Repair Fuses: 2023 Audi e-tron Fuses and Fuse Diagrams
Welcome to the world of power and precision in automotive maintenance. The 2023 Audi e-tron is a vehicle that represents the ultimate in terms of performance and innovation in the field of cutting-edge electric vehicles. Like any complex piece of equipment, proper operation depends on your ability to comprehend the subtle differences between its parts. We explore the fundamentals of electrical systems in this guide, starting with the 2023 Audi e-tron’s fuse box diagram and fuses. With a thorough understanding of the fuse system, you’ll be able to fix electrical problems, swap out bad fuses, and keep your Audi e-Tron operating at its best. So join us as we take a deep dive into automotive electrical systems to uncover the mysteries hidden behind the fuses that maintain the smooth operation of your 2023 Audi e-tron on the leading edge of electric mobility.
2024 Audi Q8 e-tron Specs, Price, Features, Mileage and Torque
Fuses and bulbs
Fuses
Replacing fuses
Fuses are installed in various locations in your vehicle.
The following information only lists fuses that you can change yourself. To have other fuses changed, contact an authorized Audi dealer or authorized Audi Service Facility. The following table does not list fuse locations that are not used. A fuse that has blown will have metal strips that have burned through. The fuses are located on the right side of the front compartment in the front passenger footwell and under the left side of the luggage
compartment.
- Switch the ignition and all electrical equipment off.
- Check the table that follows to see which fuse belongs to the affected equipment.
- Remove the screwdriver from the vehicle tool kit.
- Remove the appropriate cover.
- Remove the colored plastic bracket from the fuse panel, if present.
- Remove the clip from the fuse panel in the front passenger’s footwell.
- Remove the fuse using the clip.
- Replace the blown fuse only with a fuse that has the same amp rating.
- Reinstall the plastic bracket, if present.
- Install the cover.
Fuse color identification
Color |
Current rating In amps |
|
Black |
l |
|
Gray |
2 |
|
Purple |
3 |
|
Pink |
4 |
|
UgMhmwn |
5 |
|
Brown |
7.S |
|
Red (narrow) |
10 |
|
Light blue |
,s |
|
YeUow |
20 |
|
White or transp |
,arent 25 |
|
Light green |
30 |
|
Tea[ Orange |
35 |
|
40 |
||
Red {wide) |
50 |
Warning
Do not repair fuse and never replace a blown fuse with one that has a higher amp rating. This can cause damage to the electrical system and increases the risk of fire.
Note
If a new fuse burns out again shortly after you have installed it, have the electrical system checked as soon as possible by an authorized
Audi dealer or authorized Audi Service Facility.
Tips
‘Some of the equipment listed in the following tables applies only to certain model versions or certain optional equipment.
Fuses assignment front compartment
No. |
Equipment |
||||
– 2 4 |
Electrical cha.rging1 port door |
||||
Climate, control.system compressor High-voltage battery |
|||||
5 |
Hi |
,gh-voltage charger |
|||
6 |
Thermal management |
||||
7 11 |
!Electric dr·ve system, power electronics |
||||
High-voltage charge |
,er |
||||
13 |
Thermal management |
||||
1 |
Windshield washer system control module |
||||
15 |
High-vo tage battery coo and pump |
||||
16 17 |
Windsield wipers |
||||
Therma |
, management |
||||
1 |
18 |
Therma,t management |
|||
1 |
‘9 |
Then a management |
Fuses assignment footwell
The fuse assignment on right-hand drive vehicles 13 | Thermal management is a mirror image of this.
