2022 Audi R8 Owner’s Manual
The 2022 Audi R8 continues to show that Audi is at the top of its game when it comes to performance tech and elegant design. The R8 gets a lot of attention on the road because of its sharp lines and aerodynamic shape. Under the hood is a strong engine, which is the heart of this high-performance machine and gets it moving at speeds that are thrilling. The R8’s cabin is a mix of luxury and sportiness, with high-end materials and the latest technology. As an example of how innovative Audi is, the 2022 R8 is set to give drivers a unique experience that combines speed, style, and the latest technology.
Garage door opener
Description
This applies to: vehicles with garage door opener
With the garage door opener, you can activate systems such as the garage doors, security systems or house lights from in s ide your vehicle. Up to three remote cont rol functions can be programmed to the three buttons that are integrated in the control unit above the rearview mirror. To be able to operate systems using the garage door opener, the buttons in the control unit must first be programmed.
Operation
This applies to: vehicles with garage door opener
Requirement: the button in the control panel must be programmed ¢ page 30 and the vehicle must be located within range of the system, such as the garage door.
- Press the button to open the garage door. The green LED G) blinks or turns on.
- Press the button again to close the garage door.
Programming the transmitter
This applies to: vehicles with garage door opener
- Programming the button: step 1 on the control panel
- Switch the ignition on.
- Press both of the outside buttons on the control unit ¢ page 30, fig. 2 7 until the yellow LED @ turns off and the green LED G) turns on. This procedure clears the standard codes that were set at the factory and does not need to be repeated again to program the other buttons.
- Briefly press the button in the control panel that you want to program.
- Wait until the yellow LED @ blinks. The programming mode is active for five minutes.
- Go in front of the vehicle with the original remote control transmitter for the system that you are programming to the control panel button.
Programming the button: step 2 at the radiator grille - Hold the remote control transmitter at the vehicle radiator grille ¢ fig. 28.
- Now press the remote control transmitter until the turn signals on your vehicle blink. This can take up to 30 seconds.
- If the emergency flashers blink three times, the programming was successful. If the emergency flashers only blink one time, the five-minute time limit for programming has expired or the programming was unsuccessful. Repeat the programming procedure starting from the third step or change the distance to the radiator grille.
- If the garage door or other systems do not open with the HomeLink buttons even if the programming was successful, the system may use a rolling code instead of a fixed code. You must also then perform rolling code programming > page 37. The other two buttons in the control panel can be programmed using the instructions given above. Start with step 3.
Deleting button programming
The programmed buttons cannot be deleted individually. They must be deleted all at once. Reprogram the buttons if necessary.
- Switch the ignition on.
- Press both of the outside buttons on the control unit until the yellow LED (2) turns off and the green LED () turns on.
Reprogramming buttons
- Switch the ignition on.
- To reprogram an individual button, press the desired button until the green LED (@) turns off and the yellow LED (2) starts to turn on (after approximately 10 seconds). Release the button immediately. The programming mode is active for 5 minutes and is indicated by a blinking yellow light.
- Continue with step 5.
Rolling code programming
Applies to: vehicles with garage door opener
On some systems, programming a rolling code is
also necessary.
Identifying a rolling code
After programming a rolling code successfully (in front of the vehicle), the yellow LED stays on when returning to the vehicle. It turns off the next time the button is pressed. It will then blink green and the garage door opener will send the required signal. The garage door opener will also send the signal and the LED will blink green whenever the button is pressed after that.
- Program the rolling code as follows:
Activating the system motor unit - Locate the programming button on the system motor unit. The exact location and color of the button may vary depending on the brand.
- Press the programming button on the system motor unit (usually this will activate a “display” on the motor unit). You now have approximately 30 seconds to program the button in the control panel.
Programming the button in the control panel
- Press and hold the previously programmed button in the control panel for two seconds.
- To complete rolling code programming, press and hold the button again for two seconds.
- On some systems, the button might need to be pressed a third time to end the programming procedure.
After programming, the system should recognize the signal and operate when the button in the control panel is pressed. Now you may program the other buttons as needed.
