2022 Audi A4 Instrument Cluster Setup Guide
Introduction
The 2022 Audi A4 Instrument Cluster invites you to “step into the future of automotive technology, where innovation meets elegance to give you an unmatched driving experience.” The instrument cluster in the 2022 Audi A4 is a dynamic digital interface that effortlessly combines information, aesthetics, and utility. It is not just a collection of gauges and dials. Audi is dedicated to safety, which is why they use such cutting-edge technology. The instrument cluster serves as a watchful co-pilot, bringing important information to your line of sight, such as speed restrictions, navigational prompts, and car alerts. The cluster makes sure that you maintain your attention on the road while easily gaining access to the information you require with its high-resolution graphics and user-friendly layout.
The 2022 Audi A4 Instrument Cluster epitomizes the brand’s commitment to creating interiors that are both practical and aesthetically appealing. It also represents a significant advancement in automotive innovation. The instrument cluster functions as a portal into the world of the Audi A4 thanks to its flawless fusion of technology and design, where driving is transformed into an engaging experience rather than just a means of transportation.
Instrument Cluster
Instrument cluster overview
Depending on the vehicle equipment, the following items may appear in the instrument cluster:
- Left dial
- Tachometer
- Tab area
- Central area Status line (one or two lines)
Right dial- Convenience display
- Display
- Fuel level 5)
- Right additional display with speedometer
- Left additional display with:
- Selector lever position
- Audi drive select mode
- Display
- Engine coolant temperature
WARNING
If there is a serious system malfunction, the display may turn off. The indicator bight may als0 turn on. Stop the vehicle safely. See an authorized Audi dealer or authorized Audi Service Facility for assistance.
Tips
- The following pages primarily show illustrations of the Audi virtual cockpit plus*. The display ,or location of the items that are shown may vary on the different versions of the instrument cluster.
- You can select the units used for temperature, speed, and other measurements Speeds are displayed in mph (miles per hour) or km/h (kilometers per hour).
- Certain instrument cluster content can also be displayed in the head-up display
Operating
Information is organized within various tabs G) in the instrument cluster. The tab contents are displayed in the central area@.
Requirement: the ignition must be switched on.
Selecting a tab
- Press the
button® repeatedly until the desired tab is selected.
Returning to functions at higher levels
Press the 
button ®·
Opening and closing the menu
- Press the button .
Selecting and confirming a function
Requirement: a menu or list must be displayed.
- To select a function, turn the left thumbwheel (J) to the desired function.
- To confirm a selection, press the left thumb- wheel (z).
Switching the view
- Press the VIEW button
Information is organized within various tabs G) in the instrument cluster. The tab contents are displayed in the central area@.
Requirement: the ignition must be switched on.
Selecting a tab
Press the button® repeatedly until the desired tab is selected.
Returning to functions at higher levels
- Press the button ®·
Opening and closing the menu
- Press the button @.
Selecting and confirming a function
Requirement: a menu or list must be displayed.
- To select a function, turn the left thumbwheel (J) to the desired function.
To confirm a selection, press the left thumb- wheel (z).
Switching the view
- Press the VIEW button
The following tabs may be available, depending on vehicle equipment:
Adjusting the display
Switching the view
Applies to: Audi virtual cockpit
Press the VIEW button to switch between the default view G) and the enhanced view@.
Adjusting the layout
Applies to: Audi virtual cockpit
Depending on the vehicle equipment, various layouts may be available.
- Applies to: MMI: Select on the home screen: SETTINGS> Display & brightness> Audi virtual cockpit.
To adjust the desired layout, press@.
Adjusting the additional display
Applies to: Audi virtual cockpit
Depending on the vehicle equipment, the additional displays that can be selected may vary.
- Applies to: MMI: Select on the home screen: SETTINGS> Display.& brightness > Audi virtual cockpit> Configure.
Select the desired additional display.
