2024 Cadillac Escalade Owner’s Manual

2024 Cadillac Escalade Owner’s Manual

In the full-size SUV market, the Cadillac Escalade 2024 represents the pinnacle of luxury and innovation. Modernity and sophistication are embodied in the Escalade’s unmistakable design and commanding presence. Its roomy and painstakingly designed inside combines high-end materials and state-of-the-art technologies to deliver a luxurious and cozy driving experience. It is anticipated to have a strong engine under the hood, guaranteeing excellent performance and towing capacity. Cadillac’s dedication to producing a sophisticated and cutting-edge SUV is embodied in the 2024 Cadillac Escalade, which will appeal to individuals who value both prestige and adaptability in their cars.

Head Restraints

The vehicle’s front seats have adjustable head restraints in the outboard seating positions.

Warning
With head restraints that are not installed and adjusted properly, there is a greater chance that occupants will suffer a neck/spinal injury in a crash. Do not drive until the head restraints for all occupants are installed and adjusted properly. If your vehicle has rear head restraints that fold down, always return them to the full upright position whenever an occupant is seated in the seat. Adjust the head restraint so that the top of the restraint is at the same height as the top of the occupant’s head. This position reduces the chance of a neck injury in a crash.

Front Seats
The vehicle’s front seats have adjustable head restraints in the outboard seating positions. The height of the head restraint can be adjusted. To raise or lower the head restraint, press the button located on the side of the head restraint and pull up or push the head restraint down, and release the button. Pull and push on the head restraint after the button is released to make sure that it is locked in place. The front seat outboard head restraints are not removable.

Rear Seats

Second Row Seats
The vehicle’s second-row seats have head restraints in the outboard seating positions that cannot be adjusted. The second row of outboard head restraints are not removable. The second row of outboard head restraints are designed to be folded. When folding the second-row seatbacks down, the head restraint will automatically fold out of the way as the seat is folded down. The second row of outboard head restraints can be folded forward to allow for better visibility when the rear seat is unoccupied.

To fold the head restraint, press the button on the side of the head restraint. The head restraint will fold forward automatically.

When an occupant or child restraint is in the seat, always return the head restraint to the full upright position. Push the head restraint up and rearward until it locks into place. Push and pull on the head restraint to make sure that it is locked.

Third Row Seats
The vehicle’s third-row seats have head restraints in the outboard seating positions that cannot be adjusted up or down. The third-row outboard head restraints are not removable. The third-row outboard head restraints are designed to be folded. When folding the third-row seatbacks down, the head restraint will automatically fold out of the way as the seat is folded down. The head restraint can be folded forward to allow for better visibility when the rear seat is unoccupied. To fold the head restraint, press the button on the side of the head restraint. The head restraint will fold forward automatically. When an occupant or child restraint is in the seat, always return the head restraint to the full upright position. Push the head restraint up and rearward until it locks into place. Push and pull on the head restraint to make sure that it is locked.

Front Seats

Power Seat Adjustment

Warning
You can lose control of the vehicle if you try to adjust a driver seat while the vehicle is moving. Adjust the driver seat only when the vehicle is not moving. The power seats will work with the ignition off. Children could operate the power seats and be injured. Never leave children alone in the vehicle. To adjust the seat:

• Move the seat forward or rearward by sliding the control forward or rearward.
• Raise or lower the front part of the seat cushion by moving the front of the control up or down.
• Raise or lower the seat by moving the rear of the control up or down.

Reclining Seatbacks

To recline the seatback:

• Tilt the top of the control rearward to recline.
• Tilt the top of the control forward to raise.

Warning
Sitting in a reclined position when the vehicle is in motion can be dangerous. Even when buckled up, the seat belts cannot do their job. The shoulder belt will not be against your body. Instead, it will be in front of you. In a crash, you could go into it, receiving neck or other injuries. The lap belt could go up over your abdomen. The belt forces would be there, not at your pelvic bones. This could cause serious internal injuries. For proper protection when the vehicle is in motion, have the seatback upright. Then sit well back in the seat and wear the seat belt properly.

Do not have a seatback reclined if the vehicle is moving.

Lumbar Adjustment

• Press and hold the front or rear of the control to increase or decrease lumbar support.
• If equipped, press and hold the top or bottom of the control to raise or lower lumbar support.

Uplevel Seat AdjustmentTo adjust lumbar support, if equipped:

• Press and release or hold Feature Select (1) to scroll to lumbar support on the infotainment display.
• Press Forward (5) or Rearward (3) to adjust lumbar forward or rearward.
• Press Up (2) or Down (4) to adjust lumbar up or down.

Bolster Support
To adjust bolster support, if equipped:

Press and release or hold Feature Select (1) to scroll to bolster support on the infotainment display. Press Forward (5) or Rearward (3) to adjust bolster support inward or outward.

Upper Shoulder Support
To adjust upper shoulder support, if equipped:

• Press and release or hold Feature Select (1) to scroll to upper shoulder support on the infotainment display.
• Press Forward (5) or Rearward (3) to adjust shoulder support forward or rearward.

Massage

If equipped, the vehicle must be on to use the massage feature.

To activate and adjust massage:

• Turn the Feature Select (1) to scroll to massage on the infotainment display.
• Press Up (2) or Down (4) to adjust the massage type.
• Press Forward (5) or Rearward (3) to adjust the intensity.
• To turn massage off or to activate the massage, press the massage On/Off control (6).

The massage feature will turn off after approximately 20 minutes. Press the massage On/Off control (6) to restart the massage feature.

