2024 BMW X4 Owner’s Manual

2024 BMW X4 Owner’s Manual

The 2024 BMW X4 is an alluring blend of SUV adaptability and sports car agility that perfectly captures BMW’s commitment to providing a singular driving experience. This elegant little SUV has a redesigned look that is confident and contemporary. Beneath the eye-catching design, a range of powerful engine options—including turbocharged powertrains—guarantees an exciting and dynamic ride on every route. The 2024 X4’s tastefully designed inside beckons passengers with plush materials, cutting-edge technology, and plenty of comfort. The 2024 BMW X4 is a sporty and fashionable SUV that fulfils the needs of people who want a well-balanced combination of functionality and performance for their everyday travels.

Valet parking mode

Principle
The control display is disabled in valet parking mode. Operation via iDrive is no longer possi-ble. This mode can be used, for example, if the vehicle is to be handed over to a parking service.

General
In valet parking mode, the vehicle settings cannot be changed via iDrive. Personal settings cannot be changed. Personal data cannot be displayed.

In addition, the following actions are performed:

• The volume of the audio system is limited.
• The integrated universal remote control is deactivated.
• The Dynamic Stability Control cannot be turned off.

Operating requirements

• At least one driver profile has been created.
• A driver profile or a guest profile is active.
• A ConnectedDrive account is assigned to at least one driver profile.

Calling up the menu for valet parking mode

Via the shutdown display
The shutdown display is displayed after switching off the drive-ready state. Select the en-try for valet parking mode on the shutdown display.

Via the display bar at the top of the control display

1. Tilt the Controller up.
2. “Valet parking mode”

Via the vehicle settings

1. “CAR”
2. “Settings”
3. “General settings”
4. “Valet parking mode”

Activating valet parking mode

General
Before activating valet parking mode, a PIN must be defined so that valet parking mode can be deactivated later on. The procedure for entering a PIN varies depending on the active driver profile.

Driver profile with PIN
A PIN has been defined for the active driver profile.
It is not necessary to enter another PIN. “Activate now”

Driver profile without PIN
A PIN must be assigned to the driver profile.

1. “PIN”
2. Enter PIN.
3. “Activate now”

Guest profile
The active driver profile is the guest profile. A PIN must be entered.

1. “PIN”
2. Enter PIN.
3. “Activate now”
   This PIN can be used once to deactivate valet parking mode when the guest profile is active.

Deactivating valet parking mode

General
The lock display for valet parking mode is displayed on the control display. How valet parking mode is deactivated depends on which driver profile is selected on the lock display.

Driver profile with PIN
Regardless of which driver has activated valet parking mode, a driver can deactivate valet parking mode by entering his/her PIN.

1. Select a driver profile.
2. Enter the PIN assigned to the driver profile.

If you have forgotten the PIN, valet parking mode must be deactivated by entering the assigned ConnectedDrive login details.

Driver profile without PIN
The valet parking mode was activated by a different person. To deactivate valet parking mode, a driver without a PIN must enter the login details for his/her ConnectedDrive account.

1. Select a driver profile.
2. Enter the ConnectedDrive login details assigned to the driver profile.

Guest profile
It is only possible to deactivate valet parking mode in the guest profile if the mode was acti-vated in the guest profile.

1. Select the guest profile.
2. Enter the PIN that was set during activation.

If you have forgotten the PIN, valet parking mode must be deactivated via a personal driver profile.

Settings

General
Depending on the vehicle equipment and national-market version, various settings are possible for opening and closing. These settings are saved for the current driver profile.

Unlocking and locking

Doors

1. “CAR”
2. “Settings”
3. “Key button assignment”
4. Select the icon.
5. Select the desired setting:
   • “Driver’s door only”
     Only the driver’s door and fuel filler flap are unlocked. Pressing again unlocks the entire vehicle.
   • “All doors”
     The entire vehicle is unlocked.

Vehicle acknowledgement signals

1. “CAR”
2. “Settings”
3. “Doors/ vehicle access”
4. To deactivate or activate desired acknowledgement signals:
   • “Flash for lock/unlock”
     Unlocking is acknowledged by two flashes, locking by one flash.
   • With alarm system:
     “Acoustic signal for lock/unlock” Unlocking is acknowledged by two acoustic signals, locking by one acoustic signal.

Automatic folding of the mirrors

1. “CAR”
2. “Settings”
3. “Doors/ vehicle access”
4. “Fold mirrors in when locked”

Automatic unlocking

1. “CAR”
2. “Settings”
3. “Doors/ vehicle access”
4. “Unlock at end of the journey”
   After the drive-ready state has been switched off by pressing the Start/Stop button, the locked vehicle is automatically unlocked.

Automatic locking

1. “CAR”
2. “Settings”
3. “Doors/ vehicle access”
4. Select the desired setting:
   • Lock in a few minutes”
     The vehicle is automatically locked again after a short while if no doors are opened after unlocking.
   • Lock after pulling away”
     On driving off, the vehicle is locked automatically.

Tailgate and doors
Depending on the equipment and national-market version, this setting may not be available.

1. “CAR”
2. “Settings”
3. “Key button assignment”
4. Select the icon.
5. Select the desired setting:
   • “Tailgate”
     Depending on the equipment, the tailgate is unlocked or opened.
   • “Tailgate opens after unlocking”
     The vehicle must be unlocked before the tailgate can be operated with the vehicle key.
   • “Tailgate and door(s)”
     Depending on the equipment, the tailgate is unlocked or opened and the doors are unlocked.
   • “Lock tailgate button”
     Operation of the tailgate with the vehicle key is disabled.

