Display Guide: 2016 Cadillac XTS How to use Display Screen
With the 2016 Cadillac XTS, you’ve arrived at the pinnacle of luxury and technology in cars, making every drive an unforgettable adventure. At the center of this elegant car is a state-of-the-art Display Screen that infuses convenience and innovation into your travels. Get ready to explore this extensive Display Guide and discover all that your Cadillac XTS’s interactive interface has to offer. This guide will walk you through the many features and functions of the Display Screen, from easy navigation to customized settings, so you can fully utilize the power of technology at your fingertips. As we explore the nuances of the 2016 Cadillac XTS’s Display Screen, where form and function combine in the most opulent and effective way possible, get ready to enhance your driving experience.
2023 cadillac xt6 Specs, Price, Features, Mileage and Review
Information Displays
Driver Information Center (DIC)
The DIC displays are shown in the left and right interactive display zones on the instrument cluster. The displays show the status of many vehicle systems. The controls for the DIC are on the right steering wheel control.
: Press the five-way control to move up or down in a list.
: Press the five-way control to move between the interactive display zones in the cluster.
Press
to go back to the previous menu.
SEL (Select): Press the center to open a menu or select a menu item. Press and hold to reset values on certain screens.
DIC Information Display Options
The information displayed on the DIC can be turned on or off through the Settings menu.
- Press SEL while viewing the settings page in the center displays the zone on the cluster.
- Scroll to Info Pages and press SEL.
- Press to move through the list of possible information displays.
- Press SEL while an item is highlighted to select or deselect that item. When an item is selected, a checkmark will appear next to it.
DIC Information Displays
The following is the list of all possible DIC information displays. Some of the information displays may not be available for your particular vehicle.
Speed: Shows the vehicle speed in either kilometers per hour (km/h) or miles per hour (mph).
Trip 1 or Trip 2 (Base Cluster) / Trip 1 or Trip 2 and Average Fuel Economy (Uplevel Cluster): The Trip display shows the current distance traveled, in either kilometer (km) or miles (mi), since the trip odometer was last reset. The trip odometer can be reset by pressing and holding SEL while this display is active.
The Average Fuel Economy display shows the approximate average liters per 100 kilometers (L/100 km) or miles per gallon (mpg). This
number is calculated based on the number of L/100 km (mpg) recorded since the last time this menu item was reset. This number reflects only the approximate average fuel economy that the vehicle has right now and will change as driving conditions change. The Average
Fuel Economy can be reset along with the trip odometer by pressing
and holding SEL while this display is active.
Fuel Range: This shows the approximate distance the vehicle can be driven without refueling. LOW will be displayed when the vehicle is low on fuel. The fuel range estimate is based on an average of the vehicle’s fuel economy over recent driving history and the amount of fuel remaining in the fuel tank.
Average Fuel Economy: This shows the approximate average liters per 100 kilometers (L/100 km) or miles per gallon (mpg). This number is calculated based on the number of L/100 km (mpg) recorded since the last time this menu item was reset. This number reflects only the approximate average fuel economy that the vehicle has right now and will change as driving conditions change. The Average Fuel The economy can be reset by pressing and holding SEL while this display is active.
Instantaneous Fuel Economy: This shows the current fuel economy in either litre per 100 kilometers (L/100 km) or miles per gallon (mpg). This number reflects only the approximate fuel economy that the vehicle has right now and changes frequently as driving conditions change.
Average Speed: This shows the average speed of the vehicle in kilometers per hour (km/h) or miles per hour (mph). This average is calculated based on the various vehicle speeds recorded since the last reset of this value. The average speed can be reset by pressing and holding SEL while this display is active.
Timer: This display can be used as a timer. To start the timer, press SEL while this display is active. The display will show the amount of time that has passed since the timer was last reset. To stop the timer, press SEL briefly while this display is active and the timer is running. To reset the timer to zero, press and hold SEL while this display is active.
Compass: Shows the direction the vehicle is driving. Turn Arrow: Shows the next maneuver when using route guidance.
Turn Arrow: Shows the next maneuver when using route guidance.
Estimated Time to Arrival: This shows the estimated time until arrival at your destination.
Distance to Destination: Shows the distance to the destination when using route guidance.
Speed Limit: Shows sign information, which comes from a roadway database in the onboard navigation.
Speed Warning: Allows the driver to set a speed that they do not want to exceed. To set the Speed Warning, press SEL when the Speed The warning is displayed. Press
to adjust the value. This feature can be turned off by pressing and holding SEL while viewing this page. If the selected speed limit is
exceeded, a pop-up warning is displayed and a chime may sound.
Best Fuel Economy: Displays average fuel economy, the best fuel economy over the selected distance, and a bar graph showing instantaneous fuel economy.
Driver Assistance (Uplevel Cluster): Shows information for Lane Keeping Assist (LKA), Lane Departure Warning (LDW), and Forward Collision Alert (FCA).
Performance Timer (V Sport Only): Shows the last performance time recorded. Press and hold SEL while viewing the performance timer
to reset and stop the timer. Press SEL to enter the performance timer
menu. In the menu, set the start speed, set the end speed, and reset the timer.