Memory Seats

Overview
If equipped, the memory seat feature allows drivers to save their unique driving positions and a shared exit position. See “Saving Seating Positions” later in this section. The saved positions can be recalled manually by all drivers, see “Manually Recalling Seating Positions” later in this section, and drivers with remote key 1 and 2 can also recall them automatically. See “Auto Seat Entry Memory Recall” or “Auto Seat Exit Memory Recall” later in this section. To enable automatic recalls, turn on Seat Entry Memory and/or Seat Exit Memory. See “Enabling Automatic Recalls” later in this section. The memory recalls may be cancelled at any time during the recall. See “Cancel Memory Seating Recalls” later in this section.

Identifying Driver Number
The vehicle identifies the current driver by their remote key number 1–8. The current remote key number may be identified by Driver Information Center (DIC) welcome message, “You are driver x for memory recalls.” This message is displayed the first few times the vehicle is turned on when a different remote key is used. For Seat Entry Memory to work properly, save positions to the 1 or 2 memory button matching the driver number of this welcome message. To aid in identifying remote key IDs, it is recommended to only carry one remote key when entering the vehicle. Perform the following if the welcome message is not displayed:

1. Move all keys and remote keys away from the vehicle.
2. Start the vehicle with another remote key. A DIC welcome message should display indicating the driver number of the other remote key. Turn the vehicle off and remove the other key or remote key from the vehicle.
3. Start the vehicle with the initial key or remote key. The DIC welcome message should display the driver number of the initial remote key.

Saving Seating Positions
Read these instructions completely before saving memory positions.

To save preferred driving positions to 1 and 2:

1. Turn the vehicle on or to accessory mode. A DIC welcome message may indicate the driver number of the current remote key. See “Identifying Driver Number” previously in this section.
2. Adjust all available memory features to the desired driving position.
3. Press and release SET; a beep will sound.
4. Immediately upon releasing SET, press and hold memory button 1 or 2 matching the current Driver’s remote key number until two beeps sound. If too much time passes between releasing SET and pressing 1 or 2, the two beeps will not sound indicating memory position were not saved. Repeat Steps 3 and 4 to try again.
5. Repeat Steps 1–4 for the other remote key 1 or 2 using the other 1 or 2 memory button.

It is recommended to save the preferred driving positions to both 1 and 2 if you are the only driver. To save the common exit seating position to Bthat is used by all drivers for Manually Recalling Seating Positions and Auto Seat Exit Memory Recall features, repeat Steps 1– 4 usingB, the exit button.

Manually Recalling Seating Positions
Press and hold 1, 2, or Bbutton until the recall is complete, to recall the positions previously saved to that button. Manual Memory recall movement for 1, 2 or Bbuttons may be initiated and will complete to the saved memory position if the vehicle is in or out of P (Park).

Enabling Automatic Recalls

• Seat Entry Memory moves the driver seat to the selected 1 or 2 position when the vehicle is started. Select Settings > Vehicle > Seating Position > Seat Entry Memory > ON or OFF. See “Auto Seat Entry Memory Recall” later in this section.
• Seat Exit Memory moves the driver seat to the preferred exit position of the B button when the vehicle is turned off and the door is opened. Select Settings > Vehicle > Seating Position > Seat Exit Memory > Select ON or OFF. See “Auto Seat Exit Memory Recall” later in this section.

Auto Seat Entry Memory Recall
Seat Entry Memory will automatically begin movement to the seating positions of the 1 or 2 button corresponding to the driver’s remote key number 1 or 2 detected by the vehicle when:

• The vehicle is turned ON.
• Seating positions have been previously saved to the same 1 or 2 button. See “Saving Seating Positions” previously in this section.
• Seat Entry Memory is enabled. See “Enabling Automatic Recalls” previously in this section.
• The vehicle is in P (Park).

Seat Entry Memory Recall will continue if the vehicle is shifted out of P (Park) prior to reaching the saved memory position. If the saved memory seat position does not automatically recall, verify the recall is enabled. See “Enabling Automatic Recalls” previously in this section. If the memory seat recalls to the wrong position, the driver’s remote key number 1 or 2 may not match the memory button number positions they were saved to. Try the other remote key or try saving the positions to the other 1 or 2 memory button. See “Saving Seating Positions” previously in this section. Automatic Seat Entry Memory recalls are only available for driver’s remote key numbers 1 and 2. Remote keys 3–8 will not provide Seat Entry Memory recalls.

Auto Seat Exit Memory Recall
Seat Exit Memory will begin movement to the seating position of the B button when:

• The vehicle is turned off and the driver door is open or opened within a short time.
• A seating position has been previously been saved to the B memory button. See “Saving Seating Positions” previously in this section.
• Seat Exit Memory is enabled. See “Enabling Automatic Recalls” previously in this section.
• The vehicle is in P (Park).

Seat Exit Memory recall will continue if the vehicle is shifted out of P (Park) prior to reaching the saved memory position. Seat Exit Memory is not linked to the driver’s remote key. The seating position saved toBis used for all drivers.

Cancel Memory Seating Recalls

• During any memory recall:
  • Press a power seat control
  • Press SET memory button
• During Manual memory recall:
  • Release 1, 2, or Bmemory button
• During Auto Seat Entry Memory Recall:
  • Turn vehicle off\ Press SET, 1, 2, or B memory buttons
• During Auto Seat Exit Memory Recall:
  • Press SET, 1, 2, or B memory buttons

FAQs

Useful Link

Download link: https://www.cadillac.com/support/vehicle/manuals-guides

2023 Cadillac XT6 SUPER CRUISE Convenience and Personalization Guide