2024 BMW 5 Series User Manual
The 2024 BMW 5 Series is the pinnacle of executive luxury and performance, a perfect marriage of sophistication and thrills. A mainstay of the BMW range, the 5 Series debuts for the new model year with a redesigned look that exudes sophistication and modernity. A variety of powerful engine options, including turbocharged powerplants, are hidden beneath its elegant façade to provide an exciting driving experience. Inside, the cabin is a work of art, with premium materials and state-of-the-art electronics, such as the newest infotainment and driver-aid systems. The executive sedan market is being redefined by the 2024 BMW 5 Series, which appeals to discriminating drivers who want powerful performance and elegant comfort for long-distance or daily travel.
Adjustment and operation
Seats, mirrors and steering wheel
Partly electrically adjustable seats
- Longitudinal direction
- Thigh support
- Backrest angle
- Height, seat angle
- Lumbar support
Electrically adjustable seats
- Lumbar support
- Height/longitudinal direction/seat angle 3 Backrest angle/head restraint
Adjusting the head restraint
Adjusting the height: manual head restraints
- Down: press the button and slide the head restraint downwards.
- Up: push the head restraint upwards.
After adjusting the height, make sure that the head restraint engages correctly.
Adjusting the height: electrical head restraints
Press the switch up or down.
Adjusting the distance
Press the button and push the head restraint forward or backward.
After adjusting the distance, make sure that the head restraint engages correctly.
Adjusting the exterior mirrors
Adjusting the steering wheel position
Electrical steering wheel adjustment Press the switch to adjust the steering wheel to the correct forward/back position and height for your seat position.
Manual steering wheel adjustment
- Fold the lever down fully.
- Grip the steering wheel with both hands and adjust it in the longitudinal direction and height of the seat position.
- Fold the lever back up.
Memory function
Principle
The memory function enables the following settings to be stored and retrieved when required:
- Seat position.
- Exterior mirror adjustment.
- Depending on the equipment: steering wheel position.
- Height of the Head-up display.
The memory buttons are on the front doors.
Storing settings
- Set the desired position.
- Press the button. The LED is illuminated.
- Press the desired Memory button 1 or 2 while the LED is illuminated. A signal sounds.
Go to Settings
Press the desired Memory button 1 or 2.
Infotainment
Navigation destination entry
- Navigation menu
- “Destination input”
A search field and entries such as the search history are displayed. - Select the desired entry or search field.
- If the search field has been selected, enter characters or select one of the displayed POI categories. If necessary, select OK to display further information, such as a preview map.
If necessary, accept the suggested search term. - Select the desired entry.
- “Start route guidance”
Entertainment
depending on the vehicle type, the following buttons are installed either in the centre console or instrument panel:
Using the mobile phone
General
Once the mobile phone has been connected in the vehicle, it can be operated using iDrive and the buttons on the steering wheel.
Activate Bluetooth® on the mobile phone.
Connecting via Bluetooth®
- Apps menu
- “All apps”
- “Mobile devices”
- “Connect new device”
Mobile phones in the range are displayed on the controlled display. - Select the required mobile phone.
- Compare the control number displayed on the controlled display with the control number in the display of the mobile phone and confirm that they match.
- If necessary, select the connection mode: “Use Bluetooth”
The device is connected and displayed in the device list.
Accepting a call
Depending on the equipment, incoming calls can be accepted in different ways.
- Via iDrive:
- “Accept”
- Press the button on the steering wheel.
- Use the knurled wheel on the steering wheel to select from the list in the instrument cluster: “Accept”
Dialling a number
- Communication menu
- “More”
- “Dial number”
- Enter the numbers.
- Select the icon. The call is made using the mobile phone to which the telephone function is assigned.
On the move Driving
Drive-ready state
Switching on drive-ready state
- Press the brake.
- Press the Start/Stop button.
Switching off drive-ready state
- With the vehicle at a standstill, apply the parking brake.
- Press the Start/Stop button.
- The engine is switched off.
- The vehicle changes to the standby state.
- The READY display is no longer illuminated and an acoustic signal is heard.
Automatic Start/Stop function
The Automatic Start/Stop function helps you to save fuel. It does this by switching off the engine when the vehicle stops, for example in congestion or at traffic lights. The drive-ready state remains switched on. For driving off, the engine starts automatically under the following conditions:
- By releasing the brake pedal.