Cruise Set Speed: This shows the speed the cruise control or Adaptive Cruise Control is set to.
Follow Distance: Shows the current following distance to the vehicle ahead.
Battery Voltage: Shows the current battery voltage.
Oil Life: Shows an estimate of the oil’s remaining useful life. If the REMAINING OIL LIFE of 99% is displayed, that means 99% of the current oil life remains.
When the remaining oil life is low, the CHANGE ENGINE OIL SOON message will appear on the display. The oil should be changed as soon as possible. In addition to the engine oil life system monitoring the oil life, additional maintenance is recommended in the Maintenance Schedule. The Oil Life display must be reset after each oil change. It will not reset itself. Do not reset the Oil Life displays accidentally at any time other than when the oil has just been changed. It cannot be reset accurately until the next oil change. To reset the engine oil life system, press and hold SEL for several seconds while the Oil Life display is active.
Tire Pressure: Shows the approximate pressures of all four tires. Tire pressure is displayed in either kilopascal (kPa) or in pounds per square inch (psi). If the pressure is low, the value for that tire is shown in amber.
Vehicle Odometer (Base Cluster): Shows the odometer.
Blank Page: Allows for no information to be displayed in the cluster info display areas.
Head-Up Display (HUD)
Warning
If the HUD image is too bright or too high in your field of view, it may take you more time to see things you need to see when it is HUD image dim and placed low in your field of view.
If equipped with HUD, some information concerning the operation of the vehicle is projected onto the windshield. The image is projected through the HUD lens on top of the instrument panel. The information appears as an image focused out toward the front of the vehicle.
Caution
If you try to use the HUD image as a parking aid, you may misjudge the distance and damage your vehicle. Do not use the HUD image as a parking aid.
The HUD information can be displayed in various languages in some vehicles. The speedometer reading and other numerical values
can be displayed in either English or metric units.
The language selection is changed through the radio and the units of measurement are changed through the instrument cluster.
HUD Display on the Vehicle Windshield
The HUD may display some of the following vehicle information and vehicle messages or alerts:
- Speed
- Tachometer
- Audio
- Phone
- Navigation
- Collision Alert
- Cruise Control
- Lane Departure or Lane Keeping Assist
- Low Fuel
Some vehicle messages or alerts displayed in the HUD may be cleared by using the steering wheel controls.
The HUD control is to the left of the steering wheel To adjust the HUD image:
- Adjust the driver seat.
- Start the engine.
Use the following settings to adjust the HUD.
(Image Adjustment): Press down or lift to center the HUD image. The HUD image can only be adjusted up and down, not side to side.
INFO(Display View): Press to select the display view. Each press will change the display view.
(Image Brightness) : Lift up and hold to brighten the display. Press down and hold to dim the display. Hold down to turn the display off.
The HUD image will automatically dim and brighten to compensate for outside lighting. The HUD brightness control can also be adjusted as needed.
The HUD image can temporarily light up depending on the angle and position of the sunlight on the HUD display. This is normal.
Polarized sunglasses could make the HUD image harder to see.
HUD Views
There are four views in the HUD. Some vehicle information and vehicle messages or alerts may be displayed in any view.
Speed View: This display gives the speedometer reading (in English or metric units), speed limit, Adaptive Cruise Control speed, Lane Departure Warning, and Vehicle Ahead indicator. Some information only appears on vehicles that have these features, and when they are active.
Audio/Phone View: This displays the speed view along with audio/ phone information. The current radio station, media type, and incoming calls will be displayed.
All HUD views may briefly display audio information when the driver uses the steering wheel controls to adjust the audio settings appearing in the instrument cluster.
Incoming phone calls appearing in the instrument cluster may also be displayed in any HUD view.
Navigation View: This display includes the information in the speed view along with Turn-by-Turn Navigation information in some vehicles. When navigation routing is not active “No Route Active” is displayed.
Navigation Turn-by-Turn Alerts shown in the instrument cluster may also be displayed in any HUD view.
Performance View: This displays the speedometer reading, rpm reading, transmission positions, and gear shift indicator.
Care of the HUD
Clean the inside of the windshield to remove any dirt or film that could reduce the sharpness or clarity of the HUD image.
Clean the HUD lens with a soft cloth sprayed with glass cleaner. Wipe the lens gently, then dry it.
HUD Troubleshooting
Check that:
- Nothing is covering the HUD lens.
- HUD brightness setting is not too dim or too bright.
- HUD is adjusted to the proper height.
- Polarized sunglasses are not worn.
- The windshield and HUD lens are clean.
If the HUD image is not correct, contact your dealer.
The windshield is part of the HUD system. If the windshield needs replacing,
Vehicle Messages
Messages displayed on the DIC indicate the status of the vehicle or some action that may be needed to correct a condition. Multiple messages may be displayed one after the other.
The messages that do not require immediate action can be acknowledged and cleared by pressing SET/CLR. The messages that require immediate action cannot be cleared until that action is performed. All messages should be taken seriously and clearing the messages does not correct the problem.
The following are some of the vehicle messages that may be displayed depending on your vehicle content.
