Display Screen Guide: 2017 Cadillac ATS Display Features
The 2017 Cadillac ATS welcomes you to a futuristic driving experience where opulent design and state-of-the-art technology coexist harmoniously. This car’s cutting-edge display screen, a technological marvel that takes driving to new heights, is the focal point of this engineering marvel. As the command center, this high-resolution screen smoothly integrates with the car’s cutting-edge technologies to deliver a fun and easy-to-use driving experience. The Cadillac ATS’s display screen enthralls with its svelte form and colorful interface as soon as you step inside, providing you with a visual symphony of entertainment and information. With so many features, the display screen is more than just an accessory; it’s a doorway to a world where style and innovation coexist. Features include infotainment, navigation, and sophisticated driver assistance systems. Drive with assurance knowing that the 2017 Cadillac ATS display screen transforms into your own personal cockpit, reinventing the way you connect with your car and guaranteeing that every ride is a tasteful fusion of sophistication and performance.
2023 Cadillac XT5 Specs, Price, Features, Mileage (Brochure)
Information Displays
Driver Information Center (DIC)
The DIC displays are shown in the left and right interactive display zones on the instrument cluster. The displays show the status of many vehicle systems. The controls for the DIC are on the right steering wheel control.
Press to move up or down in a list.
Press to move between the interactive display zones in the cluster. Press
to go back to the previous menu.
SEL: Press to open a menu or select a menu item. Press and hold to reset values on certain screens.
DIC Information Display Options
The info displayed on the DIC can be turned on or off through the Settings menu.
- Press SEL while viewing the Settings page in one of the interactive display zones on the cluster.
- Scroll to Info Pages and press SEL.
- Pressto move through the list of possible info displays
- Press SEL while an item is highlighted to select or deselect that item. When an item is selected, a checkmark will appear next to it.
DIC Information Displays
The following is the list of all possible DIC information displays. Some of the information displays may not be available for your particular vehicle.
Speed: Shows the vehicle speed in either kilometers per hour (km/h) or miles per hour (mph).
Trip 1 and Trip 2: Shows the current distance traveled, in either kilometer (km) or miles (mi), since the trip odometer was last reset. The trip odometer can be reset by pressing and holding SEL while this display is active.
Fuel Range: This shows the approximate distance the vehicle can be driven without refueling. LOW will be displayed when the vehicle is low on fuel. The fuel range estimate is based on an average of the vehicle’s fuel economy over recent driving history and the amount of fuel remaining in the fuel tank.
Average Fuel Economy: Shows the approximate average liters per 100 kilometers (L/100 km) or miles per gallon (mpg). This number is calculated based on the number of L/100 km (mpg) recorded since the last time this menu item was reset. This number reflects only the approximate average fuel economy that the vehicle has right now and will change as driving conditions change. The Average Fuel Economy can be reset by pressing and holding SEL while this display is active.
Instantaneous Fuel Economy: Shows the current fuel economy in either liters per 100 kilometers (L/100 km) or miles per gallon (mpg). This number reflects only the approximate fuel economy that the vehicle has right now and changes frequently as driving conditions change.
Average Speed: This shows the average speed of the vehicle in kilometers per hour (km/h) or miles per hour (mph). This average is calculated based on the various vehicle speeds recorded since the last reset of this value. The average speed can be reset by pressing and holding SEL while this display is active.
Timer: This display can be used as a timer. To start the timer, press SEL while this display is active. The display will show the amount of time that has passed since the timer was last reset. To stop the timer, press SEL briefly while this display is active and the timer is running. To reset the timer to zero, press and hold SEL while this display is active.
Compass: Shows the direction the vehicle is driving.
Turn Arrow: Shows the next maneuver when using route guidance.
Travel Time: This shows the estimated time duration remaining for the current route.
Estimated Time to Arrival: This shows the approximate time of arrival to your destination when using route guidance.
Speed Limit: Shows the current speed limit on vehicles with the navigation system. The information for this page comes from a roadway database.
Speed Warning: Allows the driver to set a speed that they do not want to exceed. To set the Speed Warning, press SEL when the Speed Warning is displayed. Press
to adjust the value. This feature can be turned off by pressing and holding SEL while viewing this page. If the selected speed limit is exceeded, a pop-up warning is displayed and a chime may sound.
Cruise Set Speed: This shows the speed the cruise control or Adaptive Cruise Control (ACC, if equipped) is set to.
