2024 Cadillac LYRIQ Displays Control System Guidelines

2024 Cadillac LYRIQ Displays Control System Guidelines

As car technology is always changing, the 2024 Cadillac LYRIQ is at the top of the list. It is the ultimate in luxury and innovation. The cutting-edge Displays Control System is one of its most impressive features. It’s a technology marvel that changes the way you drive. This complex interface works with all of the car’s features without any problems, creating an easy-to-understand control center for the driver and guests. The LYRIQ’s Displays Control System has high-resolution displays that give you a futuristic panel with clear and bright images. Its ergonomic design puts accessibility first, making sure that the driver can easily reach all the information and controls they need. It’s easy and fun to switch between the many features, such as entertainment options and climate settings, that make the journey in this gem of an automobile even better. The 2024 Cadillac LYRIQ not only sets a new standard for how electric cars should look but also for how smart and engaging car technology should be.

2024 Cadillac Lyriq Review, Specs, Price, And Mileage (Brochure)

Information Displays

Charging

Important Information about Electric Vehicle Charging

• Charging an electric vehicle and increased charging rates can stress a building’s electrical system more than a typical household appliance.
• Before plugging the charge cord into an electrical outlet for the first time, have a qualified electrician inspect and verify the electrical system (electrical outlet, wiring, junctions, and protection devices) for heavy-duty service at a 12 amp continuous load.
• Check electrical outlets often, as they may wear out with normal use or become damaged over time, making them unsuitable for electric vehicle charging.
• Check the electrical outlet/plug while charging. If the electrical outlet/plug appears hot, discontinue using it immediately and have the electrical outlet serviced by a qualified electrician.
• When charging outdoors, use a weatherproof electrical outlet.
• Mount the charging cord to reduce strain on the electrical outlet/plug.
• Do not place the charge cord in a position where there is a risk of it being submerged in water.

Danger
Improper use of portable electric vehicle charge cords may cause a fire, electrical shock, or burns, and may result in damage to property, serious injury,
or death.

• Do not use extension cords, multi-outlet power strips, splitters, grounding adapters, surge protectors, or similar devices.
• Do not use an electrical outlet that is worn or damaged, or will not hold the plug firmly in place.
• Do not use an electrical outlet that is not properly grounded.
• Do not use an electrical outlet that is on a circuit with other electrical loads.

Charging App
The Charging app provides access to features that help you to review and manage charging preferences. To launch the Charging app from the infotainment home screen, select the Charging icon. There are three selections to choose from: Next Charge, Schedule, and Settings. When you launch Charging for the first time, the Next Charge screen will display.

Next Charge
To view the current charging status on the infotainment screen, select On the Next Charge screen, you can review information for the next charging session and specify if you want to Charge Now or Charge Later.

Charge Now
Charge Now is the default charging mode for your vehicle. The vehicle begins charging immediately when it is plugged in and authenticated at the charging location. With Charge Now selected, the screen displays:

• Text indicating that the vehicle will charge immediately when plugged in.
• The estimated time at which the vehicle will reach the desired charge level
• Target Charge Level Gauge: The percentage at which the vehicle will stop charging. The gauge also displays an estimate of the vehicle’s range upon completing the charging session.

Warning
Do not charge your vehicle’s battery above 80% charge if you are going to drive down long, steep grades such as mountain passes. This provides room in the battery for regenerative braking to supplement your conventional brakes during the descent. This is especially important when towing a trailer, which puts additional stress on your vehicle’s braking system.
See Hill and Mountain Roads 0 168 for important information about driving on grades.

The default charge level is 80% when plugged in to protect battery life. To set a different charge level, drag the circular marker on the Target Charge Level Gauge to the preferred value. To lower the desired charge level, drag the Charge Level marker counterclockwise, and to increase it drag the marker clockwise. The charge level can also be changed by selecting «and ª inside the gauge on the screen. The Multi-Function Controller (MFC) on the center console can also be used to set the charge level by rotating it clockwise or counterclockwise when the Target Charge Level Gauge is highlighted. The range estimate updates once the desired charge level is set. To optimize battery health, the minimum allowable charge level is determined by the vehicle.

