2019 Cadillac Escalade Display Screen Messages Guide
The 2019 Cadillac Escalade has a high-tech display screen system that gives drivers access to a lot of information that they can use. This easy-to-use interface is meant to make driving more enjoyable by putting important messages and instructions right in the driver’s hands. The display screen messages guide tells you everything you need to know about the different tips, notifications, and prompts that may show up on the screen while it’s being used. There are important safety alerts and regular maintenance reminders in this guide to make sure that drivers stay informed and in control while they are on the road. With its easy-to-use interface and clear directions, it’s simple to move between the messages on the screen, so drivers can focus on the road ahead with confidence and peace of mind.
2023 Cadillac Escalade Review, Specs, Price, And Mileage (Brochure)
Information Displays
Driver Information Center (DIC)
The DIC is displayed in the instrument cluster. It shows the status of many vehicle systems.
Up or Downs: Move SEL up or down to go to the previous or next selection.
Arrows: Press to move between the interactive display zones in the cluster. Press S to go back to the previous menu.
SEL: Press to open a menu or select a menu item. Press and hold to reset values on certain screens.
DIC Information Display Options
The info displayed on the DIC can be turned on or off through the Settings menu.
- Press SEL while viewing the Settings page in one of the interactive display zones on the cluster.
- Scroll to Info Pages and press SEL.
- Press y or z to move through the list of possible info displays.
- Press SEL while an item is highlighted to select or deselect that item. When an item is selected, a checkmark will appear next to it.
DIC Information Displays
The following is the list of all possible DIC information displays. Some of the information displays may not be available for your particular vehicle.
Trip 1 or Trip 2 and Average Fuel Economy: The Trip display shows the current distance traveled, in either kilometer (km) or miles (mi), since the trip odometer was last reset. The trip odometer can be reset by pressing and holding SEL while this display is active.
The Average Fuel Economy display shows the approximate average liters per 100 kilometers (L/100 km) or miles per gallon (mpg). This number is calculated based on the number of L/100 km (mpg) recorded since the last time this menu item was reset. This number reflects only the approximate average fuel economy that the vehicle has right now and will change as driving conditions change. The Average Fuel Economy can be reset along with the trip odometer by pressing and holding SEL while this display is active.
Also shows if the Active Fuel Management is active and in
V4 mode, or inactive and in V8 mode. See Active Fuel Management 0 208.
Fuel Range: This shows the approximate distance the vehicle can be driven without refueling. LOW will be displayed when the vehicle is low on fuel. The fuel range estimate is based on an average of the vehicle’s fuel economy over recent driving history and the amount of fuel remaining in the fuel tank.
Instantaneous Fuel Economy: Shows the current fuel economy in either liter per 100 kilometers (L/100 km) or miles per gallon (mpg). This number reflects only the approximate fuel economy that the vehicle has right now and changes frequently as driving conditions change.
Average Speed: This shows the average speed of the vehicle in kilometers per hour (km/h) or miles per hour (mph). This average is calculated based on the various vehicle speeds recorded since the last reset of this value. The average speed can be reset by pressing and holding SEL while this display is active.
Timer: This display can be used as a timer. To start the timer, press SEL while this display is active. The display will show the amount of time that has passed since the timer was last reset. To stop the timer, press SEL briefly while this display is active and the timer is running. To reset the timer to zero, press and hold SEL while this display is active.
Turn Arrow: Shows the next maneuver when using route guidance.
Estimated Time to Arrival: This shows the estimated time until arrival at your destination.
Distance to Destination: Shows the distance to the destination when using route guidance.
Speed Limit: Shows the current speed limit. The information for this page comes from a roadway database.
Speed Warning: Allows the driver to set a speed that they do not want to exceed. To set the Speed Warning, press SEL when the Speed Warning is displayed. Press y or z to adjust the value. This feature can be turned off by pressing and holding SEL while viewing this page. If the selected speed limit is exceeded, a pop-up warning is displayed and a chime may sound.
