Romeo genuine parts or similar — the Integrated Brake System (IBS) is best able to detect anomalies with factory parts.

The telltale will illuminate to signal a failure in the dynamic drive control system.

Signals a windshield wiper failure.

Signals information and failures.

The accompanying messages describe the failure.

This telltale will illuminate along with an accompanying message when the AWD dynamic control system is temporarily deactivated to prevent damage. The traction system will work in RWD mode in this instance.

This telltale will illuminate to indicate that the AWD dynamic control system is temporarily deactivated to prevent damage. The traction system will work in RWD mode in this instance.

This telltale will illuminate to indicate that the ABS system has been activated.

The telltale will illuminate to indicate the automatic directional light system failure.

The telltale will illuminate when the most comfortable suspension setting is activated.

While driving, if the telltale illuminates, it signals a failure in the suspension system.

The telltale will illuminate to indicate that the level of the windshield and headlight washing fluid (if any) is low.

The telltale illuminates to indicate that there has been a failure in the control unit that manages the trailer lights.

The telltale illuminates to indicate a liftgate electric opening/closing system failure.

The symbol comes on in the event of a Driver Attention Assist (DAA) system failure.

The symbol lights up in case of Highway Assist (HAS) or Traffic Jam Assist (TJA) system failure.

The telltale will illuminate when the headlights are turned on.

The symbol lights up when the automatic headlights are on.

The telltale will illuminate in the case of Stop/Start system intervention (stopping the engine).

When the engine is restarted, the telltale will shut off (for the engine restarting modes refer to “Stop/Start System” in “Starting And Operating”).

The telltale will illuminate when the Speed Control system is activated.

The symbol comes on when the Adaptive Cruise Control system is activated.

The telltale illuminates when the HDC system intervenes.

The telltale will illuminate when the automatic high beam headlights are activated.

The telltale will illuminate when the high beam headlights are activated.