Charge Later
Instead of charging immediately to a desired charge level, you may choose to delay the charge to the vehicle and have it completed by your desired departure time. This may be a more economical choice and a more efficient use of energy when charging at home. To use this mode, touch Charge Later on the Next Charge screen. With Charge Later selected, the screen displays:

• Text indicating that your vehicle will delay charging to be ready by the time specified.
• The ability to set the desired time at which the vehicle will finish charging and be ready for departure.
• Target Charge Level Gauge: Ability to set the percentage at which the vehicle will stop charging. The gauge also displays an estimate of the vehicle’s range upon completing the charging session.
• Preconditioning: Ability to heat or cool the cabin to your desired temperature using energy from the charger. Energy from the battery is not used to condition the cabin, ensuring the vehicle gets the maximum range from the charging session. Preconditioning happens at the end of the charge, and right before the departure time.

To set the time at which the vehicle will complete the charge and be ready for departure:
Drag each value up or down within the time selector until the preferred time is selected. The time selector can also be modified using the MFC on the center console by turning the knob when the preferred value is highlighted. If the desired charge level cannot be reached by the selected time, a message will display that one of the two preferences must be adjusted. To adjust the desired charge level in Charge Later mode, see “Charge Now” earlier in this section. Setting the Preconditioning preference: Select the switch to turn on Preconditioning. The Preconditioning temperature can be adjusted by selecting Preconditioning on this screen, or in Settings.

Active Charging
During an active charging session, the Charging screen displays and continuously updates the following items:

• The current charging status.
• The range the vehicle is capable of driving at the current charge level.
• Range accumulation per hour of charging.
• The estimated time at which the vehicle will reach the desired charge level.
• Target Charge Level Gauge: The current charge level value is represented as a percentage and a colored section of the circular gauge.

To update the desired charge level for the active charging session, drag the marker on the Target Charge Level Gauge. Selecting the Stop Charge button at any time ends the active charging session. For information on beginning a charging session, see Plug-In Charging 0 238. For Level 1 chargers, you can also select the appropriate charge cord limit for your location. This determines how much current can flow from an electrical outlet to the vehicle battery. It also ensures proper charge time estimates. When the charge cord limit is changed to the highest setting on a 120–volt circuit a notification is displayed.
If no Home Charge Location is set, the Level 1 cord limit will revert to the lowest setting every time the vehicle is shifted out of (P) Park. Range and charge time estimates fluctuate depending on some factors such as charge cord level/limit, battery temperature, and outside air temperature. To learn more about the vehicle battery see Plug-In Charging 0 238. The peek-in charging screen can be used to monitor your vehicle’s charge status when the vehicle is off, see Instrument Cluster 0 92. To monitor the charging status remotely, download the My Cadillac app on your mobile device.

Fast Charging
If equipped, the vehicle will immediately begin charging when plugged into a fast charge station. While fast charging, the vehicle will bypass any schedule or departure time selection. See Plug-In Charging 0 238.

Charge Assist
To find a charge station with the infotainment screen, select D. The choices available for Charge Assist include Nearby, Favorites, Routes, or Accounts. Additionally, you can filter the list of shown charge stations by selecting J above the list.

Nearby
Displays nearby stations. When a station name is selected, details of the selected charge station are displayed on the screen. Station Details displays Station Info, Connectors, and Station Photos. With Station Info selected, the screen displays:

• Name of the charge station
• Number of ports available
• Estimated charge percentage remaining upon arrival
• Charge station address
• Favorites button
• Navigation button

The Connector screen displays the connector types and availability. From here you can select a connector to see pricing details and charging speed. You can start a charging session by selecting the Start Charging button. The Station Photos screen displays photos of the selected charge station.

Favorites
Displays a list of your favorite stations. You can favorite stations from the Station Details screen.

