Dashboard Indicators: 2024 BMW X4 Warning Lights Guide
The dashboard of the 2024 BMW X4 has a complex set of warning lights and indicators that are meant to keep drivers informed about different parts of the car’s condition. These lights show many things, like how the engine is running, how safe the car is, and general information about the car. Some common warning lights are those for engine problems, low oil pressure, low battery power, and problems with the brake system. There are also safety indicators like ABS (Anti-Lock Braking System), airbag status, and traction control to make sure the driver is informed of important safety features. It is important for drivers to become familiar with these dashboard signs and act quickly on any illuminated warnings to keep the vehicle running at its best, stay safe, and avoid problems.
2024 BMW X4 M Review, Specs, Price And Mileage (Brochure)
Indicator and warning lights
Principle
Indicator and warning lights in the instrument cluster show the status of some functions in the vehicle and indicate any malfunctions in monitored systems.
General
- Indicator and warning lights can illuminate in a variety of combinations and colours.
- When switching on the drive-ready state, the functionality of some lights is checked and they illuminate briefly.
Red lights
Seat belt warning
Indicator light illuminates in the following situations:
- The driver’s side seat belt is not fastened.
- Depending on the national-market version: the passenger seat belt is not fastened.
- Depending on the national-market version: objects are detected on the front passenger seat.
- The seat belt on the corresponding rear seat is not fastened.
Check whether the seat belt has been fastened correctly.
Rear seat belt warning: seat detection
- Seat belt on the corresponding rear seat is not fastened.
Airbag system
The warning light is illuminated briefly: this indicates that the entire airbag system and seat belt tensioners are operational when the vehicle is switched on.
The warning light does not illuminate or illuminates continuously: The airbag system or belt tensioners may not be functioning. Have the vehicle checked immediately by an authorised Service Partner or another qualified Service Partner or a specialist workshop.
For further information
- Airbags.
Parking brake
- The parking brake is engaged.
For further information
- To release the parking brake.
Brake system
- The brake linings are worn or there is a fault in the brake system.
- The braking force assistance may be not functional. A higher pedal force may be required during braking.
- Have the vehicle checked immediately by an authorised Service Partner or another qualified Service Partner or a specialist workshop.
When equipped with the Emergency Stop Assistant
- Emergency Stop Assistant has triggered.
For further information
- Emergency Stop Assistant.
Risk of collision
The warning light is illuminated or flashes in conjunction with an acoustic signal if a collision is imminent.
For further information:
- Crossroads Warning with city braking function.
- Pedestrian Warning with city braking function.
Collision Warning with braking function
- Warning light illuminates: risk of collision, e.g., with a vehicle, has been detected. Increased awareness is required.
- Warning light flashes and signal sounds: risk of impending collision with a vehicle has been detected.
- Immediately start braking or an avoidance manoeuvre.
For further information
- Collision Warning with braking function.
Crossroads Warning: vehicle detected from the right
- Warning light illuminates: risk of collision with a vehicle crossing from the right has been detected. Increased awareness is required.
- Warning light flashes and signal sounds: risk of impending collision with a crossing vehicle has been detected. Immediately start braking or an avoidance manoeuvre.
For further information
- Crossroads Warning with city braking function.
Crossroads Warning: vehicle detected from left
- Warning light illuminates: risk of collision with a vehicle crossing from the left has been detected. Increased awareness is required.
- Warning light flashes and signal sounds: risk of impending collision with a crossing vehicle has been detected. Immediately start braking or an avoidance manoeuvre.
For further information
- Crossroads Warning with city braking function.
Pedestrian Warning with City Braking Function
- Warning light illuminates and signal sounds: risk of impending collision with a person, e.g., pedestrian or cyclist, has been detected. Immediately start braking or an avoidance manoeuvre.
For further information
- Pedestrian Warning with city braking function.
Active Cruise Control with Stop&Go function
- Warning light flashes and an acoustic signal sounds: brake and perform avoidance manoeuvre, if necessary.
