2020 Alfa Romeo Stelvio Quadrifoglio Display Instruction
The display system in the 2020 Alfa Romeo Stelvio Quadrifoglio is the pinnacle of technological sophistication. It combines Italian artistry with cutting-edge technology to make an immersive and easy-to-use interface that makes driving more enjoyable. Whether it’s a touchscreen infotainment system or a digital instrument cluster, this high-performance SUV’s screen is where you can find information about the car, entertainment, directions, and ways to connect with other devices. This detailed guide delves into the 2020 Alfa Romeo Stelvio Quadrifoglio’s display system, revealing its features, functions, customization options, and useful tips. This will allow drivers to fully utilize their abilities and enjoy the seamless blend of performance and technology that makes this vehicle truly exceptional.
INSTRUMENT CLUSTER DISPLAY
Instrument Cluster Display Description
This vehicle is equipped with a driver-interactive display that is located in the instrument cluster. When one or more of the doors have been opened or closed and the ignition is in the OFF position, the instrument cluster will display the vehicle mileage for a few seconds.
Reconfigurable Instrument Cluster Display
During operation, the instrument cluster display is divided into multiple sections which show driving data, warnings, and failure indications.
Reconfigurable Display Items
- Headlight Warning Lights
Displays the headlight warning light for either of the following active modes:- Headlights
- Automatic Headlights
- Gear Selector Information
Displays the following information controlled by the gear selector function:- P = PARK
- R = REVERSE
- N = NEUTRAL
- D = DRIVE (automatic forward speed)
- AutoStick: + shifting to a higher gear in manual (sequential) driving mode –shifting to a lower gear in sequential driving mode
- Forward Collision, Lane Departure, Cruise Control
Displays operations for the following modes:- Forward Collision Warning (FCW)
- Lane Departure Warning (LDW)
- Cruise Control (CC) or Active Cruise Control (ACC) (if equipped)
- Speed Limit Warning Light
Shows information regarding the Speed Limiter function. - Compass
- Reconfigurable Main Area Can display the following screens:
- Home
- Trip A
- Trip B (can be activated/deactivated through the Information and Entertainment System)
- Performance
The screens can be selected, on rotation, by pushing the MENU selection button on the windshield wiper stalk.
Depending on the driving mode chosen using the Alfa DNA Pro (Dynamic, Natural, Advanced Efficiency, and RACE), the screens can be graphically different. Navigation instructions and call information can be set and displayed in the Information and Entertainment System.
Home
The parameters shown on the display for the Dynamic, Natural, and Advanced Efficiency modes are: - Time
- Outside Temperature
- Current Speed (shown if the repeat modes of the Phone and Navigation functions are not active)
- Range
In RACE mode, the consumption indication index is not active and a sports gearshift indicator is displayed. The sports gearshift indicator is represented by three yellow segments; if the third indicator, characterized by the word “SHIFT,” is on, it means that the gear should be shifted.
Trip A And B
For all driving modes (Dynamic, Natural, Advanced Efficiency, and RACE) with the ignition device ON, the “Trip computer” can be used to display the measurements regarding the operating state of the vehicle. This function is characterized by two separate records, called “Trip A” and “Trip B” (the latter can be deactivated by the Information and Entertainment System), where the “complete missions” (journeys) are recorded in a reciprocally independent manner. “Trip A” and “Trip B” are used to display the values relating to:
- Distance travelled
- Average fuel consumption
- Average speed
- Active trip
- Fuel consumption indicator
To reset the values, push and hold down the MENU button on the windshield wiper stalk.
Performance
The displayed parameters differ according to the active mode. The modes which can be selected using the Alfa DNA Pro system are:
- Natural
The screen graphically reproduces some parameters closely linked to the efficiency of the driving style, with a view to limiting consumption.
- Advanced Efficiency
The three central icons on the screen indicate the effectiveness of the driving style, linked to the following parameters: acceleration, deceleration, and gear shifts, with a view to limiting consumption. The bar below the icons shows current consumption and the green line represents the optimal area. The globe lights up gradually according to lower consumption.
- Dynamic
The displayed parameters are related to vehicle stability, and the graphs illustrate the trend of the longitudinal/lateral accelerations (G-meter information), considering gravity acceleration as a reference unit.
Lateral acceleration peaks are also indicated.
