2021 Alfa Romeo Stelvio Keys and Smart Key
In the 2021 Alfa Romeo Stelvio, standard keys and smart key technology work together in a smart way to make driving a modern car more convenient and safe. The Stelvio goes beyond traditional key systems by using cutting-edge smart key technology. This changes how the driver and the car communicate. The smart key is seamlessly built into the design of the car. It allows keyless entry and starting, so drivers don’t have to touch the key to open the doors, start the engine, or drive away. This cutting-edge technology can tell when the key is there, making it easy for the driver to connect with the car. Even though the Stelvio is a mix of cutting-edge technology and traditional craftsmanship, it still has a real key as a symbol of its history. This makes it a harmonious blend of custom and progress. Alfa Romeo keeps improving the driving experience, and the keys and smart key system in the 2021 Stelvio show how serious the brand is about combining speed, style, and convenience into a single work of art.
Keys and Smart Key
KEY FOB
Your vehicle is equipped with a key fob which supports Passive Entry, Remote Keyless Entry
(RKE), Remote Start (if equipped), and remote liftgate operation. The key fob allows you to lock or unlock the doors and liftgate. The key fob does not need to be pointed at the vehicle to activate the system. The key fob also contains an emergency key, which is stored inside the key fob.
NOTE
- The the key fob is located next to a mobile phone, laptop, or other electronic device. This may result in poor performance.
- With ignition in the ON position and the vehicle moving at 2 mph (4 km/h), all RKE commands are disabled.
Key Fob
In case the ignition switch does not change with the push of a button, the key fob may have a low or fully depleted battery. A low key fob battery can be verified by referring to the instrument cluster, which will display directions to follow
To Lock/Unlock The Doors And Liftgate
Push and release the unlock button on the key fob once to unlock the driver’s door or twice within one second to unlock all doors and the liftgate. To lock all the doors and the liftgate, push the lock button once.
The current unlock setting can be changed through the radio system menu, so that the system unlocks:
- All doors on the first push of the key fob unlock button.
- The driver door on the first push of the key fob unlock button.
- The liftgate “independently” or “with doors”.
When the doors are locked/unlocked, the turn signals will flash and the illuminated entry system will be activated.
NOTE
If one or more doors are open when the lock button is pushed, or the liftgate is open, the doors will lock. The doors will unlock again automati-cally if the key is left inside the passenger compartment, otherwise the doors will stay locked.
Flashing of the turn signals upon locking/unlocking the doors, and activation of the courtesy light upon unlocking the doors, can be activated or deactivated through the radio system. For further information, refer to the Information and Entertainment System Owner’s Manual Supplement.
Opening The Liftgate
Rapidly push the button on the key fob twice to open the liftgate. The turn signals will flash to indicate that the liftgate has been opened.
Replacing The Battery In The Key Fob
The recommended replacement battery is one CR2032 battery.
NOTE
- Customers are recommended to use a battery obtained from Mopar®. Aftermarket coin battery dimensions may not meet the original OEM coin battery dimensions.
- Perchlorate Material — special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate for further information.
- Do not touch the battery terminals that are on the back housing or the printed circuit board.
To replace the battery, proceed as follows:
- Push the sides of the key fob inward and extract the cover pulling downwards.
Key Fob Cover Removal - Remove the emergency key from its housing.
Removing Emergency Ke - Remove the battery plug by rotating it counterclockwise.
Removing Battery Plug - Remove the battery from its slot and replace it with a new one. When replacing the battery, match the (+) sign on the battery to the (+) sign on the inside of the battery clip, located on the back cover. Avoid touching the new battery with your fingers. Skin oils may cause battery deterioration. If you touch a battery, clean it with rubbing alcohol.
Battery Location
Proceed in reverse order to reassemble the key.
WARNING
- The integrated key fob contains a coin cell battery. Do not ingest the battery; there is a chemical burn hazard. If the coin cell battery is swallowed, it can cause severe internal burns in just two hours and can lead to death.
- If you think a battery may have been swallowed or placed inside any part of the body, seek immediate medical attention.
- Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children.
CAUTION
The battery replacement operation must be done with care, in order not to damage the electronic key.
Programming And Requesting Additional Key Fobs
Programming the key fob may be performed by an authorized dealer.
NOTE
- Once a key fob is programmed to a vehicle, it cannot be repurposed and reprogrammed to another vehicle.
- Only key fobs that are programmed to the vehicle electronics can be used to start and operate the vehicle. Once a key fob is programmed to a vehicle, it cannot be programmed to any other vehicle.
WARNING
- Always remove the key fobs from the vehicle and lock all doors when leaving the vehicle unattended.
- Always remember to place the ignition in the OFF position.
Duplication of key fobs may be performed at an authorized dealer. This procedure consists of programming a blank key fob to the vehicle electronics. A blank key fob is one that has never been programmed.
NOTE
- When having the Engine Immobilizer system serviced, bring all vehicle keys with you to an authorized dealer.
- For Quadrifoglio models, if you need a replacement key fob, contact an authorized dealer.
FAQs
The Alfa Romeo Stelvio of 2021 employs a smart key with push-button ignition and keyless entry capabilities.
Is question number two. Simply go up to the car and push the button on the door handle while holding the smart key in your hand to unlock the doors. The doors will open themselves.
You can start the engine without turning on the ignition by depressing the brake pedal and then pressing the start button while the smart key is inside the car.
Usually, a dashboard warning message will show up if the smart key battery is low. By inserting the key into the designated spot on the center console for a passive start, you can still operate the vehicle.
The battery compartment can typically be accessed via the key blade that is typically removable from smart keys. To replace the battery with the proper kind, carefully open the compartment using the key blade.
Is it possible for me to program extra smart keys myself in response to Question 6? Additional smart keys must typically be programmed by a certified automobile locksmith or an authorized Alfa Romeo dealer.
is question number seven. If your smart key is lost, get in touch with a certified Alfa Romeo dealer right once to have a replacement key programmed.
Typically, the settings menu on the car can be used to enable or disable the keyless entry feature. The owner’s handbook should be consulted for detailed instructions.
Yes, the majority of smart key fobs come with a secret emergency key that can be removed. In the event that the battery dies, you can manually unlock the door using this key.
The smart key cannot be locked inside the car because of the system’s architecture. The doors normally won’t lock if the key is discovered inside the car.
While it is feasible to replace the smart key’s battery on your own, it is advised to hire a professional to do it in order to prevent programming errors or damage to the key
The smart key’s range for keyless entry can vary, but in general, it is between a few feet and several yards away from the vehicle.
Yes, you can program many keyless entry systems so that they only unlock the driver’s door or all doors when you approach.
Is question number 14. Replace the smart key batteries, confirm that you are within the key’s range, or have the key inspected for flaws if it is not being recognized
In some circumstances, you can apply enough pressure to the start button with the smart key to allow the ignition system to detect the key and start the car. This might not, however, always be effective.
Useful Links
View Full PDF:2021 Alfa Romeo Stelvio Owner’s Manual | Auto User Guide
2021 Alfa Romeo Stelvio Indicator Lights