For further information:
- Active Cruise Control with Stop&Go function.
Steering and Lane Control Assistant
- Depending on the equipment and national-market version: the warning light flashes or is illuminated.
- A signal sounds: the system is switched off.
For further information:
- Steering and Lane Control Assistant.
Steering and Lane Control Assistant: hands not on the steering wheel
The warning light is illuminated and a signal sounds:
- Hands are not holding the steering wheel. A system interruption is imminent.
- The system reduces the speed to a standstill if applicable.
- The system may possibly not perform any supporting steering wheel movements.
- Grab the steering wheel with your hands.
For further information
- Steering and Lane Control Assistant.
Drive power
- Reduced drive power due to overheated drivetrain.
For further information
- Power display.
2024 BMW X4 M Review, Specs, Price And Mileage (Brochure)
Yellow lights
Anti-lock Braking System
- There is a malfunction or the system is faulty. The Anti-lock Braking System (ABS) is not available.
- Ease of steering may be restricted during full braking.
Have the vehicle checked immediately by an authorised Service - Partner or another qualified Service Partner or a specialist workshop.
For further information
- Anti-lock Braking System (ABS).
Brake system
- The brake linings are worn or there is a fault in the brake system.
- Have the system checked by an authorised Service Partner or another qualified Service Partner or a specialist workshop.
Steering and Lane Control Assistant
- Warning light is illuminated and an acoustic signal may sound: a system interruption is imminent.
- The warning light flashes: a lane boundary has been crossed.
For further information:
- Steering and Lane Control Assistant.
Steering and Lane Control Assistant: hands not on the steering
- wheel Hands are not holding the steering wheel. The system remains active.
- Grab the steering wheel with your hands.
For further information
- Steering and Lane Control Assistant.
Dynamic Stability Control
- Warning light flashes: Dynamic Stability Control regulates the driving power and brake forces. The vehicle is being stabilised.
- Reduce speed and adjust the driving style to the road conditions.
- The warning light is illuminated: Dynamic Stability Control has failed or is being initialised. Driving stability is restricted or has failed.
- If the warning light is continuously illuminated, have the system checked immediately by an authorised Service Partner or another qualified Service Partner or a specialist workshop.
For further information
- Dynamic Stability Control.
Dynamic Stability Control deactivated or Dynamic Traction Control activated
Dynamic Stability Control is deactivated or Dynamic Traction Control is activated.
For further information:
- Dynamic Stability Control.
- Dynamic Traction Control.
Flat tyre monitor
- The warning lamp lights up: flat tyre or tyre pressure loss has been detected.
- Reduce your speed and carefully stop the vehicle. Avoid heavy braking and sudden steering manoeuvres.
For further information:
- Flat Tyre Monitor.
Tyre Pressure Monitor
The warning lamp lights up: flat tyre or tyre pressure loss has been detected.
Note the information in the Check Control message.
Warning light flashes and is then illuminated continuously: the system is unable to detect flat tyres or tyre pressure losses.
- Fault due to systems or devices with the same radio frequency: the system is automatically reactivated upon leaving the field of interference.
- For tyres with special approval: the Tyre Pressure Monitor was unable to complete the reset. Reset the system again.
- Wheel without wheel electronics is fitted: if necessary have it checked by an authorised Service Partner or another qualified Service Partner or a specialist workshop.
- Malfunction: have the system checked by an authorised Service Partner or another qualified Service Partner or a specialist workshop.
For further information:
- Tyre Pressure Monitor.
Steering system
- The steering system may be faulty.
- Have the system checked by an authorised Service Partner or another qualified Service Partner or a specialist workshop.
Engine warning light
- When the warning light flashes:
- There is an engine fault which could damage the catalytic converter.
- Have the vehicle checked immediately.
- When warning light illuminates:
- Emission levels have deteriorated.
- Have the vehicle checked as soon as possible.
Have the vehicle checked by an authorised Service Partner or another qualified Service Partner or a specialist workshop.
