2024 BMW X6 Owner’s Manual
The 2024 BMW X6 is a daring representation of the brand’s dedication to fusing SUV adaptability with dynamic performance. This luxurious midsize SUV coupe exudes exclusivity and modernity with its unique and updated design. A variety of powerful engine options, including powerful turbocharged versions, under the hood, ensure an exciting and dynamic driving experience. The carefully designed interior of the 2024 X6 has premium materials and cutting-edge technology, creating a comfortable and connected refuge. The 2024 BMW X6 is a unique and athletic SUV that meets the needs of drivers who want performance and a unique look for their everyday escapades.
Seats, mirrors and steering wheel
Vehicle equipment
This chapter describes equipment, systems and functions which are offered or may be offered in future on a model-specific basis, even if they are not included in the vehicle in question.
Safe seating position
A seat position that suitably meets the needs of the occupants is essential for relaxed driving with minimum fatigue. In an accident, the correct seat position plays an important role. Pay attention to the notes in the following chapters.
Seats
Safety information
WARNING
Setting the seat during a journey could cause the seat to move unexpectedly. You could lose control of the vehicle. There is a risk of an accident. Only adjust the seat on the driver’s side when at a standstill. If the backrest is angled too far back, the protective effect of the seat belt will no longer be guaranteed. There is a risk of sliding under the seat belt in the event of an accident. There is a danger of injury or danger to life. Adjust the seat before starting the journey. Adjust the backrest to the most upright position possible, and do not change it during the journey. There is a risk of entrapment when the seats are moved. There is a danger of injury or material damage. Before making any adjustments, make sure that the movement range of the seat is clear.
Adjusting the seats
General
The current seat position can be saved using the memory function.
Overview
The switches for the seat settings are located at the front seats.
Adjusting the forward/back position
Press the switch forward or backward.
Adjusting the height
Press the switch up or down.
Adjusting the seat angle
Tilt the switch up or down.
Adjusting the backrest angle
Tilt the switch forwards or backwards.
Adjusting the seat position automatically
General
The seat setting for the driver’s seat is stored in the active BMW ID or in the active driver profile. If the BMW ID or the driver profile is reactivated at a later time, the stored position is loaded automatically.
Activating/deactivating the function
- Apps menu
- “Vehicle apps”
- “Seat comfort”
- Select the driver’s seat.
- “Set automatically”
- Select the desired setting.
Thigh support
Sport seat
Pull the lever on the front of the seat and adjust the thigh support forwards or backwards.
Multifunction seat
Press the switch forwards or backward.
Lumbar support Principle
The curvature of the backrest can be changed to provide support for the lumbar region, or lordosis. The upper edge of the pelvis and the spinal column are supported to encourage an upright sitting posture.
Adjusting the lumbar support
- Press the button at the front/rear: The curvature is increased/decreased.
- Press the button at the top/bottom:
- The curvature is shifted upwards/downwards.
Backrest width
Principle
The backrest width can be adjusted to improve lateral support when cornering.
General
The backrest width is changed by adjusting the side sections of the backrest.
Adjusting the backrest width
- Press the button at the front: Backrest width is reduced.
- Press the button at the rear: Backrest width is increased.
Backrest upper section
Principle
The backrest upper section provides support for the back in the shoulder region. When adjusted correctly, it ensures a relaxed seat position and reduces strain on the shoulder muscles.
General
When getting out of the vehicle, the backrest upper section moves all the way back. Before the start of the journey, the last set position is automatically moved.
Adjusting the backrest upper section
- Press the button at the front:
The backrest upper section is tilted forward. - Press the button at the rear:
The backrest upper section is tilted backwards.
Front passenger seat functionality
Principle
The front passenger seat can be adjusted using the switches on the driver’s seat, for example, to increase the legroom in the rear. If necessary, the front passenger seat position can be saved using the memory function.
Overview
Buttons in the vehicle
Front passenger seat functionality
Switching on
- Press the button. The LED is illuminated.
- Use the driver’s seat switches to adjust the front passenger seat.
- If required, save the memory position for the front passenger seat position.
Switching off
Press the key. The LED is extinguished. The function is also disabled automati-cally after a period of time.
Seat massage Principle
The seat massage ensures relaxed muscles and better blood circulation in the back region and can prevent signs of fatigue.
General
Eight different massage programmes can be selected:
- Pelvic activation.
- Upper-body activation.
- Whole body mobilisation.
- Back massage.
- Shoulder massage.
- Lumbar massage.
- Upper-body training.
- Whole body exercise.
Overview
Buttons in the vehicleMassage function
Switching on
Press the button once for each intensity level. The highest intensity level is selected if the three LEDs are illuminated.
Switching off
Press and hold the button until the LEDs are extinguished.
Selecting the massage programme
- Apps menu
- “Vehicle apps”
- “Seat comfort”
- Select the desired seat.
- “Seat massage”
- Select the desired setting.
Calibrating the front seats
General
As soon as the electric seat adjustment no lon-ger functions precisely, a Check Control mes-sage is displayed on the controlled display. To restore the accuracy of the electric seat setting, the front seats must be calibrated.
WARNING
There is a risk of entrapment when the seats are moved. There is a danger of injury or material damage. Before making any adjustments, make sure that the movement range of the seat is clear.
Calibrating the front seat
- Push the switch forward again in a longitudinal direction until the seat stops.
- Push the switch forward again until the seat stops.
- Reset the desired seat position.
As soon as the message on the control display disappears, the calibration is complete. If the message remains active, repeat the calibration. If the message is not hidden after repeated calibration, have the system checked by an authorised Service Partner another qualified Service Partner or a specialist workshop.