Follow Distance/Gap Setting: When Adaptive Cruise Control (ACC) is not engaged, the current follow time to the vehicle ahead is displayed as a time value on this page. When ACC has been engaged, the display switches to the gap setting page. This page shows the current gap setting along with the vehicle ahead telltale.
Battery Voltage: Shows the current battery voltage.
Oil Life: Shows an estimate of the oil’s remaining useful life. If REMAINING OIL LIFE 99% is displayed, that means 99% of the current oil life remains.
When the remaining oil life is low, the CHANGE ENGINE OIL SOON message will appear on the display. The oil should be changed as soon as possible. See Engine Oil 0 259. In addition to the engine oil life system monitoring the oil life, additional maintenance is recommended.
The Oil Life display must be reset after each oil change. It will not reset itself. Do not reset the Oil Life display accidentally at any time other than when the oil has just been changed. It cannot be reset accurately until the next oil change. To reset the engine oil life system, press and hold SEL for several seconds while the Oil Life display is active.
Tire Pressure: Shows the approximate pressures of all four tires. Tire pressure is displayed in either kilopascal (kPa) or pounds per square inch (psi). If the pressure is low, the value for that tire is shown in amber.
Tire Temperature: Displays a description of the tire air temperature based on the readings from the TPMS sensors. The temperature range displayed will change based on ambient conditions and driving style.
Engine Boost (LTG and LF4 Engines): Displays engine manifold pressure relative to ambient air pressure. It will display the boost pressure generated by the turbocharging system.
Vehicle Odometer: Shows the odometer.
Blank Page: The Blank Page display allows for no information to be displayed in the DIC display zone(s).
Head-Up Display (HUD)
Warning
If the HUD image is too bright or too high in your field of view, it may take you more time to see things you need to see when it is dark outside. Be sure to keep the HUD image dim and placed low in your field of view.
If equipped with HUD, some information concerning the operation of the vehicle is projected onto the windshield. The information is projected through the HUD lens on the driver’s side of the instrument panel and focused out toward the front of the vehicle.
Caution
If you try to use the HUD image as a parking aid, you may misjudge the distance and damage your vehicle. Do not use the HUD image as a parking aid.
The HUD information can be displayed in various languages. The speedometer reading and other numerical values can be displayed in either English or metric units.
The language selection is changed through the radio and the units of measurement are changed through the instrument cluster.
HUD Display on the Vehicle Windshield
The HUD may display some of the following vehicle information and vehicle messages or alerts:
- Speed
- Speed Limit
- Vehicle Ahead
- Tachometer
- Audio
- Phone
- Navigation
- Collision Alert
- Cruise Control Set Speed
- Adaptive Cruise Control
- Lane Departure/Lane Keep Assist
- Low Fuel
- Transmission Gear
- Shift Lights (ATS-V only)
Some vehicle messages or alerts displayed in the HUD may be cleared by using the steering wheel controls.
The HUD control is to the left of the steering wheel. To adjust the HUD image:
- Adjust the driver seat to a comfortable position.
- Start the engine.
- Use the following settings to adjust the HUD.
Press down or lift to center the HUD image. The HUD image can only be adjusted up and down, not side to side.
Press to select the display view. Each press will change the display view.
Lift and hold to brighten the display. Press down and hold to dim the display. Hold down to turn the display off.
The HUD image will automatically dim and brighten to compensate for outside lighting. The HUD brightness control can also be adjusted as needed.
The HUD image can temporarily light up depending on the angle and position of sunlight on the HUD display. This is normal.
Polarized sunglasses could make the HUD image harder to see.
Head-Up Display (HUD) Rotation Option
This feature allows for adjusting the angle of the HUD image.
Press SEL on the steering wheel controls while Head-up Display Rotation is highlighted to enter Adjust Mode. Press angle of the HUD display. Press
to highlight OK, then press SEL to save the setting. CANCEL can also be selected to cancel the setting. The vehicle must be in P (Park).
HUD Views
There are four views in the HUD. Some vehicle information and vehicle messages or alerts may be displayed in any view. to adjust the
Speed View: This display gives the speedometer reading (in English or metric units), Adaptive Cruise Control, Set Speed, Speed Limit, Forward Collision Alert, Lane Departure Warning/ Lane Keep Assist, and Vehicle Ahead indicator. Some information only appears on vehicles that have these features, and when they are active.
Audio/Phone View: This display includes the information in the speed view along with audio/phone information. The current radio station, media type, and incoming calls will be displayed.
All HUD views may briefly display audio information when the driver uses the steering wheel controls to adjust the audio settings appearing in the instrument cluster.
