2022 Audi A4 Lights and Wipers Operation

Introduction

The 2022 Audi A4 is a model of cutting-edge engineering in the field of automotive innovation, seamlessly fusing performance, luxury, and technology. The 2022 Audi A4 does not disappoint when it comes to its cutting-edge lighting and wiper systems, making it one of the most eagerly awaited debuts of its time. Audi’s thorough design and integration of these crucial components have raised the driving experience to unparalleled heights, setting new standards for both safety and beauty. The 2022 Audi A4 stands out due to its commitment to fusing ease and technology. The vehicle’s cutting-edge driver assistance features are smoothly linked with the lighting and wiper systems. By altering the beam angle around corners to illuminate the way before the driver even turns the steering wheel, the adaptive lighting system, for instance, works in tandem with the A4’s predictive technology. Similar to how the automatic braking system and rain-sensing wipers work together to ensure good visibility during sudden downpours and crucial driving situations.

In conclusion, the lighting and wiper systems on the 2022 Audi A4 demonstrate the company’s dedication to innovation, safety, and driving enjoyment. Modern adaptive lighting, rain-sensing wipers, and sophisticated integration with the car’s technology combine to produce a seamless driving experience that raises the bar for the auto industry. Drivers of the Audi A4 in 2022 may anticipate a journey that is not only characterized by style and performance but also by the very spirit of advancement.

Exterior lighting

Switching the lights on and off

Light switch
Turn the light switch G) to the corresponding po­sition when the ignition is switched on. The symbol and the selected position will turn on (ex­cept position 0).

0 The daytime running lights will automatically turn on. In vehicles for some markets, you can switch the automatic daytime running lights on and off in the MMI.

AUTO – The headlights will automatically adapt to the surrounding brightness.

– Parking lights
– Low beam headlights

When the low beam headlights or parking lights are switched on, the corresponding or in­dicator light will turn on depending on vehicle equipment.

All-weather lights
Requirement: the light switch must be in the AU­TO or position.
The headlights automatically adjust so that there will be less glare, for example when the road sur­face is wet.

Automatic headlight range control
Your vehicle is equipped with automatic head­light range control. It reduces glare for oncoming traffic if the vehicle load changes. The headlight range adjusts automatically.

Audi adaptive light
Applies to: vehicles with Audi adaptive tight
Audi adaptive light provides better visibility when driving in the dark. The lights are adapted to the road conditions based on speed, such as when driving on expressways, rural roads, at intersections, and around curves. The adaptive lights only function when the Light switch is in the AUTO po­sition and the all-weather lights are switched off.

WARNING

1. Observe the safety precautions and note the limits of the assist systems, sensors, and cameras.
2. Automatic headlights are only intended to assist the driver. The driver is still responsi­ble for controlling the headlights and may need to switch them on and off manually depending on light and visibility conditions. For example, fog cannot be detected by the light sensors. So always switch on the low beams under these weather conditions and when driving in the dark.

TIPS

1. If the vehicle battery has been discharging for a while, the parking light may switch off automatically. Avoid using the parking Lights for several hours.
2. When using lighting equipment, the driver is responsible for adhering to any local applicable regulations while driving and when parking the vehicle.
3. Only the front headlights are on when the daytime running lights are switched on. In vehicles in certain markets, the tail lights will also turn on.
4. In cool or damp weather, the inside of the headlights, turn signals, and tail lights can fog over due to the temperature difference between the inside and outside. They will clear shortly after switching them on. This does not affect the service life of the lighting.

Turn Signal and high Beam lever

The lever operates the turn signals, the high beams and the headlight flasher.

Turn signals
The turn signal will activate when you move the lever into a turn signal position while the ignition is switched on. The respective indicator light will flash. The turn signal blinks three times if you tap the lever (convenience turn signal).

Right turn signal
Left turn signal

If an indicator light blinks twice as fast as usual, a turn signal bulb has failed. Carefully drive to an authorized Audi dealer or authorized Audi Service Facility immediately to have the malfunction cor­rected.

High beams and headlight flasher
Move the lever to the corresponding position:

High beams on (vehicles with High beam as­sistant*
High beams off or headlight flasher

The  indicator light in the instrument cluster will turn on.

WARNING
High beams can cause glare for other drivers, which increases the risk of an accident. For this reason, only use the high beams or the headlight flasher when they will not create glare for other drivers.