Cruise Set Speed: This shows the speed the cruise control or Adaptive Cruise Control is set to.
Follow Distance Indicator: When Adaptive Cruise Control (ACC) is not engaged, the current follow time to the vehicle ahead is displayed as a time value on this page. When ACC has been engaged, the display switches to the gap setting page. This page shows the current gap setting along with the vehicle ahead indicator.
Battery Voltage: Shows the current battery voltage.
Oil Life: Shows an estimate of the oil’s remaining useful life. If REMAINING OIL LIFE 99% is displayed, that means 99% of the current oil life remains.
When the remaining oil life is low, the CHANGE ENGINE OIL SOON message will appear on the display. The oil should be changed as soon as possible. See Engine Oil 0 281. In addition to the engine oil life system monitoring the oil life, additional maintenance is recommended. See Maintenance Schedule 0 360.
The Oil Life display must be reset after each oil change. It will not reset itself. Do not reset the Oil Life display accidentally at any time other than when the oil has just been changed. It cannot be reset accurately until the next oil change. To reset the engine oil life system, press and hold SEL for several seconds while the Oil Life display is active. See Engine Oil Life System 0 283.
Oil Pressure: Shows the engine oil pressure in kPa (kilopascals) or psi (pounds per square inch).
Engine Hours: Shows the total number of hours the engine has run.
Transmission Fluid Temperature: Shows the temperature of the automatic transmission fluid in either degrees Celsius (°C) or degrees Fahrenheit (°F).
Tire Pressure: Shows the approximate pressures of all four tires. Tire pressure is displayed in either kilopascal (kPa) or pounds per square inch (psi). If the pressure is low, the value for that tire is shown in amber. See Tire Pressure Monitor System 0 319 and Tire Pressure Monitor Operation 0 320.
Blank Page: Allows for no information to be displayed in the cluster info display areas.
Head-Up Display (HUD)
Warning
If the HUD image is too bright or too high in your field of view, it may take you more time to see things you need to see when it is dark outside. Be sure to keep the HUD image dim and placed low in your field of view.
If equipped with HUD, some information concerning the operation of the vehicle is projected onto the windshield. The image is projected through the HUD lens on top of the instrument panel. The information appears as an image focused out toward the front of the vehicle.
Caution
If you try to use the HUD image as a parking aid, you may misjudge the distance and damage your vehicle. Do not use the HUD image as a parking aid.
The HUD information can be displayed in various languages. The speedometer reading and other numerical values can be displayed in either English or metric units. The language selection is changed through the radio and the units of measurement are changed through the instrument cluster. See Vehicle Personalization 0 155 and “Options” under Instrument Cluster 0 133.
The HUD may display some of the following vehicle information and vehicle messages or alerts:
- Speed
- Tachometer
- Audio
- Phone
- Navigation
- Collision Alert
- Adaptive Cruise Control and set speed
- Lane Departure
- Low Fuel
Some vehicle messages or alerts displayed in the HUD may be cleared by using the steering wheel controls. See Vehicle Messages 0 154. Some information shown may not be available on your vehicle if it is not equipped with these features.
The HUD control is to the left of the steering wheel.
To adjust the HUD image:
- Adjust the driver seat.
- Start the engine.
- Use the following settings to adjust the HUD.
Press or lift to center the HUD image. The HUD image can only be adjusted up and down, not side-to-side
Press to select the display view. Each press will change the display view.
D: Lift and hold to brighten the display. Press and hold to dim the display. Continue to hold to turn the display off.
The HUD image will automatically dim and brighten to compensate for outside lighting. The HUD brightness control can also be adjusted as needed.
The HUD image can temporarily light up depending on the angle and position of sunlight on the HUD display. This is normal.
Polarized sunglasses could make the HUD image harder to see.
Head-Up Display (HUD) Rotation Option
This feature allows for adjusting the angle of the HUD image.