Routes
Allows you to access routes planned and saved on the My Cadillac app. To activate a route, touch the navigation icon to start route guidance.
Instruments and Controls 109

Accounts
Allows you to view charge provider accounts that you have linked in the My Cadillac app, and pre-pay for charging. You can also choose to be notified when you are approaching one of your providers’ stations.

Schedule
SelectE to schedule a custom charging plan for each day of the week. When the vehicle is plugged in at the Home Charge Location, the Schedule feature will automatically charge to the desired charge level and precondition the cabin by the time set in the Schedule. This feature acts as a more customizable Charge Later setting than the one on the Next Charge screen.

Creating a Schedule
To create a schedule, touch Create Schedule. If there is no Home Charge Location set, you will be prompted to create one. The Charging Schedule dialog displays:

• Days of the week.
• A value selector for setting the desired charge level.
• A time selector for setting the time the vehicle will reach the desired charge level.
• Preconditioning: Allows the vehicle to heat or cool the cabin to the desired temperature by using energy from the charger.
• A z allows you to close the Charging Schedule screen.
• Save & Close button: Applies any changes made and exits the dialog.

Days can be assigned to the schedule. Days of the week are represented in toggles containing their first letter. Touching each day illuminates the graphic, confirming that the day is assigned to the schedule. Touching a second time unassigns days from this schedule, dimming the toggle once again. Select all days you wish to adhere to the settings in this schedule. If there are multiple charge schedules, days must be unassigned from their current schedule before they can be assigned to a new one. Once completed with the charging schedule, select the Save & Close button to finish creating the schedule. On days that are not assigned a schedule, the vehicle will begin charging to 80% as soon as it is plugged in unless otherwise specified on the Next Charge screen. Home Charge Schedule can be turned ON or OFF. To enable or disable all charging schedules, select the toggle switch next to Home Charge Schedule on the Schedule screen.

Modifying and Deleting Charge Schedules
To modify a schedule, select the card on the Schedule screen. This will open a screen. Make the desired changes and select the Save & Close button when finished. To delete the schedule, select the Delete Schedule button and confirm your decision when prompted.

Charge Settings
To view and change the Charge Settings, select F. Use this screen to set vehicle charging preferences. Touching any item will display options for specifying their behavior.
The Settings screen displays:

Home Charge Location
With a Home Charge Location set, the vehicle can determine whether it is plugged in at home and will charge according to any existing schedules. The Home Charge Location can be changed or deleted on this screen.
The wireless service and GPS satellite technologies must be available and operating for features to function properly. These systems may not operate if the battery is disconnected, or if the vehicle has been off for an extended period. If GPS is unavailable, a message displays on the infotainment screen. GPS functionality may resume after the next time you drive the vehicle.

Notifications
This section contains on/off preferences for multiple notifications triggered during the Charging session.

Charge Status Feedback: When on, your vehicle will chirp to accompany changes in the charging status.

Charge Cord Unplugged Alert: When on and your vehicle is locked, the horn will sound and the headlamps will flash if the charge cord becomes unplugged.

Charge Power Loss Alert: When on, your vehicle will chirp for an extended period if charging power is cut off.
Fast Charge Prep
If equipped, adjust the battery to the optimal temperature for quicker Fast Charging. This should be done before charging at a Fast Charger.
Depending on the outside and battery temperature, battery conditioning could take longer to reach the optimal temperature.
When using Google Maps, the Fast Charge Prep feature begins automatically when a Fast Charge station is added to your route via the A on the infotainment screen.

Preconditioning Temperature
Allows you to set the preferred cabin temperature. During a planned charging session at the Home Charge Location, the vehicle cabin is warmed or cooled to this temperature if set to ON in either the Charge Later screen or in an active Schedule.

Preferred Charge Times
Allows you to enable preferred charge time windows for the Home Charge Location during both weekday and weekend planned charging sessions. It does so whether the vehicle is set to Charge Later or observing a scheduled charge. This allows for charging at a lower cost by prioritizing charging during the electrical provider’s off-peak period. The vehicle will use these times to reach the desired charge level by the scheduled time. If the vehicle cannot reach the desired charge level within these times, it will charge as needed outside of this time window.

