2021 Alfa Romeo Giulia Keys and Smart Key
A sophisticated Smart Key System that smoothly blends convenience and security is new for the Alfa Romeo Giulia 2021. With the help of this cutting-edge keyless entry system, drivers can easily unlock and start their Giulia by only keeping the Smart Key nearby. By preventing unwanted access, the system improves security by encrypting communication between the key fob and the car. The Smart Key System further enhances the driving experience by integrating cutting-edge technology into the regular use of this elegant and performance-focused sedan. It frequently comes with features like remote engine start, customized driver settings, and a practical hands-free trunk release.
2024 Alfa Romeo STELVIO Specs, Price, Features, Mileage and Review
KEYS
KEY FOB
Your vehicle is equipped with a key fob which supports Passive Entry, Remote Keyless Entry (RKE), Remote Start (if equipped), and remote trunk operation. The key fob allows you to lock or unlock the doors and trunk lid. The key fob does not need to be pointed at the vehicle to activate the system. The key fob also contains an emergency key, which is stored inside the key fob.
NOTE
- The key fob’s wireless signal may be blocked if the key fob is located next to a mobile phone, laptop, or other electronic device. This may result in poor performance.
- With the ignition in the ON position and the vehicle moving at 2 mph (4 km/h), all RKE commands are disabled.
In case the ignition switch does not change with the push of a button, the key fob may have a low or fully depleted battery. A low-key fob battery can be verified by referring to the instrument cluster, which will display directions to follow.
To Lock/Unlock The Doors And Trunk
Push and release the unlock button on the key fob once to unlock the driver’s door, or twice within five seconds to unlock all the doors and the trunk lid. To lock all the doors and the trunk lid, push the lock button once. If the trunk lid is open when the lock button is pushed, the trunk lid will lock when it is closed. The current unlock setting can be changed through the radio system menu so that the system unlocks:
- All doors on the first push of the key fob unlock button.
- The driver’s door on the first push of the key fob unlock button.
When the doors are locked/unlocked, the turn signals will flash and the illuminated entry system will be activated.
NOTE: If one or more doors are open when the lock button is pushed, or the trunk lid is open, the doors will lock. The doors will unlock again automatically if the key is left inside the passenger compartment, otherwise, the doors will stay locked. Flashing of the turn signals upon locking/unlocking the doors and activation of the courtesy light upon unlocking the doors can be activated or deactivated through the radio system. For further information, refer to the Information and Entertainment System Owner’s Manual Supplement.
Trunk Lid Opening
Rapidly push the trunk lid key fob button twice to open the trunk lid. The turn signals will flash to indicate that the trunk lid has been opened.
Locking/Unlocking Doors From The Outside In An Emergency
If the battery is discharged or the key fob is inoperable, you can lock or unlock the doors from the outside by inserting the blade of the emergency key, found inside the key fob, into the door handle lock cylinder and turn the emergency key as follows.
- Lock — Turn the emergency key to the right (clockwise)
- Unlock — Turn the emergency key to the left (counterclockwise)
Replacing The Battery In The Key Fob
The recommended replacement battery is one CR2032 battery.
NOTE
- Customers are recommended to use a battery obtained from Mopar®. Aftermarket coin battery dimensions may not meet the original OEM coin battery dimensions.
- Perchlorate Material — special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate for further information.
- Do not touch the battery terminals that are on the back housing or the printed circuit board.
To replace the battery, proceed as follows:
- Push the sides of the key fob inward and extract the cover pulling downwards.
- Remove the emergency key from its housing.
- Remove the battery plug by rotating it counterclockwise.
- Remove the battery from its slot and replace it with a new one. When replacing the battery, match the (+) sign on the battery to the (+) sign on the inside of the battery clip, located on the back cover. Avoid touching the new battery with your fingers. Skin oils may cause battery deterioration. If you touch a battery, clean it with rubbing alcohol.
Proceed in reverse order to reassemble the key fob.
WARNING
- The integrated key fob contains a coin cell battery. Do not ingest the battery; there is a chemical burn hazard. If the coin cell battery is swallowed, it can cause severe internal burns in just two hours and can lead to death.
- If you think a battery may have been swallowed or placed inside any part of the body, seek immediate medical attention.
- Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children.
CAUTION: The battery replacement operation must be done with care, in order not to damage the electronic key.
Programming And Requesting Additional Key Fobs
Programming the key fob may be performed by an authorized dealer.
NOTE
- Once a key fob is programmed to a vehicle, it cannot be repurposed and reprogrammed to another vehicle.