Seat belts
General
For the safety of the vehicle occupants, the vehicle is equipped with five seat belts. However, they can only provide a protective effect when applied correctly. Before each journey, always make sure that all occupants have fastened their seat belts. The airbags supplement the seat belts as an additional safety device. The airbags are not a substitute for the seat belts. All belt anchorages are designed to achieve the best possible protective effect of the seat belts with proper use of the seat belts and correct seat settings. The two outer seat belt buckles on the rear seats are intended for those sitting on the left and right. The inner seat belt buckle on the rear seats is intended for the person sitting in the middle.
WARNING
If a seat belt is used by more than one person at the same time, the protective effect of the seat belt is no longer guaranteed. There is a danger of injury or danger to life. Only one person should use each seat belt at any one time. Do not allow infants and children to travel on the lap of another occupant. Instead, secure the infant or child in child restraint systems intended for this purpose. Seat belts should be adjusted as firmly as possible, consistent with comfort, to provide the protection for which they have been designed. A slack seat belt will greatly reduce the protection afforded to the wearer. Care should be taken to avoid contamination of the seat belt strap by polishes, oils and chemicals and particularly battery acid. Cleaning may safely be carried out using a mild soap and water solution. The seat belt should be replaced if the seat belt strap becomes frayed, contaminated or damaged. Seat belts should not be worn with straps twisted. Each seat belt assembly must only be used by one occupant; it is forbidden to put a belt around a child being carried on the occupant’s lap. It is essential to replace the entire seat belt assembly after it has been worn in a severe impact even if damage to the assembly is not obvious. No modifications or additions should be made by the user that will either prevent the seat belt adjusting devices from operating to remove slack or prevent the seat belt assembly from being adjusted to remove slack. If the rear seat backrest is not locked, the protective effect of the middle seat belt is not ensured. There is a danger of injury or danger to life. Lock the wider rear seat backrest when using the middle seat belt. The protective effect of the seat belts may be restricted or may even fail completely in the following situations:
- If the seat belts or seat belt buckles are damaged, dirty or have been modified in another way.
- The seat belt tensioners or belt retractors have been modified.
Seat belts can be damaged in an accident without the damage necessarily being apparent. There is a danger of injury or danger to life. Do not modify seat belts, seat belt buckles, seat belt tensioners, belt retractors and belt anchor points and ensure that they are kept clean. After an accident, have the seat belts inspected by an Authorised Service Partner another qualified Service Partner or a specialist workshop.
Correct seat belt use
- Place the seat belt tightly over the pelvis and shoulder, close to the body and without twisting.
- Make sure that the seat belt is positioned low at the hips in the area of the pelvis. The seat belt must not be pressed on the abdomen.
- The seat belt must not be allowed to rub against sharp edges, be routed over solid or breakable objects or be trapped.
- Avoid wearing bulky clothing.
- Keep the seat belt taut by occasionally pulling upwards on the upper body area.
Setting for automatic retracting seat belts
- Draw the seat belt tongue attached to the seat belt across the body and press it into the seat belt buckle until a ‘click’ is heard.
- Adjustment of the belt length is very important. To adjust the lap belt and check whether the seat belt buckle has locked correctly, pull upwards on the shoulder strap until the lap belt fits tightly.
- The length of the diagonal shoulder strap adjusts itself automatically to allow freedom of movement.
- To release the seat belt, press the button on the seat belt buckle.
Fastening the seat belt
- When fastening the seat belt, guide it slowly over the shoulder and pelvis.
- Insert the seat belt tongue in the seat belt buckle. The seat belt buckle must be heard to engage.
Unfastening the seat belt
- Hold the seat belt firmly.
- Press the red button on the seat belt buckle.
- Guide the seat belt back up to the auto-matic reel.
FAQs
The release date for the 2024 BMW X6 may vary by region, but it is typically expected to be available in the latter half of 2023.
Key features may include various engine options, advanced technology, a refreshed design, and a luxurious and sporty interior.
The 2024 BMW X6 is expected to offer various engine options, including both gasoline and potentially hybrid or electrified powertrains, catering to different preferences and performance levels.
Yes, BMW typically offers xDrive all-wheel drive options for the X6 to enhance traction and stability, especially in adverse weather conditions.
BMW often releases M Performance variants for its models, so there may be an M Performance version of the 2024 X6 with enhanced performance features.
The 2024 BMW X6 is likely to come equipped with advanced safety features, including adaptive cruise control, lane-keeping assist, autonomous emergency braking, and more.
The starting price may vary depending on the specific model and trim, but it typically falls within the luxury midsize SUV segment’s pricing range.
BMW has been expanding its electric and hybrid offerings, so it’s possible that hybrid or electric variants may be available, but it depends on BMW’s product strategy.
The 2024 BMW X6 is likely to offer an automatic transmission, potentially with multiple gears, to ensure smooth and efficient power delivery.
Fuel efficiency will vary depending on the engine choice, but BMW typically aims to provide competitive fuel economy for a vehicle in this class.
The 2024 BMW X6 is expected to be a luxury midsize SUV coupe capable of comfortably seating up to five passengers.
Expect the 2024 BMW X6 to feature the latest iDrive infotainment system with touchscreen displays, premium sound systems, smartphone integration, navigation, and more.
BMW typically offers performance packages or options that enhance handling, braking, and acceleration. These may be available for the 2024 model.
Warranty coverage typically includes a limited warranty, powertrain warranty, and complimentary maintenance for a specified period, although details may vary by region.
BMW typically offers a range of exterior and interior colour options, allowing customers to personalize their X6 according to their preferences. Specific colours may vary by region.
Useful Link
Download Manuals: https://www.bmwusa.com/owners-manuals.html