Fuse panel (D (black) |
|||||
No. |
Equipment |
,n |
1t |
||
3 |
Climate con |
,rol system, fragrance system, |
|||
ionizer |
|||||
– 5 |
– read- |
·p display |
|||
US:S ports with charging function |
|||||
6 |
DVD drive |
||||
7 |
Steering column lock |
||||
8 |
Upper/lower display |
Fuse panel G) (black) |
|||
9 |
Instrument clus • |
er |
|
10 |
Volume co |
, trol |
|
11 |
Light switch; switch panels |
||
12 |
Steering co |
:tumn electronics |
|
15 |
Steering column adjustment |
||
16 |
Steering wh e hea ing |
Fuse panel @ (black) |
|||||
No. |
|
Equipm. |
en |
.t |
|
1 |
Front seat heating |
||||
2 |
Climate |
•control system |
|||
3 |
– Left I headlight electronics Panoramic glass roof |
||||
4 |
|||||
5 |
Left firont door con rol module |
||||
6 |
Soc |
.ets. |
|||
B |
lnstrum1ent panel Right headlight elec ron1ics Wi.ndshie d washer system/headlight washer sys:t m |
||||
9 |
|||||
10 |
|||||
1.2 |
Parking Lock |
Fuse panel @ (red) |
||||||
No.. |
Equipment |
|||||
|
Anti-theft are system |
|||||
I 1. |
||||||
2 Drive system control module I |
· |
|||||
Emergency call and communication- 3 control module |
||||||
4 |
Selector lever |
|||||
5 |
Horn |
|||||
6 |
Parking brake |
|||||
7 |
High -voltage battery; ba t |
,ery monitoring |
||||
control module |
||||||
B |
Roof electronics control module |
|||||
9 |
Exterior sound genera |
• or |
||||
lO |
Air/bag control |
!l module |
||||
1 |
Left front lumbar support |
|
||||
12 |
Diagnostic connect ion, light/rain sens. or |
|||||
14 |
R’ghtfron door control module |
|||||
15 |
Climate contro1 sys em compressor |
|||||
16 |
CUmate control system blo, er I |
Fuse panel @ (brown) |
|||||
No. |
Equipment |
||||
|
El |
,electronic Toll (olle,action System (ETC |
|||
2 |
Right front safety be |
·, tensioner |
|||
4 |
eft front safety belt tensioner |
||||
5 |
Air suspension/suspension control |
||||
6 |
Right headlight |
||||
7 |
L |
, eft headlight |
|||
8 |
L |
, eft r |
,ea,r door control module |
||
9 |
Right rear door control module |
||||
10 |
infotainment t system |
||||
11 |
Driver assistance systems control model.e Diagnostic interface |
||||
12 |
Fuse panel© (black) |
|||||
No |
Equipment |
||||
– 3 |
Trailer h t, ch Passenger1s side rear safety belt tensioner |
||||
|
|||||
4 |
Driver’s side l!’ ear safety belt tensioner |
||||
s |
Trainer hitch socket |
||||
6 |
Left trail |
.er hitch light |
|||
8
9 –
1 |
Rear seat heat |
1ing |
|||
Convei: fence ‘System control module. left tail light |
|||||
Luggage compartment |
, ent Ud central1looking. |
||||
elect1ricat charging port door.; co:convenience |
|||||
system control module |
,e |
||||
12 |
The luggage compartment lid control module |
Fuse panel@ |
||
No. |
Equi |
,payment |
|
|
Fuse panel @ (brown) |
||||||||
No. |
Eq |
1uipment |
||||||
1 |
Driver assistance systems control module |
|||||||
2 |
Audi phone box |
|||||||
3 |
Right |
.ront lumbar support |
||||||
4 |
Side Assist |
|||||||
5 |
Service disconnect |
·ct switch |
||||||
6 7 |
lir |
,e pressure |
,e mon·to |
,ring system |
||||
AuKitiary climate control |
||||||||
8 |
Exterior antenna |
|||||||
9 |
Rear di mate control system control panel |
|||||||
10 |
TV tunerj data exchange and telema,tics control module |
|||||||
1 I |
Virtua |
l exterior |
·or mirrors, co,nv:lenience ac- |
|||||
cess and start authorization control mod- |
||||||||
u: |
te |
|||||||
12 |
Garage door opener |
|||||||
13 |
Rearvj |
,camera, peripheral cameras |
||||||
14 |
Convenience system control module. right |
|||||||
tan l |
.ight |
|||||||
15 |
Right trailer hitch Ught |
How to Replace Fuses of Audi e-tron
Certainly! Here’s a detailed guide on how to replace fuses in your Audi e-tron along with some helpful tips:
-
Locate the Fuse Box: The fuse box in the Audi e-tron is typically located in the engine bay or under the dashboard on the driver’s side. Look for a panel labeled “Fuse” or “Fuses” to access it.