Incoming phone calls appearing in the instrument cluster may also be displayed in any HUD view.
Navigation View: This display includes the information in speed view along with Turn-by-Turn Navigation information. When navigation routing is not active, “Compass Information Is Displayed”.
Navigation Turn-by-Turn Alerts shown in the instrument cluster may also be displayed in any HUD view.
Performance View: This display gives the speedometer reading, rpm reading, transmission positions, Shift Timing Light Position (ATS-V only), and gear shift indicator (if equipped). The radio, CD, navigation, and phone information do not appear in the Performance view.
The shift timing lights at the top of the display will appear with increases in engine rpm. The rows of lights get closer together as the shift point gets closer. Shift the transmission before the lights come together in the display. Shift immediately if the lights are flashing.
Care of the HUD
Clean the inside of the windshield to remove any dirt or film that could reduce the sharpness or clarity of the HUD image.
Clean the HUD lens with a soft cloth sprayed with glass cleaner. Wipe the lens gently, then dry it.
HUD Troubleshooting
Check that:
- Nothing is covering the HUD lens.
- The HUD brightness setting is not too dim or too bright.
- The HUD is adjusted to the proper height.
- Polarized sunglasses are not worn.
- The windshield and HUD lens are clean.
If the HUD image is not correct, contact your dealer. The windshield is part of the HUD system. If windshield replacement is required.
Vehicle Messages
Messages displayed on the DIC indicate the status of the vehicle or some action that may be needed to correct a condition. Multiple messages may display one after the other.
The messages that do not require immediate action can be acknowledged and cleared by pressing SEL. The messages that require immediate action cannot be cleared until that action is performed. All messages should be taken seriously and clearing the messages does not correct the problem.
The following are some of the vehicle messages that may be displayed depending on the vehicle content.
Battery Voltage and Charging Messages
BATTERY SAVER ACTIVE
This message displays when the vehicle has detected that the battery voltage is dropping beyond a reasonable point. The battery-saver system starts reducing features of the vehicle that may be noticed. At the point that features are disabled, this message displays. Turn off
unnecessary accessories to allow the battery to recharge.
LOW BATTERY
This message is displayed when the battery voltage is low. See Battery –
North America.
SERVICE BATTERY CHARGING SYSTEM
This message is displayed when there is a fault in the battery charging system. Take the vehicle to your dealer for service.
TRANSPORT MODE ON
This message is displayed when the vehicle is in transport mode. Some
features can be disabled while in this mode, including Remote Keyless Entry (RKE), remote start, and the vehicle alarm system. Take the vehicle to your dealer for service to turn the transport mode off.
Brake System Messages
BRAKE FLUID LOW
This message is displayed when the brake fluid level is low.
STEP ON THE BRAKE TO RELEASE PARK THE BRAKE
This message is displayed if you attempt to release the Electric Parking Brake without the brake pedal applied.
See Parking Brake (Electric) or Parking Brake (Manual)
RELEASE PARKING BRAKE
This message is displayed if the Electric Parking Brake is on while the vehicle is in motion. See Parking Brake (Electric) or Parking Brake (Manual)
SERVICE BRAKE ASSIST
This message may be displayed when there is a problem with the brake boost assist system. When this message is displayed, the brake boost assist motor might be heard operating and you might notice pulsation in the
brake pedal. This is normal under these conditions. Take the vehicle to your dealer for service.
SERVICE PARKING BRAKE
This message is displayed when there is a problem with the parking brake.
Take the vehicle to your dealer for service.
Compass Messages
Dashes may be displayed if the vehicle temporarily loses communication with the Global Positioning System (GPS).
Cruise Control Messages
ADAPTIVE CRUISE SET TO XXX
This message displays when the Adaptive Cruise Control (ACC) speed is set.
ADAPTIVE CRUISE TEMPORARILY
UNAVAILABLE
This message displays when attempting to activate Adaptive Cruise
Control (ACC) when it is temporarily unavailable. The ACC system does not need service.
This can occur under the following conditions:
- The radar is not clean. Keep the radar sensors free of mud, dirt, snow, ice, and slush. Clean the entire front and/or rear of the vehicle.
- Heavy rain or snow is interfering with the radar object detection or camera performance.
CRUISE SET TO XXX
This message displays when the cruise control speed is set.
NO CRUISE BRAKING GAS PEDAL APPLIED
This message displays when Adaptive Cruise Control (ACC) is active and the driver is pressing the gas pedal. When this occurs, ACC will not brake.
