2024 Buick Envista Fuses and Fuse Box | How to replacing fuses
The fuses and fuse box of the 2024 Buick Envista are vital protectors of the vehicle’s electrical system, guaranteeing dependability and safety while driving. Typically positioned in the engine compartment or beneath the dashboard, the fuse box holds an assortment of fuses with varied amperage ratings. These fuses are essential for protecting the electrical systems of the car from overloads, short circuits, and other electrical problems. A fuse will blow in a circuit when it draws too much current, protecting the linked part from harm. The fuse box of the 2024 Buick Envista makes it easier to diagnose and fix electrical problems while maintaining the smooth operation of other car systems, which ultimately improves performance and safety for a worry-free driving experience.
2024 Buick Envista Specs, Price, Features, Mileage and Review
Electrical System
Electrical System Overload
The vehicle has fuses and circuit breakers to protect against an electrical system overload. When the current electrical load is too heavy, the circuit breaker opens and closes, protecting the circuit until the current load returns to normal or the problem is fixed. This greatly reduces the chance of circuit overload and fire caused by electrical problems. Fuses and circuit breakers protect power devices in the vehicle. If there is a problem on the road and a fuse needs to be replaced, the same amperage fuse can be borrowed. To check a fuse, look at the band inside the fuse. If the band is broken or melted, replace the fuse. Be sure to replace a bad fuse with a fuse of the identical size and rating.
Replacing a Blown Fuse
- Turn off the vehicle.
- Locate the fuse puller in the engine compartment fuse block.
- Use the fuse puller to remove the fuse from the top or side.
- If the fuse must be replaced immediately, borrow a replacement fuse with the same amperage from the fuse block. Choose a vehicle feature that is not needed to safely operate the vehicle.
- Insert the replacement fuse into the empty slot of the blown fuse.
At the next opportunity, see your dealer to replace the blown fuse.
Headlamp Wiring
An electrical overload may cause the lamps to go on and off, or in some cases to remain off. Have the headlamp wiring checked right away if the lamps go on and off or remain off.
Windshield Wipers
If the wiper motor overheats due to heavy snow or ice, the windshield wipers will stop until the motor cools and will then restart. Although the circuit is protected from electrical overload, overload due to heavy snow or ice may cause wiper linkage damage. Always clear ice and heavy snow from the windshield before using the windshield wipers. If the overload is caused by an electrical problem and not snow or ice, be sure to get it fixed.
Fuses and Circuit Breakers
The wiring circuits in the vehicle are protected from short circuits by a combination of fuses and circuit breakers. This greatly reduces the chance of damage caused by electrical problems.
Danger
Fuses and circuit breakers are marked with their ampere rating. Do not exceed the specified amperage rating when replacing fuses and circuit breakers. Use of an oversized fuse or circuit breaker can result in a vehicle fire. You and others could be seriously injured or killed.
Warning
Installation or use of fuses that do not meet GM’s original fuse specifications is dangerous. The fuses could fail, and result in a fire. You or others could be injured or killed, and the vehicle could be damaged.
Engine Compartment Fuse BlockTo remove the fuse block cover, squeeze the clip and lift it up.
Caution
Spilling liquid on any electrical component on the vehicle may damage it. Always keep the covers on any electrical component.
The vehicle may not be equipped with all of the fuses, relays, and features shown.
2024 Buick Envista Specs, Price, Features, Mileage and Review
Micro Fuses Usage
- F01 L/GATE RELEASE
- F02 A/C CLUTCH
- F06 HTD OSRVM
- F08 HORN
- F10 –
- F11 ECM PT_1
- F12 IGNITION COIL
- F13 ENG COMPONENT_2
- F14 ENG COMPONENT_1
- F15 ECM PT_2
- F16 N/A
- F17 N/A
- F18 RVC
- F19 ECM BATT
- F20 AUX WATER PUMP
- F21 PEPS
- F24 HTD/SEAT_1
- F25 HTD/SEAT_2
- F28 CAC SHUTTER
- F29 –
- F31 FTZM
- F32 TCM BATT
- F34 ESCL RUN/CRANK
- F35 –
- F36 –
- F37 ECM TCM RUN/CRANK
- F40 –
- F41 HDLP LEVELING
- F42 CLUSTER
- F44 WASH PUMP
- F45 –
- F46 –
- F47 CNSTR VENT SOL
- F48 –
- F49 REAR WIPER PARK
- F50 –
- F51 –
- F52 –
- F53 VENT SEAT
- F54 –
- F55 –
- F56 ISRVM/RLAD
- F57 –
- F58 REAR WIPER
- F59 –
- F62 LUMBER
M-case Fuses Usage
- F03 STARTER SOL
- F04 –
- F05 RR DEFOG
- F07 COOLING FAN MID
- F09 –
- F22 FRONT WIPER
- F23 –
- F26 COOLING FAN LOW
- F27 –
- F30 –
- F33 –
- F38 EBCM_2
- F39 COOLING FAN HIGH
- F43 –
- F60 POWER WINDOW LT
- F61 POWER WINDOW RT
Mini Relays Usage
- K04 COOLING FAN HIGH RELAY
Micro Relays Usage
- K01 STARTER SOL RELAY
- K02 –
- K03 POWERTRAIN RELAY
Instrument Panel Fuse Block
The instrument panel fuse block is on the underside of the driver side instrument panel. To access the fuses, remove the storage compartment. To remove the storage compartment, open the compartment and pull it out.
