2023 Alfa Romeo Stelvio Engine Oil and Fluids
Thanks to the 2023 Alfa Romeo Stelvio Engine Oil and Fluids, welcome to the progression of automotive perfection. This powerful SUV was expertly crafted, and its innovative heart ensures top performance and durability. The Stelvio’s powerful systems require only the best engine oil and fluids to keep them operating properly because it was meticulously engineered for precision. Maintaining top performance has never been simpler thanks to cutting-edge technology and superior engineering. In the 2023 Alfa Romeo Stelvio, enjoy a seamless fusion of style, power, and functionality, where every drop of oil and fluid adds to an unmatched driving experience. The advanced engine oil and water management system in the 2023 Alfa Romeo Stelvio shows how much care and attention to detail went into making it. This method shows how much Alfa Romeo cares about the health and efficiency of its engines. The engine oil and fluids in the Stelvio are made to meet the exacting needs of modern engines. They provide the best lubrication and cooling to improve speed and extend the life of the engine. The car has smart sensors and lights that check the amount and quality of fluids and let the driver know right away if there might be a problem. Engine oil, coolant, brake fluid, and other important fluids need to be checked and maintained regularly to keep the Stelvio running well and reliably.
Engine Oil and Fluids
ENGINE OIL
The engine oil level can be seen on the instrument cluster display every time the engine is started, or on the Information and Entertainment system display by activating on the main menu (MENU button) the following functions in sequence:
- “Vehicle Information”
- “Engine Oil”
Check that the oil level is between the MIN and MAX level on the instrument cluster display using the 6 notches shown. 1 notch displays the MIN level and 6 notches displays the MAX level.
NOTE
Use care when filling under hood fluids such as engine oil, windshield washer fluid, antifreeze etc. to minimize spillage onto top of engine. Any excess fluid that is spilled onto the top of the engine should be removed using compressed air or absorbent cloth.
If the oil level is close to or below the MIN mark, add oil gradually through the filler, (refer to
“Top-Up And Oil Level Indication Update On Display” in this section) considering that each notch shown on the display corresponds to approximately 8.8 floz (250 ml).
The oil level can also be checked manually on 2.9L Quadrifoglio models.
CAUTION
Make sure not to add too much oil when topping off the engine. Engine oil in excess may damage the engine. Have the vehicle checked. Never exceed the MAX level when topping off engine oil. It is advisable to check the oil level in intermediate steps using the oil dipstick (2.9L Quadrifoglio Only).
CAUTION
The oil level is not refreshed immediately on the display after topping off. Consequently, wait for the oil level to be refreshed on the display and follow the procedure below.
NOTE
Always reinstall the oil cap and tighten to proper torque whenever it is removed to add oil to engine. Never run the engine with cap removed as this could cause oil to leak from engine.
Manual Oil Level Checking Procedure — 2.9L Quadrifoglio
Check that the oil level is between the MIN and MAX marks on dipstick, clean it with a lint-free cloth and reinsert it. Extract the dipstick again and check that the level is between the MIN and MAX marks.
Top-Up And Oil Level Indication Update On Display — 2.9L Quadrifoglio
If an engine oil top-off is needed, in order to ensure the correct indication of the oil level on the display, proceed with the following process:
- Leave the car on flat ground with the engine running for approximately five minutes (temperature higher than 198°F (90°C) and shut the engine off.
- Wait for five minutes, turn the ignition to the ACC mode without starting the engine and wait for a few seconds.
NOTE
If the level indication is not updated after the previously described procedure, repeat the engine adjustment, shut the engine off and wait another five minutes before starting it again. If the indication is not updated after the second start, contact an authorized dealer.
Top-Up And Oil Level Indication Update On Display — 2.0L
If an engine oil top-off is needed, in order to ensure the correct indication of the oil level on the display, proceed with the following process:
- Leave the car on flat ground with the engine running for approximately five minutes (temperature higher than 176°F (80°C) and shut the engine off.
- Start the engine again and idle it for about two minutes.
