2024 Alfa Romeo Tonale Seats and Seat Belt Owner’s Manual
The 2024 Alfa Romeo Tonale envelops passengers in luxury with its exquisitely designed ergonomic seats, which are engineered for both comfort and support. Modern seat belt systems that are designed for safety and blend in perfectly with the car’s svelte interior decor enhance this sensation.
2024 Alfa Romeo TONALE Specs, Price, Features, Mileage And Review
Alfa Romeo SEATS Guide
Seats are a part of the Occupant Restraint system of the vehicle.
WARNING!
- It is dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed.
- Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. In a collision, people riding in these areas are more likely to be seriously injured or killed.
- Be sure everyone in your vehicle is in a seat and using a seat belt properly.
MANUAL ADJUSTMENT FRONT SEATS — IF EQUIPPED
Manual Seat Adjustment
- Forward/Rearward Adjustment Bar
- Height Adjustment Lever
- Recline Adjustment Lever
- Power Lumbar Adjustment (If Equipped)
Manual Front Seat Forward/Rearward Adjustment
Some models may be equipped with manual front seats. The seats can be adjusted forward or rearward by using a bar located by the front of the seat cushion, near the floor.
While sitting in the seat, lift the bar and move the seat forward or rearward. Release the bar once you have reached the desired position. Then, using body pressure, move forward and rearward on the seat to be sure that the seat adjusters have latched.
WARNING!
- Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death.
- Seats should be adjusted before fastening the seat belts and while the vehicle is parked. Serious injury or death could result from a poorly adjusted seat belt.
Manual Seat Height Adjustment — If Equipped
The driver’s seat height can be raised or lowered by using a lever, located on the outboard side of the seat. Pull upward on the lever to raise the seat height or push downward on the lever to lower the seat height.
Manual Front Seat Recline Adjustment
To adjust the seatback, lift the lever located on the outboard side of the seat, lean back to the desired position and release the lever. To return the seatback, lift the lever, lean forward and release the lever.
WARNING!
Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision, you could slide under the seat belt, which could result in serious injury or death.
MANUAL ADJUSTMENT REAR SEATS
WARNING!
Do not pile luggage or cargo higher than the top of the seatback. This could impair visibility or become a dangerous projectile in a sudden stop or collision.
60/40 Split Folding Rear Seat With Fold- Flat Feature
To provide an additional storage area, each rear seat can be folded flat. This allows for extended cargo space and still maintains some rear seating room.
NOTE:
Before folding the rear seat, it may be necessary to position the front seat to its mid-track position. Also, be sure that the front seats are fully upright and positioned forward. This will allow the rear seat to fold down easily.
WARNING!
- It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed.
- Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts.
- Be sure everyone in your vehicle is in a seat and using a seat belt properly.
TO LOWER THE REAR SEAT
- Pull the seatback release lever located on either side of the upper outer edge of the seat.
- Fold that side of the rear seatback completely forward.
TO RAISE THE REAR SEAT
NOTE:
If interference from the cargo area prevents the seatback from fully locking, you will have difficulty returning the seat to its proper position.
Raise the seatback and lock it into place.
The release lever will show a red indicator while in the unlocked position. Once the seat is locked in, the red indicator will no longer be visible.
WARNING!
Be certain that the seatback is securely locked into position. If the seatback is not securely locked into position the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious injury.
POWER ADJUSTMENT FRONT SEATS
Some models may be equipped with a power driver’s seat and/or power passenger seat. The power seat switch and power seat recliner switch are located on the outboard side of the seat near the floor. Use the power seat switch to adjust seat height, angle, or forward/rearward position. Use the power seat recline switch to adjust the angle of the seatback.
Power Seat Switches
- Power Seat Switch
- Power Recline Switch
Forward Or Rearward Adjustment
The seat can be adjusted both forward and rearward. Push the seat switch forward or rearward, and the seat will move in the direction of the switch. Release the switch when the desired position has been reached.
Height Adjustment
The height of the seats can be adjusted up or down. Pull upward or push downward on the seat switch, the seat will move in the direction of the switch. Release the switch when the desired position is reached.
Tilt Adjustment
The angle of the seat cushion can be adjusted up or down. Pull upward or push downward on the front of the seat switch and the front of the seat cushion will move in the direction of the switch.
Reclining The Seatback Forward Or Rearward
The seatback can be reclined both forward and rearward. Push the seat recliner switch forward or rearward. The seatback will move in the direction of the switch. Release the switch when the desired position has been reached.
WARNING!
Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision, you could slide under the seat belt, which could result in serious injury or death.
Power Lumbar — If Equipped
Vehicles equipped with power drivers or passenger seats may be equipped with power lumbar. The power lumbar switch is located on the outboard side of the power seat. Push the switch forward to increase the lumbar support. Push the switch rearward to decrease the lumbar support. Pushing upward or downward on the switch will raise and lower the position of the support.
FRONT HEATED SEATS — IF EQUIPPED
WARNING!
- Persons who are unable to feel pain in the
skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion or other physical conditions must exercise care when using the seat heater. It may cause burns even at low temperatures, especially if used for long periods. - Do not place anything on the seat or seatback that insulates against heat, such as a blanket or cushion. This may cause the seat heater
to overheat. Sitting in a seat that has been overheated could cause serious burns due to the increased surface temperature of the seat.
The front heated seat control buttons are located within the Uconnect system. You can gain access to the control buttons through the climate or controls screen.
- Press the heated seat button once to turn the HI setting on.
- Press the heated seat button a second time to turn the MED setting on.
- Press the heated seat button a third time to turn the LO setting on.
- Press the heated seat button a fourth time to turn the heating elements off.
