alliance RV Valor 2021 Wheel Nut Torque User Manual
The Alliance RV Valor 2021 is a luxurious fifth-wheel RV that offers various features and capabilities to enhance your travel experience. One of its critical features is the wheel nut torque specifications, which play a vital role in ensuring the safety and stability of the vehicle. Wheel nut torque refers to the amount of force required to secure the wheel to the RV. Inadequate tightening of wheel nuts could lead to wheel damage, decreased vehicle stability, and potential accidents. The Alliance RV Valor 2021 provides wheel nut torque specifications that can be found in the owner’s manual or on the tire information placard. It is crucial to follow these specifications and use a torque wrench to tighten the wheel nuts to the recommended torque before starting your journey to ensure a safe and smooth travel experience.
Wheel Nut Torque
Always use a calibrated torque wrench to confirm proper torque. Check the lug nut torque on each wheel before departure. Do NOT under torque or over torque under any circumstance. Tighten all lug nuts in the correct order according to your RVs lug pattern.
WARNING
ALWAYS TORQUE THE WHEEL LUG NUTS TO THE REQUIRED SPECIFICATIONS.
Wheel Lug Nut Torque Chart
|
LUG NUT |
STUD
DIAMETER |
RIM SIZE |
RIM TYPE |
ACCEPTABLE
TORQUE RANGE |
| 8 | 1/2″ | 16″ | Steel/Aluminum | 90‐120 ft./lbs. |
| 8 | 5/8″ | 17.5″ | Aluminum | 140‐160 ft./lbs. |
Lug nuts should be torqued in the pattern shown below:
When pulling an RV, the most obvious thing is sheer mass. You’ll be taller, wider and much heavier. Allow yourself plenty of room and time to maneuver out of potentially difficult situations. Being taller, RVs are more susceptible to sway caused by cross winds and turbulence created by other large passing vehicles. Having the correct hitch equipment that is adjusted properly can significantly reduce these effects. Know the height of your RV. This will help in avoiding overhead obstructions such as tree branches, low building overhangs and low clearance bridges or overpasses. Know the width of your RV. This is important when negotiating, turns and other obstructions. Extendable side mirrors and/or add-on tow mirrors can help.
Know how much your RV weighs and be aware of the weight ratings of the RV. This information is available for your safety. It is critical to never overload your RV. Overloading adversely affects the towing and handling of your RV. Stay within the weight ratings and limits of your RV. A tow vehicle and RV weigh a lot and can take longer to stop. Increase your following distance and give yourself plenty of room and time to stop. Practice makes perfect. Get a feel for how the RV tows and handles. Especially if you are new to RVs.
BRAKE SYSTEMS
Brake Controller
The brake controller should be installed in the tow vehicle to work in conjunction with the RV brakes. Consult with your dealer or brake controller manufacturer to decide what is the right towing combination.
alliance RV Valor 2021 Top Accessories
[amalinkspro_table id=”32452″ new-window=”on” nofollow=”on” addtocart=”off” /]
Inspecting Your Brakes
WARNING
FAILURE TO KEEP YOUR BRAKES IN PROPER WORKING CONDITION AS OUTLINED CAN CAUSE PROPERTY DAMAGE, SERIOUS INJURY OR DEATH.
Inspect for leaks and smooth operation. Clean with brake cleaner and flush with brake fluid. Check for cracks, kinks or blockages. Bleed the system to remove all air.
A simple visual inspection of your brake linings will tell you that they are usable. Replacement is necessary if the lining is worn to within 1/16” or less, or if found to be contaminated with grease, oil, or scored or gouged. Hairline heat cracks are normal in bonded linings and should not be cause for concern. When replacement is necessary, it is important to replace both shoes on each brake and both brakes on the same axle. This will help retain the balance of your brakes. Check all hardware. Check shoe return spring, hold down springs, and adjust springs for stretch or wear and have them replaced as required.
After the replacement of brake shoes and linings, the brakes must be re‐burnished to seat in the new components. This should be done by applying the brakes 20 to 30 times from an initial speed of 40mph. Slowing the vehicle to 20mph. Allow time for brakes to cool between applications. This procedure allows the brake shoes to seat into the drum surface.