Press SEL on the steering wheel controls while Head-up Display Rotation is highlighted to enter Adjust
Mode. Press y or z to adjust the angle of the HUD display. Press S or T to highlight OK, then press SEL to save the setting. CANCEL can also be selected to cancel the setting. The vehicle must be in P (Park). See Instrument Cluster 0 133.
HUD Views
There are four views in the HUD. Some vehicle information and vehicle messages or alerts may be displayed in any view.
Speed View: This displays digital speed in English or metric units, speed limit, vehicle ahead indicator, Lane Departure Warning/Lane Keep Assist, and Adaptive Cruise Control and set speed. Some information only appears on vehicles that have these features, and when they are active.
Audio/Phone View: This displays digital speed, indicators from the speed view along with audio/phone information. The current radio station, media type, and incoming calls will be displayed.
All HUD views may briefly display audio information when the driver uses the steering wheel controls to adjust the audio settings appearing in the instrument cluster.
Incoming phone calls appearing in the instrument cluster may also be displayed in any HUD view.
Navigation View: This displays digital speed, indicators from speed view along with Turn-by-Turn Navigation information in some vehicles. The compass heading is displayed when navigation routing is not active.
Navigation Turn-by-Turn Alerts shown in the instrument cluster may also be displayed in any HUD view.
Performance View: This displays digital speed, indicators from speed view along with rpm reading, transmission positions, and gear shift indicator (if equipped).
Care of the HUD
Clean the inside of the windshield to remove any dirt or film that could reduce the sharpness or clarity of the HUD image. Clean the HUD lens with a soft cloth sprayed with glass cleaner. Wipe the lens gently, then dry it.
HUD Troubleshooting
If you cannot see the HUD image when the ignition is on, check that:
- Nothing is covering the HUD lens.
- The HUD brightness setting is not too dim or too bright.
- The HUD is adjusted to the proper height.
- Polarized sunglasses are not worn.
- The windshield and HUD lens are clean.
If the HUD image is not correct, contact your dealer. The windshield is part of the HUD system. See Windshield Replacement 0 298.
Vehicle Messages
Messages displayed on the DIC indicate the status of the vehicle or some action that may be needed to correct a condition. Multiple messages may appear one after another.
The messages that do not require immediate action can be acknowledged and cleared by pressing SEL. The messages that require immediate action cannot be cleared until that action is performed.
All messages should be taken seriously; clearing the message does not correct the problem.
If a SERVICE message appears, see your dealer. Follow the instructions given in the messages. The system displays messages regarding the following topics:
- Service Messages
- Fluid Levels
- Vehicle Security
- Brakes
- Ride Control Systems
- Driver Assistance Systems
- Cruise Control
- Lighting and Bulb Replacement
- Wiper/Washer Systems
- Doors and Windows
- Seat Belts
- Airbag Systems
- Engine and Transmission
- Tire Pressure
- Battery
Engine Power Messages
ENGINE POWER IS REDUCED
This message displays when the vehicle’s propulsion power is reduced. A reduction in propulsion power can affect the vehicle’s ability to accelerate. If this message is on, but there is no observed reduction in performance, proceed to your destination. The performance may be reduced the next time the vehicle is driven. The vehicle may be driven while this message is on, but maximum acceleration and speed may be reduced. Anytime this message stays on or displays repeatedly, the vehicle should be taken to your dealer for service as soon as possible.
Vehicle Speed Messages
SPEED LIMITED TO XXX KM/H (MPH)
This message shows that the vehicle speed has been limited to the speed displayed. The limited speed is protection for various propulsion and vehicle systems, such as lubrication, thermal, suspension, Teen Driver if equipped, or tires.
Vehicle Personalization
Use the audio system controls to access the personalization menus for customizing vehicle features. The following are all possible personalization features. Depending on the vehicle, some may not be available.
Audio System Controls
- Touch the desired feature to display a list of available options.
- Touch to select the desired feature setting.
- Touch S Back to return to the previous menu or exit.
Touch SETTINGS from the Home Page on the infotainment display.