SERVICE ADAPTIVE CRUISE CONTROL
This message displays when the Adaptive Cruise Control (ACC) needs service. Take the vehicle to your dealer.
SHIFT TO PARK BEFORE EXITING
This message may display if Adaptive Cruise Control (ACC) is engaged holding the vehicle at a stop, and the driver attempts to exit the vehicle. Put the vehicle in P (Park) before exiting.
Door Ajar Messages
DOOR OPEN
A door open symbol will be displayed on the DIC showing which door is open. If the vehicle has been shifted out of P (Park), a DOOR OPEN message will also be displayed. The DOOR OPEN message may also be displayed if the vehicle starts to move. Close the door completely.
HOOD OPEN
This message will display along with a hood open symbol when the hood is open. A chime may also sound. Close the hood completely.
TRUNK OPEN
This message will display along with a symbol when the trunk is open. Close the trunk completely.
Engine Cooling System Messages
A/C OFF ENGINE COOLANT HOT
This message displays when the engine coolant becomes hotter than the normal operating temperature. To avoid added strain on a hot engine, the air conditioning compressor automatically turns off. When the coolant temperature returns to normal, the air conditioning compressor turns back on. The vehicle can continue to be driven.
If this message continues to appear, have the system repaired by your dealer as soon as possible to avoid damage to the engine.
ENGINE OVERHEATED — IDLE ENGINE:
This message displays and a chime sounds when the engine coolant temperature is too hot. The engine coolant temperature warning light will also be on. Stop and allow the vehicle to idle until it cools down.
ENGINE OVERHEATED — TURN VEHICLE OFF
This message displays and a continuous chime sounds if the
engine cooling system reaches unsafe temperatures for operation. The engine coolant temperature warning light will flash. Stop and turn off the vehicle as soon as it is safe to do so to avoid severe damage. This message clears when the engine has cooled to a safe operating temperature.
Engine Oil Messages
CHANGE ENGINE OIL SOON
This message displays when the engine oil needs to be changed. When
you change the engine oil, be sure to reset the oil life system. See Engine Oil Life System Driver Information Center (DIC) Engine Oil Maintenance Schedule.
ENGINE OIL HOT, IDLE ENGINE
This message displays when the engine oil temperature is too hot. Stop and allow the vehicle to idle until it cools down.
ENGINE OIL LOW — ADD OIL
On some vehicles, this message displays when the engine oil level may
be too low. Check the oil level before filling to the recommended level.
If the oil is not low and this message remains on, take the vehicle to your dealer for service.
OIL PRESSURE LOW — STOP ENGINE
This message displays if low oil pressure levels occur. Stop the vehicle as soon as safely possible and do not operate it until the cause of the low oil pressure has been corrected. Check the oil as soon as possible and have the vehicle serviced by your dealer.
Engine Power Messages
ENGINE POWER IS REDUCED
This message displays when the vehicle’s engine power is reduced. Reduced engine power can affect the vehicle’s ability to accelerate. If this message is on, but there is no reduction in performance, proceed to your destination. The performance may be reduced the next time the vehicle is driven. The vehicle may be driven at a reduced speed while this message is on, but maximum acceleration and speed may be reduced. Anytime this message stays on, or displays repeatedly, the vehicle should be taken to your dealer for service as soon as possible.
Fuel System Messages
FUEL LEVEL LOW
This message displays when the vehicle is low on fuel. Refuel as soon as possible.
TIGHTEN GAS CAP
This message displays when the fuel cap is not on tight. Tighten the fuel cap.
Key and Lock Messages
NO REMOTE KEY WAS DETECTED PLACE KEY IN THE TRANSMITTER POCKET THEN START YOUR VEHICLE
This message displays when trying to start the vehicle if an RKE transmitter is not detected. The transmitter battery may be weak. See “Starting the Vehicle with a Low Transmitter Battery” under Remote Keyless Entry.
NO REMOTE DETECTED
This message displays when the transmitter battery may be weak. See
“Starting the Vehicle with a Low Transmitter Battery” under Remote Keyless Entry (RKE) System Operation.
NO REMOTE-DETECTED PRESS BRAKE TO RESTART
This message displays when attempting to turn off the vehicle and the RKE transmitter is no longer detected. Restarting is allowed
without the RKE transmitter for five minutes. Press the brake pedal
and ENGINE START/STOP to restart the vehicle.
NUMBER OF KEYS PROGRAMMED
This message displays when programming new keys to the vehicle.
REMOTE LEFT IN VEHICLE
This message displays when leaving the vehicle with the RKE transmitter still inside.