Battery Voltage and Charging Messages
BATTERY SAVER ACTIVE
This message is displayed when the vehicle has detected that the battery voltage is dropping beyond a reasonable point. The battery-saver system starts reducing features of the vehicle that may be noticed. At the point that features are disabled, this message displays. Turn off unnecessary accessories to allow the battery to recharge.
LOW BATTERY
This message is displayed when the battery voltage is low. See Battery – North America
SERVICE BATTERY CHARGING SYSTEM
This message is displayed when there is a fault in the battery charging system. Take the vehicle to your dealer for service.
TRANSPORT MODE ON
This message is displayed when the vehicle is in transport mode. Some features can be disabled while in this mode, including Remote Keyless Entry (RKE), remote start, and the vehicle alarm system. Take the vehicle to your dealer for service to turn the transport mode off. Brake System Messages
BRAKE FLUID LOW
This message is displayed when the brake fluid level is low.
STEP ON THE BRAKE TO RELEASE PARK BRAKE
This message is displayed if you attempt to release the Electric Parking Brake without the brake pedal applied.
RELEASE PARKING BRAKE
This message is displayed if The Electric Parking Brake is on while the vehicle is in motion.
SERVICE BRAKE ASSIST
This message may be displayed when there is a problem with the brake boost assist system. When this message is displayed, the brake boost assist motor might be heard operating and you might notice pulsation in the brake pedal. This is normal under these conditions. Take the vehicle to your dealer for service.
SERVICE PARKING BRAKE
This message is displayed when there is a problem with the parking brake. Take the vehicle to your dealer for service.
Compass Messages
The compass display will be blank if the vehicle temporarily loses
communication with the Global Positioning System (GPS).
Cruise Control Messages
ADAPTIVE CRUISE SET TO XXX
This message is displayed when the Adaptive Cruise Control (ACC) speed is set.
ADAPTIVE CRUISE TEMPORARILY UNAVAILABLE
This message is displayed when attempting to activate Adaptive Cruise Control (ACC) when it is temporarily unavailable. The ACC system does not need service.
This can occur under the following conditions:
- The radar is not clean. Keep the radar sensors free of mud, dirt, snow, ice, and slush. Clean the entire front and/or rear of the vehicle.
- Heavy rain or snow is interfering with the radar object detection or camera performance.
CRUISE SET TO XXX
This message is displayed when the cruise control speed is set.
NO CRUISE BRAKING GAS PEDAL APPLIED
This message is displayed when Adaptive Cruise Control (ACC) is active and the driver presses the gas pedal. When this occurs, ACC will not brake.
SERVICE ADAPTIVE CRUISE CONTROL
This message is displayed when the Adaptive Cruise Control (ACC) needs service. Take the vehicle to your dealer.
SHIFT TO PARK BEFORE EXITING
This message may be displayed if Adaptive Cruise Control (ACC) is engaged in holding the vehicle at a stop, and the driver attempts to exit the vehicle. Put the vehicle in P (Park) before exiting.
Door Ajar Messages
DOOR OPEN
A door open symbol will be displayed on the DIC showing that the door is open. If the vehicle has been shifted out of P (Park), a DOOR The OPEN message will also be displayed. Close the door completely.
HOOD OPEN
This message will display along with a hood open symbol when the hood is open. Close the hood completely.
REAR ACCESS OPEN
This message will display along with a symbol when the liftgate is open. Close the liftgate completely.
Engine Cooling System Messages
A/C OFF DUE TO HIGH ENGINE TEMP
This message is displayed when the engine coolant becomes hotter than the normal operating temperature. To avoid added strain on a hot engine, the air conditioning compressor automatically turns off. When the coolant temperature returns to normal, the air conditioning compressor turns back on. The vehicle can continue to be driven.
If this message continues to appear, have the system repaired by your dealer as soon as possible to avoid damage to the engine.
ENGINE OVERHEATED — IDLE ENGINE
This message is displayed when the engine coolant temperature is too hot. Stop and allow the vehicle to idle until it cools down.
ENGINE OVERHEATED — STOP ENGINE
This message displays continuous chime sounds if the engine cooling system reaches unsafe temperatures for operation. Stop and turn off the vehicle as soon as it is safe to do so to avoid severe damage. This message clears when the engine has cooled to a safe operating temperature.
HIGH COOLANT TEMPERATURE
This message displays if the coolant temperature is hot.
Engine Oil Messages
CHANGE ENGINE OIL SOON
This message is displayed when the engine oil needs to be changed. When you change the engine oil, be sure to reset the oil life system.
ENGINE OIL HOT, IDLE ENGINE
This message is displayed when the engine oil temperature is too hot. Stop and allow the vehicle to idle until it cools down.
ENGINE OIL LOW — ADD OIL
On some vehicles, this message displays when the engine oil level may be too low. Check the oil level before filling to the recommended level. If the oil is not low and this message remains on, take the vehicle to your dealer for service.
OIL PRESSURE LOW — STOP ENGINE
This message displays if low oil pressure levels occur. Stop the vehicle as soon as safely possible and do not operate it until the cause of the low oil pressure has been corrected. Check the oil as soon as possible and have the vehicle serviced by your dealer.
