2023 ACE STANDARD 250
With the ACE Standard 250, a motorcycle that completely changes the way you enjoy the open road, get ready to set out on an exhilarating ride. Whether you’re an experienced rider or are just starting out on your two-wheeled adventures, this bike is made to give you the ideal balance of strength, style, and dependability. The ACE Standard 250 is more than just a motorcycle; it represents liberty and uniqueness. It is prepared to attract attention and win hearts wherever you ride thanks to its amazing performance and beautiful design.
Price
The price of ACE STANDARD is $3,700 est.
Colors
Matte Black – Gloss Red – Gloss Green
Specifications
Engine
Engine | Specification |
---|---|
Engine Type | Double cylinder, 4-stroke, air-cooled |
Displacement | 250 ml |
Bore × Stroke | 55 x 53 mm |
Compression Ratio | 9.3:1 |
Max. Power | 16.7/8500 kW/rpm |
Max. Torque | 16/6000 Nm/rpm |
Max. Speed | 120 km/h |
Lubrication | Pressure, splash |
Clutch Type | Multiplate wet clutch |
Ignition | ECU/CDI |
Starting System | Electric |
Fuel System | EFI |
Transmission System | Chain drive, 6 gears |
Suspension
Suspension | Specification |
---|---|
Front Suspension | Stand fork |
Rear Suspension | Twin coil-over oil-damped shocks |
Front Brake | Double disc with ABS |
Rear Brake | Single disc with ABS |
Front Tire | 100/80 – 17 |
Rear Tire | 130/70 – 17 |
Dimensions
Dimensions | Measurement |
---|---|
L × W × H | 2045 × 830 × 1130 mm |
Seat Height | 785 mm |
Wheelbase | 1410 mm |
Min. Ground Clearance | 180 mm |
Max. Permissionable Weight | 145 kg |
Rider Capacity | 2 Persons |
Dry Weight | 157 kg |
Engine Oil | 1.8 L |
Fuel Tank Capacity | 16 L |
Battery | 12V – 9Ah |
Chassis
Chassis | Specification |
---|---|
Chassis | Square backbone, stressed |
Seat | Rider/pillion bench seat |
Footrests | Folding rider footrests |
Frame type | Tubular steel |
Rake | 29 degrees |
Trail | 100mm |
Swingarm | Cast aluminum |
Fork clamps top | Forged steel |
Fork clamps bottom | Aluminum |
Handlebar | Cast aluminum |
Handlebar clamp | Ball/race |
Stem bearings | Inverted forks. 38mm |
Front Suspension | Cartridge damping |
Rear Suspension | Twin coil-over oil-damped shocks |
Rear wheel travel | 330mm length eye-to-eye |
Front-wheel travel | Spring preload-adjustable 5 stage |
Front-wheel | 2.50″ × 17″ aluminum |
Front tire | 110/70-17 54S |
Tire pressure front | Tube type |
Front axle diameter | Max load 466lbs (212kg) |
Rear wheel | 3.5″ x 17″ aluminum |
Rear tire | 130/70-17 62S |
Tire pressure rear | Tube type |
Rear axle diameter | Max. load 583 lbs (265kg) |
Front brake | Single 298mm rotor |
2-piston slide caliper | |
DOT brake hose | |
Rear brake | 210mm single rotor |
1 piston slide caliper |
CONTROLS
HANDLEBAR CONTROLS
Clutch Lever
The Clutch lever A is located on the left side of the handlebar.
Headlight Switches
The high beam flasher B flashes the high beam temporarily to get the attention of unatentive vehicles, or to temporarily see an item in your pathway. The toggle switch C will toggle between high and low beams.
Engine Start / Stop Switches
The stop switch A turns off the engine. When this button is pressed forward, it will turn off the running motor, and prevent it from starting. When in the rear position, B the motor can run.
Emergency Flasher Switch
When parked on the side of the road, or you are in need of extra visibility, push this switch to the left, C for the flashers to illuminate.
Engine Start Switch
Press this button D momentarily to turn over the engine for starting. Do not hold this switch down for more than 10 seconds at a time.
Hand Brake Lever & Throttle
The front brake lever A and throttle B are mounted on the right side of the handlebar.
FUEL CAP / IGNITION / PETCOCK
Fuel Cap
To Open: Insert the ignition key A and turn clockwise.
To Close: Turn the key clockwise and push down on the cap, it should sit flush when closed completely.
NOTE: Do not fill the gas tank to the top of the fuel cap. This motorcycle is equipped with an EVAP system. Overfilling will cause this system to flood and potentially cause damage, poor performance, and stalling issues from vapor lock.
Keyed Ignition Switch
The ignition key is used to supply power from the battery to the electrical components of the motorcycle in the “ON” position.A Turn the switch to the “OFF” position B when you are finished riding, or if you wish to stop the engine.
This motorcycle is equipped with a steering lock.
Turn the handlebars full right or left, push the key IN, and turn to position C to lock the steering for security.
Fuel Valve (Petcock)
Location: bottom of the gas tank, rider’s left side.
OFF – In this position, the fuel valve is closed. No fuel flows from the tank to the carburetor. The lever will be parallel to the ground when off
ON – In this position, the fuel valve is open. Fuel flows from the tank to the carburetor. The fuel tank empties down to the reserve level. The Arrow will be pointing up, towards the sky. In this position, you are as free as a bird!
RESERVE
In this position, you will have extra fuel in the case that you run out, or forget to fill up. Never begin your ride with the reserve on, this would remove your safety net, and you do not want to get stranded. Down towards the earth, the gas gods are telling you to refill: listen to the gas gods.
FAQ’S
The cost of ACE STANDARD is $3,700 est.
Ace standard 250 has a torque of 16/6000 Nm/rpm.
The top speed of Ace standard 250 is 75 Mph.
Since ACE motorcycles typically have good fuel economy, they are suitable for daily commuting.
The horsepower of Ace Standard 250 is 16.7/8500 kW/rpm.
Conclusion
The adaptable and dependable ACE STANDARD 250 solution offers substantial advantages to both people and enterprises. It’s a good option for a variety of applications thanks to its user-friendly design and powerful functionality. In the years to come, ACE STANDARD 250 will no doubt continue to satisfy its consumers’ changing needs because of its dedication to high-quality standards and ongoing innovation. ACE STANDARD 250 is a dependable partner who consistently produces the outcomes you need, whether you’re looking for increased productivity, security, or simplicity in your business operations.