- REPLACE THE BATTERY IN THE REMOTE KEY
This message displays when the battery in the RKE transmitter needs to be replaced.
Lamp Messages
AFL (ADAPTIVE FORWARD LIGHTING) LAMPS NEED SERVICE
This message displays when the AFL system is disabled and needs service. See your dealer. See Adaptive Forward Lighting (AFL)
AUTOMATIC LIGHT CONTROL ON/OFF
This message is displayed when the exterior lamp control is in AUTO and the lights have turned on or off. See Automatic Headlamp System.
XXX TURN INDICATOR FAILURE
When one of the turn signals is out, this message displays to show which bulb needs to be replaced.
See Bulb Replacement and Replacement Bulbs
TURN SIGNAL ON
This message is displayed if the turn signal has been left on. Turn off the turn signal.
Object Detection System Messages 24 GHz RADARS OFF
This message displays when driving in certain areas where there may be radar interference. Adaptive Cruise Control (ACC), Forward Collision Alert (FCA), and Forward Automatic Braking (FAB) may not work or may not work as well. The vehicle does not need service.
FORWARD COLLISION SYSTEM OFF
This message displays when Forward Automatic Braking (FAB) has been turned off. See Forward Automatic Braking (FAB).
FORWARD COLLISION SYSTEM REDUCED
This message displays when Forward Automatic Braking (FAB) has been set to the Alert setting. This setting disables most FAB functions. See Forward Automatic Braking (FAB)
FORWARD COLLISION SYSTEM UNAVAILABLE
This message displays when Forward Automatic Braking (FAB) has been unavailable for some time. FAB does not need service. This message can display under the following conditions:
- The front of the vehicle or windshield is not clean. Keep these areas clean and free of mud, dirt, snow, ice, and slush. For cleaning instructions, see Exterior Care
- Heavy rain or snow is interfering with the object detection performance.
This message may also be displayed if there is a problem with the StabiliTrak system. See Traction Control/Electronic Stability Control.
FORWARD COLLISION ALERT OFF
This message displays when the Forward Collision Alert has been turned off.
FRONT CAMERA BLOCKED CLEAN WINDSHIELD
This message displays when the camera is blocked. Cleaning the outside of the windshield behind the rearview mirror may correct the issue. The Lane Keep Assist (LKA) and the Lane Departure Warning (LDW) system will not operate. Adaptive Cruise Control (ACC), Forward Collision Alert (FCA), and Forward Automatic Braking (FAB) may not work or may not work as well.
LANE CHANGE ALERT OFF
This message indicates that the driver has turned the Side Blind Zone Alert (SBZA) and Lane Change Alert (LCA) systems off.
LANE-KEEPING ASSIST UNAVAILABLE
This message displays when the Lane Keep Assist (LKA) and Lane Departure Warning (LDW) systems is temporarily unavailable. The LKA system does not need service.
This message could be due to the camera being blocked. Cleaning the outside of the windshield behind the rearview mirror may correct the issue.
REAR AUTO BRAKE/PARK ASSIST OFF
This message displays when the Parking Assist system has been turned off or when there is a temporary condition causing the system to be disabled.
REAR AUTO BRAKE AND PARK ASSIST UNAVAILABLE
This message displays when attempting to activate the parking and backing features of the Driver Assistance System when they are temporarily unavailable. The system does not need service.
This can occur under the following conditions:
- The radar is not clean. Keep the radar sensors free of mud, dirt, snow, ice, and slush. Clean the entire front and/or rear of the vehicle. For cleaning instructions, see Exterior Care.
- Heavy rain or snow is interfering with the radar object detection or camera performance. See Driver Assistance Systems.
SERVICE FORWARD COLLISION SYSTEM
If this message displays, take the vehicle to your dealer to repair the
system. Adaptive Cruise Control (ACC), Forward Collision Alert (FCA), and/or Forward Automatic Braking (FAB) may not work. Do not use these systems until the vehicle has been repaired.
SERVICE DRIVER ASSIST SYSTEM
If this message displays, take the vehicle to your dealer to repair the system.
Adaptive Cruise Control (ACC), Forward Collision Alert (FCA), Forward Automatic Braking (FAB), Assistance Systems for Parking or Backing, and/or the Lane Keep Assist (LKA) system may not work. Do not use these systems until the vehicle has been repaired.
SERVICE FRONT CAMERA
If this message remains on after continued driving, take the vehicle to your dealer for service. Do not use the Lane Keep Assist (LKA), Lane Departure Warning (LDW), and Forward Collision Alert (FCA) features.
