Buick Encore GX 2023 Lighting User Manual
Lighting in cars is more than just a practical necessity; it’s also a design element that can improve safety, visibility, and the general look of a car. The 2023 Buick Encore GX knows this well and takes it to heart by having a lighting system that combines form and function in a way that looks good. As the sun goes down and the night sky covers the road, the Encore GX precisely and elegantly lights the way ahead. LED headlights cut through the night and are surrounded by stylish daytime running lights that not only make the car more visible but also give it a unique look. From adaptive headlights that move with the road to LED taillights that leave a lasting impact, Buick has carefully designed a lighting system that puts safety, style, and a touch of luxury at the top of the list. Inside, the Encore GX has customizable ambient lighting that creates a warm and welcoming atmosphere. This makes every ride comfortable and style. In this look at the lighting features of the 2023 Buick Encore GX, we look at its different parts, each of which is meant to make the driver’s trip safer, more stylish, and a little bit brighter at every turn.
Exterior Lighting
Exterior Lamp Controls
Headlamp High/Low-Beam Changer
The exterior lamp control is on the instrument panel to the left of the steering column.
There are four positions.
Turns the exterior lamps off and deactivates the AUTO mode. Turn O again to reactivate the AUTO mode.
In Canada, the headlamps will automatically reactivate when the vehicle is shifted out of P (Park).
AUTO : Turns the exterior lamps on and off automatically depending on outside lighting.
Turns on the parking lamps including all lamps, except the headlamps.
Turns on the headlamps together with the parking lamps and instrument panel lights.
IntelliBeam® System
If equipped, this system turns the vehicle’s high-beam headlamps on and off according to surrounding traffic conditions.
The system turns the high-beam headlamps on when it is dark enough and there is no other traffic present.
This light comes on in the instrument cluster when the IntelliBeam system is enabled.
Turning On and Enabling IntelliBeam
To enable the IntelliBeam system, press on the turn signal lever when it is dark outside and the exterior lamp control is in AUTO or . The blue high-beam on light appears on the instrument cluster when the high beams are on.
Driving with IntelliBeam
The system only activates the high beams when driving over 40 km/h (25 mph).
There is a sensor near the top center of the windshield that automatically controls the system. Keep this area of the windshield clear of debris to allow for best system performance.
The high-beam headlamps remain on, under the automatic control, until one of the following situations occurs:
- The system detects an approaching vehicle’s headlamps.
- The system detects a preceding vehicle’s
- The outside light is bright enough that high-beam headlamps are not required.
- The vehicle’s speed drops below 20 km/h (12 mph).
- The IntelliBeam system is disabled by the button on the turn signal lever. If this happens, press b on the turn signal lever when the exterior lamp control is in the AUTO or 5 position to reactivate the IntelliBeam system. The instrument cluster light will come on to indicate the IntelliBeam system is reactivated.
The high beams may not turn off automatically if the system cannot detect another vehicle’s lamps because of any of the following:
- The other vehicle’s lamps are missing, damaged, obstructed from view, or otherwise undetected.
- The other vehicle’s lamps are covered with dirt, snow, and/or road spray.
- The other vehicle’s lamps cannot be detected due to dense exhaust, smoke, fog, snow, road spray, mist, or other airborne
- The vehicle’s windshield is dirty, cracked, or obstructed by something that blocks the view of the light sensor.
- The vehicle is loaded such that the front end points upward, causing the light sensor to aim high and not detect headlamps and taillamps.
- The vehicle is being driven on winding or hilly roads.
- The IntelliBeam system may need to be disabled if any of the above conditions exist.Headlamp High/Low-Beam Changer
Push the turn signal lever away from you and release, to turn the high beams on. To return to low beams, push the lever again or pull it toward you and release. 
- This indicator light turns on in the instrument cluster when the high-beam headlamps are on.
- Flash-to-Pass
The flash-to-pass feature works with the low beams or Daytime Running Lamps (DRL) on or off. To flash the high beams, pull the turn signal lever toward you momentarily and then release it. - Daytime Running Lamps (DRL)
DRL can make it easier for others to see the front of your vehicle during the day. Fully functional DRL are required on all vehicles first sold in Canada.The DRL system comes on in daylight when the following conditions are met:- The ignition is on.
- The exterior lamp control is in AUTO.
- The light sensor determines it is daytime.
- When the DRL are on, the taillamps, sidemarker lamps, instrument panel lights, and other lamps will not be on. The DRL turn off when the headlamps are turned to O or the ignition is off. For vehicles sold in Canada, this control only works when the vehicle is parked.The regular headlamp system should be turned on when needed.
- Automatic Headlamp System
When the exterior lamp control is set to AUTO and it is dark enough outside, the headlamps come on automatically.