Engine Power Messages
ENGINE POWER IS REDUCED
This message is displayed when the vehicle’s engine power is reduced. Reduced engine power can affect the vehicle’s ability to accelerate. If this message is on, but there is no reduction in performance, proceed to your destination. The performance may be reduced the next time the vehicle is driven. The vehicle may be driven at a reduced speed while this message is on, but maximum acceleration and speed may be reduced. Anytime this message stays on, the vehicle should be taken to your dealer for service as soon as possible.
Fuel System Messages
FUEL LEVEL LOW
This message displays when the vehicle is low on fuel. Refuel as soon as possible.
Key and Lock Messages
NO REMOTE DETECTED
This message displays when the transmitter battery may be weak.
See “Starting the Vehicle with a Low Transmitter Battery” under Remote Keyless Entry (RKE) System Operation.
NO REMOTE DETECTED PRESS BRAKE TO RESTART
This message displays when attempting to turn off the vehicle and the RKE transmitter is no longer detected. Restarting is allowed without the RKE transmitter for five minutes. Press the brake pedal and start button to restart the vehicle.
NUMBER OF KEYS PROGRAMMED
This message is displayed when programming new keys to the vehicle.
REMOTE LEFT IN VEHICLE
This message is displayed when leaving the vehicle with the RKE transmitter still inside.
REPLACE THE BATTERY IN THE REMOTE KEY
This message is displayed when the battery in the RKE transmitter needs to be replaced.
Lamp Messages
AFL (ADAPTIVE FORWARD LIGHTING) LAMPS NEED SERVICE
This message is displayed when the AFL system is disabled and needs service. See your dealer.
AUTOMATIC LIGHT CONTROL ON
This message is displayed when the exterior lamp control is in AUTO and the lights have turned on.
AUTOMATIC LIGHT CONTROL OFF
This message is displayed when the exterior lamp control is in AUTO and the lights have turned off.
XXX TURN INDICATOR FAILURE
This message is displayed if the turn signal has been left on. Turn off the turn signal.
Object Detection System Messages
24 GHz RADARS OFF
This message is displayed when driving in certain areas where there may be radar interference. Adaptive Cruise Control (ACC), Forward Collision Alert (FCA), and the Front Automatic Braking (FAB) System may not work or may not work as well. The vehicle does not need service.
AUTOMATIC COLLISION PREP OFF
This message is displayed when the Front Automatic Braking (FAB) system has been turned off.
AUTOMATIC COLLISION PREP REDUCED
This message is displayed when the Front Automatic Braking (FAB) system has been set to the Alert setting. This setting disables most FAB functions. Some last-second automatic braking capability is still provided with the Alert setting, but braking is less likely to occur.
AUTOMATIC COLLISION PREP UNAVAILABLE
This message is displayed when the Front Automatic Braking (FAB) system has been unavailable for some time. The FAB System does not need service.
This can occur under the following conditions:
- The front of the vehicle or windshield is not clean. Keep these areas clean and free of mud, dirt, snow, ice, and slush.
- Heavy rain or snow is interfering with the object detection performance.
This message may also be displayed if there is a problem with the StabiliTrak system.
FORWARD COLLISION ALERT OFF
This message is displayed when the Forward Collision Alert has been turned off.
FRONT CAMERA BLOCKED CLEAN WINDSHIELD
This message is displayed when the camera is blocked. Cleaning the outside of the windshield behind the rearview mirror may correct the issue. The Lane Departure Warning (LDW) the system will not operate. Adaptive Cruise Control (ACC), Forward Collision Alert (FCA), and Front Automatic Braking (FAB) The system may not work or may not work as well.
LANE DEPARTURE WARNING UNAVAILABLE
This message is displayed when attempting to activate the Lane Departure Warning (LDW) system when it is temporarily unavailable.
The LDW system does not need service. This message could be due to the camera being blocked. Cleaning the outside of the windshield behind the rearview mirror may correct the issue.
LANE-KEEPING ASSIST UNAVAILABLE
This message displays when the Lane Keeping Assist (LKA) and Lane Departure Warning (LDW) systems is temporarily unavailable.
The LKA system does not need service.
This message could be due to the camera being blocked. Clean the outside of the windshield behind the rearview mirror.
REAR AUTO BRAKE/PARK ASSIST OFF
This message is displayed when the Parking Assist system has been turned off or when there is a temporary condition causing the system to be disabled.
REAR AUTO BRAKE AND PARK ASSIST UNAVAILABLE
This message is displayed when attempting to activate the parking and backing features of the Driver Assistance System when they are temporarily unavailable. The system does not need service.
This can occur under the following conditions:
- The radar is not clean. Keep the radar sensors free of mud, dirt, snow, ice, and slush. Clean the entire front and/or rear of the vehicle.
- Heavy rain or snow is interfering with the radar object detection or camera performance.
SERVICE AUTOMATIC COLLISION PREP
If this message displays, take the vehicle to your dealer to repair the system. Adaptive Cruise Control (ACC), Forward Collision Alert (FCA), and/or the Front Automatic Braking (FAB) System may not work. Do not use these systems until the vehicle has been repaired.