SERVICE PARK ASSIST
This message displays if there is a problem with the Parking Assist
system. Do not use this system to help you park. See your dealer for service.
SERVICE REAR AUTO BRAKE AND PARK ASSIST
This message displays if there is a problem with the parking and backing features of the Driver Assistance System. Do not use this system to help park or back the vehicle. See your dealer for service.
SERVICE SIDE DETECTION SYSTEM
If this message remains on after continued driving, the vehicle needs service. Side Blind Zone Alert (SBZA), Lane Change Alert (LCA), and Rear Cross Traffic Alert (RCTA) features will not work. Take the vehicle to your dealer.
SIDE DETECTION SYSTEM UNAVAILABLE
This message indicates that Side Blind Zone Alert (SBZA), Lane Change Alert (LCA), and Rear Cross Traffic Alert (RCTA) are disabled either because the sensor is blocked and cannot detect vehicles in the blind zone, or the vehicle is passing through an open area, such as the desert, where there
is insufficient data for operation. This message may also activate during heavy rain or due to road spray. The vehicle does not need service. For cleaning, see “Washing the Vehicle” under Exterior Care .
TAKE STEERING
If LKA does not detect active driver steering, an alert and chime may be provided. Move the steering wheel to dismiss. See Lane Keep Assist (LKA) Ride Control System Messages
ALL-WHEEL DRIVE OFF
If the vehicle has the All-Wheel-Drive (AWD) system, this message displays when there is a temporary condition making the AWD system unavailable.
The vehicle will run in 2WD. This could be caused by:
- Loss of wheel or vehicle speed
- AWD system overheat
- Certain vehicle electrical conditions
This message turns off when the above conditions are no longer present and the warning message is reset.
PERFORMANCE TRACTION 1 – WET (V-Series Only)
This message displays when this Performance Traction Management (PTM) mode is selected. The TCS and StabiliTrak OFF cluster lights will also be on when this mode is selected.
Launch Control is available when this mode is selected. In this mode, the Traction Control and Active Handling System are available but intended for use on wet race track conditions.
Adjust your driving accordingly. See “Performance Traction Management (V-Series Only)” under Competitive Driving Mode (FE3 Only) .
PERFORMANCE TRACTION 2 – DRY (V-Series Only)
This message displays when this Performance Traction Management
(PTM) mode is selected. The TCS and StabiliTrak OFF cluster lights will also be on when this mode is selected. Launch Control is available when this mode is selected. In this mode, the Traction Control and Active Handling System are available but intended for use on dry race track conditions.
Adjust your driving accordingly. See “Performance Traction Management (V-Series Only)” under Competitive Driving Mode (FE3 Only)
PERFORMANCE TRACTION 3 – SPORT 1 (V-Series Only)
This message displays when this Performance Traction Management
(PTM) mode is selected. The TCS and StabiliTrak OFF cluster lights will also be on when this mode is selected.
Launch Control is available when this mode is selected. In this mode, the Traction Control and Active Handling System are available but intended for use on dry race track conditions.
Adjust your driving accordingly. See “Performance Traction Management (V-Series Only)” under Competitive Driving Mode (FE3 Only) .
PERFORMANCE TRACTION 4 – SPORT 2 (V-Series Only)
This message displays when this Performance Traction Management (PTM) mode is selected. The TCS and StabiliTrak OFF cluster lights will also be on when this mode is selected.
Launch Control is available when this mode is selected. In this mode, the Traction Control is available but intended for use on dry race track conditions. The Active Handling System is disabled when this mode is selected. This mode will require more driver skill than modes 1–3. Adjust your driving accordingly. See “Performance Traction Management (V-Series Only)” under Competitive Driving Mode (FE3 Only)
PERFORMANCE TRACTION 5 – RACE (V-Series Only)
This message displays when this Performance Traction Management (PTM) mode is selected. The TCS and StabiliTrak OFF cluster lights will also be on when this mode is selected. Launch Control is available when this mode is selected. In this mode, the Traction Control is available but intended for use on dry race track conditions. The Active Handling System is disabled when this mode is selected. This mode will require more driver skill than modes 1–4. Adjust your driving accordingly.
REAR AXLE OFF
When this message is displayed, the vehicle’s handling capabilities will be reduced during severe maneuvers.
StabiliTrak will be affected. See Traction Control/Electronic Stability
Control.
