2018 Cadillac XT5 Owner’s Manual

The 2018 Cadillac XT5 is a luxury midsize SUV that is stylish, flexible, and has the latest technology. The XT5 stands out on the road because of how sleek and modern it looks. Inside, the cabin is large and well-designed, with high-quality materials, comfortable seats for five people, and high-tech features. The XT5 has a powerful V6 engine, which makes it easy to drive and quick to respond. It has a lot of new technology, like the Cadillac User Experience (CUE) infotainment system, which has an easy-to-use touchscreen display and choices for connecting, like Apple CarPlay and Android Auto. The 2018 Cadillac XT5, with its mix of style, performance, and new technology, sets a new bar for luxury midsize SUVs.

Interior Mirrors

Interior Rearview Mirrors
Adjust the rearview mirror for a clear view of the area behind the vehicle. Do not spray glass cleaner directly on the mirror. Use a soft towel dampened with water.

Manual Rearview Mirror
Push the tab forward for daytime use and pull it rearward for nighttime use to avoid the glare of the headlamps from behind.

Automatic Dimming Rearview Mirror
If equipped, automatic dimming reduces the glare of headlamps from behind. The dimming feature comes on when the vehicle is started.

Rear Camera Mirror
If equipped, this automatic dimming mirror provides a wide-angle camera view of the area behind the vehicle. Pull the tab rearward to turn on the display. Push the tab forward to turn it off. When off, the mirror is automatically dimming. For ease of use, adjust the mirror for a clear view of the area behind the vehicle while the display is off. To adjust the brightness, press the button (1) on the back of the rearview mirror without covering the light sensor (2). Each button press cycles the brightness between five settings.

Warning: The Rear Camera Mirror (RCM) has a limited view. Portions of the road, vehicles, and other objects may not be seen. Do not drive or park the vehicle using only this camera. Objects may appear closer than they are. Check the outside mirrors or glance over your shoulder when making lane changes or merging. Failure to use proper care may result in injury, death, or vehicle damage.

The camera that provides the RCM image is above the license plate, next to the Rear Vision Camera (RVC).

Troubleshooting
If the tab is in the rearward position and a blue screen and d are displayed in the mirror and the display shuts off, see your dealer for service. The RCM may not work properly or display a clear image if:

• There is glare from the sun or headlamps. This may obstruct objects from view.
• Dirt, snow, or other debris blocks the camera lens. Clean the lens with a soft damp cloth.
• The back of the vehicle has been damaged and the position and mounting angle of the camera has changed.

Driving and Operating

Starting and Operating

New Vehicle Break-In

Caution: The vehicle does not need an elaborate break-in. But it will  perform better in the long run if you follow these guidelines:

• Do not drive at any one constant speed, fast or slow, for the first 800 km (500 mi). Do not make full-throttle starts. Avoid downshifting to brake or slow the vehicle.
• Avoid making hard stops for the first 300 km (200 mi) or so. During this time the new brake linings are not yet broken in. Hard stops with new linings can mean premature wear and earlier replacement. Follow this breaking-in guideline every time you get new brake linings.
• Following a break-in, engine speed, and load can be gradually increased.

Ignition Positions
The vehicle has an electronic keyless ignition with a pushbutton start. If the pushbutton start is not working, the vehicle may be near a strong radio antenna signal causing interference to the Remote Keyless Entry (RKE) system. See Remote Keyless Entry (RKE) System Operation 0 28. To shift out of P (Park), the vehicle must be turned on and the brake pedal must be applied.
Stopping the Engine/OFF (No Indicator Light): When the vehicle is stopped, press ENGINE START/STOP once to turn the engine off.
The transmission will shift to P (Park) automatically. If the vehicle is in P (Park), the ignition will turn off, and Retained Accessory Power (RAP) will remain active.

Warning: Turning off the vehicle while moving may cause a loss of power assist in the brake and steering systems and disable the airbags. While driving, only shut the vehicle off in an emergency.

If the vehicle must be shut off in an emergency:

1. Brake using firm and steady pressure. Do not pump the brakes repeatedly. This may deplete power assist, requiring increased brake pedal force.
2. Shift the vehicle to N (Neutral). This can be done while the vehicle is moving. After shifting to N (Neutral), firmly apply the brakes and steer the vehicle to a safe location.
3. Come to a complete stop, shift to P (Park), and press ENGINE START/STOP. The transmission must be in P (Park) to turn the ignition to the OFF position.
4. Set the parking brake.