- RACE
The displayed parameters are related to vehicle stability, and the graphs illustrate the trend of the longitudinal/lateral accelerations (G-meter information), considering gravity acceleration as a reference unit. Lateral acceleration peaks are also indicated.
Vehicle Range
Indicates the miles left before the fuel tank is empty. Displays the position by indicating the cardinal direction.
Failure Warning Lights
Area dedicated to displaying failures, the following symbols could be displayed on rotation:
- Low criticality symbols (yellow amber)
- High criticality symbols (red)
Odometer
Indicates the total miles traveled. U.S. Federal regulations require that upon transfer of vehicle ownership, the seller certifies to the purchaser the correct mileage that the vehicle has been driven. If your odometer needs to be repaired or serviced, the repair technician should leave the odometer reading the same as it was before the repair or service. If s/he cannot do so, then the odometer must be set at zero, and a sticker must be placed in the door jamb stating what the mileage was before the repair or service. It is a good idea for you to make a record of the odometer reading before the repair/service so that you can be sure that it is properly reset, or that the door jamb sticker is accurate if the odometer must be reset at zero.
Customer Programmable Settings
Multiple settings can be programmed by the user using the Information and Entertainment System. This section describes only the basic settings:
- Units & Language
- Time & Date
- Cluster
To access the settings list in the Information and Entertainment System, proceed as follows:
- Push the MENU button to access the main menu.
- Select “Settings” from the main menu using the Rotary Knob.
Units & Language
The following settings can be modified under the “Units & Language” menu:
- Measure Units: select US, metric, or custom. The custom option allows for individual selection of the unit measures
- Language: change the language of the system
- Restore Settings: restores the factory settings
To access and change the setting, turn and push the Rotary Pad.
Clock & Date
The following settings can be modified under the “Clock & Date” menu:
- Sync With GPS Time: activates or deactivates the clock synchronization through the GPS. If the function is deactivated, the option Set
- Time and Set Date are enabled
- Set Time: set the time manually
- Time Format: set the time format to either a 12-hour or a 24-hour clock)
- Set Date: set the date manually
- Restore Settings: restores the factory settings
To access and change the setting, turn and push the Rotary Pad.
Cluster
The following settings can be modified under the “Cluster” menu:
- Warning Buzzer Volume: set the volume of the warning buzzer
- Trip B: activate or deactivate the Trip function
- Phone Repeat: activate or deactivate repeating the Phone function screens on the instrument cluster display
- Restore Settings: restores the factory settings
- To access and change the setting, turn and push the Rotary Pad.
FAQ’s
Answer: The display system typically activates automatically when you start the vehicle’s engine. If not, you can usually power it on using the ignition button or touchscreen.
Answer: The main components typically include the touchscreen infotainment system, digital instrument cluster, and potentially a heads-up display (HUD).
Answer: Yes, many infotainment systems allow you to customize the home screen layout, including the arrangement of widgets, shortcuts, and information panels.
Answer: You can usually adjust display brightness and contrast through the settings menu or dedicated controls in the vehicle.
Answer: Yes, the Stelvio Quadrifoglio typically supports both Apple CarPlay and Android Auto for seamless smartphone integration.
Answer: You can typically control navigation, phone calls, media playback, and other functions using voice commands. Consult the owner’s manual for supported commands.
Answer: Access the Bluetooth settings on the infotainment system, put your phone in pairing mode, and follow the on-screen instructions to complete the pairing process.
Answer: To update the software, connect the vehicle to a Wi-Fi network or use a USB drive with the necessary software updates, following the instructions provided in the owner’s manual.
Answer: Yes, you can typically customize the information displayed on the digital instrument cluster using steering wheel controls or the infotainment system.
Answer: Many display systems have a night mode or dark theme that reduces glare at night and is easier on the eyes.
Answer: You can usually access the navigation system by selecting the navigation icon on the touchscreen or using voice commands if supported.
Answer: Yes, many vehicles allow you to control climate settings, including temperature, fan speed, and air distribution, through the display system.
Answer: If the system freezes or encounters issues, try restarting the vehicle. If problems persist, consult the owner’s manual for troubleshooting tips or seek assistance from an authorized Alfa Romeo service center.
Answer: The display system typically provides access to vehicle diagnostics and maintenance information, such as tire pressure, oil life, and service reminders, through dedicated menus.
Answer: It’s crucial to minimize distractions while driving. Use voice commands or program settings before you start driving to ensure your focus remains on the road.