Driver Information Center (DIC)
The DIC is displayed in the instrument cluster. It shows the status of many vehicle systems. DIC information is broken down into three main zones:

Control Panel: A touchscreen display to the left of the instrument cluster.

Left Zone: Displays on the instrument cluster to the left of the speedometer.

Right Zone: Displays on the instrument cluster to the right of the speedometer.
Use the thumbwheel to scroll to the previous or next selection. V: Press the thumbwheel to open a menu or select a menu item. Press and hold to reset certain displays. DIC Information Display Options Select which info display to view by selecting Add to Driver Display in the Vehicle Status on the infotainment display.

DIC Information Display Options
The following is the list of all possible DIC information displays and their locations. Some of the information displays may not be available for your particular vehicle.

Control Panel Trip 1 or Trip 2 and Average Fuel Economy: The Trip display shows the current distance traveled, in either kilometer (km) or miles (mi), since the trip odometer was last reset. To reset the current trip, touch and hold the touchscreen display when the trip odometer is displayed.

The Average Fuel Economy display shows the approximate average liters per
100 kilometers (L/100 km), kilometers per liter (km/L), or miles per gallon (mpg). This number is calculated based on the number of L/100 km (mpg) or km/L recorded since the last time this menu item was reset. This number reflects only the approximate average fuel economy that the vehicle has right now and will change as driving conditions change. The Average Fuel Economy can be reset along with the trip odometer by touching and holding the touchscreen display when the trip odometer is displayed.

Left Zone
Time/Date: Displays current date and time information.

Auto Lane Change: Displays the status of a driver-requested lane change when Super Cruise is active. See Super Cruise 0 206.

Average Speed: This shows the average speed of the vehicle in kilometers per hour (km/h) or miles per hour (mph). This average is calculated based on the various vehicle speeds recorded since the last reset of this value. The average speed can be reset by touching the reset on the vehicle status screen.

Timer: This display can be used as a timer. To start the timer, touch Start while this display is active. The display will show the amount of time that has passed since the timer was last reset. To stop the timer, touch Stop briefly while this display is active and the timer is running. To reset the timer to zero, touch and hold Reset while this display is active.

Battery Voltage: Shows the current battery voltage.

Oil Life: Shows an estimate of the oil’s remaining useful life. If REMAINING OIL LIFE 99% is displayed, that means 99% of the current oil life remains.

When the remaining oil life is low, the CHANGE ENGINE OIL SOON message will appear on the display. The oil should be changed as soon as possible. See Engine Oil 0 262. In addition to the engine oil life system monitoring the oil life, additional maintenance is recommended. See Maintenance Schedule 0 328.
The Oil Life display must be reset after each oil change. It will not reset itself. Do not reset the Oil Life display accidentally at any time other than when the oil has just been changed. It cannot be reset accurately until the next oil change. To reset, see Engine Oil Life System 0 264.

Engine Air Filter Life: Displays an estimate of the engine air filter’s remaining useful life and the state of the system. Engine Air Filter Life 95% means 95% of the current air filter life remains. Messages are displayed based on the engine air filter life and the state of the system. When the REPLACE AT NEXT OIL CHANGE message displays, the engine air filter should be replaced at the time of the next oil change. When the REPLACE NOW message displays, the engine air filter should be replaced as soon as possible. To reset, see Engine Air Filter Life System 0 265.

Fuel Economy: Displays information about current and average fuel economy.

Oil Pressure: Shows the engine oil pressure in kPa (kilopascals) or psi (pounds per square inch).

Engine Hours: Shows the total number of hours the engine has run.

Coolant Temperature: Shows the temperature of the coolant in either degrees Celsius (°C) or degrees Fahrenheit (°F). Transmission Fluid

Temperature: Shows the temperature of the automatic transmission fluid in either degrees Celsius (°C) or degrees Fahrenheit (°F).