High beam assistant
Applies to: vehicles with high beam assistant

The high beam assistant automatically turns the high beams on or off depending on the surround­ing conditions.
A camera on the rearview mirror mount can de­tect light sources from other road users. The high beams switch on or off automatically depending on the position of vehicles driving ahead and on­coming vehicles, the vehicle speed as well as oth­er environmental factors and traffic conditions.

Activating high beam assistant
Requirement: the light switch must be in the AU­TO position and the high beam assistant must be switched on in the MMI.

1. To activate the high beam assistant, tap the lever forward. The in­dicator light will appear in the instrument clus­ter display and the high beams will be switched on or off automatically. The  indicator light will turn on if the high beams are switched on.

Activating and deactivating the high beam head lights manually
If the high beams did not switch on or off as ex­pected, you may switch them on or off manually instead:

1. To activate the high beams manually, tap the lever forward. The in­dicator light will turn on.
2. To deactivate the high beams manually, pull the lever back. The high beam assistant is deactivated.

Operating the headlight flasher
To operate the headlight flashers, pull the lever back. lf the high beam headlights are not switched on, the high beam assistant will remain activated.

WARNING

1. Observe the safety precautions and note the limits of the assist systems, sensors, and cameras.
2. High beam assistant is only intended to as­sist the driver. The driver is responsible for controlling the high beam headlights and adjusting them to match the lighting and visibility conditions.
3. High beams can cause glare for other driv­ers, which increases the risk of an accident. For this reason, only use the high beams or the headlight flasher when they will not cre­ate glare for other drivers.

TIPS
Adhere to any local applicable regulations when using the lighting equipment, for exam­ple in regard to reducing glare for other driv­ers. The driver is always responsible for adher­ing to the regulations applicable in the coun­try where the vehicle is being operated.

Adjusting the exterior lighting
The following settings depend on the vehicle equipment.

1. Applies to: MMI: Select on the home screen: VEHICLE > Light & Visibility > Exterior light­ing.

Automatic headlights
You can adjust the following settings in the Auto­matic headlights menu:

Activation time – You can adjust if the headlights switch on Early, Medium, or Late based on the sensitivity of the light sensor.
High beam assistant – You can switch the high beam assistant on and off.

Entry/exit Lighting
The Entry/exit lighting illuminates the area around the vehicle when the vehicle is unlocked or when the driver’s door is opened while the ig­nition is off. The entry/exit lighting works when it is dark and the light switch is in the AUTO posi­tion. The daytime running lights switch on auto­matically each time the vehicle is unlocked, re­gardless of how bright it is outside the vehicle.

Daytime running lights
USA models: The daytime running lights can be switched on and off.
Canada models: This function cannot be switched off. They activate automatically each time the ig­nition is switched on.

Emergency Flashers

The emergency flashers help to make other driv­ers aware of your vehicle in dangerous situations.

1. Press the button to switch the emergency flashers on or off.

When the emergency flashers are turned on, the indicator lights will flash at the same time. You can indicate a lane change or a turn when the emergency flashers are switched on by using the turn signal lever. The emergency flashers stop temporarily. The emergency flashers also work when the igni­tion is turned off.

TIPS
You should switch the emergency flashers on if:

1. you are the last car in a traffic jam so that all other vehicles approaching from behind can see your vehicle
2. your vehicle has broken down or you are having an emergency
3. your vehicle is being towed or if you are tow­ing another vehicle

Messages
The following messages may appear depending on the vehicle equipment:
If the    indicator light turns on, a bulb has failed. The displayed message indicates the cause and possible solutions. If one of the messages re­mains on, drive immediately to an authorized Audi dealer or authorized Audi Service Facility to have the malfunction repaired.

Audi adaptive light: malfunction! See own­er’s manual
Adaptive light is not working. The headlights still function. Drive immediately to an authorized Audi dealer or authorized Audi Service Facility to have the malfunction repaired.

Headlight range control: malfunction! See owner’s manual
There is a malfunction in the headlight range control system, which may cause glare for other drivers. Drive to an authorized Audi dealer or au­thorized Audi Service Facility immediately to have the malfunction corrected.

1. High beam assistant: malfunction! See owner’s manual

You can still switch the high beams on or off manually. Drive immediately to an authorized Audi dealer or authorized Audi Service Facility to have the malfunction repaired.

1. High beam assistant: currently unavailable. Camera view limited due to environmental conditions

This message appears if the camera’s visual field is blocked. The system will switch itself off. Try switching the systems on later.