- With Automatic Hold activated: press the accelerator pedal.
Steptronic transmission
Engaging selector lever positions D, N, R, S
- D Drive position.
- N Neutral.
- R Reverse gear.
- S Sports programme.
Keep the brake applied until ready to drive off, otherwise, the vehicle will move when drive position or reverse gear is selected. Only engage the selector lever position R when the vehicle is stationary. Sports programme: the shift characteristics are designed for sportier drivability.
Engaging selector lever position P
Press the key.
The transmission lock is engaged and the parking brake is engaged.
Parking brake
Applying the parking brake
Press the key. The LED on the button and the indicator light in the instrument cluster are illuminated. The parking brake is applied and the transmission lock is engaged.
Release the parking brake
Press the button with the selector lever position P and activate the drive-ready state. Press the button with the brake pedal depressed and the drive-ready state switched on. The LED and the indicator light go out. The parking brake is released.
Parking
Make sure the parking brake is engaged.
Light and vision
Turn indicator, high-beam headlight, headlight flasher
Turn indicators
- Flashing: press the lever past the resistance point.
- One-touch signalling: lightly tap the lever up or down.
- To indicate a turn briefly: press the lever as far as the resistance point and hold it there for as long as you wish to indicate a turn.
High-beam headlight, headlight flasherPress the lever forwards or pull it back.
- High-beam headlight on, arrow 1.
The high-beam headlight is illuminated when the low-beam headlight is switched on. - High-beam headlight off/headlight flasher, arrow 2.
Lights and lighting
Buttons in the vehicle
Functions via iDrive
Wiper system
Switching on the wiper system
Press the lever upwards to the desired position.
- Rest position of the windscreen wipers, position 0.
- Rain sensor, position 1.
- Normal wiper speed, position 2.
- Fast wiper speed, position 3.
Switching off the wiper system and flick wipingPress the lever downwards or forwards.
- To switch off: press the lever downwards, ar-row 1, until position 0 is reached.
- To flick wipe: press the lever downwards from position 0, arrow 1, and press the lever forwards from position 0 or position 1, arrow 2. The lever returns to position 0 when released.
Activating/deactivating the rain sensor
To activate: press the lever upwards once from position 0, arrow 1. To deactivate: press the lever back to position 0.
Adjusting the sensitivity of the rain sensorTurn the knurled wheel on the wiper lever.
Cleaning the windscreen
Air conditioning
Air conditioning functions
Functions in the air conditioning menu
Buttons, integrated automatic heating/air conditioning system
Automatic rear air conditioning system
After adjusting the tyre inflation pressure
If equipped with a Tyre Pressure Monitor, tyre inflation pressure corrections are applied automatically. Make sure that the tyre settings are correct. For tyres that are not listed in the tyre inflation pressure information on the control display, reset the Tyre Pressure Monitor.
If equipped with a Flat Tyre Monitor, reinitialize the Flat Tyre Monitor.
Sensors in the vehicle
Vehicle Equipment
This chapter describes equipment, systems and functions which are offered or may be offered in future on a model-specific basis, even if they are not included in the vehicle in question.
Overview
Depending on the equipment, the following cameras and sensors are installed in the vehi-cle:
- Front camera.
- Camera behind the windscreen.
- Exterior mirror cameras.
- Reversing Assist Camera.
- Front radar sensor.
- Side radar sensors, front.
- Side radar sensors, rear.
- Ultrasonic sensors in the front/rear bumpers.
- Side ultrasonic sensors.
System limits of the cameras
The function of the cameras can be restricted or may indicate something wrong, for example in the following situations:
- In thick fog, wet conditions or snow.
- On steep crests or dips or on tight bends.
- When the camera field of view is covered, for example by a fogged-up windscreen or stickers.
- If the camera lens is dirty or damaged.
- With the exterior mirrors folded in.
- With open doors or open luggage compartment.
- In the case of bright oncoming light or strong reflections, for example, if the sun is low in the sky.
- In the dark.
- The camera has overheated due to excessive temperatures and is temporarily turned off.
- During the camera calibration process immediately after vehicle delivery.
A Check Control message may be displayed if the system limits are reached.