• If the vehicle cannot be pulled over and must be shut off while driving, press and hold ENGINE START/STOP for longer than two seconds, or press twice in five seconds.
• ACC/ACCESSORY (Amber Indicator Light): This mode allows you to use some electrical accessories when the engine is off.
  With the ignition off, pressing ENGINE START/STOP once without the brake pedal applied will place the ignition system in ACC/ACCESSORY. The ignition will switch from ACC/ ACCESSORY to OFF after 10 minutes to prevent battery rundown.
• ON/RUN/START (Green Indicator Light): This mode is for driving and starting. With the ignition off and the brake pedal applied, pressing ENGINE START/STOP once will place the ignition system in ON/RUN/START. Once engine cranking begins, release the button. Engine cranking will continue until the engine starts, the ignition will then remain ON.

Service Mode
This model is available to verify the proper operation of the malfunctioning indicator lamp as may be required for emissions inspection purposes and for service and diagnostics. See Automatic Transmission 0 196.
With the vehicle off, and the brake pedal not applied, pressing and holding ENGINE START/STOP for more than five seconds will place the vehicle in Service Mode. The instruments and audio systems will operate as they do in ON/RUN, but the vehicle will not be able to be driven. The engine will not start in Service Mode. Press ENGINE START/ STOP again to turn the vehicle off.

Starting the Engine
Place the transmission in the proper gear, P (Park) or N (Neutral). To restart the engine when the vehicle is already moving, use N (Neutral).

Caution

• Do not try to shift to P (Park) if the vehicle is moving. If you do, you could damage the transmission.  Shift to P (Park) only when the vehicle is stopped.
• If you add electrical parts or accessories, you could change the way the engine operates. Any resulting damage would not be covered by the vehicle warranty.

To start the vehicle

1. With the Keyless Access system, the RKE transmitter must be in the vehicle. Press ENGINE START/STOP with the brake pedal applied. When the engine begins cranking, let go of the button. The idle speed will go down as the engine warms up. Do not race the engine immediately after starting it. If the RKE transmitter is not in the vehicle, if there is interference, or if the RKE battery is low, a Driver Information Center (DIC) message will display.
   Caution: Cranking the engine for long periods of time, by pressing ENGINE START/STOP immediately after cranking has ended, can overheat and damage the cranking motor, and drain the battery. Wait at least 15 seconds between each try, to let the cranking motor cool down.
2. If the engine does not start after five to 10 seconds, especially in very cold weather (below −18 °C or 0 °F), it could be flooded with too much gasoline. Try pushing the accelerator pedal all the way to the floor and hold it there, then press ENGINE START/STOP for up to a maximum of 15 seconds. Wait at least 15 seconds between each try, to allow the cranking motor to cool down. When the engine starts, let go of the button and the accelerator. If the vehicle starts briefly but then stops again, do the same thing. This clears the extra gasoline from the engine. Do not race the engine immediately after starting it. Operate the engine and transmission gently until the oil warms up and lubricates all moving parts.

Stop/Start System
The vehicle has a fuel-saving Stop/ Start system to shut off the engine to help conserve fuel.
Warning: The automatic engine Stop/Start feature causes the engine to shut off while the vehicle is still on. Do not exit the vehicle before shifting to P (Park). The vehicle may restart and move unexpectedly. Always shift to P (Park), and then turn the ignition off before exiting the vehicle.

Auto Engine Stop/Start
When the brakes are applied and the vehicle is at a complete stop, the engine may turn off. When stopped, the tachometer displays AUTO STOP. When the brake pedal is released or the accelerator pedal is pushed, the engine will restart.

Auto Stop may be deactivated if:

• A minimum vehicle speed is not reached.
• The engine or transmission is not at the required operating temperature.
• The outside temperature is not in the required operating range, typically below −10 °C (14 °F) or above 50 °C (122 °F).
• The transmission is in any gear other than D (Drive).
• The battery is low.
• The battery has been disconnected.
• The interior comfort level has not reached the required level for the climate control system or defog settings.
• The Auto Stop time is greater than two minutes.

FAQ’s