-
Turn Off the Vehicle: Before starting, ensure that the vehicle’s ignition is turned off, and remove the key from the ignition switch to prevent electrical mishaps.
-
Identify the Blown Fuse: Using a flashlight, carefully examine the fuses inside the fuse box. Look for any fuses with a broken wire or a discolored appearance, indicating that they have blown.
-
Select a Replacement Fuse: Choose a replacement fuse with the same amperage rating as the blown fuse. Using a fuse with a different rating could cause electrical issues or damage to your vehicle.
-
Remove the Blown Fuse: Use a fuse puller tool if provided, or a pair of needle-nose pliers, to firmly grip the blown fuse. Pull the fuse straight out of its socket, being careful not to damage the fuse box or adjacent fuses.
-
Insert the Replacement Fuse: Carefully insert the replacement fuse into the empty socket in the fuse box. Ensure it is seated securely and fully inserted to establish proper electrical connection.
-
Check for Proper Fit: Double-check that the replacement fuse fits snugly into the socket and matches the amperage rating of the blown fuse. It should not be loose or protruding from the socket.
-
Replace the Fuse Box Cover: Once the blown fuse is replaced, carefully reattach the fuse box cover and ensure it is securely fastened to prevent debris from entering.
-
Test the Circuit: Turn the ignition key to the accessory position or start the vehicle to test the circuit associated with the replaced fuse. Verify that the electrical component or system is functioning correctly.
-
Dispose of the Blown Fuse: Dispose of the blown fuse properly. You can keep it as a spare in case of future emergencies or dispose of it according to local regulations for electronic waste.
Helpful Tips:
- Use caution when handling fuses and ensure that the vehicle’s ignition is turned off to avoid electrical accidents.
- Keep spare fuses of various amperage ratings in your vehicle’s glove compartment for quick replacements during emergencies.
FAQs
The 2023 Audi e-tron’s fuses act as safety measures, cutting the circuit when an overload or short circuit happens to shield the electrical components from harm.
Depending on the model and version, the fuse box of the 2023 Audi e-tron is usually found in the interior cabin or the engine compartment.
A clearly melted or broken wire inside the fuse is frequently a sign that the fuse has blown. The fuse’s internal metal strip may occasionally become discolored as wellA clearly melted or broken wire inside the fuse is frequently a sign that the fuse has blown. The fuse’s internal metal strip may occasionally become discolored as well
Needle-nose pliers or a fuse puller are typically needed to replace a fuse. Before attempting to replace a fuse, make sure the car is off.
Yes, various fuse types, such as blade-type and mini-blade fuses, may be used in the Audi e-tron.
No, using a fuse with a higher amperage rating is not advised as this could jeopardize the electrical system’s safety. Fuse replacement should always be done with the same amperage.
Unless there are electrical problems, routine fuse checks are usually not necessary. If you experience electrical issues, you should check your fuses.
Use the proper tools, make sure the car is off, and put on safety gear.
A fuse kit containing extra fuses and a fuse puller might be offered by Audi.
The owner of the car can usually replace small fuses on their own. However, it’s best to speak with a qualified technician if you’re unsure or if the problem continues.
Fuse failures on a regular basis could point to an underlying electrical problem. See an authorized Audi service technician for assistance in identifying and resolving the issue.
Beyond what the manufacturer recommends, upgrading fuses is not advised as it could jeopardize the vehicle’s safety and warranty. Adhere to the recommended amperage and fuse types.
Useful Links
View Full PDF: 2023 Audi e-tron Owner’s Manual| Auto User Guide
2024 Audi Q8 e-tron Specs, Price, Features, Mileage and Torque