Personalization Menus
The following list of menu items may be available:
- Time and Date
- Rear Seat Reminder
- Language
- Video Voice-Over
- Valet Mode
- Teen Driver
- Radio
- Vehicle
- Bluetooth
- Apple CarPlay
- Android Auto
- Voice
- Display
- Rear Camera
- Return to Factory Settings
- Software Information
- Wi-Fi
Detailed information for each menu follows.
Time and Date
Manually set the time and date. See Clock 0 127.
Rear Seat Reminder
This allows for a chime and a message when the rear door has been opened before or during the operation of the vehicle. Select Off or On.
Language
Select Language, then select from the available language(s). The selected language will be displayed on the system, and voice recognition will reflect the selected language.
Video Voice-Over
When activated, the Rear Seat Infotainment (RSI) system will read aloud menu titles, menu listings, pop-ups, alerts, and file titles from audio and video media. Select Off or On.
Valet Mode
This will lock the infotainment system and steering wheel controls. It may also limit access to vehicle storage locations if equipped.
To enable valet mode:
- Enter a four-digit code on the keypad.
- Select Enter to go to the confirmation screen.
- Re-enter the four-digit code.
Touch Lock or Unlock to lock or unlock the system. Touch Back to go back to the previous menu.
Teen Driver
See “Teen Driver” under “Settings” in the infotainment manual.
Radio
Select to display the Radio menu and the following may be displayed:
- Manage Favorites
- Number of Favorites Shown
- Audible Touch Feedback
- Bose AudioPilot
- Auto Volume
- Maximum Startup Volume
Manage Favorites
This allows favorites to be edited. See “Manage Favorites” in “Settings” under “Radio” in the infotainment manual.
Number of Favorites Shown
Touch to set the number of favorites to display. Select the desired number or select Auto and the infotainment system will automatically adjust the number of favorites shown.
Audible Touch Feedback
This allows Audible Touch Feedback to be turned on or off. Select Off or On.
Bose AudioPilot
This allows Bose AudioPilot to be turned on or off.
Select Off or On.
Auto Volume
This feature adjusts the volume based on vehicle speed and ambient noise. Select Off, Low, Medium-Low, Medium, Medium-High, or High.
Maximum Startup Volume
This feature sets the maximum startup volume. If the vehicle is started and the volume is greater than this level, the volume is adjusted to this level. To set the maximum startup volume, touch + or − to increase or decrease.
2023 Cadillac Escalade Review, Specs, Price, And Mileage (Brochure)
Vehicle
Select and the following may display:
- Climate and Air Quality
- Collision/Detection Systems
- Comfort and Convenience
- Lighting
- Power Door Locks
- Remote Lock, Unlock, Start
Climate and Air Quality
Select and the following may display:
- Auto Fan Speed
- Auto Cooled Seats
- Auto Heated Seats
- Auto Defog
- Auto Rear Defog
Auto Fan Speed
This feature will set the auto fan speed. Select Low, Medium, or High.
Auto Cooled Seats
When enabled, this feature will automatically activate the cooled seats at the level required by the interior temperature. See Heated and Cooled Front Seats 0 69. Select Off or On.
Auto Heated Seats
When the vehicle is on, this feature will automatically activate the heated seats at the level required by the vehicle’s interior temperature. See Heated and Cooled Front Seats 0 69. Select Off or On.
Auto Defog
When set to On, the auto defog comes on when the climate control sensor detects high interior humidity. Air will be directed to the windshield. Select Off or On.
Auto Rear Defog
If equipped, this feature will automatically turn on the rear window defogger when the vehicle is first started in cold weather and turn off when the vehicle is warmed. Select Off or On.
Collision/Detection Systems
Select the Collision/Detection Systems menu and the following may display:
- Alert Type
- Forward Collision System
- Rear Cross Traffic Alert
- Adaptive Cruise Go Notifier
- Park Assist
- Lane Change Alert
Alert Type
This feature will set crash alerts to beeps or seat vibrations. See Driver Assistance Systems 0 236. Select Beeps or Safety Alert Seat.