Automatic headlights: malfunction! See owner’s manual
The light/rain sensor is malfunctioning. In the AUTO light switch position, the low beams re­main switched on at all times for safety reasons. Drive immediately to an authorized Audi dealer or authorized Audi Service Facility to have the malfunction repaired.

Interior Lighting

Front interior lighting

Interior lighting buttons

 Interior lighting on/off
Door contact switch on/off. The interior lighting is controlled automatically.

Touch-sensitive reading lights

1. To turn a reading light on or off, touch the sur• face G) briefly.
2. To activate the manual dimming function, touch the surface G) when the light is switched off and keep touching it until the desired brightness is reached.

Rear interior lighting

Reading lights

1. To switch the reading lamp on or off, press the button.
2. To activate the manual dimming function•. touch the surface while the light is switched off  and keep touching it until the desired brightness is reached.

Interior lighting
Applies to: vehicles with lnterior lighting
The ambient lighting turns on when the ignition is switched on. The O light switch position deacti­vates the interior Lighting.
The following settings depend on the vehicle equipment.

1. Applies to MMI: Select on the home screen: VE- HICLE > Light & Visibility> Interior lighting.

You can choose from various color profiles, such as Maritime.

Additional settings and profiles:

1. Brightness: you can adjust the brightness for all of the interior lighting.
2. Individual: you can adjust the brightness and color of the interior lighting separately for the line and surface lighting.
3. Audi drive select: the line and surface lighting color changes depending on the selected drive select mode.

TIPS
Depending on vehicle equipment, when the drive select* function is switched on, the color of the contour and surface lighting may brief­ly change to red or blue when the interior temperature is manually increased or de­creased.

Display brightness
You can set the instrument and display illumina­tion. The settings depend on the vehicle equip­ment.

1. Applies to MMI: select on the home screen: SETTINGS > Display & brightness.
   1. Cockpit dimming
   2. Head-up display
   3. MMI
   4. Audi virtual cockpit

Instrument illumination

You can adjust the background brightness of the instruments and display illumination.

1. Press the knob to release it.
2. Turn the knob toward”-” or”+” to reduce or in­crease the brightness.
3. Press the knob again to return it to its original position.

TIPS
Depending on vehicle equipment, the instru­ment illumination (needles and gauges) may turn on when the lights are off and the igni­tion is switched on. The illumination for the gauges reduces automatically and eventually turns off as brightness outside increases. This function reminds the driver to turn the low beams on at the appropriate time.

Vision

Adjusting exterior mirrors

1. Turn the knob in the driver’s door to the desired position:

Deactivates all adjustment functions.
Selects the left or right exterior mirror. To adjust the mirror glass in a mirror, press the knob in the desired direction.
Heats the mirror glass depending on the outside temperature.
Folds the exterior mirrors•. To fold the mir­rors out, turn the knob to one of the other posi­tions. In the MMI, you can select if the mirrors fold in automatically when you lock the vehicle.

Front passenger’s exterior mirror tilt function•
Requirement: the knob must be in the position for the front passenger’s exterior mirror.
The mirror surfaces tilt slightly when reverse gear is selected to provide a better view, for ex­ample of the edge of the curb.
You can adjust the mirror surface by turning the knob in the desired direction.

The mirror moves from the reversing position back to the original position:

1. When you switch the ignition off
2. When you drive forward at speeds faster than 9 mph (15 km/h).
3. When the knob is no longer in the position for the front passenger exterior mirror

WARNING
Curved mirror surfaces (for example convex) enlarge the field of vision. However, they make objects in the mirror appear smaller and farther away. When using these mirrors to es­timate your distance to vehicles behind you when changing lanes, you could estimate in­correctly, which increases the risk of an acci­dent.

NOTE

1. Applies to: vehicles with power folding exte­rior mirrors: If the mirror housing was moved by outside forces (such as an impact when maneuvering), you must use the pow­er folding function to fold the mirror all the way out. The mirrors will make a loud noise when they latch into place. The mirror hous­ing must note moved back into place by hand because this could impair the function of the mirror mechanism.
2. Applies to: vehicles without power folding exterior mirrors: If the mirror housing was moved by outside forces (such as an impact when maneuvering), you must move it back in place by hand.
3. If you wash the vehicle in an automatic car wash, you must fold the exterior mirrors in to reduce the risk of damage to the mirrors. Never fold power folding exterior mirrors• by hand. Only fold them in and out using the power controls.