SERVICE DRIVER ASSIST SYSTEM
If this message displays, take the vehicle to your dealer to repair the system.
Adaptive Cruise Control (ACC), Forward Collision Alert (FCA), Front Automatic Braking (FAB) System, Assistance Systems for Parking or Backing, and/or Lane Departure Warning (LDW) system may not work. Do not use these systems until the vehicle has been repaired.
SERVICE FRONT CAMERA
If this message remains on after continued driving, take the vehicle
to your dealer for service. Do not use the Lane Keeping Assist (LKA),
Lane Departure Warning (LDW), and Forward Collision Alert (FCA) features.
SERVICE PARK ASSIST
This message displays if there is a problem with the Parking Assist system. Do not use this system to help you park. See your dealer for service.
SERVICE REAR AUTO BRAKE AND PARK ASSIST
This message displays if there is a problem with the parking and backing features of the Driver Assistance System. Do not use this system to help park or back the vehicle. See your dealer for service.
SIDE BLIND ZONE ALERT OFF
This message indicates that the driver has turned the Side Blind Zone Alert (SBZA) system off.
SERVICE SIDE DETECTION SYSTEM
If this message remains on after continued driving, the vehicle needs service. Side Blind Zone Alert (SBZA) and Rear Cross Traffic Alert (RCTA) features will not work. Take the vehicle to your dealer.
SIDE DETECTION SYSTEM UNAVAILABLE
This message indicates that Side Blind Zone Alert (SBZA) and Rear Cross Traffic Alerts (RCTA) are disabled either because the sensor is blocked and cannot detect vehicles in the blind zone, or the the vehicle is passing through an open area, such as the desert, where there is insufficient data for operation. This message may also activate during heavy rain or due to road spray. The vehicle does not need service.
TAKE STEERING
If LKA does not detect active driver steering, an alert and chime may be provided. Move the steering wheel to dismiss.
Ride Control System Messages
SERVICE ALL-WHEEL DRIVE
This message is displayed when there is a problem with the Wheel Drive (AWD) system. This message could be set by several issues. Some may require the service of the AWD system some will not. The vehicle will run in normal two-wheel drive mode when this message has been set. This could be caused by:
- A vehicle or an AWD system electronics problem.
- Various vehicle electrical issues.
- Worn-out or overheated clutch plates.
- Loss of fluids.
If this message appears, stop when convenient and turn off the ignition for 30 seconds. Restart the vehicle and check for the message on the DIC display. If the message has gone off and stays off, it is not necessary to take your vehicle to the dealer. If the message still displays or appears again when you begin driving, the system needs service. See your dealer.
SERVICE LEVELING SYSTEM
This message displays when there is a problem with the automatic rear level control. See Automatic Level Control. Have the vehicle serviced by your dealer
SERVICE STABILITRAK
This message displays if there is a problem with the StabiliTrak system.
SERVICE SUSPENSION SYSTEM
This message displays if there is a problem with the Selective Ride Control.
SERVICE TRACTION CONTROL
This message is displayed when there is a problem with the Traction Control System (TCS).
TRACTION CONTROL OFF
This message is displayed when the Traction Control System (TCS) has been turned off.
TRACTION CONTROL ON
This message is displayed when the Traction Control System (TCS) has been turned on.
Airbag System Messages
SERVICE AIRBAG
This message displays if there is a problem with the airbag system. See your dealer for service.
Security Messages
THEFT ATTEMPTED
This message displays if the vehicle detects a tamper condition. Service Vehicle Messages
Service Vehicle Messages
SERVICE POWER STEERING
This message displays and a chime may sound when there may be a
problem with the power steering system. If this message displays and a reduction in steering performance or loss of power steering assistance is noticed, see your dealer.
SERVICE VEHICLE SOON
This message is displayed if there is a problem with the vehicle. Take the vehicle to your dealer for service.
Starting the Vehicle Messages
PRESS THE BRAKE TO START
This message is displayed when attempting to start the vehicle without first pressing the brake pedal.
SERVICE KEYLESS START SYSTEM
This message is displayed if there is a problem with the pushbutton start system. Take the vehicle to your dealer for service.
Tire Messages
SERVICE TIRE MONITOR SYSTEM
This message displays if there is a problem with the Tire Pressure Monitor System (TPMS).
TIRE LEARNING ACTIVE
This message displays when the system is learning new tires. See
TIRE PRESSURE LOW ADD AIR TO TIRE
This message displays when the pressure in one or more of the tires is low.
This message also displays LEFT FRONT, RIGHT FRONT, LEFT REAR, or RIGHT REAR to indicate the location of the low tire.
The low tire pressure warning light will also come on.
If a tire pressure message appears on the DIC, stop as soon as possible. Inflate the tires by adding air until the tire pressure is equal to the values shown on the Tire and Loading Information label. See Tires
Vehicle Load Limits and Tire Pressure More than one tire pressure
message can appear at a time. The DIC also shows the tire pressure values.
Transmission Messages
SERVICE TRANSMISSION
This message displays if there is a problem with the transmission. See your dealer.