NOTE
If you have added the specified amount of oil and the indicator is not reading “Full”, please contact an authorized dealer.
WARNING
If the engine oil is being topped up, wait for the engine to cool down before loosening the filler cap, particularly for vehicles with aluminum cap (if equipped). WARNING: risk of burns!
CAUTION
The oil level must never exceed the MAX mark.
If the MAX mark is exceeded (last notch on the right turns red) after the fill-up, go to an authorized dealer as soon as possible to have the oil in excess removed.
Do not add oil with specifications different from those of the oil already in the engine.
Used engine oil and oil filters contain substances which are harmful to the environment. To change the oil and filters, we advise you to contact an authorized dealer.
ENGINE COOLANT FLUID
If the level is too low, unscrew the cap of the reservoir and add the fluid described
WASHER FLUID FOR WINDSHIELD/ HEADLIGHTS
The windshield and headlight (if equipped) washer fluid reservoir is equipped with a telescopic filler neck.
If the level is too low, remove reservoir cap and lift the filler neck. Then, add the fluid described page 252. After filling the reservoir, lower the filler neck and install the reservoir cap until you hear it click.
NOTE
Use care when filling under hood fluids such as engine oil, windshield washer fluid, antifreeze etc. to minimize spillage onto top of engine. Any excess fluid that is spilled onto the top of the engine should be removed using compressed air or absorbent cloth.
NOTE
The headlight washers are activated every 10 activations of the windshield washer.
NOTE
The headlight washing system will not work if the liquid level is low (situation indicated by the symbol on the instrument cluster display On vehicles equipped with headlight washers, there is a reference notch on the dipstick: ONLY the windshield/rear window washer operates with the level below this reference.
BRAKE FLUID
Check that the fluid is at the maximum level. If the fluid level in the tank is low, contact an authorized dealer to have the system checked.
FAQs
The owner’s handbook specifies that the 2023 Alfa Romeo Stelvio needs synthetic engine oil with a viscosity grade of 5W-30 or 5W-40.
Alfa Romeo advises doing so every 7,500 to 10,000 kilometers, or once every 12 months, whichever comes first.
Synthetic oil is advised since it offers the engine superior performance and protection, especially in high-performance cars like the Stelvio.
To guarantee optimum lubrication and prevent any potential harm to engine performance and fuel efficiency, it is advisable to adhere to the specified viscosity grade.
Park the car on a flat surface, let the oil settle for a few minutes, and then check the oil level using the oil dipstick. For comprehensive instructions, consult the owner’s handbook.
A high-quality, ethylene glycol-based coolant/antifreeze that complies with Alfa Romeo’s requirements should be used in your Stelvio. Typically, this means mixing it 50/50 with distilled water.
Alfa Romeo advises doing so every four years or 60,000 miles, and then every two years or 30,000 miles after that.
Water by itself should not be used as a coolant replacement since it lacks the requisite corrosion protection and can freeze in cold weather.
Alfa Romeo transmission fluid is made to last, but it’s still a good idea to check it regularly and adhere to the owner’s manual’s recommended intervals.
The Stelvio can tow, although doing so may put more strain on the transmission and engine. If you often tow big loads, think about scheduling more frequent oil changes.
The Stelvio normally uses automatic transmission fluid (ATF) as power steering fluid; however, the precise ATF type should be confirmed in the owner’s handbook.
Brake fluid needs to be changed every two years to ensure optimal braking system operation and prevent moisture buildup.
Brake fluid should be replaced every 2 years to ensure proper brake system function and prevent moisture buildup.
Check your vehicle’s owner’s manual or go to an authorized Alfa Romeo service manual for information on fluid capacities.
Using genuine Alfa Romeo fluids is advised to ensure the best performance and compatibility with your vehicle’s systems, even though some aftermarket fluids may fulfill standards.
Useful Links
View Full PDF: 2023 Alfa Romeo Stelvio User Guide | Auto User Guide
2023 Alfa Romeo Stelvio Maintenance Schedule