TIPS
If the power adjusting function malfunctions, the glass in both mirrors can be adjusted by pressing on the edge of it by hand.

Dimming the mirrors
Manual dimming rearview mirror

1. Pull the lever on the bottom of the mirror back.

Automatic dimming rearview mirror
Applies to: vehicles with automatic dimming mirrors

1. The interior and exterior mirrors dim automati­cally when light shines on them, for example from headlights on a vehicle behind you.

WARNING

1. Electrolyte fluid can leak out from broken mirror glass. This liquid can irritate the skin, eyes and respiratory system. If there is con­tact with the fluid, flush immediately with plenty of water. Consult a physician if neces­sary.
2. Repeated or long-term exposure to electro­lyte fluid can lead to irritation of the air­ways, especially in people with asthma or other respiratory conditions. Take deep breaths immediately after leaving the vehi­cle or, if this is not possible, open all of the doors and windows as wide as possible.
3. If electrolyte fluid comes into contact with the eyes, flush them thoroughly with plenty of clean water for at least l 5 minutes and then seek medical attention.
4. If electrolyte fluid comes into contact with the skin, flush the affected area with clean water for at least l 5 minutes, and then clean with soap and water and seek medical attention. Clean affected clothing and shoes thoroughly before wearing again.
5. If the fluid was swallowed and the person is conscious, flush the mouth with water for at least 15 minutes. Do not induce vomiting unless this is recommended by medical pro­fessionals. Seek medical attention immedi­ately.

NOTE
Applies to: vehicles with automatic dimming mirrors
Electrolyte fluid can leak out from broken mir­ror glass. This liquid damages plastic surfaces and paint. Clean this Liquid as quickly as possi­ble, for example with a wet sponge.

TIPS

1. If the Light reaching the rearview mirror is obstructed, the automatic dimming mirror will not function correctly,
2. The automatic dimming mirrors do not dim when the interior lighting is turned on or the reverse gear is selected.

Sun visors

Sun visor
The sun visors can be moved out of their brackets and turned toward the doors.
They can also be moved back and forth length­wise in this position.

Vanity mirror
The mirror lighting switches on when the cover over the vanity mirror opens.

Sunshade
Applies to: vehicles with sunshade

Rear door sunshade
Pull the sunshade out and attach it to the re­tainer on the upper door frame.

Windshield Wipers

Switching the windshield wipers on

1. Move the lever  to the corresponding position:

Windshield wipers off
Rain sensor/intermittent mode. The wind­shield wipers switch on once the vehicle speed exceeds approximately 2 mph (4 km/h) and it is raining. The higher the sensitivity of the rain sen­sor that is set (switch@ to the right), the earlier the windshield wipers react to moisture on the windshield. You can deactivate the rain sensor mode, which switches the interval mode on. In in­termittent mode, you can adjust the interval time using the switch·

Applies to: MMI: Select on the home screen: VEHICLE > Light & Visibility> Rain sensor.

1. Slow wiping
2. Fast wiping

Single wipe. If you hold the lever in this posi­tion longer, the wipers switch from slow wiping to fast wiping.
Clean the windshield The number of wipes and after wipes depends on how long the lever is held in position·
The wipers wipe one time after several seconds of driving to remove water droplets. You can switch this function off by moving the lever to position ® within ten seconds of the after wipe. The after­
wipe function is reactivated the next time you switch the ignition on.
If you hold the lever in position® for longer than half a second, the edge wiping feature will be activated. This moves the windshield wipers closer to the edge of the windshield and per­forms an after wipe to clean the residue that re­sults from the wiping process from the edge of the windshield. The function is available when driving at speeds up to 75 mph (120 km/h).
The headlight washer system* operates only when the low beam headlights are on. If you move the lever into position®• the headlights will be cleaned at regular intervals.
Applies to: vehicles with rear window wiper: (z)­Wiping the rear window . The number of wipes depends on the windshield wiper movement.
The rear wiper automatically switches on when the reverse gear is selected and the front wind­shield wipers are on and running.
Applies to: vehicles with rear window wiper:@ ­Cleaning the rear window. The number of wipes depends on how long the lever is held in position@.
This may also clean the rearview camera, depend­ing on the vehicle equipment.