SHIFT DENIED
This message displays when using the Driver Shift Control (DSC) and attempting to shift to a gear not appropriate for the vehicle speed and engine revolutions per minute (rpm). See Manual Mode 0 201.
SHIFT TO PARK
This message displays when the transmission needs to be shifted to P (Park). This may appear when turning the ignition off if the vehicle is not in P (Park).
TRANSMISSION HOT — IDLE ENGINE
This message displays and a chime sounds if the transmission fluid in the vehicle gets hot. Driving with the transmission fluid temperature high can cause damage to the vehicle.
Stop the vehicle and let it idle to allow the transmission to cool. This message clears when the fluid temperature reaches a safe level.
Vehicle Reminder Messages
ICE POSSIBLE DRIVE WITH CARE
This message displays when ice conditions are possible.
Vehicle Speed Messages
SPEED LIMIT EXCEEDED
This message is displayed when the vehicle speed is greater than the set speed. See “Speed Warning” under Driver Information Center (DIC).
Washer Fluid Messages
WASHER FLUID LOW ADD FLUID
This message may display when the washer fluid level is low. Fill the windshield washer reservoir as soon as possible. See Engine
Compartment Overview 0 270 for the location of the windshield
washer reservoir. Also, see Washer Fluid .
Window Messages
OPEN, THEN CLOSE DRIVER/ PASSENGER WINDOW
This message is displayed when the window needs to be reprogrammed.
If the vehicle’s battery has been recharged or disconnected, you will need to program each front window for the express-up feature to work.
Vehicle Personalization
Use the audio system controls to access the personalization menus for customizing vehicle features.
The following are all possible personalization features. Depending on the vehicle, some may not be available.
Infotainment System Audio System Controls
To access the personalization menu:
- Press SETTINGS on the Home page on the infotainment
system display. - Press the desired feature to display a list of available options.
- Press to select the desired feature setting.
- Press theBack screen button to return to the previous menu.
Personalization Menus
The following list of menu items may be available:
- Time and Date
- Driving Mode
- Language (Language)
- Valet Mode
- Radio
- Vehicle
- Bluetooth
- Apple CarPlay
- Android Auto
- Voice
- Display
- Return to Factory Settings
- Software Information
Each menu is detailed in the following information.
Time and Date
Manually set the time and date.
Language (Language)
Select Language, then select from the available language(s).
Valet Mode
This will lock the infotainment system and steering wheel controls. It may also limit access to vehicle storage locations.
To enable valet mode:
- Enter a four-digit code on the keypad.
- Select Enter to go to the confirmation screen.
- Re-enter the four-digit code.
Press LOCK or UNLOCK to lock or unlock the system. Press Back to go back to the previous menu.
Radio
Press to display the Radio menu and the following may display:
- Manage Favorites
- Number of Favorites Shown
- Bose Audio Pilot
- Maximum Start-up Volume
Manage Favorites
This allows favorites to be edited. See “Manage Favorites” in
“Settings” under “Radio” in the infotainment manual
Number of Favorites Shown
Press to set the number of favorites to display.
Select the desired number or select Auto and the infotainment system will automatically adjust the number of favorites shown.
Audible Touch Feedback
This allows Audible Touch Feedback is to be turned on or off.
Select Off or On.
Bose Audio Pilot
This feature adjusts the volume based on the noise in the vehicle. See “Bose AudioPilot Noise Compensation Technology” under “Infotainment System Settings” in the infotainment manual.
Select Off or On.
Maximum Startup Volume
This feature sets the maximum startup volume. If the vehicle is started and the volume is greater than this level, the volume is adjusted to this level. To set the maximum startup volume, press + or − to increase or decrease.
Vehicle
Select and the following may display:
- Climate and Air Quality
- Collision/Detection Systems
- Comfort and Convenience
- Lighting
- Power Door Locks
- Remote Lock, Unlock, Start
Climate and Air Quality
Select the following May display:
- Auto Fan Max Speed
- Air Quality Sensor
- Auto Heated Seats
- Auto Defog
- Auto Rear Defog
Auto Fan Max Speed
This feature will set the maximum auto fan speed.
Select Low, Medium, or High.
Air Quality Sensor
This allows for the selection of air quality sensor operation at high or low sensitivity.
Select Off, Low Sensitivity, or High Sensitivity.
Auto Heated Seats
When enabled, this feature will automatically activate the heated seats at the level required by the interior temperature. The auto-heated seats can be turned off by using the heated seat buttons on the centre stack.
Select Off or On.
Auto Defog
When set to On, the front defog will automatically react to temperature and humidity conditions that may cause fogging.
Select Off or On.
Auto Rear Defog
If equipped, this feature will
automatically turn on the rear defog.
Select Off or On.
Collision/Detection Systems
Select the Collision/Detection The systems menu and the following may display:
- Alert Type
- Auto Collision Preparation
- Go Notifier
- Park Assist
- Lane Change Alert
- Rear Cross Traffic Alert
Alert Type
This feature will set crash alerts to beeps or seat vibrations. This setting affects all crash alerts including Forward Collision Alert,
Lane Departure Warning, and Park Assist alerts.
Select Beeps or Safety Alert Seat.