- There is a light sensor on top of the instrument panel. Do not cover the sensor; otherwise the headlamps will come on when they are not needed. The system may also turn on the headlamps when driving through a parking garage or tunnel.When it is bright enough outside, the headlamps will turn off or may change to DRL.The automatic headlamp system turns off when the exterior lamp control is turned to O or the ignition is off.Lights On with Wipers
If the windshield wipers are activated in daylight with the engine on, and the exterior lamp control is in AUTO, the headlamps, parking lamps, and other exterior lamps come on. The transition time for the lamps coming on varies based on wiper speed. When the wipers are not operating, these lamps turn off. Move the exterior lamp control to O or ; to disable this feature. - Hazard Warning Flashers
- Press to make the front and rear turn signal lamps flash on and off. This warns others that you are having trouble. Press | again to turn the flashers off.
Turn and Lane-Change Signals
Move the lever all the way up or down to signal a turn.
An arrow on the instrument cluster will flash in the direction of the turn or lane change.
Raise or lower the lever until the arrow starts to flash to signal a lane change. Hold it there until the lane change is complete. If the lever is moved momentarily to the lane change position, the arrow will flash three times. It will flash six times if Tow/ Haul Mode is active.
The lever returns to its starting position when it is released.
If after signaling a turn or lane change, the arrow flashes rapidly or does not come on, a signal bulb may be burned out.
Have any burned out bulbs replaced. If a bulb is not burned out, check the fuse. See Instrument Panel Fuse Block page 284.
Fog Lamps
The fog lamps button is on the instrument panel beside the steering wheel.
To turn on the fog lamps, the ignition and the headlamps or parking lamps must be on.
If equipped, press to turn on or off. An indicator light on the instrument cluster comes on when the fog lamps are on.
Some localities have laws that require the headlamps to be on along with the fog lamps
Interior Lighting
Instrument Panel Illumination Control
This feature adjusts the brightness of all illuminated controls. The instrument panel illumination control is next to the exterior lamp control.
Push the knob in all the way until it extends out and then turn the knob clockwise or counterclockwise to brighten or dim the lights. Push the knob back in when finished.
The knob is functional at night, or when the headlamps or parking lamps are ON.
Courtesy Lamps
The courtesy lamps come on when any door is opened ,on the remote key is pressed, or when the vehicle is turned off. See Dome Lamps page 125.
Dome Lamps
The front dome lamp controls are in the overhead console.
Press to turn the lamps off, even when any door is opened 
on the remote key is pressed, or when the vehicle is turned off.
When the button is returned to the middle position, the lamps turn on automatically when any door is opened, K on the remote key is pressed, or when the vehicle is turned off
Press to turn on the dome lamps.
If equipped, the rear dome lamp controls are in the headliner above the rear seats.
Reading Lamps
There are reading lamps on the overhead console and over the rear seats. These lamps come on when any door is opened on the remote key is pressed, or when the vehicle is turned off.
To operate, the vehicle must be on, in accessory mode, or using Retained Accessory Power (RAP)
Front Reading Lamps
The front reading lamps are in the overhead console.
Press the lamp lenses to turn the front reading lamps on or off
Rear Reading Lamps
If equipped with dual sunroof, the rear reading lamps are over the rear seats.
Press the lamp lens to turn the rear passenger reading lamps on or off.
Lighting Features
Entry Lighting
The interior lamps turn on when pressing on the remote key or opening any doors, and the dome lamp control is in the door position.
Some exterior lamps also turn on when pressing on the remote key or opening any doors. Low-Beam lamps will only turn on briefly at night, or in areas with limited lighting.
All lamps will gradually fade out after about 30 seconds.
Entry lighting can be disabled manually by closing all doors, pressing on the remote key, or starting the vehicle.
This feature can be changed. On the infotainment home page, select the Settings icon T Vehicle T Vehicle Locator Lights.
Exit Lighting
Some exterior lamps and interior lamps turn on when the driver door is opened after the vehicle is turned off.
The exterior and interior lamps remain on for a set amount of time, then automatically turn off.
The interior lights turn on when the vehicle is turned off.
The exterior lamps turn off immediately by turning the exterior lamp control off.
This feature can be changed. On the infotainment home screen, select the Settings icon T Vehicle T Exit Lighting.
Battery Load Management
The vehicle has Electric Power Management (EPM) that estimates the battery’s temperature and state of charge. It then adjusts the voltage for best performance and extended life of the battery.
When the battery’s state of charge is low, the voltage is raised slightly to quickly bring the charge back up. When the state of charge is high, the voltage is lowered slightly to prevent overcharging. If the vehicle has a voltmeter gauge or a voltage display on the Driver Information Center (DIC), you may see the voltage move up or down. This is normal. If there is a problem, an alert will be displayed.
The battery can be discharged at idle if the electrical loads are very high. This is true for all vehicles. This is because the generator (alternator) may not be spinning fast enough at idle to produce all of the power needed for very high electrical loads.
A high electrical load occurs when several of the following are on, such as: headlamps, high beams, rear window defogger, climate control fan at high speed, heated seats, engine cooling fans, trailer loads, and loads plugged into accessory power outlets.
EPM works to prevent excessive discharge of the battery. It does this by balancing the generator’s output and the vehicle’s electrical needs. It can increase engine idle speed to generate more power whenever needed. It can temporarily reduce the power demands of some accessories.