Radar sensors
Safety information
WARNING
Due to external influences, e.g. interference, the radar sensors of the vehicle and thus also the driving assistance systems can be disturbed. There is a risk of an accident. Observe the traffic situation, be ready to take over steering and braking at any time, and actively intervene if the situation warrants it.
System limits of the radar sensors
The function of the radar sensors can be restricted or not available, for example in the following situations:
- If the sensors are contaminated.
- In the case of iced-up sensors.
- If the sensors are obscured, for example by stickers, foils or a number plate carrier.
- If the sensors are misaligned, for example, due to parking damage.
- If the radiation range of the sensors is covered, for example by protruding loads.
- When the field of view of the sensors is covered, for example by garage walls, hedges, snow hills, vehicles or trailers.
- After work was performed incorrectly on the vehicle paintwork near to the sensors.
- At steep crests or hollows of hills.
A Check Control message may be displayed if the system limits are reached.
System limits of the ultrasonic sensors
The physical limits of ultrasound measurement may be reached when detecting objects in situations involving the following, for example:
- If the sensors are dirty or covered, e.g. by stickers.
- If the sensors are misaligned, for example, due to parking damage.
- After work was performed incorrectly on the vehicle paintwork near to the sensors.
- Small children and animals.
- Persons wearing certain types of clothing, for example, a jacket.
- Obstacles and people at the edge of the driving lane.
- If there is external interference with the ultrasonic sound, for example by passing vehicles, loud machines or other ultrasonic sources.
- Certain weather conditions; for example, high air humidity, wet conditions, snowfall, cold, extreme heat or strong wind.
- For trailer towbars and tow hitches of other vehicles.
- Thin or wedge-shaped objects.
- Moving objects.
- Higher protruding objects, for example, projecting walls.
- Objects with corners, edges and smooth surfaces.
- For objects with fine surfaces or fine structures, for example, wire mesh fences.
- Objects with porous surfaces.
- Small and low objects such as boxes.
- Low objects already displayed, for example, kerbs, can be outside of the detection ranges of the sensors.
- Soft obstacles or obstacles covered in the foam material.
- Plants or shrubs.
- In washing bays and car washes.
- In the event of bumps, for example, speed bumps.
- If there are dense exhaust fumes.
- The ultrasonic sensors do not take into account loads projecting beyond the outline of the vehicle.
- If the cover of the trailer tow hitch is incor-rectly seated.
A Check Control message may be displayed if the system limits are reached.
FAQs
The release date for the 2024 BMW 5 Series may vary by region, but it is typically expected to be available in the latter half of 2023.
Key features may include various engine options, advanced technology, a refreshed design, and a luxurious interior.
The 2024 BMW 5 Series is expected to offer various engine options, including both four-cylinder and six-cylinder engines, with different power outputs.
Yes, BMW typically offers xDrive all-wheel drive options for the 5 Series to improve traction and stability.
BMW often releases M Performance variants for its models, so there might be an M Performance version of the 2024 5 Series with enhanced performance features.
The 2024 BMW 5 Series is likely to come equipped with advanced safety features like adaptive cruise control, lane departure warning, and autonomous emergency braking.
The starting price may vary depending on the specific model and trim, but it typically falls within the luxury executive sedan segment’s pricing range.
BMW has been expanding its electric and hybrid offerings, so there’s a possibility of hybrid or electric variants, but it depends on BMW’s product strategy.
The 2024 BMW 5 Series is likely to offer both automatic and manual transmission options, depending on the model and trim.
Fuel efficiency will vary depending on the engine choice, but BMW typically aims for competitive fuel economy in its class.
The 2024 BMW 5 Series is expected to be a luxury executive sedan that can comfortably seat up to five passengers.
Expect the 2024 BMW 5 Series to feature the latest iDrive infotainment system with touchscreen displays, smartphone integration, navigation, and more.
BMW typically offers performance packages or options to enhance handling, braking, and acceleration. These may be available for the 2024 model.
Warranty coverage typically includes a limited warranty, powertrain warranty, and complimentary maintenance for a specified period.
BMW typically offers a range of exterior and interior color options, allowing customers to personalize their 5 Series according to their preferences. Specific colors may vary by region.
Useful Link
Download Manuals: https://www.bmwusa.com/owners-manuals.html