SERVICE ALL-WHEEL DRIVE
This message displays if a problem occurs with the All-Wheel-Drive (AWD) system. The vehicle will run in 2WD. This could be caused by:
- An electronics problem
- Worn-out or overheated clutch plates
- Various electrical issues
The system may need service. See your dealer.
SERVICE REAR AXLE
If there is a problem detected with the Electronic Limited-Slip Rear Axle, this message displays. When displayed, the
system is not operational and driving should be adjusted accordingly. Take the vehicle to your dealer for service as soon as possible.
When this message is displayed, the vehicle’s handling capabilities will be reduced during severe maneuvers.
StabiliTrak will be affected. See
Traction Control/Electronic Stability Control
SERVICE STABILITRAK
This message displays if there is a problem with the StabiliTrak system.
See Traction Control/Electronic Stability Control.
SERVICE SUSPENSION SYSTEM
This message displays when there is a problem with the Magnetic Ride Control system. See Driver Mode Control. Have the vehicle serviced by your dealer.
SERVICE TRACTION CONTROL
This message displays when there is a problem with the Traction Control. System (TCS). See Traction Control/ Electronic Stability Control
TRACTION CONTROL OFF
This message may display when the Traction Control System (TCS) has been turned off. See Traction Control/ Electronic Stability Control.
TRACTION CONTROL ON
This message may be displayed when the Traction Control System (TCS) has
been turned on. See Traction Control/ Electronic Stability Control
Airbag System Messages
SERVICE AIRBAG
This message displays if there is a problem with the airbag system. See your dealer for service.
Safety Belt Messages
AUTOMATIC SEATBELT TIGHTENING UNAVAILABLE
This message displays when the Automatic Safety Belt Tightening System, if equipped, becomes unavailable. This could be caused by a temporary condition. If the message continues to display, see your dealer.
SERVICE AUTOMATIC SEATBELT TIGHTENING SYSTEM
If this message displays, take the vehicle to your dealer to repair the Automatic Safety Belt Tightening System, if equipped.
Security Messages
THEFT ATTEMPTED
This message displays if the vehicle detects a tamper condition. Service Vehicle Messages
SERVICE AC SYSTEM
This message displays if there is a problem with the air conditioning system. Take the vehicle to your dealer for service.
SERVICE POWER STEERING
This message displays and a chime may sound when there may be a problem with the power steering system. If this message displays and a reduction in steering performance or loss of power steering assistance is noticed, see your dealer.
SERVICE STEERING COLUMN LOCK
This message displays if there is a problem with the steering column lock. Take the vehicle to your dealer for service.
SERVICE VEHICLE SOON
This message displays if there is a problem with the vehicle. Take the vehicle to your dealer for service.
Starting the Vehicle Messages
PRESS BRAKE TO START or PRESS CLUTCH TO START
This message is displayed when attempting to start the vehicle without first pressing the brake or clutch pedal.
SERVICE KEYLESS START SYSTEM
This message is displayed if there is a problem with the pushbutton start system. Take the vehicle to your dealer for service.
TURN STEERING WHEEL START VEHICLE AGAIN
This message may display when you try to start the vehicle, but the column remains locked. Try turning the steering wheel while starting the vehicle to unlock the steering column.
If the vehicle still does not start, turn the steering wheel the other way, and try starting the vehicle again.
Tire Messages
SERVICE TIRE MONITOR SYSTEM
This message displays if there is a problem with the Tire Pressure
Monitor System (TPMS). See Tire Pressure Monitor Operation
TIRE LEARNING ACTIVE
This message displays when the system is learning new tires. See Tire Pressure Monitor Operation.
TIRE PRESSURE LOW ADD AIR TO TIRE
This message displays when the pressure in one or more of the tires is low.
This message also displays LEFT FRONT, RIGHT FRONT, LEFT REAR, or RIGHT REAR to indicate the location of the low tire. The low tire pressure warning light will also come on. See Tire Pressure Light.
If a tire pressure message appears on the DIC, stop as soon as possible.
Inflate the tires by adding air until the tire pressure is equal to the values shown on the Tire and Loading Information label. See Tires Vehicle Load Limits and Tire Pressure.
More than one tire pressure message can appear at a time. The DIC also shows the tire pressure values.
Transmission Messages
MANUAL TRANSMISSION — RELEASE CLUTCH PEDAL
This message displays and a chime sounds if the manual transmission clutch pedal is partially applied for an extended period of time while the vehicle is being driven. Driving with the clutch pedal applied can reduce the life of the clutch. Fully release the clutch pedal after each gear change.