Auto Collision Preparation
This feature will turn on or off the Forward Collision Alert (FCA) and Front Automatic Braking (FAB). The Off-setting disables all FCA and FAB functions. With the Alert and Brake settings, both FCA and FAB are available. The Alert setting disables FAB, but some last-second automatic braking capability is still provided, though less likely to occur.
Select Off, Alert and Brake, or Alert.
Go Notifier
This feature will give a reminder from Adaptive Cruise Control when it has brought the vehicle to a complete stop behind another stopping vehicle, and then that vehicle drives on.
Select Off or On.
Rear Cross Traffic Alert
This allows the Rear cross-traffic Alert feature to be turned on or off.
Select Off or On.
Comfort and Convenience
Select the Comfort and Convenience menu and the following may be displayed:
- Auto Memory Recall
- Easy Exit Options
- Chime Volume
- Reverse Tilt Mirror
- Auto Mirror Folding
- Rain Sense Wipers
Auto Memory Recall
This feature automatically recalls the current driver’s previously stored 1 or 2 button positions when entering the vehicle.
Select Off or On.
Easy Exit Options
This allows the feature to be turned on or off. See Memory Seats.
Select On or Off. Select Off or On.
Chime Volume
This allows the selection of the chime volume level.
Press + or − to adjust the volume.
Reverse Tilt Mirror
When on, the driver and/or passenger mirrors will tilt downward when the vehicle is shifted to R (Reverse) to improve visibility of the ground near the rear wheels.
Select Off, On – Driver and Passenger, On – Driver, or On -Passenger.
Auto Mirror Folding
When on, the outside rearview mirrors will automatically fold or unfold when the Remote Keyless Entry (RKE) transmitter
button is pressed and held.
Select Off or On.
Auto Wipe in Reverse Gear
When the front wiper is on, the rear wiper will automatically activate when the vehicle is shifted to R (Reverse).
Select Off or On.
Lighting
Select and the following may display:
- Vehicle Locator Lights
- Exit Lighting
Vehicle Locator Lights
This feature will flash the exterior lamps and allow some of the exterior lamps and most of the interior lamps to turn on briefly when
on the Remote Keyless Entry (RKE) the transmitter is pressed to locate the vehicle.
Select Off or On.
Exit Lighting
This allows the selection of how long the exterior lamps stay on when leaving the vehicle when it is dark outside.
Select Off, 30 Seconds, 60 Seconds, or 120 Seconds.
Power Door Locks
Select and the following may display:
- Unlocked Door Anti-Lockout
- Auto Door Unlock
- Delayed Door Lock
Unlocked Door Anti-Lockout
When on, this feature will keep the driver door from locking when the door is open. If Off is selected, the A delayed Door Lock menu will be available.
Select Off or On.
Auto Door Unlock
This allows the selection of which of the doors will automatically unlock when the vehicle is shifted into P (Park).
Select Off, All Doors, or Driver Door.
Delayed Door Lock
When on, this feature will delay the locking of the doors. To override the delay, press the power door lock switch on the door.
Select Off or On.
Remote Lock, Unlock, Start
Select and the following may display:
- Remote Unlock Light Feedback
- Remote Lock Feedback
- Remote Door Unlock
- Remote Start Auto Cool Seats
- Remote Start Auto Heat Seats
- Remote Window Operation
- Passive Door Unlock
- Passive Door Lock
- Remote Left in Vehicle Alert
Remote Unlock Light Feedback
When on, the exterior lamps will flash when unlocking the vehicle with the RKE transmitter.
Select Off or Flash Lights.
Remote Lock Feedback
This allows the selection of what type of feedback is given when locking the vehicle with the RKE transmitter.
Select Off, Lights and Horn, Lights Only, or Horn Only.
Remote Start Auto Cool Seats
If equipped and turned on, this feature will turn on the ventilated seats when using remote start on warm days.
Select Off or On.
Remote Start Auto Heat Seats
If equipped and turned on, this feature will turn on the heated seats when using remote start on cold days.
Select Off or On.
Remote Window Operation
If equipped, this feature enables the remote operation of all windows from the RKE transmitter. See “Window Operation from Outside
the Vehicle” in Power Windows.
Passive Door Unlock
This allows the selection of what doors will unlock when using the button on the driver’s door to unlock the vehicle.
Select All Doors or Driver Door.
Passive Door Lock
This allows passive locking to be turned on or off and selects feedback. Select Off, On with Horn Chirp, or On.
Remote Left in Vehicle Alert
This feature sounds an alert when the RKE transmitter is left in the vehicle.
Select Off or On.
Bluetooth
Select and the following may display:
- Pair New Device
- Device Management
- Ringtones
- Voice Mail Numbers
Pair New Device
Select to pair a new device. See “Pairing” in “Infotainment Controls” under “Bluetooth” in the infotainment manual.
Device Management
Select to connect to a different phone source, disconnect a phone, or delete a phone.
Ringtones
Press to change the ringtone for the specific phone. The phone does not need to be connected to change the ringtone.
Voice Mail Numbers
This feature displays the voicemail number for all connected phones. To change the voicemail number, select EDIT or press the EDIT button. Type a new number, then select SAVE or press the SAVE button.