Oil Temperature: Displays the current oil temperature in either degrees Celsius (°C) or degrees Fahrenheit (°F).

Tire Pressure: Shows the approximate pressures of all four tires. Tire pressure is displayed in either kilopascal (kPa) or pounds per square inch (psi). If the pressure is low, the value for that tire is shown in amber. See Tire Pressure Monitor System 0 291 and Tire Pressure Monitor Operation 0 292.

Driver Assistance: If equipped, shows information for Adaptive Cruise Control (ACC), Lane Keep Assist (LKA), and Forward Collision Alert (FCA).

Right Zone
Audio Now Playing: Displays the actively playing audio.

Navigation: Displays a variety of navigation information.

Phone: Displays a variety of call information.

Vehicle Status

The following are all possible vehicle status features. To access the vehicle status menu touch A from the list of home page icons displayed on the left side of the infotainment display. Vehicle status content is shown on cards that are grouped in option tabs that are displayed on the infotainment display. Touching a card on the infotainment display opens up a dialog box for that card. To select a desired option within a dialog box, touch the option and follow any message or alerts that may be displayed. Some options may be unavailable while driving. Touch Add to Driver Display to send the desired card to the Driver Information Center (DIC) on the instrument cluster. Touch Remove from Driver Display to remove the selected card from the instrument cluster. See Driver Information Center (DIC) 0 111.

Options
The following is the list of all possible cards and their locations. Some of the cards may not be available for your particular vehicle.

Overview
Displays an interactive 3-D rendered image of your vehicle that shows performance and health information.

Tires
Tire Pressure: Displays the approximate pressures of all four tires. Tire pressure is displayed in either kilopascal (kPa) or pounds per square inch (psi). If the pressure is low, the value for that tire is shown in amber. See Tire Pressure Monitor System 0 291 and Tire Pressure Monitor Operation When selected, the following options may be chosen in the dialog: Relearn Tire Pressure, Turn Off/On Leak Detection, Reset Leak Detection, and Add to Driver Display. When enabled, you will receive alerts when a fast and/or slow tire leak is detected. The Leak Detection speeds shown are either Tire Leak or Fast Leak. When disabled, you will still receive low tire pressure alerts. However, you will stop receiving additional alerts when a tire is leaking air.

Fluids & Filters

Oil Life: Displays an estimate of the oil’s remaining useful life. If REMAINING OIL LIFE 99% is displayed, that means 99% of the current oil life remains. When the remaining oil life is low, the CHANGE ENGINE OIL SOON message will appear on the display. The oil should be changed as soon as possible. See Engine Oil 0 262. In addition to the engine oil life system monitoring the oil life, additional maintenance is recommended. See Maintenance Schedule 0 328. When selected, the following options may be chosen in the dialog: Reset, and Add to Driver Display. The Oil Life must be reset after each oil change. It will not reset itself. Do not reset the Oil Life display accidentally at any time other than when the oil has just been changed. It cannot be reset accurately until the next oil change. To reset, see Engine Oil Life System 0 264.

Engine Air Filter Life: Displays an estimate of the engine air filter’s remaining useful life and the state of the system. Engine Air Filter Life 95% means 95% of the current air filter life remains. Messages are displayed based on the engine air filter life and the state of the system. When the REPLACE AT NEXT OIL CHANGE message displays, the engine air filter should be replaced at the time of the next oil change. When the REPLACE NOW message displays, the engine air filter should be replaced as soon as possible. When selected, the following options may be chosen in the dialog: Turn Off/On, Reset, and Add to Driver Display.

2024 Cadillac Lyriq Review, Specs, Price, And Mileage (Brochure)

Engine & Battery
Battery Voltage: Displays the current battery voltage. When selected, Add to Driver Display may be chosen in the dialog. Coolant

Temperature: Displays the temperature of the coolant in either degrees Celsius (°C) or degrees Fahrenheit (°F). When selected, Add to Driver Display may be chosen in the dialog.