If the HI level setting is selected, the system will automatically switch to a lower level after approximately 15 minutes (depending on environmental conditions) of continuous operation. The heated seat feature will then turn off automatically approximately 45 minutes after switching to a lower level.
NOTE:
The engine must be running for the heated seats to operate.
For information on use with the Remote Start system,
See page 39.
FRONT VENTILATED SEATS — IF EQUIPPED
Located in the seat cushion and seat back are fans that draw the air from the passenger compartment and move air through fine perforations in the seat cover to help keep the driver and front passenger cooler in higher ambient temperatures. The fans operate at three speeds: HI, MED, and LO.
The front ventilated seat control buttons are located within the Uconnect system. You can gain access to the control buttons through the climate screen or the controls screen.
- Press the ventilated seat button once to choose HI.
- Press the ventilated seat button a second time to choose MED.
- Press the ventilated seat button a third time to choose LO.
- Press the ventilated seat button a fourth time to turn the ventilated seat off.
NOTE:
The engine must be running for the ventilated seats to operate.
For information on use with the Remote Start system,
See page 39.
REAR SEAT ARMREST — IF EQUIPPED
The centre part of the rear seat can also be used as a rear armrest with cup holders, pull the rear armrest strap to release it from the seat and pull forward.
WARNING!
Be certain that the seatback is securely locked into position. If the seatback is not securely locked into position the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious injury.
HEAD RESTRAINTS
Head restraints are designed to reduce the risk of injury by restricting head movement in the event of a rear impact. Head restraints should be adjusted so that the top of the head restraint is located above the top of your ear.
WARNING!
- All occupants, including the driver, should not operate a vehicle or sit in a vehicle’s seat until the
WARNING!
head restraints are placed in their proper positions to minimize the risk of neck injury in the event of a crash.
- Head restraints should never be adjusted while the vehicle is in motion. Driving a vehicle with head restraints improperly adjusted or removed could cause serious injury or death in the event of a collision.
NOTE:
Do not reverse the head restraints (making the rear of the head restraint face forward) in an attempt to gain additional clearance to the back of your head.
2024 Alfa Romeo TONALE Specs, Price, Features, Mileage And Review
Front Head Restraint Adjustment
Your vehicle is equipped with front two-way driver and passenger head restraints.
To raise the head restraint, pull upward on the
head restraint. To lower the head restraint, push the adjustment button, located at the base of the head restraint, and push downward on the head restraint.
Head Restraint Adjustment
- Release Button
- Adjustment Button
WARNING!
- All occupants, including the driver, should not operate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions to minimize the risk of neck injury in the event of a crash.
- Head restraints should never be adjusted while the vehicle is in motion. Driving a vehicle with head restraints improperly adjusted or removed could cause serious injury or death in the event of a collision.
Rear Head Restraint Adjustment
The rear outboard head restraints can be adjusted up or down.
To raise the outboard head restraint, pull upward on the head restraint. To lower the head restraint, push the adjustment button, located at the base of the head restraint, and push downward on the head restraint.
WARNING!
ALL the head restraints MUST be reinstalled in the vehicle to properly protect the occupants.
Head Restraint Removal
To remove the front head restraints, proceed as follows:
- Raise the head restraint to its maximum height.
- Push the adjustment button and the release button at the side of the two supports at the same time.
- Pull upward on the head restraint to fully remove it.
To reinstall the head restraints, proceed as follows:
- Hold down both the adjustment button and release button while placing the head restraint posts into the holes.
- Then, reposition the head restraint to the appropriate height for the passengers.
- Replace the seatback to the appropriate position for passengers.
NOTE:
- The rear outboard head restraints may be removed by inserting a pointed object such as a pen into the release button location. Follow the preceding front head restraints instructions for removal steps.
- The rear centre head restraint is fixed and is not adjustable or removable.
WARNING!
- A loose head restraint thrown forward in a collision or hard stop could cause serious injury or death to occupants of the vehicle. Always securely stow removed head restraints in a location outside the occupant compartment.
- ALL the head restraints MUST be reinstalled in the vehicle to properly protect the occupants. Follow the preceding reinstallation instructions before operating the vehicle or occupying a seat.
FAQs
The 2024 Alfa Romeo Tonale features premium leather-upholstered seats as standard, with the option for customizable trim levels.
The seats in the 2024 Tonale are fully adjustable, offering personalized comfort for drivers and passengers.
The Tonale offers a standard 5-seat configuration, with options for folding rear seats to accommodate additional cargo space.
The Tonale comes with available heated seats for enhanced comfort during colder weather.
The Tonale offers ventilated seats as an optional feature for added comfort in warmer climates.
The Tonale provides optional memory seats, allowing drivers to store preferred seating positions for convenience.
The seat belts in the 2024 Tonale are made of durable, high-quality fabric for maximum safety and reliability.
The Tonale is equipped with seat belt pretensioners, which automatically tighten the seat belts in the event of a collision for added safety.
The seats in the Tonale feature adjustable headrests to provide personalized support and comfort.
The seats in the Tonale are ergonomically designed to provide optimal support and comfort, even during extended periods of driving.
The seats in the 2024 Tonale include advanced safety features such as side-impact airbags and reinforced seat structures to enhance occupant protection.
The rear seats of the Tonale can be folded flat to create additional cargo space, providing versatility for transporting larger items.
The Tonale offers optional lumbar support for the seats, allowing drivers and passengers to adjust for optimal comfort and posture.
The seats in the Tonale are engineered with ergonomic features and supportive cushioning to reduce fatigue and enhance comfort on extended journeys.
The Tonale is equipped with child seat anchor points, making it easy to securely install compatible child safety seats.