Collision warning restricted or failed
Depending on the equipment and national-market version: functional limitations are detected, e.g. due to system limitations of the camera or system failure. It is possible to continue driving. Where applicable, observe the information from Check Control messages.
For further information:
- Collision Warning with braking function.
- Crossroads Warning with city braking function
- Pedestrian Warning with city braking function.
Collision warning restricted or failed
Depending on the equipment and national-market version: functional limitations are detected, e.g. due to system limitations of the camera or system failure. It is possible to continue driving. Where applicable, observe the information from Check Control messages.
For further information:
- Collision Warning with braking function.
- Crossroads Warning with city braking function.
- Pedestrian Warning with city braking function.
The collision warning switched off
- Depending on the vehicle equipment and national-market version: the system is switched off.
For further information:
- Collision Warning with braking function.
- Crossroads Warning with city braking function.
- Pedestrian Warning with city braking function.
The collision warning switched off
- Depending on the vehicle equipment and national-market version: the system is switched off.
For further information:
- Collision Warning with braking function.
- Crossroads Warning with city braking function.
- Pedestrian Warning with city braking function.
Lane Departure Warning
Depending on equipment and national version:
- The warning light is illuminated: functional limitation detected, for example, due to low sun or system failure. It is possible to continue driving. Where applicable, observe the information from Check Control messages.
- Warning light flashes: a warning is issued actively.
- The system does not carry out any steering interventions.
For further information
- Lane Departure Warning.
Rear fog light
- Rear fog light is switched on.
For further information
- Rear fog light.
Green lights
Rear seats: seat belt fastened
- Seat belt on the corresponding rear seat is fastened.
Rear seats: seat detection
- Seat belt on the corresponding rear seat is fastened.
Turn indicators
- The turn indicator is switched on.
- If the indicator light flashes more rapidly than usual, a turn indicator bulb has failed.
For further information:
- Turn indicators.
Sidelights
- The side lights are switched on.
For further information:
- Side lights/low-beam headlight.
Low-beam headlight
- The low-beam headlight is switched on.
For further information:
- Side lights/low-beam headlight.
Lane Departure Warning
Depending on equipment and national version:
- Indicator light flashes: a warning is issued actively. If necessary, the system performs a steering intervention.
For further information:
- Lane Departure Warning.
High-beam Assistant
- High-beam Assistant is switched on.
- The high-beam headlight is switched on and off automatically according to traffic situation.
For further information:
- High-beam Assistant.
Automatic Hold: the vehicle is held automatically
- Steptronic transmission: Automatic Hold is activated. The vehicle is held automatically when at a standstill.
For further information:
- Driving.
Automatic Hold: vehicle secured against rolling away
- Steptronic transmission: After the brake is applied, the vehicle is prevented from rolling away.
For further information:
- Driving.
Manual Speed Limiter
- Indicator light illuminates: the system is switched on.
- The indicator light flashes: set speed limit is exceeded.
For further information:
- Manual Speed Limiter.
Depending on the equipment: Cruise Control
- The system is active.
For further information:
- Driver assistance systems, Cruise Control,.
Active Cruise Control with Stop&Go function switched on
- The system is switched on.
For further information:
- Active Cruise Control with Stop&Go function.
Active Cruise Control with Stop&Go function: vehicle in front
- Indicator light illuminates: system has detected a vehicle ahead. The vehicle symbol goes out if no vehicle in front is detected.
- Indicator light flashing: The vehicle in front has driven off.
For further information:
- Active Cruise Control with Stop&Go function.
Speed Limit Assist activated
Depending on vehicle equipment, the indicator light illuminates together with the icon for the Cruise Control System: Speed Limit Assist is enabled and detected speed limits can be applied manually for the displayed system.
For further information:
- Speed Limit Assist.
Speed Limit Assist: applying speed limit
- The detected speed limit can be applied with the SET button. As soon as the speed limit has been adopted, a green tick is displayed.