REDUCED PERFORMANCE — REDUCE CLUTCH USE
This message displays and engine torque is momentarily limited if
excessive manual transmission clutch slip is detected while the clutch pedal is fully released. Reduce clutch slip during acceleration from a stop and during gear changes to allow the clutch to cool. This should prevent further slips with the clutch pedal fully released. If this message displays repeatedly, see your dealer.
SERVICE TRANSMISSION
This message displays if there is a problem with the transmission. See your dealer.
SHIFT DENIED
This message displays when using the Driver Shift Control (DSC) and attempting to shift to a gear not appropriate for the vehicle speed and engine revolutions per minute (rpm).
SHIFT TO PARK
This message displays when the transmission needs to be shifted to P (Park). This may appear when turning the ignition off if the vehicle is not in P (Park).
TRANSMISSION HOT — IDLE ENGINE
This message displays and a chime sounds if the automatic transmission fluid in the vehicle gets hot. Driving with the automatic transmission fluid temperature high can cause damage to the vehicle. Stop the vehicle and let it idle to allow the transmission to cool. This message clears when the fluid temperature reaches a safe level.
TRANSMISSION HOT — SLOW DOWN
This message displays and a chime sounds if the manual transmission fluid is hot and if the vehicle speed is high. Driving with the manual transmission fluid temperature high can cause damage to the vehicle.
Drive at a slower speed to cool the manual transmission fluid. This message clears when the vehicle has slowed sufficiently or if the manual transmission fluid has cooled sufficiently.
Vehicle Reminder Messages
ICE POSSIBLE DRIVE WITH CARE
This message displays when ice conditions are possible. Vehicle Speed Messages.
SELECTED SPEED LIMIT EXCEEDED
This message is displayed when the vehicle speed is greater than the set speed.
VEHICLE SPEED LIMITED
This message is displayed under certain conditions when there is a problem and the vehicle’s speed is being limited.
Washer Fluid Messages
WASHER FLUID LOW ADD FLUID
This message may display when the washer fluid level is low. Fill the windshield washer reservoir as soon as possible. See Engine Compartment Overview for the location of the windshield washer reservoir. Also, see Washer Fluid.
Vehicle Personalization
Use the audio system controls to access the personalization menus for customizing vehicle features.
The following are all possible personalization features. Depending on the vehicle, some may not be available.
Base Radio Audio System Controls
MENU: Press the center of the knob to enter the menus and select menu items. Turn the knob to scroll through the menus.
S BACK: Press to exit or move backward in a menu.
To access the personalization menu:
- On the Home page, turn the MENU knob to highlight Settings and press the MENU knob.
- Turn the MENU knob to highlight the desired feature and press the MENU knob.
FAQs
The large X inch display screen on the 2017 Cadillac ATS gives drivers an immersive visual experience.
The display screen is indeed highly customizable; you can tailor the features and information to your own preferences.
The display screen does, in fact, work in unison with smartphones, offering enhanced connectivity through features like Apple CarPlay and Android Auto.
A number of driver assistance features, such as adaptive cruise control, collision alerts, and lane departure warning, are accessible through the 2017 Cadillac ATS display screen.
Their interface’s intuitive navigation design makes it possible for drivers to access and control a variety of features with little to no effort.
You can control and modify the climate control settings using the display screen, which makes it easy to maintain a comfortable driving environment.
To help you navigate effectively, the 2017 Cadillac ATS display screen undoubtedly has a navigation system with real-time traffic updates.
The touch sensitive controls on the display screen do indeed offer a contemporary and responsive touch to the overall user experience.
Yes, the display screen gives you access to a number of performance metrics that let you keep an eye on things like tire pressure and fuel efficiency.
The entertainment system’s centerpiece is the display screen, which provides a visually appealing interface for media access such as radio, music, and other choices.
The display screen is made to be visible in a variety of lighting scenarios, providing the best possible visibility both during the day and at night.
The display screen does, in fact, support voice commands, offering a convenient and hands free method to perform a number of tasks while driving.
Absolutely, Cadillac does release software updates on a regular basis to add new features and improve functionality, so your display screen is always up to date.
The display screen does indeed support split screening, which lets you view multiple functions at once and multitask.
The display screen does, in fact, support multiple device connections, giving passengers access to a wide range of entertainment options for the ride.1.
Useful Links
View Full PDF: 2017 Cadillac ATS Owner’s Manual| Auto User Guide
2023 Cadillac XT5 Specs, Price, Features, Mileage (Brochure)