2020 Alfa Romeo Stelvio Quadrifoglio Keys and Smart Key Instructions

The 2020 Alfa Romeo Stelvio Quadrifoglio’s keys and smart key system are important parts that combine cutting-edge technology with Italian artistry to make the driving experience better. These keys can do more than just lock and open doors. They also allow keyless entry, start the engine, and use of advanced vehicle features. With the Smart Key Instructions, we’ll go into detail about how the 2020 Alfa Romeo Stelvio Quadrifoglio’s key and smart key system work. We’ll show you how to set them up, how to use them, and give you useful tips on how to get the most out of the convenience and safety that this advanced technology offers, making sure that every drive in this performance-focused SUV is both easy and thrilling.

KEYS

Key Fob
Your vehicle uses a keyless ignition system. This system includes a key fob and a keyless push-button ignition. The Remote Keyless Entry key fob allows you to lock or unlock the doors and liftgate or activate the Panic Alarm from a distance. The key fob does not need to be pointed at the vehicle to activate the system.

PANIC Function
The key fob contains a PANIC button. Should you ever feel threatened, push this button and the vehicle security alarm will sound.
To activate the PANIC function, push and hold the PANIC button for at least one second. When the panic alarm is active, the headlights turn on, the turn signals flash, the horn honks intermittently, and all interior adjustable lights turn on. The panic alarm will remain active for three minutes, and can be deactivated:

• By pushing the PANIC button again.
• Automatically if the vehicle speed exceeds 5 mph (8 km/h).
  In both cases, the panic alarm is immediately deactivated.

Warning

1. Before exiting a vehicle, always shift the automatic transmission into PARK, apply the parking brake, turn the engine OFF, remove the key fob from the vehicle, and lock your vehicle.
2. Never leave children alone in a vehicle, or with access to an unlocked vehicle.
3. Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking brake, brake pedal, or the gear selector.
4. Do not leave the key fob in or near the vehicle, or in a location accessible to children. A child could operate power windows, and other controls, or move the vehicle.
5. Do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death.

Operation

Unlocking The Doors And The Liftgate
Briefly pushing the unlock button on the key fob will unlock the doors and liftgate, turn on the interior lights, and flash the turn signals once (if activated from the Information and Entertainment System). Push and release the unlock button on the key fob once to unlock the driver-side front door or twice within one second to unlock all doors and the liftgate. It is, however, possible to change the current setting through the Information and Entertainment System menu, so that the system unlocks:

• All doors on the first push of the key fob unlock button.
• The driver’s door on the first push of the key fob unlock button.
• The liftgate “independently” or “with doors”.

Flashing of the turn signals upon locking/unlocking the doors, and activation of the courtesy light upon unlocking the doors, can be activated or deactivated through the Information and Entertainment System. For further information, refer to the Information and Entertainment System Owner’s Manual Supplement. The doors can also be unlocked by using the emergency key, located inside the key fob.

Door And Liftgate Locking
Briefly pushing the lock button on the key fob will lock the doors and liftgate, switch off the internal lights, and flash the turn signals (if activated in the Information and Entertainment System).
If one or more doors are open, these doors will also lock, and this is indicated by a rapid flashing of the turn signals. The doors will unlock again only if the key fob is detected inside the passenger compartment.
The doors can be locked by using the emergency key in the driver’s side door lock.

Opening The Liftgate
Rapidly push the button on the key fob twice to open the liftgate. The turn signals will flash to indicate that the liftgate has been opened.

Remote Start
The remote start button on the key fob enables engine starting (push the remote start button on the key fob twice to enable engine starting).

Car Finder
The Car Finder feature will temporarily activate the turn signals and headlights to assist with locating the vehicle in a crowded area.

To activate, push the lock or unlock button to remotely and temporarily activate the turn signals and headlights. Pushing the lock or unlock button again will reactivate the lights switch on a timer (if the parking lights function was already active, it will remain active). This function is available only if the doors are closed.

Replacing The Electronic Key Fob Battery
To replace the battery, proceed as follows:

1. Push the sides of the key fob inward and extract the cover pulling downwards.
2. Remove the emergency key from its housing.
3. Remove the battery plug by rotating it counterclockwise.
4. Remove the battery from its slot and replace it with a new one of the same type.

Proceed in reverse order to reassemble the key.
Caution: The battery replacement operation must be done with care, in order not to damage the electronic key.

Request For Additional Keys
The system can recognize up to eight key fobs with remote control. To guarantee that the engine starts and the vehicle operates correctly, use only electronic key fobs specifically coded for the vehicle’s electronics. If an electronic key fob is coded for a vehicle, it cannot be used on any other vehicle.

General Information
The following regulatory statement applies to all radio frequency (RF) devices equipped in this vehicle: This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

IGNITION SYSTEM

Operation
To activate the keyless ignition, the key fob must be inside the vehicle.

Keyless Ignition START/STOP Button
The keyless ignition has the following modes:

1. STOP: engine off, steering locked. Some electrical devices (e.g. central door locking system, alarm, etc.) are still available.
2. ON: all electrical devices are available. This state can be entered by pushing the ignition button once, without pressing the brake pedal.
3. AVV: engine starting. This state can be entered by pushing the ignition button once while pressing the brake pedal.

Note

• With the keyless ignition in the ON position: if 30 minutes pass with the gear selector in P (Park) and the engine stops, the keyless ignition will automatically reset to the STOP position.
• With the engine started it is possible to remove the key fob from the vehicle. The engine will remain running and the instrument cluster will indicate the absence of the key fob when the door is closed.

For more information on engine start-up, refer to “Starting The Engine” in “Starting And Operating.”
Warning

• Never use the PARK position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle movement and possible injury or damage.
• When exiting the vehicle, always make sure the ignition is in the OFF mode, remove the key fob from the vehicle, and lock your vehicle.
• Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to
  touch the parking brake, brake pedal, or the transmission gear selector.
• Do not leave the key fob in or near the vehicle, (or in a location accessible to children), and do not leave the ignition in the AVV or ON/RUN mode. A child could operate power windows, and other controls, or move the vehicle.
• Be sure the parking brake is fully disengaged before driving; failure to do so can lead to brake failure and a collision.
• Always fully apply the parking brake when leaving your vehicle, or it may roll and cause damage or injury. Also, be certain to leave the transmission in PARK. Failure to do so may allow the vehicle to roll and cause damage or injury.
• Driving the vehicle with the parking brake engaged, or repeated use of the parking brake to slow the vehicle may cause serious damage to the brake system.

Caution: If the Brake System Warning Light remains on with the parking brake released, a brake system malfunction is indicated. Have the brake system serviced by an authorized dealer immediately.

Starting With A Discharged Key Fob Battery
If the key fob battery is discharged, proceed as follows to start the vehicle:

1. Lift the front armrest.
2. Lay the key fob on the key fob outline found on the floor of the armrest compartment while pushing the START/STOP button to start the ignition.

Steering Wheel Lock — If Equipped
Your vehicle may be equipped with a passive electronic steering wheel lock. The steering wheel lock is engaged when the driver door is opened with the ignition OFF. The steering wheel lock releases when the ignition is cycled ON.

General Information
The following regulatory statement applies to all radio frequency (RF) devices equipped in this vehicle: This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FAQ’s