For further information:
- Speed Limit Assist.
Steering and Lane Control Assistant
- The system is helping the driver keep the vehicle in the driving lane.
For further information:
- Steering and Lane Control Assistant.
Lane Change Assistant: lane change in progress
- Green arrow symbol for lane-changing: the system is carrying out a lane change.
For further information:
- Lane Change Assistant.
Lane Change Assistant Lane: lane change not possible
- Grey line for lane boundary on the appropriate side: the system has detected the lane change request. Lane change not currently possible.
For further information:
- Lane Change Assistant.
Lane Change Assistant: functional requirements not met
Depending on the national-market version:
- Grey arrow symbol for lane-changing: lane change not possible; operating requirements not met.
For further information:
- Lane Change Assistant.
Assisted Driving Mode Plus
- The system is active.
For further information:
- Assisted Driving Mode Plus.
Assisted Driving Mode Plus
- Alternative display, depending on equipment.
- The system is active.
For further information:
- Assisted Driving Mode Plus.
Blue lights
High-beam headlight
- The high-beam headlight has been switched on.
For further information:
- High-beam headlight.
Drive power
Reduced drive power due to cold drivetrain.
For further information:
- Power display.
Grey lights
Manual Speed Limiter
- The system is interrupted.
For further information:
- Manual Speed Limiter.
Depending on the equipment: Cruise Control
- The system is interrupted.
For further information:
- Driver assistance systems, Cruise Control.
Active Cruise Control with Stop&Go function
- Indicator light illuminates: the system is interrupted.
- Indicator light flashes: the requirements for the operation of the system are no longer being met. The system has been deactivated but will continue to brake until you actively take over by depressing the brake or accelerator pedal.
For further information:
- Active Cruise Control with Stop&Go function.
Steering and Lane Control Assistant
- System is on standby and does not make any steering wheel movement.
- The system activates automatically when all operating requirements are met.
For further information:
- Steering and Lane Control Assistant.
Assisted Driving Mode Plus
- The system is interrupted and activates automatically as soon as all functional requirements are met.
For further information:
- Assisted Driving Mode Plus.
Lane Departure Warning
Depending on the equipment and national version:
- The warning light is illuminated: the system is switched off or automatically deactivated, for example, because DSC OFF is activated.
- Warning light flashes: a warning is issued actively.
- The system does not carry out any steering interventions.
For further information:
- Lane Departure Warning.
White lights
Active Cruise Control with Stop&Go function
- No display of distance control as the accelerator pedal is being pressed.
For further information:
- Active Cruise Control with Stop&Go function.
Assisted Driving Mode Plus
- The system is ready.
For further information:
- Assisted Driving Mode Plus.
FAQs
Dashboard indicators provide crucial information about various aspects of the vehicle’s performance and status.
The 2024 BMW X4 features a range of warning lights, each designed to alert drivers to specific issues or conditions.
The check engine light signals potential issues with the engine or emissions system, prompting drivers to seek professional diagnosis and repair.
The tire pressure monitoring system (TPMS) alerts drivers when tire pressure is below the recommended level, promoting optimal safety and performance.
The brake system warning light suggests potential issues with the braking system. Immediate inspection is advisable for safety.
The battery warning light indicates potential issues with the charging system. Prompt inspection is recommended to prevent unexpected breakdowns.
Yes, an airbag warning light alerts to potential airbag system issues. Immediate attention is crucial for safety; consult a professional technician.
The oil can symbol typically indicates low oil pressure. It requires immediate attention to prevent engine damage. Check oil levels and consult a professional.
This warning light typically signals issues with traction control or stability control systems. Have the vehicle inspected to ensure optimal safety.
The ABS warning light illuminates to indicate potential issues with the anti-lock braking system. Professional diagnosis is recommended for safe driving.
The engine temperature warning light signals engine overheating. Pull over, turn off the engine, and seek professional assistance to avoid serious damage.
Useful Link
View Full PDF: 2024 BMW X4 | Auto User Guide