Forward Collision System
This feature will turn on or off Forward Collision Alert (FCA) and Forward Automatic Braking (FAB). The Off setting disables all FCA and FAB functions. With the Alert and Brake settings, both FCA and FAB are available. The Alert setting disables FAB. See Forward Automatic Braking (FAB) 0 246. Select Off, Alert and Brake, or Alert.
Rear Cross Traffic Alert
This allows the Rear Cross Traffic Alert feature to be turned on or off. See Assistance Systems for Parking or Backing 0 237. Select Off or On.
Adaptive Cruise Go Notifier
This feature will give a reminder that Adaptive Cruise Control provides when it has brought the vehicle to a complete stop behind another stopping vehicle, and then that vehicle drives on. Select Off or On.
Park Assist
If equipped, this allows the feature to be turned on or off. See Assistance Systems for Parking or Backing 0 237. Select Off, On, or On with the Towbar Attached.
Lane Change Alert
This allows the feature to be turned on or off. See Lane Change Alert (LCA) 0 248.
When the Lane Change Alert is disabled, the Side Blind Zone Alert is also disabled. Select Off or On.
Comfort and Convenience
Select and the following may display:
- Auto Running Boards
- Auto Memory Recall
- Easy Exit Options
- Chime Volume
- Hands-Free Liftgate Control
- Reverse Tilt Mirror
- Auto Mirror Folding
- Auto Wipe in Reverse Gear
Auto Running Boards
This allows the feature to be turned on or off. See Power Assist Steps 0 48. Select Off, On, or Extended.
Auto Memory Recall
This feature automatically recalls the current driver’s previously stored 1 or 2 button positions when the ignition is changed from off to on or ACC/ACCESSORY. See Memory Seats 0 65. Select On or Off.
Easy Exit Options
This feature automatically recalls the previously stored exit button position when exiting the vehicle. See Memory Seats 0 65. Select Off or On.
Chime Volume
This allows the selection of the chime volume level. Touch + or − to adjust the volume.
Hands-Free Liftgate Control
The liftgate may be operated with a kicking motion under the rear bumper. See Liftgate 0 40. Select Off, On-Open, and Close, or On-Open Only.
Reverse Tilt Mirror
When on, the driver and/or passenger mirrors will tilt downward when the vehicle is shifted to R (Reverse) to improve visibility of the ground near the rear wheels. See Reverse Tilt Mirrors 0 53. Select Off, On – Driver and Passenger, On – Driver, or On – Passenger.
Auto Mirror Folding
When on, the outside mirrors will automatically fold or unfold when the Remote Keyless Entry (RKE)
transmitter Q or K button is pressed and held. See Folding Mirrors 0 52. Select Off or On.
Auto Wipe in Reverse Gear
When the front wiper is on, the rear wiper will automatically activate when the vehicle is shifted to R (Reverse). Select Off or On.
Lighting
Select the Lighting menu and the following may display:
- Vehicle Locator Lights
- Exit Lighting
Vehicle Locator Lights
This feature will flash the exterior lamps and allow some of the exterior lamps and most of the interior lamps to turn on briefly when K on the Remote Keyless Entry (RKE) transmitter is pressed to locate the vehicle. Select On or Off.
Exit Lighting
This allows the selection of how long the exterior lamps stay on when leaving the vehicle when it is dark outside. Select Off, 30 Seconds, 60 Seconds, or 120 Seconds.
Power Door Locks
Select Power Door Locks and the following may display:
- Unlocked Door Anti-Lockout
- Auto Door Unlock
- Delayed Door Lock
Unlocked Door Anti-Lockout
When on, this feature will keep the driver door from locking when the vehicle is off, the driver door is open, and locking is requested. All the doors will lock and only the driver door will unlock. See Lockout Protection 0 39.
If Off is selected, the Delayed Door Lock menu will be available. Select Off or On.