WARNING

1. The rain sensor is only intended to assist the driver. The driver may still be responsible for manually switching the wipers on based on visibility conditions.
2. The windshield must not be treated with water-repelling windshield coating agents. Under unfavorable conditions, such as wet­ness, darkness, and when the sun is low, these coatings can cause increased glare, which increases the risk of an accident. They can also cause wiper blade chatter.
3. Properly functioning windshield wiper blades are required for a clear view and safe driving, Cleaning/changing wip­er blades.

NOTE

1. If there is frost, make sure the windshield wiper blades are not frozen to the wind­shield. Switching on the windshield wipers when the blades are frozen to the wind­shield can damage the wiper blades.
2. Prior to using a car wash, the windshield wiper system must be switched off (lever in position@}. This prevents the wipers from switching on unintentionally and causing damage to the windshield wiper system.

TIPS

1. The windshield wipers switch off when the ignition is switched off. You can activate the windshield wipers after the ignition is switched on again by moving the lever to any position. The single wipe function (lever in position also functions when the igni­tion is switched off.
2. Worn or dirty windshield wiper blades result in streaking. This can affect the rain sensor function. Check your windshield wiper blades regularly.
3. The washer fluid nozzles for the windshield washer system are heated when the ignition is on if the outside temperature is low.
4. When stopping temporarily, such as at a traffic light, the speed of the windshield wipers automatically reduces by one level.

Cleaning/changing wiper blades

Wiper Blade Replacement Position

1. Switch off the ignition and hold the windshield wiper lever in position@ c) fig. 51 un­til the windshield wiper moves into the wiper blade replacement position.
2. To bring the windshield wipers into the normal position, switch the ignition on and hold the lever in position© until the windshield wipers go back to the original position, or drive faster than 8 mph (12 km/h).

You can also turn the wiper blade replacement position on or off in the MMI:

1. Switch the windshield wipers off (position.
2. Applies to MMI: Select on the home screen: VE· HICLE > Settings & Service> Wiper change position.

Cleaning the wiper blades
Requirement: the windshield wipers must be in the wiper blade replacement position.

1. Fold the windshield wiper arm away from the windshield.
2. For information on cleaning, see c) table.

Replacing the wiper blades
Requirement: the windshield wipers must be in the wiper blade replacement position.

1. Fold the windshield wiper arm away from the windshield.
2. Hold the wiper blade firmly.
3. Press the locking knob G) on the wiper blade.
4. Remove the wiper blade from the windshield wiper arm mount.
5. Insert the new wiper blade into the mount on the wiper arm until it clicks into place.
6. Place the wiper arm back on the windshield.
7. Exit the wiper blade replacement position.

WARNING

1. For safety reasons, the windshield wiper blades should be replaced once or twice each year.
2. Dirty windshield wiper blades can impair vi­sion, which increases the risk of an accident.

NOTE

1. The windshield wipers must only be lifted up when in the wiper blade replacement po­sition. Otherwise, you risk damaging the paint on the hood or the windshield wiper motor.
2. You should not move your vehicle or press the lever when the wiper arms are folded up from the windshield. The windshield wipers would move back into their original position and could damage the hood and windshield.

TIPS

1. You can also use the wiper blade replace­ment position for other reasons, for exam­ple if you want to protect the windshield from icing by using a cover.
2. You cannot activate the wiper blade replace­ment position when the hood is open.

Cleaning/changing the rear wiper blade
Cleaning the Wiper Blades

1. Fold the wiper arm away from the rear window.
2. For information on cleaning,

Removing the wiper blade

1. Fold the wiper arm away from the rear window.
2. Remove the wiper blade from its holder..

Installing the wiper blade

1. Press the wiper blade mount into the retainer.
2. Fold the window wiper arm back onto the rear window.

WARNING
For safety reasons, the windshield wiper blades should be replaced once or twice each year.

Messages
The following messages may appear depending on the vehicle equipment:
If the indicator light turns on, then there is a windshield wiper malfunction. The message that is also displayed indicates the cause and possible solutions. If one of the messages does not turn off, drive immediately to an authorized Audi dealer or authorized Audi Service Facility to have the malfunction repaired.

Automatic wipers: malfunction! See owner’s manual
The light/rain sensor is malfunctioning. You can still control all functions that are not controlled by the rain sensor using the windshield wiper lev­er. Drive immediately to an authorized Audi deal­er or authorized Audi Service Facility to have the malfunction repaired .

FAQs

Useful Links

View Full PDF : 2022 Audi A4 Owner’s Manual |Auto User Guide