Transmission Fluid Temperature: Displays the temperature of the automatic transmission fluid in either degrees Celsius (°C) or degrees Fahrenheit (°F).
When selected, Add to Driver Display may be chosen in the dialog.

Oil Pressure: Displays the engine oil pressure in kPa (kilopascals) or psi (pounds per square inch).
When selected, Add to Driver Display may be chosen in the dialog.

Oil Temperature: Displays the current oil temperature in either degrees Celsius (°C) or degrees Fahrenheit (°F).
When selected, Add to Driver Display may be chosen in the dialog.

Engine Hours: Displays the total number of hours the engine has run.
When selected, Add to Driver Display may be chosen in the dialog.

Fuel Economy
Fuel Economy: Displays average fuel economy, the best fuel economy over the selected distance, and a bar graph showing instantaneous fuel economy. Values are displayed in liters per 100 kilometers (L/100 km) or miles per gallon (mpg). This number reflects only the approximate fuel economy and changes frequently as driving conditions change. Only the best score can be reset. If the vehicle is equipped with an Active Fuel Management indicator, the engine operating mode may be shown in the bottom corner of this display.
When selected, the following options may be chosen in the dialog: Change Distance, Reset Best Score, and Add to Driver Display. The distance for average fuel economy and the best fuel economy can be changed to 40 km (25 mi), 80 km (50 mi), and 725 km (300 mi).

Head-Up Display (HUD)

Warning
If the HUD image is too bright or too high in your field of view, it may take you more time to see things you need to see when it is dark outside. Be sure to keep the HUD image dim and placed low in your field of view.

If equipped with HUD, some information about the operation of the vehicle is projected onto the windshield. The image is projected through the HUD lens on top of the instrument panel. The information appears as an image focused out toward the front of the vehicle.

Caution
If you try to use the HUD image as a parking aid, you may misjudge the distance and damage your vehicle. Do not use the HUD image as a parking aid.

The HUD information can be displayed in various languages. The speedometer reading and other numerical values can be displayed in either English or metric units. The language selection and the units of measurement are changed through the infotainment screen. See Settings 0 150.
HUD Display on the Windshield
Depending on how the vehicle is equipped, the HUD may display some of the following vehicle information and vehicle messages or alerts:

• Speed
• Audio
• Phone
• Navigation
• Driver Assistance Features
• Vehicle Messages

Some vehicle messages or alerts displayed in the HUD may be cleared by using the steering wheel controls.

The HUD control is on a touchscreen to the left of the instrument cluster

To adjust the HUD image:

1. Adjust the driver seat.
2. Start the vehicle.
3. Select HUD on the touchscreen to the left of the instrument cluster.
4. Use the icons to adjust the HUD as desired.

The HUD image will automatically dim and brighten to compensate for outside lighting. Adjust as needed.
The HUD image can temporarily light up depending on the angle and position of sunlight on the HUD image. This is normal.
Polarized sunglasses can make the HUD image harder to see.

HUD Options
If equipped, this feature under the HUD Options menu on the infotainment screen allows you to adjust the HUD image. This feature may only be available in P (Park).
Press the icons above and below to adjust the HUD image.

Speed Limit Style Adjustment
If equipped, the speed limit style can be changed to a speed limit bar or speed limit sign from the Options menu on the infotainment screen. The Multi-Function Controller (MFC) on the center console can be used while the Speed Limit Style is selected to change the speed sign style or to turn it off.

HUD Views
There are three views in the HUD. Some vehicle information and vehicle messages or alerts are available in all views.

English Shown, Metric Similar

Speed View: This displays the speedometer reading in English or metric units and the speed limit.
Some information only appears on vehicles that have these features, and when they are active.
English Shown, Metric Similar

Active Safety View: This displays the speed view along with a driver assistance graphic on the left. Driver assistance graphics show your vehicle, vehicle ahead, gap setting, and lane status information. In addition to driver assistance graphics, pedestrian advisory, and trailer sway indicators will be displayed. Some information only appears on vehicles that have these features, and when they are active.
English Shown, Metric Similar

Navigation View: This displays the speed view along with indicators for the vehicle ahead, Lane Departure Warning/Lane Keep Assist, trailer sway, and pedestrian advisory. Turn-by-turn navigation information is shown during the active route. The compass heading is displayed when navigation routing is not active. Some information only appears on vehicles that have these features, and when they are active.
Navigation turn-by-turn alerts shown in the instrument cluster may also be displayed in any HUD view.

