2024 BMW 2 Series Engine Oil and Fluids Guide
The 2024 BMW 2 Series uses engine oil and fluids in a new, cutting-edge way, showing that the brand is dedicated to both speed and sustainability. The new model was carefully designed and built, and it uses cutting-edge technologies to make its engine more efficient and last longer. Formulations of BMW’s engine oil that are specially made for the 2 Series make sure that important engine parts are well lubricated and protected, even when going very hard. The fluid management system is also meant to improve cooling and reduce friction, which leads to better efficiency and fuel economy. In line with the brand’s efforts to be more environmentally friendly, BMW makes sure that its fluid solutions are made with materials that are good for the environment. The 2024 BMW 2 Series opens up a whole new world of engine oil and fluid control. It offers both speed and concern for the environment.
2024 BMW X5 Review, Price, Features And Mileage (Brochure)
Engine oil
General
Engine oil consumption depends on the driving style and operating conditions.
Therefore check the engine oil level regularly each time you fill up with fuel by taking a detailed measurement.
Engine oil consumption may increase due to the following, for example:
- Dynamic driving style.
- While running in the engine.
- Engine idling.
- Use of engine oil grades rated as unsuitable.
Different Check Control messages are shown on the control display, depending on the engine oil level.
The manufacturer of the vehicle recommends having the engine oil changed by an authorised Service Partner another qualified service partner or a specialist workshop.
Safety information
NOTICE
Too little engine oil causes engine damage. There is a risk of material damage. Top up with engine oil immediately.
NOTICE
Too much engine oil can damage the engine or the catalytic converter. There is a risk
of material damage. Do not add too much engine oil. If there is too much engine oil, have the engine oil level corrected by an authorised Service Partner another qualified Service Partner or a specialist workshop.
NOTICE
If the engine oil is not changed at the cor-rect time, engine wear may increase which could cause engine damage. There is a risk of material damage. Do not exceed the service date indicated in the vehicle.
Electronic oil measurement
General
Electronic oil measurement uses two measuring procedures:
- Monitoring.
- Detailed measurement.
When frequently making short journeys or using a sporty driving style, for example, fast cornering, perform a detailed measurement at regular intervals.
Monitoring
Principle
The engine oil level is monitored electronically during the journey and can be shown on the control display.
If the engine oil level is outside its permissible operating range, a Check Control message is shown.
Operating requirements
A current reading is available after approxi-mately 30 minutes of normal driving.
Displaying the engine oil level
- “CAR”
- “Vehicle status”
“Engine oil level” The engine oil level is displayed.
System limits
When frequently making short journeys or using a sporty driving style, it may not be possible to obtain a measurement. In this case, the measurement for the last, sufficiently long journey is displayed.
Detailed measurement
Principle
The engine oil level is checked when the vehi-cle is stationary and is shown on a scale.
If the engine oil level is outside its permissible operating range, a Check Control message is shown.
General
During measurement, the idle rotational speed is increased slightly.
Operating requirements
- The vehicle is standing on level ground.
- Manual transmission: gearshift lever in idle position, clutch and accelerator pedal not pressed.
- Steptronic transmission: selector lever in selector lever position N or P and accelerator pedal not pressed. The selector lever in the selector lever positions N or P and the accelerator pedal is not pressed.
- The drive-ready state is switched on by pressing the Start/Stop button.
- The engine is at operating temperature.
Carrying out a detailed measurement
- “CAR”
- “Vehicle status”
- “Engine oil level”
- “Engine oil level measurement”
- “Start measurement”
The engine oil level is checked and shown on a scale.
Topping up engine oil
General
Do not top up engine oil unless a message
is displayed in the instrument cluster. The top-up quantity is specified in the message on the control display.
Only top up with suitable engine oil grades.
Stop the vehicle safely and switch off the drive-ready state before topping up with engine oil.
Do not add too much engine oil.
Safety information
WARNING
Operating fluids, for example, oils, greases, coolants and fuels, can contain substances that are harmful to health. There is a danger of injury or danger to life. Please comply with the instructions on the containers. Do not allow operating fluids to come into contact with clothing, skin or eyes. Do not pour operating fluids into other bottles. Keep operating fluids out of the reach of children.
NOTICE
Too little engine oil causes engine damage. There is a risk of material damage. Top up with engine oil immediately.
NOTICE
Too much engine oil can damage the engine or the catalytic converter. There is a risk
of material damage. Do not add too much engine oil. If there is too much engine oil, have the engine oil level corrected by an authorised Service Partner another qualified Service Partner or a specialist workshop.
