2014 Cadillac XTS Dashboard Instrument Cluster Guide
The instrument cluster and dashboard setting of the 2014 Cadillac XTS seamlessly combines state-of-the-art technology with opulent design to provide an unmatched driving experience. The elegantly designed dashboard of this flagship sedan welcomes you with a wealth of high-tech features and simple-to-use controls as soon as you enter its sumptuous interior. The instrument cluster is a marvel of modern innovation that combines sophisticated digital displays with analog components in a seamless manner to give drivers access to a wealth of real-time information. Discover the subtleties of the 2014 Cadillac XTS Dashboard Setting and Instrument Cluster, where form and function come together to create a driving experience that goes above and beyond. Dive into the pinnacle of automotive sophistication.
2024 Cadillac XT5 Review, Specs, Price And Mileage (Brochure)
Instrument Cluster
English Base Cluster Shown, Metric Similar
English Uplevel Balanced Cluster Shown, Metric Similar
Reconfigurable Instrument Cluster
There are four uplevel instrument cluster display configurations to
choose from: Simple, Performance, Balanced, or Enhanced.
Simple Configuration
The Simple configuration has one interactive display zone in the center.
Performance Configuration
The Performance configuration has two interactive display zones: one in the center of the speedometer and one in the lower left of the cluster screen.
Balanced Configuration
The Balanced configuration has three interactive display zones: one in the center of each of the gauges.
Enhanced Configuration
The Enhanced configuration has three interactive display zones.
Use the five-way control on the right side of the steering wheel to move between the different display zones and scroll through the different displays.
To change the cluster configuration:
- With the vehicle in P (Park), find the Settings page in one of the interactive display zones on the cluster.
- Press SEL to enter the Settings menu.
- Scroll down to highlight Display Layout. Then press SEL to select it.
- Each layout in the menu is represented by a small preview image of the display layout. Scroll up or down and highlight the selection. Press SEL to select the desired cluster configuration.
- Exit the Display Layout menu by pressing
Cluster Application Displays
The cluster can display information regarding Navigation, Audio, and Phone. On the base cluster, a speedometer can also be displayed in the center zone.
Navigation
If there is no active route, a compass will be displayed. If there is an active route, press SEL to end route guidance or turn the voice prompts on or off.
Audio
While the Audio application page is displayed, press SEL to enter the Audio menu. In the Audio menu search for music, select from favorites, or change the audio source.
Phone
While the Phone application page is displayed, press SEL to enter the Phone menu. In the Phone menu, if there is no active phone call, view recent calls, select from favourites, or scroll through contacts. If there is an active call, mute the phone or switch to handset operation.
Cluster Options Menu
To enter the cluster Options menu:
- Use the five-way control on the right side of the steering wheel to find the Options page in one of the interactive display zones on the cluster.
- Press SEL on the center of the five-way control to enter the Options menu.
Units: Press SEL while Units is highlighted to enter the Units menu. Choose English or metric units by pressing SEL while the desired item is highlighted. A checkmark will be displayed next to the selected item.
Info Pages: Press SEL while Info Pages are highlighted to select the items to be displayed in the DIC information displays.
Display Layout: Press SEL while Display Layout is highlighted to change the configuration of the cluster. See “Reconfigurable Instrument Cluster” earlier in this Instrument Cluster” earlier in this section.
Open Source Software: Press SEL while Open Source Software is highlighted to display open source software information.
Speedometer
The speedometer shows the vehicle’s speed in either kilometres per hour (km/h) or miles per hour (mph).
Odometer
The odometer shows how far the vehicle has been driven, in either kilometres or miles.
This vehicle has a tamper-resistant odometer. If the vehicle needs a
new cluster installed, the new odometer is set to the mileage of the old odometer. If this is not possible, it is set at zero and a label is put on the driver’s door to show the old mileage reading
Trip Odometer
The trip odometer shows how far the vehicle has been driven since the trip odometer was last reset.
The trip odometer is accessed and reset through the Driver Information Center (DIC).
Tachometer
The tachometer displays the engine speed in revolutions per minute (rpm).
Caution
If the engine is operated with the tachometer in the shaded warning area, the vehicle could be damaged, and the damages would not be covered by the vehicle warranty. Do not operate the engine with the tachometer in the shaded warning area.
Fuel Gauge
Base Level
Uplevel Balanced Configuration, Performance Similar
Uplevel Simple and Enhanced
Configurations
When the ignition is on, the fuel gauge indicates about ut how much fuel is left in the tank.
There is an arrow near the fuel gauge pointing to the side of the vehicle the fuel door is on
When the indicator is empty, the low fuel light comes on. There still is a little fuel left, but the vehicle should be refuelled soon.
Here are four things that some owners ask about. None of these show a problem with the fuel gauge:
- At the service station, the fuel pump shuts off before the gauge reads full.
- It takes a little more or less fuel to fill up than the gauge indicated. For example, the gauge may have indicated the tank was half full, but it took a little more or less than half the tank’s capacity to fill the tank.
- The gauge moves a little while turning a corner or speeding up.
- The gauge takes a few seconds to stabilize after the ignition is turned on, and goes back to empty when the ignition is turned off.
Engine Coolant Temperature Gauge
Metric Base Level
English Base Level
Uplevel Balanced Configuration
This gauge measures the temperature of the vehicle’s engine.
While driving under normal operating conditions, if the needle moves into the red area, the engine is too hot. Pull off the road, stop the vehicle, and turn off the engine as soon as possible.
FAQs
Customizing your driving experience with the 2014 Cadillac XTS is simple. To customize the instrument cluster to your tastes, just use the user-friendly settings menu.
The 2014 Cadillac XTS does have seamless smartphone integration, providing features like music library access and hands-free calling.
The 2014 Cadillac XTS’s instrument cluster offers real-time alerts for safety features like collision avoidance systems and lane departure warnings.
The 2014 Cadillac XTS Dashboard Setting does come with a navigation system that neatly shows turn-by-turn directions directly in the instrument cluster.
With the 2014 Cadillac XTS, you can easily customize the ambient lighting to your preference by navigating through the dashboard settings.
Adaptive cruise control and parking assistance are among the driver assistance features available on the 2014 Cadillac XTS instrument cluster.
you can manage your travels more skillfully with the 2014 Cadillac XTS’s real-time updates on range and fuel efficiency.
It’s very easy to sync your smartphone with the 2014 Cadillac XTS’s Bluetooth system. All you have to do is find the Bluetooth menu in the dashboard settings and follow the instructions.
The 2014 Cadillac XTS’s instrument cluster provides timely alerts for routine maintenance needs, so you can stay on top of car maintenance
you can customize your driving experience by choosing from a variety of display themes that are accessible through the settings menu.
The 2014 Cadillac XTS’s instrument cluster does display performance data like torque and horsepower in real-time.
The 2014 Cadillac XTS’s Heads-Up Display projects important information onto the windshield for improved visibility while coordinating with the instrument cluster.
You can save multiple driver profiles in the 2014 Cadillac XTS, maintaining personal preferences for climate controls, seat positions, and instrument cluster settings.
The 2014 Cadillac XTS is capable of receiving software updates, so you can be sure that your dashboard settings are up to date with the newest features and enhancements.
Useful Links
View Full PDF: 2014 Cadillac XTS Owner’s Manual| Auto User Guide
2024 Cadillac XT5 Review, Specs, Price And Mileage (Brochure)