Apple CarPlay™
Select and the following may display:
- Apple CarPlay
- Manage Apple CarPlay Devices
Apple CarPlay
This feature allows Apple devices to be connected to the infotainment system through a USB port.
Select Off or On.
Manage Apple CarPlay Devices
Select to manage Apple devices. Apple CarPlay must be on for this feature to be accessed.
Android Auto
Select the following May display:
- Android Auto
- Manage Android Auto Devices
Android Auto
This feature allows Android devices to be connected to the infotainment system through a USB port.
Select Off or On.
Voice
Select the following May display:
- Confidence Threshold
- Prompt Length
- Audio Feedback Speed
Confidence Threshold
This feature allows the adjustment of the sensitivity of the speech recognition system.
Select Confirm More or Confirm Less.
Prompt Length
This feature adjusts the voice prompt length.
Select Short or Long.
Audio Feedback Speed
This feature adjusts the audio feedback speed.
Select Slow, Medium, or Fast.
Display
Select and the following may display:
- Mode
- Calibrate Touchscreen
- Turn Display Off
Mode
Select to change the display screen for day or night driving.
Select Auto, Day, or Night.
Proximity Sensing
Select to change the display screen for day or night driving.
Select Auto, Day, or Night.
Calibrate Touchscreen
Select to calibrate the touchscreen, then follow the prompts.
Turn Display Off
Select to turn the display off. Press anywhere on the display area or any faceplate button to turn the display on.
Rear Camera
This allows for Rear Parking Assist Symbols and Guidance Lines to be
turned off or on.
Select Off or On for the desired features
Return to Factory Settings
Select and the following may display:
- Restore Vehicle Settings
- Clear All Private Data
- Restore Radio Settings
Restore Vehicle Settings
This allows the selection of restoring vehicle settings.
Select Restore or Cancel.
Clear All Private Data
This allows the selection to clear all private information from the vehicle.
Select Delete or Cancel.
Restore Radio Settings
This allows selection to restore radio settings.
Select Restore or Cancel.
Software Information
Select to view the infotainment system’s current software information.
FAQs
All you have to do is touch the climate icon on the Cadillac XTS’s Display Screen to personalize your climate control. From there, you can easily adjust the fan speed, temperature, and ventilation settings.
Of course! With a simple Bluetooth pairing, you can enjoy hands-free calling, music streaming, and access to a variety of mobile apps on your 2016 Cadillac XTS Display Screen.
With the Display Screen, creating and modifying driver profiles is a breeze. To customize your settings, including seat position and mirror adjustments, navigate to the settings menu, select “Driver Profiles,” and then follow the on-screen instructions.
It’s easy to use the navigation system. For a smooth and guided ride, tap the navigation icon on the Display Screen of your 2016 Cadillac XTS. Then, enter your destination using the on-screen keyboard or voice commands.
You have easy access to audio settings management with the Display Screen. Go to the audio menu in the 2016 Cadillac XTS to change the sound tones, select sources, and adjust the loudness.
It’s easy to activate the parking assistance features. For a stress-free parking experience in the 2016 Cadillac XTS, access the parking assist menu on the Display Screen, select your preferred mode, and adhere to the on-screen instructions.
Yes, you can! The Display Screen allows you to customize the ambient lighting settings. Explore the lighting menu to create the ideal ambiance inside the 2016 Cadillac XTS by choosing your favorite color and level of intensity.
It’s easy to handle many Bluetooth devices. To seamlessly connect and manage multiple devices in the 2016 Cadillac XTS, access the Bluetooth menu on the Display Screen, select “Pair Device,” and then follow the on-screen instructions.
Certainly! Go to the vehicle information menu on the Display Screen to view current information about your 2016 Cadillac XTS’s tire pressure, fuel efficiency, and other important metrics.
It’s simple to customize the display preferences. To customize the visual experience to your liking, just access the display settings on your 2016 Cadillac XTS’s Display Screen. From there, you can change the brightness and themes.
The 2016 Cadillac XTS has a flexible voice command system. To control various functions through the Display Screen, just speak commands like “Call [contact name],” “Navigate to [destination],” or “Play [song/artist]” after pressing the voice command button on the steering wheel.
Yes, you can! To ensure a smooth and connected ride in the 2016 Cadillac XTS, make use of the smartphone integration features on the Display Screen to access and manage compatible apps from your smartphone.
Updating your Display Screen is necessary for best performance. For hassle free software updates in the 2016 Cadillac XTS, check the settings menu on the display screen.
Numerous safety features are accessible and configurable via the Display Screen. To personalize features like forward collision alert, lane departure warning, and other features in the 2016 Cadillac XTS, navigate to the safety settings menu.
There is a voice command system for controlling the temperature. To operate the 2016 Cadillac XTS hands-free, just speak commands like “Set temperature to [desired temperature]” or “Turn on/off air conditioning” into the voice command button mounted on the steering wheel.
Useful Links
View Full PDF: 2016 Cadillac XTS Owner’s Manual| Auto User Guide
2023 cadillac xt6 Specs, Price, Features, Mileage and Review