The vehicle may not be equipped with all of the fuses, relays, and features shown.
Fuse | Usage |
F01 | ONSTAR |
Fuse | Usage |
F02 | Sunroof |
F03 | Body Control Module 3 |
F04 | Body Control Module 7 |
F05 | Body Control Module 6 |
F06 | HVAC Module 1 |
F07 | Central Gateway Module |
F08 | Heated Steering Wheel Module |
F09 |
Virtual Cockpit Display/ Instrument Panel Display/ HVAC Display |
F10 | Radio |
F11 | ONSTAR |
F12 |
RPA/SBZA/FCM – Rear
Parking Assist/Side Blind Zone Alert Module/Front Camera Module |
F13 | HVAC Module 2 |
F14 |
Wireless Charger Module/ Remote Electronic PRNDL Display |
F15 | Body Control Module 2 |
Fuse | Usage |
F16 | Body Control Module 1 |
F17 | SWC_BKLT – Steering Wheel Controls |
F18 | – |
F19 | – |
F20 | Clock Spring |
F21 | Body Control Module 5 |
F22 | Data Link Connector |
F23 | DLC – Data Link Connector |
F24 |
AOS/SDM – Automatic Occupant Sensor/Sensing Diagnostic Module |
F24 |
DLIS/ESCL – Discrete Logic Ignition Switch/Electric Steering Column Lock |
F25 | LGM 1 – Lift Gate Module 1 |
F26 | Logistic |
F27 | Power Seat Passenger |
F28 | Body Control Module 8 |
F29 | DC to DC Converter 2 |
F30 | LGM 2 – Lift Gate Module 2 |
Fuse | Usage |
F31 |
Outside Rear View Mirror (OSRVM)/Electronic Throttle Control (ETC)/Rain Light Humidity Sensor/ Humidity Sensor |
F32 | Left Headlamp |
F33 | Body Control Module 4 |
F34 | Right Headlamp |
F35 | Amplifier |
F36 | – |
F37 | Power Seat DRIVER |
F38 | DC to DC Converter 1 |
F39 | Power Mode |
F40 | HVAC Blower |
F41 | Front USB |
F42 | Rear USB |
F43 | – |
F44 | – |
Relay | Usage |
CB1 | APO – Auxiliary Power Outlet |
K01 |
RAP/ACC – Retained Accessory Power/Adaptive Cruise Control |
K02 | Run |
K03 | Logistic |
K04 | – |
K05 | – |
FAQs
The fuse box in the 2024 Buick Envista is designed to protect the vehicle’s electrical components from damage caused by electrical overloads or faults.
The fuse box is typically located in the engine compartment or beneath the dashboard on the driver’s side. Refer to your owner’s manual for the exact location.
To access the fuse box, follow the instructions provided in your owner’s manual, as the location may vary depending on the trim and model.
The 2024 Buick Envista may use various fuse sizes, typically ranging from 5 to 30 amps. Check your owner’s manual or the fuse box cover for specific details.
Yes, you can replace fuses on your own. It’s a straightforward DIY task, but it’s important to follow the correct procedures outlined in the owner’s manual.
A blown fuse is often identified by a visible break in the wire or a darkened appearance. You can also use a multimeter to test for continuity.
Fuses can blow due to electrical faults, circuit overloads, or malfunctions in connected components.
If a fuse keeps blowing repeatedly, it’s important to consult your dealership or a qualified technician to diagnose and address the underlying issue causing the repeated fuse failures.
Some vehicles may come with spare fuses included. Refer to your owner’s manual or the fuse box cover to check if your 2024 Buick Envista has spare fuses.
No, it is not recommended to use a higher amp-rated fuse, as it may lead to electrical problems and damage. Always replace with the same amp-rated fuse.
The trip function on a blown fuse resets automatically when you replace the blown fuse with a new one of the correct rating.
When working with fuses, it’s essential to disconnect the vehicle’s battery and adhere to safety guidelines to avoid electrical shocks.
Adding extra fuses is not recommended, as it may overload the electrical system and cause damage.
Fuses protect various components, including headlights, power windows, radio, air conditioning, and more.
To prevent blown fuses, avoid overloading circuits, check for faulty components, and perform regular vehicle maintenance.
Useful Link
View Full PDF: 2024 Buick Envista Owner’s Manual
2024 Buick Envista Specs, Price, Features, Mileage and Review