- Only key fobs that are programmed to the vehicle electronics can be used to start and operate the vehicle. Once a key fob is programmed to a vehicle, it cannot be programmed to any other vehicle.
WARNING
- Always remove the key fobs from the vehicle and lock all doors when leaving the vehicle unattended.
- Always remember to place the ignition in the OFF position.
Duplication of key fobs may be performed at an authorized dealer. This procedure consists of programming a blank key fob to the vehicle electronics. A blank key fob has never been programmed.
NOTE
- When having the Engine Immobilizer system serviced, bring all vehicle keys with you to an authorized dealer.
- For Quadrifoglio models, if you need a replacement key fob, contact an authorized dealer.
ENGINE IMMOBILIZER SYSTEM
The Engine Immobilizer system prevents unauthorized vehicle operation by disabling the engine. The system does not need to be armed or activated. Operation is automatic, regardless of whether the vehicle is locked or unlocked. The system uses a key fob, keyless push-button ignition and a Radio Frequency (RF) receiver to prevent unauthorized vehicle operation. Therefore, only key fobs that are programmed to the vehicle can be used to start and operate the vehicle. The system will shut the engine off in two seconds if an invalid key fob is used to start the engine. After placing the ignition switch in the ON/RUN position, the Vehicle Security Light will turn on for three seconds for a bulb check. If the light remains on after the bulb check, it indicates that there is a problem with the electronics. In addition, if the light begins to flash after the bulb check, it indicates that someone used an invalid key fob to start the engine. Either of these conditions will result in the engine being shut off after two seconds. If the Vehicle Security Light turns on during normal vehicle operation (vehicle running for longer than 10 seconds), it indicates that there is a fault in the electronics. Should this occur, have the vehicle serviced as soon as possible by an authorized dealer.
CAUTION: The Engine Immobilizer system is not compatible with some aftermarket remote starting systems. Use of these systems may result in vehicle starting problems and loss of security protection. All of the key fobs provided with your new vehicle have been programmed to the vehicle electronics.
KEYLESS PUSH-BUTTON IGNITION
This feature allows the driver to operate the ignition switch with the push of a button as long as the key fob is in the passenger compartment. The START/STOP ignition button has several operating modes. These modes are OFF, ACC, and ON/RUN.
The push-button ignition can be placed in the following modes:
- OFF
- The engine is stopped
- Steering is locked
- Some electrical devices (e.g. central locking, alarm, etc.) are still available
- ACC
- The engine is not started
- Some electrical devices are available (e.g. power windows)
- ON/RUN
- The engine will start (when the foot is on the brake pedal)
- All the electrical devices are available (e.g. climate controls, etc.)
If the ignition switch does not change the mode by pushing the button, the key fob may have a low or depleted battery. In this situation, a backup method can be used to operate the ignition switch.
Proceed as follows:
- Lift the front armrest.
- Lay the key fob on the indicated spot in the bottom of the centre console, positioning the key fob as shown in the following image, while pushing the START/STOP ignition button to start the ignition.
NOTE
- With the keyless ignition in the ACC position, if 30 minutes pass with the gear selector in PARK and the engine off, the ignition will automatically reset to the OFF position.
- When opening the driver’s door with the ignition in the ACC position (engine not running), a chime will sound to remind you to place the ignition in the OFF position. In addition to the chime, the message will display “Ignition Or Accessory On” in the cluster.
WARNING
- When exiting the vehicle, always make sure the ignition is in the OFF position, remove the key fob from the vehicle, and lock your vehicle.
- Never leave children alone in a vehicle, or with access to an unlocked vehicle.
- Allowing children to be in a vehicle unattended is dangerous for several reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking brake, brake pedal, or the gear selector.
- Do not leave the key fob in or near the vehicle, or in a location accessible to children, and do not leave the keyless push button ignition in the ON/RUN position. A child could operate power windows, and other controls, or move the vehicle.
- Do not leave children or animals inside parked vehicles in hot weather. Interior heat buildup may cause serious injury or death.
CAUTION: An unlocked vehicle is an invitation for thieves. Always remove the key fob from the vehicle and lock all doors when leaving the vehicle unattended.
FAQ
The Giulia often comes with two key fobs, allowing for convenience and providing a backup in case one is lost or damaged.
The key fob is used for remote keyless entry, locking and unlocking the doors, and starting the engine.
Programming additional key fobs is often a task best performed by an authorized Alfa Romeo dealership to ensure proper synchronization and security.
To lock or unlock the doors, simply approach the vehicle with the key fob in your possession. The doors will automatically lock when you walk away and unlock when you approach the car.