Auto Door Unlock
This allows the selection of which of the doors will automatically unlock when the vehicle is shifted into P (Park). Select Off, All Doors, or Driver Door.
Delayed Door Lock
When on, this feature will delay the locking of the doors. To override the delay, press the power door lock switch on the door. Select Off or On.
Remote Lock, Unlock, Start
Select Remote Lock, Unlock, Start and the following may display:
- Remote Unlock Light Feedback
- Remote Lock Feedback
- Remote Door Unlock
- Remote Start Auto Cool Seats
- Remote Start Auto Heat Seats
- Remote Window Operation
- Passive Door Unlock
- Passive Door Lock
- Remote Left in Vehicle Alert
Remote Unlock Light Feedback
When on, the exterior lamps will flash when unlocking the vehicle with the RKE transmitter. Select Off or Flash Lights.
Remote Lock Feedback
This allows the selection of what type of feedback is given when locking the vehicle with the RKE transmitter. Select Off, Lights and Horn, Lights Only, or Horn Only.
Remote Door Unlock
This allows the selection of which doors will unlock when pressing K on the RKE transmitter. Select All Doors or Driver Door.
Remote Start Auto Cool Seats
If equipped and turned on, this feature will turn the cooled seats on when using remote start on warm days. Select Off or On.
Remote Start Auto Heat Seats
If equipped and turned on, this feature will turn the heated seats on when using remote start on cold days. Select Off or On.
Remote Window Operation
This allows the windows to be opened when pressing K on the RKE transmitter. See Remote Keyless Entry (RKE) System Operation 0 28.
Select Off or On.
Passive Door Unlock
This allows the selection of what doors will unlock when using the button on the driver’s door to unlock the vehicle. Select All Doors or Driver Door.
Passive Door Lock
This allows passive locking to be turned on or off and selects feedback. See Remote Keyless Entry (RKE) System Operation 0 28. Select Off, On with Horn Chirp, or On.
Remote Left in Vehicle Alert
This feature sounds an alert when the RKE transmitter is left in the vehicle. This menu also enables Remote No Longer in Vehicle Alert.
Select Off or On.
Bluetooth
Select and the following may display:
- Pair New Device
- Device Management
- Ringtones
- Voice Mail Numbers
- Text Message Alerts
Pair New Device
Select to pair a new device. See “Pairing” under “Bluetooth (Infotainment Controls)” in the infotainment manual.
Device Management
Select to connect to a different phone source, disconnect a phone, or delete a phone.
Ringtones
Select to change the ringtone for the specific phone. The phone does not need to be connected to change the ringtone.
Voice Mail Numbers
This feature displays the voicemail number for all connected phones. To change the voicemail number, select EDIT. Type a new number, then select SAVE.
Text Message Alerts
This feature allows text messages to be received. See “Text Messaging” under “Phone” in the infotainment manual. Select Off or On.
Apple CarPlay
Select and the following may display:
- Apple CarPlay
- Manage Apple CarPlay Devices
Apple CarPlay
This feature allows Apple devices to be connected to the infotainment system through a USB port. Select Off or On.
Manage Apple CarPlay Devices
Select to manage Apple devices. Apple CarPlay must be on for this feature to be accessed.
Android Auto
Select and the following may display:
- Android Auto
- Manage Android Auto Devices
Android Auto
This feature allows Android devices to be connected to the infotainment system through a USB port. Select Off or On.
Manage Android Auto Devices
Select to manage Android devices. Android Auto must be on for this feature to be accessed.
Voice
Select and the following may display:
- Confidence Threshold
- Prompt Length
- Audio Feedback Speed
- Display “What Can I Say?” Tips
Confidence Threshold
This feature allows the adjustment of the sensitivity of the speech recognition system. Select Confirm More or Confirm Less.
Prompt Length
This feature adjusts the voice prompt length. Select Short or Long.
Audio Feedback Speed
This feature adjusts the audio feedback speed. Select Slow, Medium, or Fast.
