Alfa Romeo Giulia 2022 Display

The 2022 Alfa Romeo Giulia is at the center of innovation. It has a beautiful and sophisticated display that blends technology and elegance in a seamless way. The infotainment display, which is the heart of the dashboard, grabs your attention with its bright, touch-sensitive interface. With a big, easy-to-use touchscreen, the display is the hub for controlling a wide range of tasks, from entertainment and navigation to connecting to other devices and setting up the car. Integration with a smartphone, voice controls, and real-time traffic information make sure that driving is smooth and linked. As a true combination of form and function, the Giulia’s display shows how committed Alfa Romeo is to providing both performance and cutting-edge technology that improves the driving experience with every touch and interaction.

INSTRUMENT CLUSTER DISPLAY

INSTRUMENT CLUSTER DISPLAY DESCRIPTION
This vehicle is equipped with a driver interactive display that is located in the instrument cluster. When one or more of the doors have been opened or closed and the ignition is in the OFF position, the instrument cluster will display the vehicle mileage for a few seconds.

RECONFIGURABLE INSTRUMENT CLUSTER DISPLAY
During operation, the instrument cluster display is divided into multiple sections which show driving data, warnings and failure indications.

RECONFIGURABLE DISPLAY ITEMS

1. External Lights (Low Beam/High Beam) Display
2. Front, Side Anti-Collision Systems, Cruise Control Change Information
3. Speed Limiter Display
4. Driving Assistance Systems (Forward Collision Warning (FCW), Lane Departure Warning (LDW), Highway Assist System (HAS)) Information Display
5. Adaptive Cruise Control (ACC) / Cruise Control (CC) Information Display
6. Traffic Sign Information (TSI) / Speed Limiter Information Display
7. Traffic Sign Information (TSI) Information Display
8. Time
9. External Temperature
10. Main Display: Vehicle Speed Display, Trip Computer Information, etc. The screens can be selected, on rotation, by pushing the MENU selection button on the windshield wiper stalk.

Depending on the driving mode chosen using  the Alfa DNA (Dynamic, Natural, and Advanced Efficiency) the screens can be graphically different. Navigation instructions and call information can be set and displayed in the Information and Entertainment System.
Home
The parameters shown on the display, for the modes: Dynamic, Natural and Advanced Efficiency  are:

• Time
• External Temperature
• Current speed (shown only if the repeat mode of the “Navigation” and “Phone” functions have not been previously activated).
• Range In RACE mode (if equipped) the consumption indication index is not active and a sports gear shift indicator is displayed.

1. Time
2. Temperature
3. Distance To Empty
4. Speed

Trip A And B
For all driving modes (Dynamic, Natural, and Advanced Efficiency) and with the ignition device ON, the Trip computer can be used to display the measurements regarding the operating state of the vehicle. This function is characterized by two separate records, called Trip A and Trip B (the latter can be deactivated by the Information and Entertainment System), where the complete journeys are recorded in a reciprocally independent manner. Trip A and Trip B are used to display the values relating to:

1. Distance traveled
2. Average fuel consumption
3. Average speed
4. Active trip
5. Fuel consumption indicator
6. To reset the values, press and hold down the button on the windshield wiper stalk.
7. Performance
   The displayed parameters differ according to the active mode. The modes that can be selected using the Alfa DNA system are: NaturalThe screen graphically reproduces some parameters closely linked to the efficiency of the driving style, with a view to limiting consumption.
8. Advanced Efficiency
9. Acceleration
10. Deceleration
11. Gear Shifts

The three central icons, on the screen, indicate the effectiveness of the driving style linked to the parameters of: acceleration, deceleration and gear shift with a view to reducing fuel consumption. The graphic bar below the icons shows current consumption and the green line represents the optimal area. The globe lights up gradually according to lower consumption.
Alternative Performance
The displayed parameters vary depending on the active mode. The modes can be selected through the Alfa DNA™ system and are as follows:

Natural and Advanced Efficiency
The display graphically shows the values of:

• instantaneous consumption
• average fuel consumption (based on “Trip A”);

Below a certain speed value, when the accelerator pedal is not pressed or in the event of failure, dashes are displayed in place of the consumption value (“– –. –”).

Dynamic
The display graphically shows the values of:

• accelerator pedal position (expressed in percentage);
• brake pedal position (expressed in percentage);
• engine coolant temperature (H = hot/ C = cold).

Race (If Equipped)
The display graphically shows the values of:

• engine torque;
• turbocharger pressure;
• engine oil pressure (L = low pressure/ H= high pressure).

NOTE: The engine torque and turbocharger pressure values vary according to the engine type.

The displayed parameters are related to vehicle stability, the graphs illustrate the trend of the longitudinal/lateral accelerations (G-meter information), considering gravity acceleration as a reference unit. Lateral acceleration peaks are also indicated.

• 11. Driving Mode Display (Alfa DNA System)
• 12. Distance Traveled (miles/km) display
• 13. Fuel Consumption
• 14. Warning Indications Display (e.g. danger of ice, open doors, ABS operation, etc.)
• 15. Range

CUSTOMER PROGRAMMABLE SETTINGS

Multiple settings can be programmed by the user using the radio. This section describes only the basic settings:

• Units & Language
• Clock & Date
• Cluster

To access the settings list in the radio, proceed as follows:

1. Press the Home button to access the main menu.
2. Select Settings from the main menu using the Rotary Knob or by pressing Settings on the touchscreen
3. ON/OFF Control And Volume Knob
4. OPTION Button
5. Rotary Pad
6. Home Button

Units & Language
The following settings can be modified under the “Units & Language” menu:

• Units: select US, Metric, or Custom. The custom option allows for individual selection of the unit measures
• Language: change the language of the system
• Restore Unit & Language Settings: restores the factory settings 70 To access and change the setting, turn and push the Rotary Pad or press the desired setting on the touchscreen.

Clock & Date
The following settings can be modified under the “Clock & Date” menu:

• Sync With GPS Time (if equipped): activates or deactivates the clock synchronization through  the GPS. If the function is deactivated, the options Set Time and Set Date are enabled
• Set Time: set the time manually
• Time Format: set the time format to either a 12-hour or a 24-hour clock
• Set Date: set the date manually
• Restore Clock & Date Settings: restores the factory settings To access and change the setting, turn and push the Rotary Pad or press the desired setting on the touchscreen.

Cluster
The following settings can be modified when this mode is selected:

• Warning Buzzer Volume: set the volume of the warning buzzer on seven levels
• Trip B: activate or deactivate the Trip function
• Show Phone Info: activate/deactivate repetition of the phone function screens also on the instrument panel display
• Show Audio Info: activate/deactivate repetition of the audio function screens (Radioand Media) also on the instrument panel display
• Show Nav Info (if equipped): activate/ deactivate repetition of the navigator functionscreens also on the instrument panel display
• Digital speed on all screens: activate/deactivating of digital speed on the instrument panel display screens other than the main screen
• Consumption Bar: activate/deactivate the consumption baron the display screens of the instrument panel where it is available
• Performance pages: choose, for each driving mode, one of the two alternative contents displayed in the screen
• Custom areas: select which content to display in each of the three customizable areas on the display of the instrument panel: time, date, outside temperature, radio information, compass
• Restore Cluster Settings: deletes the current settings and restores the factory settings

To access and change the setting, turn and push the Rotary Pad or press the desired setting on the touchscreen.

FAQ