Power top
Automatic power top
General information
Applies to: vehicles with power top The power top opens and closes automatically. When open, the power top is stored completely in the power top compartment. The power top can be opened or closed at speeds up to 30 mph (50 km/h). The power top will not open when the temperature is below 5 °F (-1 5 °C). Under normal conditions, the power top is windand waterproof. In rare cases, small droplets of water may form under extreme weather conditions, such as torrential or prolonged rain. That is normal and no cause for concern. Follow the care instructions to keep the power top free of leaks and to maintain its appearance ~ page 232, Care and cleaning.
Also observe the following:
- Open and stow the power top only when it is clean and dry. Stowing the power top when it is damp can create imprints in it, and mildew and other damage can result if it is left stowed while damp for long periods of time.
- To prevent scratching or damaging the power top, do not use any sharp-edged objects to remove ice and snow. The rear window may be cleared of ice with a standard ice scraper.
- Do not leave the power top open for several weeks or the creases in it may become discolored.
- Do not open the power top when the temperature is below 32 °F (0 °(). The fabric in the power top loses elasticity in temperatures below the freezing point.
Opening and closing the power top
This applies to: vehicles with power topRequirement: the engine compartment lid must be closed.
Opening and closing the power top
- Switch the ignition on.
To open or close the power top, pull or press and hold the power top switch until the top is completely opened or closed .
Opening and closing the power top (automatic operation)
Requirement: the speed must be between 4 mph (6 km/h) and 30 mph (SO km/h).
- Switch the ignition on.
To open/close the power top all the way, briefly pull/press the power top switch. It is not necessary to hold the switch.
The status of the power top is shown in the instrument cluster when operating the power top switch. A message will appear in the instrument cluster if the power top cannot be opened or closed.
Power top convenience opening and closing
This applies to: vehicles with power top
Convenience opening with the driver door lock
- To unlock the vehicle, press the @ button on the remote control key.
- Turn the key once in the driver door lock to the unlock position (a).
- Turn the key to the opening position @ again within two seconds and hold it there until the power top opens completely.
Convenience closing with the driver door lock
- Turn the key once in the driver door lock to the lock position @).
- Turn the key to the closing position @) again within two seconds and hold it there until the power top closes completely.
Convenience opening with the convenience key*
- Press the fj button on the convenience key to unlock the vehicle.
- Press the @ button a second time within two seconds and hold it until the power top opens completely.
Convenience closing with the convenience key*
- Press the f button on the convenience key to lock the vehicle.
- Press the fj button a second time within two seconds and hold it until the power top closes completely.
The opening or closing process will stop immediately if you release the key or stop touching the button. Opening and closing with the convenience key is possible from up to 13 feet (4 m) away.
FAQ
A: The 2022 Audi R8 features updated design elements, improved performance options, and enhanced technology features compared to its predecessors.
A: The 2022 R8 is available with a range of engines, including potent V10 options, delivering impressive power and acceleration.
A: Yes, the 2022 R8 continues to offer Audi’s renowned Quattro all-wheel drive system for enhanced traction and handling.
A: While specific figures can vary, the 2022 R8 is expected to deliver rapid acceleration, potentially achieving 0 to 60 mph in under 3 seconds.
A: Absolutely, the 2022 R8 is likely to showcase Audi’s latest infotainment and driver-assistance technologies, enhancing the driving experience.
A: The interior is anticipated to strike a balance between luxury and sportiness, offering premium materials, customizable options, and a driver-centric cockpit.
A: The 2022 R8 is expected to come equipped with advanced safety features such as adaptive cruise control, lane departure warning, and automatic emergency braking.
A: Audi might offer different trim levels for the 2022 R8, allowing buyers to select from various performance options, packages, and features.
A: The 2022 R8 is likely to offer exceptional handling and driving dynamics, thanks to precise steering, advanced suspension, and Quattro all-wheel drive.
A: Despite being a high-performance sports car, the 2022 R8 can still provide comfort and practicality for everyday driving.
A: While sports cars aren’t typically known for efficiency, Audi may have made improvements in the 2022 model to enhance MPG.
A: The 2022 R8 will likely continue to compete with other high-performance sports cars, offering Audi’s unique blend of luxury and performance.
A: Audi might introduce special limited-edition variants of the 2022 R8, featuring distinctive design elements and performance enhancements.
A: Audi typically offers a range of customization options, allowing buyers to personalize aspects like paint colors and interior trims for the 2022 R8.
A: While prices can vary based on configurations and options, the 2022 R8’s cost is likely to reflect its high-performance nature and luxurious features.