Electric Drum Brakes
The electric drum brakes on your RV are similar to the drum brakes on an automobile. The basic difference is that your automotive brakes are actuated by hydraulic pressure while your electric trailer brakes are actuated by an electromagnet.
Electrical current is fed into the system by the controller, it flows through the electromagnets in the brakes. The electromagnets are energized and become magnetically attracted to the rotating armature surface of the drums which moves the actuating levers in the direction that the drums are turning. This force causes the actuating cam block at the shoe end of the lever to push the primary shoe out against the inside surface of the brake drum. The force generated by the primary shoe acting through the adjuster moves the secondary shoe out into contact with the brake drum. Increasing the current flow to the electromagnet causes the magnet to grip the armature surface of the brake more firmly. This results in increasing the pressure against the shoes and brake drums until the desired stop is accomplished.
Q&A
- What is wheel nut torque?
Wheel nut torque is the amount of force required to tighten the wheel nuts on a vehicle to secure the wheels to the vehicle. - Why is wheel nut torque important?
Wheel nut torque is important to ensure that the wheels are secured safely and appropriately. If the wheel nuts are not tightened to the manufacturer’s specified torque, it could lead to wheel damage, decreased vehicle stability, and even accidents. - Where can I find the wheel nut torque specifications for my Alliance RV Valor 2021?
The wheel nut torque specifications can be found in the owner’s manual or on the RV’s tire information placard. - What is the recommended wheel nut torque for Alliance RV Valor 2021?
The recommended wheel nut torque for Alliance RV Valor 2021 is 110-120 lb-ft. - Can I use an impact wrench to tighten the wheel nuts on my Alliance RV Valor 2021?
It’s not recommended to use an impact wrench to tighten the wheel nuts on your Alliance RV Valor 2021. Using a torque wrench is the best method to ensure that the nuts are tightened to the correct torque. - How often should I check the wheel nut torque on my Alliance RV Valor 2021?
You should check the wheel nut torque on your Alliance RV Valor 2021 before every trip and after every tire change. - What type of torque wrench should I use to tighten the wheel nuts on my Alliance RV Valor 2021?
You should use a calibrated torque wrench that meets the recommended specifications for your Alliance RV Valor 2021. - Can I over-tighten the wheel nuts on my Alliance RV Valor 2021?
Yes, over-tightening the wheel nuts can damage the wheels and potentially cause an accident. - Can I reuse the old wheel nuts on my Alliance RV Valor 2021 after a tire change?
It’s not recommended to reuse the old wheel nuts after a tire change. Always use new wheel nuts to ensure proper tightening and safety. - What should I do if I suspect a loose wheel nut on my Alliance RV Valor 2021?
If you suspect a loose wheel nut on your Alliance RV Valor 2021, stop immediately and check the torque on all the wheel nuts before continuing to drive. - How can I prevent the wheel nuts from becoming loose on my Alliance RV Valor 2021?
To prevent the wheel nuts from becoming loose, make sure to use a calibrated torque wrench to tighten the nuts to the recommended torque specification. - Can I adjust the wheel nut torque on my Alliance RV Valor 2021?
No, you should not adjust the wheel nut torque on your Alliance RV Valor 2021, as it is set to the manufacturer’s recommended specifications. - What should I do if I can’t find the wheel nut torque specifications for my Alliance RV Valor 2021?
If you can’t find the wheel nut torque specifications for your Alliance RV Valor 2021, contact the manufacturer or a qualified mechanic for assistance. - Should I check the wheel nut torque when the tires are cold or hot?
It’s recommended to check the wheel nut torque when the tires are cold, as the heat generated during driving can cause the torque to change. - Is wheel nut torque the same for all tires on my Alliance RV Valor 2021?
Yes, the wheel nut torque is the same for all tires on your Alliance RV Valor 2021.
Useful Links
View Full User Guide: alliance RV Valor 2021 User Manual
Download Manuals: https://dev.alliancerv.com/owners-manuals