Display “What Can I Say?” Tips
This feature gives voice command tips. Select Off or On.
Display
Select and the following may display:
- Mode
- Proximity Sensing
- Calibrate Touchscreen
- Turn Display Off
Mode
Select to change the display of the infotainment system. Select Auto, Day, or Night.
Proximity Sensing
This allows the feature to be turned on or off. Select Off, On, or On-Map Only.
Calibrate Touchscreen
Select to calibrate the touchscreen, then follow the prompts.
Turn Display Off
Select to turn the display off. Touch anywhere on the infotainment display or press any infotainment controls on the center stack to turn the display on.
Rear Camera
Select and the following may display:
- Guidance Lines
- Rear Park Assist Symbols
Guidance Lines
Select to turn Off or On. See Assistance Systems for Parking or Backing 0 237.
Rear Park Assist Symbols
Select to turn Off or On. See Assistance Systems for Parking or Backing 0 237.
Return to Factory Settings
Select and the following may display:
- Restore Vehicle Settings
- Clear All Private Data
- Restore Radio Settings
Restore Vehicle Settings
This allows the selection of restoring vehicle settings. Select Restore or Cancel.
Clear All Private Data
This allows the selection to clear all private information from the vehicle. Select Delete or Cancel.
Restore Radio Settings
This allows selection to restore radio settings. Select Restore or Cancel.
Software Information
Select to view or update the infotainment system’s current software information.
Wi-Fi
Select and the following may display:
- Wi-Fi
- Manage Wi-Fi Networks
Wi-Fi
This feature allows Wi-Fi networks to be turned off or on. Select Off or On.
Manage Wi-Fi Networks
Select to manage Wi-Fi networks. Wi-Fi must be on for this feature to be accessed.
FAQs
Various messages such as “Check Engine”, “Low Tire Pressure”, “Oil Change Required”, and “Service StabiliTrak” may appear on the display screen.
The display screen provides detailed instructions or warnings about the vehicle’s status or required maintenance, helping users understand and address issues promptly.
The driver should promptly check the vehicle’s engine for any issues and, if necessary, schedule a diagnostic checkup with a qualified technician.
This message usually appears when the vehicle’s onboard system detects that it’s time for an oil change based on elapsed mileage or time since the last oil change.
The driver should promptly check the tire pressure of all tires and inflate them to the recommended levels. If the issue persists, they should have the tires inspected for any leaks or damage.
The display screen provides real-time notifications and alerts about various systems, helping drivers maintain optimal vehicle performance and safety.
This message indicates a potential issue with the vehicle’s StabiliTrak stability control system, and the driver should have it inspected by a qualified technician to ensure proper functioning.
While some settings may be customizable, the display screen primarily shows standardized messages related to vehicle status, warnings, and maintenance reminders.
By promptly alerting drivers to potential issues or required maintenance, the display screen helps ensure that the vehicle operates safely and reliably.
This message indicates that the vehicle’s battery voltage is low, and the Battery Saver system has been activated to conserve power. The driver should address the issue promptly to prevent potential starting or electrical system problems.
This message typically appears when there’s a malfunction in the vehicle’s charging system, indicating a potential issue with the battery, alternator, or related components.
This message warns the driver that the fuel level is low and prompts them to refuel the vehicle at the earliest convenience to avoid running out of gas.
Critical alerts typically appear in red or with accompanying warning symbols, indicating immediate attention is required, whereas maintenance reminders are usually in yellow or orange and denote scheduled service intervals.
Yes, drivers can often access more detailed diagnostic information through the vehicle’s onboard diagnostics system, which may require specialized equipment or software available at authorized service centers.
Useful Link:
View full PDF: Cadillac Escalade 2019 User Manual | Auto User Guide
2023 Cadillac Escalade Review, Specs, Price, And Mileage (Brochure)
Replacing Fuses: 2019 Cadillac Escalade Fuse Diagram and Details