Overview
The oil filler neck is in the engine compartment. For further information:
Overview, see page 330.
Topping up engine oil
- Open the bonnet.
Opening, see page 331. - Turn the cap anticlockwise to open.
- Add engine oil.
- Tighten cap.
2024 BMW X5 Review, Price, Features And Mileage (Brochure)
Engine oil grades for topping up
General
Engine oil quality is a critical factor in the serv-ice life of the engine.
Only top up with the types of engine oil that are listed.
Some engine oil grades may not be available in all countries.
Safety information
NOTICE
Oil additives can damage the engine. There is a risk of material damage. Do not use oil additives.
NOTICE
Using the wrong engine oil can result in engine malfunctions and damage. There is a risk of material damage. When selecting the engine oil, ensure it is the correct oil specification.
Suitable engine oil grades
Engine oil with the following oil specifications can be topped up:
Petrol engine
BMW Longlife-12 FE.
BMW Longlife-17 FE+.
BMW Longlife-19 FE.
Diesel engine
BMW Longlife-04.
BMW Longlife-12 FE.
Alternative engine oil grades
If suitable engine oils are not available, up to 1 litre, approx. 2 pints, of engine oil with the following oil specifications can be used for topping up:
Petrol engine
ACEA C2.
ACEA C5.
ACEA C3.
Diesel engine
ACEA C2.
ACEA C3.
Viscosity classes
When selecting an engine oil, make sure that the engine oil belongs to one of the following viscosity classes:
Petrol engine
SAE 0W-20.
SAE 0W-30.
Diesel engine
SAE 0W-30.
SAE 5W-30.
SAE 0W-40.
SAE 5W-40.
Viscosity classes with a high viscosity grade can increase fuel consumption.
Further information on suitable engine oil specifications and viscosity classes can be obtained from an authorised Service Partner another qualified Service Partner or a specialist workshop.
FAQs
The 2024 BMW 2 Series utilizes synthetic engine oil, recommended by the manufacturer for optimal performance.
According to BMW’s maintenance schedule, the engine oil in the 2024 BMW 2 Series should be changed every 10,000 miles or once a year, whichever comes first.
For the 2024 BMW 2 Series, the recommended oil viscosity is typically 0W-20 or 5W-30, depending on the specific engine variant.
While it is technically possible to use conventional engine oil, BMW strongly recommends using synthetic oil for optimal engine performance and longevity in the 2024 BMW 2 Series.
The oil capacity of the engine in the 2024 BMW 2 Series varies depending on the specific engine variant but generally falls within the range of 5 to 6.5 quarts.
BMW does not recommend the use of aftermarket oil additives in the 2024 BMW 2 Series. The synthetic oil already contains additives necessary for proper engine lubrication.
While high-mileage oil may be suitable for some older vehicles, it is not typically recommended for use in the 2024 BMW 2 Series, which benefits from the use of synthetic oil.
The 2024 BMW 2 Series typically uses automatic transmission fluid (ATF) specially formulated for BMW’s automatic transmissions.
The transmission fluid in the 2024 BMW 2 Series should be changed every 50,000 to 100,000 miles, depending on driving conditions.
BMW recommends using only genuine or approved aftermarket transmission fluid specifically designed for use in BMW vehicles to ensure proper performance and longevity of the transmission.
The 2024 BMW 2 Series typically requires a specific type of coolant recommended by BMW, which is usually a long-life ethylene glycol-based coolant.
BMW recommends flushing and replacing the coolant in the 2024 BMW 2 Series approximately every 2 to 3 years.
While distilled water can be used in emergencies, it is not recommended as a long-term coolant substitute in the 2024 BMW 2 Series. Coolant contains additives vital for corrosion protection and temperature regulation.
The 2024 BMW 2 Series typically uses a high-performance DOT 4 brake fluid recommended by BMW for optimal brake system performance.
BMW recommends flushing and replacing the brake fluid in the 2024 BMW 2 Series every 2 years, regardless of mileage, to ensure brake system integrity and performance.
It is not recommended to mix different brands of brake fluid in the 2024 BMW 2 Series, as this can compromise the integrity and performance of the brake system. Stick to the recommended fluid specified by BMW.
The 2024 BMW 2 Series typically uses a specific type of power steering fluid recommended by BMW, which is usually a synthetic hydraulic fluid.
Useful Links
View Full PDF: 2024 BMW 2 Series Owner’s Manual | Auto User Guide