Dashboard Instructions: 2016 Cadillac XTS Cluster Guide
The 2016 Cadillac XTS has a beautifully crafted cluster that functions as an advanced command center and seamlessly combines safety features and technology to improve driving dynamics. A symphony of warning symbols and indicators come to life within this painstakingly designed dashboard, serving as watchful guardians that alert the driver to important information. These visual cues are more than just symbols; they are a sophisticated language that guarantees both the safety of the vehicle’s occupants and the best possible performance, from tire pressure monitoring to engine diagnostics. The cluster transforms into a dynamic canvas in this immersive automotive environment, converting the complex interaction of the car’s numerous systems into an understandable and intuitive display. Come along with me as I take you through the subtle world of warning lights and indicators found in the 2016 Cadillac XTS cluster, where form and function seamlessly meld to create an unmatched driving experience.
2023 cadillac xt6 Specs, Price, Features, Mileage and Review
Instrument Cluster
English Base Cluster Shown, Metric Similar
English Uplevel Balanced Cluster Shown, Metric Similar
Reconfigurable Instrument Cluster
The uplevel cluster display layout can be changed.
Balanced Configuration
The Balanced configuration has three interactive display zones: one in the center of each of the gauges.
Enhanced Configuration
The Enhanced configuration has three interactive display zones.
Performance Configuration (V Sport Only)
The Performance configuration has two interactive display zones.
Use the five-way control on the right side of the steering wheel to move between the different display zones and scroll through the different displays.
To change the cluster configuration:
- Find the Options page in one of the interactive display zones on the cluster.
- Press SEL to enter the Options menu.
- Scroll down to highlight Display Layout. Then press SEL to select it.
- Each layout in the menu is represented by a small preview image of the display layout. Scroll up or down and highlight the selection. Press SEL to select the desired cluster configuration.
- Exit the Display Layout menu by pressing
Cluster Application Displays
The cluster can display information regarding Navigation, Audio, and
Phone. On the base cluster, a speedometer can also be displayed in the center zone.
Navigation
If there is no active route, a compass will be displayed. If there is an active route, press SEL to end route guidance or turn the voice
on or off.
Audio
While the Audio application page is displayed, press SEL to enter the Audio menu. In the Audio menu search for music, select from favorites, or change the audio source.
Phone
While the Phone application page is displayed, press SEL to enter the Phone menu. In the Phone menu, if there is no active phone call, view recent calls, select from favorites, or scroll through contacts. If there is an active call, mute the phone or switch to handset operation.
Cluster Options Menu
To enter the cluster Options menu
- Use the five-way control on the right side of the steering wheel to find the Options page in one of the interactive display zones on the cluster.
- Press SEL on the center of the five-way control to enter the Options menu.
Units: Press SEL while Units is highlighted to enter the Units menu. Choose English or metric units by pressing SEL while the desired item is highlighted. A checkmark will be displayed next to the selected item.
Info Pages: Press SEL while Info Pages are highlighted to select the items to be displayed in the DIC information displays.
Fav Button Options: Press SEL while Fav Button Options is highlighted to select between FAV Primary and SEEK Primary. This selection allows for the configuration of the 
steering wheel controls. When FAV Primary is selected, pressing will go to the next or previous favorite pressing and holding will seek. When SEEK Primary is selected, pressing will seek pressing holdingwill go to the next or previous favorite.
Tire Loading (If Equipped): Press SEL while Tire Loading is highlighted to change the tire loading setting. Choose Light (for comfort pressure of up to three people), Eco (for Eco pressure up to three people), or Max (for full loading) by pressing SEL while the desired item is highlighted.
Open Source Software: Press SEL while Open Source Software is highlighted to display open source software information.
Speedometer
The speedometer shows the vehicle’s speed in either kilometers per hour (km/h) or miles per hour (mph).
Odometer
The odometer shows how far the vehicle has been driven, in either kilometers or miles.