Normally, these actions occur in steps or levels, without being noticeable. In rare cases at the highest levels of corrective action, this action may be noticeable to the driver. If so, a DIC message might be displayed and it is recommended that the driver reduce the electrical loads as much as possible.
Battery Power Protection
This feature helps prevent the battery from being drained, if the interior courtesy lamps or reading lamps are accidentally left on.
If any of these lamps are left on, they automatically turn off after 10 minutes, if the ignition is off. The lamps will not come back on again until one of the following occurs:
- The ignition is turned on.
- The doors are closed and then re-opened.
Exterior Lighting Battery Saver
The exterior lamps turn off about 10 minutes after the vehicle is turned off, if the parking lamps or headlamps have been manually left on. This protects against draining the battery. To restart the 10-minute timer, turn the exterior lamp control to the O position and then back to the ; or 2 position.
To keep the lamps on for more than 10 minutes, the vehicle must be on or in accessory mode.
FAQ
The 2023 Buick Encore GX typically comes with LED headlights as standard or available options, depending on the trim level.
Yes, most models of the Encore GX come equipped with automatic headlights that turn on and off based on ambient lighting conditions.
Yes, LED daytime running lights are often integrated into the headlight design for improved visibility during the day.
The intensity of the headlights can often be adjusted manually through the vehicle’s settings to suit the driver’s preference.
Some trim levels may offer adaptive headlights that can adjust their direction and intensity based on the vehicle’s speed and steering angle.
Fog lights are typically available on certain trim levels, providing enhanced visibility in adverse weather conditions.
Yes, the Encore GX often features LED taillights, which are energy-efficient and provide improved visibility to other drivers.
Buick often incorporates its distinctive signature lighting elements into the taillight design for a stylish and recognizable look.
Some trim levels may offer interior ambient lighting, allowing the driver to customize the cabin’s lighting color and intensity for a more personalized driving experience.
Yes, the Encore GX often includes LED turn signal indicators on the side mirrors for improved visibility and safety.
Yes, the interior lighting is typically adjustable, allowing passengers to control the brightness and ambiance inside the cabin.
Some trim levels may offer automatic high-beam headlights, which can switch between high and low beams based on traffic conditions.
Approach lighting or puddle lighting, which illuminates the ground around the vehicle when approaching or exiting, may be available on certain trim levels.
Yes, interior reading lights are often included in the Encore GX’s design to provide convenient illumination for passengers.
Yes, many vehicles, including the Encore GX, allow drivers to customize their exterior lighting settings to meet their preferences and driving conditions.
Useful Link
View Full Manual: Buick Encore GX 2023 User Manual | Auto User Guide|
Buick Encore GX 2023 Vehicle Care User Manual
2023 Buick Encore Gx Specs, Price, Features, Mileage (Brochure)
Related Article
2024 Buick Envista Specs, Price, Features, Mileage and Review
2023 Buick Enclave Specs, Price, Features, Mileage (Brochure)
2023 Buick Envision Specs, Price, Features, Mileage (Brochure)
2024 Buick Encore GX Specs, Price, Features, Mileage and Review
2 replies on “Buick Encore GX 2023 Lighting User Manual”
My 2023 Buick encore exterior head lights, seem to have a orange glow or dim look,
What is the cause?
How can the be brighter?
The appearance of dim or orange-glowing headlights on your 2023 Buick Encore could be caused by a variety of factors. Some of the most common causes of dim headlights are:
Aging Bulbs: Over time, the brightness of headlight bulbs diminishes. They may need to be replaced.
Dirty or Foggy Lenses: The plastic cover over the headlights can become dirty, cloudy, or yellowed, reducing the effectiveness of the lights.
Electrical Issues: Sometimes, the issue could be in the electrical circuit. Reduced voltage due to poor wiring, a corroded ground, or a weak battery could cause the lights to appear dim.
Type of Bulb: Some types of bulbs (like halogens) can produce a more yellowish light compared to LEDs or Xenon bulbs, which tend to be brighter and whiter.
Wrong Setting: Make sure you’re not accidentally using your parking lights or daytime running lights instead of your full headlights.
Here’s how you could potentially make them brighter:
Clean the Lenses: Use a headlight cleaning kit or a mixture of baking soda and vinegar to remove the dirt and fog from the headlight lenses.
Replace the Bulbs: If the bulbs are old, consider replacing them with new, brighter ones. LEDs or Xenon bulbs could be a brighter option.
Check the Electrical System: If you’re not comfortable with this, take your vehicle to a professional to ensure that the electrical system is working correctly.
Polish or Restore Lenses: Severely yellowed or scratched lenses may require polishing or even replacement for better light output.
Adjust the Headlight Angle: Sometimes the angle of the headlights can be adjusted for better focus and increased brightness on the road.
Check for Recalls or Technical Service Bulletins (TSBs): There could be a known issue with your make and model that the manufacturer has issued a fix for.
Consult a Professional: If you’re unsure, it’s always best to consult with a qualified technician to diagnose and fix the issue.
Remember that brighter is not always better; excessively bright headlights could blind other drivers. Make sure that your headlights are in compliance with local regulations.
Before you make any changes to your vehicle, consult a professional for specific advice tailored to your make and model.