Reducing the display
Depending on the vehicle equipment, you can hide the central area in the instrument cluster.
- Select on the instrument cluster: vehicle functions tab button Reduced display, or
Press the VIEW button on the multifunction steering wheel.
Coolant temperature display
Applies to: vehicles “With a coolant temperature indicator
The coolant temperature display® only functions when the ignition is switched on. To reduce the risk of engine damage, please observe the following notes about the temperature ranges.
Cold range
If only the LEDs at the bottom of the gauge turn on, the engine has not reached operating temperature yet. Avoid high engine speeds, full acceleration, and heavy engine loads.
Normal range
The engine has reached its operating temperature once the LEDs up to the center of the gauge turn on. If the indicator light in the instrument cluster display turns on, the coolant temperature is too high .
Note
- Auxiliary bead lights and other accessories in front of the air intake impair the cooling effect of the tool ant. This increases the risk of the engine overheating during high outside temperatures and heavy engine load.
The front spoiler also helps to distribute cooling air correctly while driving. If the spoiler is damaged,, the cooling effect will be impaired and the risk of the engine overheating will increase. See an authorized Audi dealer or authorized Audi Service Facility for assistance.
Tachometer
indicator light turns on, the engine will be automatically limited to the RPM displayed in the instrument cluster. This will protect the engine components, for example during a cold start or from overheating.
indicator light also turns on. Make sure the engine speed does not go above the speed displayed, for example when downshifting. Drive to an authorized Audi dealer or authorized Audi Service Facility immediately to have the malfunction corrected.The needle in the tachometer may only be in the red area of the gauge for a short period of time before there is a risk of damaging the engine. The location where the red zone begins varies depending on the engine.
The trip odometer and odometer are displayed in the status bar©
The trip odometer shows the distance driven since it was last reset. It can be used to measure short distances. The odometer shows the total distance that the vehicle has been driven.
- Select on the instrument cluster: vehicle functions tab CT§ button Reset mi.
- Tips
Distances are displayed in mi (miles) or km (kilometers).
FAQs
To open the configuration menu, push the “Menu” button on the steering wheel, choose “Instrument Cluster,” and then “Setup.”
Using the settings menu, you can customize the information displayed. You have a variety of display options to choose from, including media, navigation, and vehicle status.
The control knob on the left side of the instrument cluster allows you to change the brightness. You can rotate it to the right to make it brighter and to the left to make it darker.
The Audi A4 of 2022 provides a variety of display themes. Through the settings menu, you may select your desired color scheme and design.
Select the sort of information you wish to display, such as turn-by-turn directions or a map overview, in the “Navigation” section of the setup menu.
Yes, you may use Bluetooth or USB to connect your smartphone and display pertinent data like incoming calls, messages, and media details.
A variety of driver aid functions and alerts that are displayed on the instrument cluster can be configured and customized using the “Driver Assistance” options.
The setup menu allows you to alter the measuring units. Miles and kilometers, as well as other units like temperature and fuel consumption, are all interchangeable.
Select the information you wish to reset in the “Vehicle” part of the configuration menu. To confirm the reset, adhere to the on-screen instructions.
The text and icon sizes are typically fixed, but you can change the instrument cluster display’s zoom level to improve visibility.
Yes, a lot of Audi models come with a “Sport” or “Dynamic” display mode that puts an emphasis on data relating to performance. For this option, look under the configuration menu.
The setup menu on the 2022 Audi A4 might allow users to customize driver profiles. Individual preferences for various drivers can be saved.
Depending on the model, Audi may offer software updates to improve the functioning or address problems with the instrument panel. For updates, visit the Audi website.
Simply press the “Menu” button on the steering wheel until you are back on the main display to leave the settings menu.
The 2022 Audi A4 owner’s manual is available to you. It gives thorough instructions and information on how the instrument cluster is set up as well as other features.
Useful Links
View Full PDF: 2022 Audi A4 Owner’s Manual