Trip Odometer
The trip odometer shows how far the vehicle has been driven since the trip odometer was last reset. The trip odometer is accessed and reset through the Driver Information Center (DIC).
Tachometer
The tachometer displays the engine speed in revolutions per minute (rpm).
Caution
If the engine is operated with the rpm’s in the warning area at the high end of the tachometer, the vehicle could be damaged, and the damage would not be covered by the vehicle warranty. Do not operate the engine with the rpm’s in the warning area.
Fuel Gauge
Base Level
Uplevel Balanced Configuration
When the ignition is on, the fuel gauge indicates how much fuel is left in the tank. There is an arrow near the fuel gauge pointing to the side of the vehicle the fuel door is on. When the indicator is empty, the low fuel light comes on. There still is a little fuel left, but the vehicle should be refueled soon. Here are four things that some owners ask about. None of these show a problem with the fuel gauge:
- At the service station, the fuel pump shuts off before the gauge reads full.
- It takes a little more or less fuel to fill up the gauge indicated. For example, the gauge may have indicated the tank was half full, but it took a little more or less than half the tank’s capacity to fill the tank.
- The gauge moves a little while turning a corner or speeding up.
- The gauge takes a few seconds to stabilize after the ignition is turned on, and goes back to empty when the ignition is turned off.
Boost Gauge (Performance Configuration Only)
Metric
English
This gauge indicates a boost under heavier throttle.
It displays the air pressure level in the intake manifold before it enters the engine’s combustion chamber.
The gauge is automatically centered at zero every time the engine is started. The actual boost is displayed from this zero point. Changes in ambient pressure, such as driving in mountains and changing weather, will slightly change the zero reading.
Engine Oil Temperature Gauge (Performance
Metric
English
This gauge shows the engine oil temperature.
If the gauge pointer moves into the high end, it means that the engine oil has overheated. If the vehicle has been operated under normal driving conditions, pull off the road, stop the vehicle, and turn off the engine as soon as possible.
Engine Coolant Temperature Gauge
Metric Base Level
English Base Level
Metric Uplevel Balanced Configuration Shown
English Uplevel Balanced Configuration Shown
This gauge measures the temperature of the vehicle’s engine. While driving under normal operating conditions, if the needle moves into the shaded area, the engine is too hot. Pull off the road, stop the vehicle, and turn off the engine as soon as possible.
FAQs
The dashboard displays essential information to the driver, such as vehicle speed, engine RPM, fuel level, and warning indicators.
Yes, drivers can often customize the layout and information displayed on the dashboard according to their preferences.
Typically, there are settings within the vehicle’s menu options that allow drivers to adjust the brightness of the dashboard display.
Some models may offer navigation instructions directly on the dashboard display, depending on the vehicle’s features and options.
Yes, the dashboard often provides maintenance reminders for tasks such as oil changes, tire rotations, and other routine maintenance.
Drivers can typically access the menu options using buttons or controls located on the steering wheel or dashboard.
Depending on the vehicle’s features, drivers may be able to pair their smartphones with the dashboard for hands-free calling, music streaming, and other functions.
Yes, the dashboard often displays real-time vehicle diagnostics, such as tire pressure, engine temperature, and more.
There are typically options within the vehicle’s menu settings to reset the trip odometer and other trip-related information.
Yes, fuel economy information is often available on the dashboard display, showing average fuel economy, current fuel consumption, and more.
Drivers can often switch between different display modes using buttons or controls on the steering wheel or dashboard.
Some models may offer a night mode option, which adjusts the brightness and color of the dashboard display for improved visibility at night.
Yes, drivers can often customize the layout of the dashboard information to prioritize the most relevant data for their driving needs.
Vehicle settings are typically accessible through the vehicle’s menu options on the dashboard display.
Depending on the vehicle’s features, drivers may be able to control the audio system directly from the dashboard display or steering wheel controls.
Useful Links
View Full PDF: 2016 Cadillac XTS Owner’s Manual| Auto User Guide
2023 cadillac xt6 Specs, Price, Features, Mileage, and Review