Care of the HUD
Clean the inside of the windshield to remove any dirt or film that could reduce the sharpness or clarity of the HUD image. Clean the HUD lens with a soft cloth sprayed with glass cleaner. Wipe the lens gently, then dry it.

HUD Troubleshooting
Check that:

• Nothing is covering the HUD lens.
• The HUD brightness setting is not too dim or too bright.
• The HUD is adjusted to the proper height and rotation.
• Polarized sunglasses are not worn.
• The windshield and HUD lens are clean.

If the HUD image is not correct, contact your dealer. The windshield is part of the HUD system. See Windshield Replacement 0 275.

Vehicle Messages

Messages displayed on the Driver Information Center (DIC) indicate the status of the vehicle or some action that may be needed to correct a condition. Multiple messages may appear one after another. Vehicle status notifications are also sent to the infotainment display. Touching U on the infotainment display opens the notification drawer where all the active vehicle messages can be viewed. Depending on the message, you can schedule a service or find the nearest dealer. When there are active messages that can be viewed, a red dot appears on top of the notification icon on the infotainment display. The messages that do not require immediate action can be acknowledged and cleared by pressing the thumbwheel. The messages that require immediate action cannot be cleared until that action is performed. All messages should be taken seriously; clearing the message does not correct the problem.

If a SERVICE message appears, see your dealer.
Follow the instructions given in the messages. The system displays messages regarding the following topics:

• Service Messages
• Fluid Levels
• Vehicle Security
• Brakes
• Ride Control Systems
• Advanced Driver Assistance Systems. Cruise Control
• Lighting and Bulb Replacement
• Wiper/Washer Systems
• Doors and Windows
• Seat Belts
• Airbag Systems
• Engine and Transmission
• Tire Pressure
• Battery
• Steering

Propulsion Power Messages

REDUCED ACCELERATION DRIVE WITH CARE
This message displays when the vehicle’s propulsion power is reduced. A reduction in propulsion power can affect the vehicle’s ability to accelerate. If this message is on, but there is no observed reduction in performance, proceed to your destination. Under certain conditions, the performance may be reduced the next time the vehicle is driven. The vehicle may be driven while this message is on, but maximum acceleration and speed may be reduced. Anytime this message stays on or displays repeatedly, the vehicle should be taken to your dealer for service as soon as possible. Under certain operating conditions, propulsion will be disabled. Try restarting after the ignition has been off for two minutes.

PROPULSION POWER REDUCED DUE TO TEMPERATURE
This message displays when the vehicle is on, the battery temperature is low, and when the vehicle’s performance is limited. The duration of the limited vehicle performance depends, in part, on the high-voltage battery charge level. If the high voltage battery charge level is relatively high, as the vehicle is driven, the battery temperature will increase, and the vehicle will return to normal operation. If the high voltage battery charge level is relatively low the vehicle will not return to normal operation until charged. Keep the vehicle plugged in, even when fully charged, to keep the high-voltage battery temperature ready for the next drive. This is important when outside temperatures are extremely hot or cold.

Vehicle Speed Messages
SPEED LIMITED TO XXX KM/H (MPH)
This message shows that the vehicle speed has been limited to the speed displayed. The limited speed is protection for various propulsion and vehicle systems, such as lubrication, thermal, brakes, suspension, Teen Driver if equipped, or tires.

FAQs

Useful Link:

View Full PDF: 2024 Cadillac LYRIQ User Manual |Auto User Guide

2024 Cadillac Lyriq Review, Specs, Price, And Mileage (Brochure)

2024 Cadillac LYRIQ Instrument Cluster | How to use