Setting the opening height
It is possible to specify how far the tailgate should open. When setting the opening height, make sure that there is a clearance of at least 10 cm, 4 in above the tailgate.

1. “CAR”
2. “Settings”
3. “Doors/ vehicle access”
4. “Tailgate”
5. “Opening height”
6. Watch the tailgate and set the desired opening height.

Comfort Access

Contactless locking and unlocking
Contactless locking and unlocking can be switched on or off.

1. “CAR”
2. “Settings”
3. “Doors/ vehicle access”
4. “Comfort access”

Closing the glass sunroof automatically

1. “CAR”
2. “Settings”
3. “Doors/ vehicle access”
4. “Automatic roof closing”
   After locking, the open glass sunroof is au-tomatically moved to the raised position in the event of rain or after six hours.

Establishing a rest state after opening the front doors

1. “CAR”
2. “Settings”
3. “Doors/ vehicle access”
4. “Switch off after door opening”

Alarm system

Principle
The alarm system visually and acoustically signals when someone attempts to open the locked vehicle.

General
The alarm system responds to the following changes in a locked vehicle:

• A door, the bonnet or the tailgate is opened.
• Movements inside the vehicle interior.
• A change in the vehicle’s angle of inclination, for instance, if an attempt is made to jack it up and steal the wheels or to raise it prior to towing away.
• An interruption in the battery voltage.
• Improper use of the diagnostic socket.
• Locking the vehicle while a device is con-nected to the on-board diagnostic socket.

The alarm system indicates these changes visually and audibly:

• Acoustic alarm:
  Depending on local regulations, the acoustic alarm may be suppressed.
• Optical alarm:
  By flashing the hazard warning lights and, if applicable, the headlights.

To safeguard the operation of the alarm system, do not modify the system.

Switching on/off
The alarm system is switched off/on as soon as the vehicle is unlocked/locked with the vehi-cle key or using Comfort Access.

Opening the doors when the alarm system is switched on
The alarm system is triggered when a door is opened if it has been unlocked via the door lock using the integrated key.

Opening the tailgate with the alarm system switched on
The tailgate can be opened even with the alarm system switched on.
When re-closed, the tailgate is locked and monitored again provided that the doors are locked. The hazard warning lights flash once.

Indicator light on the interior mirror

• The indicator light flashes every 2 seconds: The alarm system is switched on.
• The indicator light flashes for approximately 10 seconds then switches to flashing every 2 seconds:
• The interior movement detector and tilt alarm sensor are not active because the doors, bonnet or tailgate are not closed correctly. Correctly closed access points are secured.
• Once the remaining open access points have been closed, the interior movement detector and tilt alarm sensor are switched on.
• The indicator light extinguishes after the vehicle has been unlocked: This means that the vehicle is not being tampered with.
• The indicator light flashes after unlocking until the drive-ready state is switched on, but for no longer than approximately 5 minutes: The alarm has been triggered.

Tilt alarm sensor
The vehicle’s angle of inclination is monitored.
The alarm system responds, for example when there is an attempt to steal a wheel or tow the vehicle away.

Interior movement detector
The vehicle interior is monitored. The alarm system responds when movement is detected in the vehicle interior. To ensure perfect functioning, the windows and glass sunroof must be closed.

Avoiding false warnings General
The tilt alarm sensor and the interior movement detector may trigger an alarm even though no unauthorised activity is taking place.
Situations where false warnings may occur:

• In washing bays or car washes.
• In two-level garages.
• When transporting the vehicle via motorail, car ferry or trailer.
• When there are pets in the vehicle.
• When the vehicle is locked after starting to refuel.

The tilt alarm sensor and interior movement detector can be switched off for such situations.

Switching off the tilt alarm sensor and interior movement detector
Within 10 seconds of locking the vehicle, press the button on the vehicle key. The indicator light illuminates for approxi-mately 2 seconds and then flashes again. The tilt alarm sensor and the interior movement detector are switched off until the next time the vehicle is locked.

Ending the alarm

• Unlock the vehicle with the vehicle key.
• Unlock the vehicle with the integrated key and switch on the drive-ready state using the emergency detection of the vehicle key.
• With Comfort Access: fully grip the door handle of the driver’s or front passenger door while carrying the vehicle key.

Window lifters

General
The windows can be opened and closed from the outside with the vehicle key. With Comfort Access: The windows can be closed from outside using Comfort Access. If a window is often opened in the same location, this task can be carried out by the BMW Intelligent Personal Assistant. For example, if you often use the same multi-storey car park.

Closing with no anti-trap mechanism
If an external hazard or ice prevents normal closure, proceed as follows:

1. Pull the switch past the resistance point and hold it in this position.
   The window is closed but with the restricted anti-trap mechanism. If the closing force exceeds a certain level, the closing operation is interrupted.
2. Pull the switch past the resistance point again within approximately 4 seconds and hold it in this position. The window is closed with no anti-trap mechanism.

Safety switch

Principle
The safety switch can be used to prevent children from opening and closing the rear windows with the switches in the rear, for example. If an accident of appropriate severity occurs, the safety function is automatically switched off.

FAQs

Useful Link

Download Manuals: https://www.bmwusa.com/owners-manuals.html

BMW X6 2022-2023 User Manual