Display Setting: 2013 Cadillac ATS Head-up Display Guide
The Head-up Display (HUD), a smart and cutting-edge technology of the 2013 Cadillac ATS, is redefining driving. With the use of state-of-the-art technology, drivers may remain informed without taking their eyes off the road by projecting crucial information straight onto the windshield. Right in the driver’s line of sight, the 2013 Cadillac ATS’s HUD seamlessly integrates essential information like speed, navigational directions, and safety alarms. Cadillac offers a more advanced display setup that improves driver convenience and safety. The HUD’s visibility and clarity make driving easier to understand and enable rapid access to important information. The 2013 ATS’s HUD offers drivers a cutting-edge driving experience that puts efficiency and security first. This introduction lays the groundwork for examining how the 2013 Cadillac ATS’s display setup redefines convenience and driving comfort.
Information Displays
Driver Information Center (DIC)
The DIC displays are shown in the left and right interactive display zones on the instrument cluster. The displays show the status of many vehicle systems. The controls for the DIC are on the right steering wheel control.
: Press to move up or down in a list.
Press to move between the interactive display zones in the cluster. Press 
to go back to the previous menu.
SEL (Select): Press to open a menu or select a menu item. Press and hold to reset values on certain screens.
DIC Information Display Options
The information displayed on the DIC can be turned on or off through the Settings menu.
- Press SEL while viewing the settings page in the center displays the zone on the cluster.
- Scroll to Info Pages and press SEL.
- Press to move through the list of possible information displays.
- Press SEL while an item is highlighted to select or deselect that item. When an item is selected, a checkmark will appear next to it.
DIC Information Displays
The following is the list of all possible DIC information displays. Some of the information displays may not be available for your particular vehicle.
- Speed: The digital speedometer shows the vehicle speed in either kilometers per hour (km/h) or miles per hour (mph).
- Trip 1 and Trip 2: The Trip display shows the current distance traveled, in either kilometres (km) or miles (mi), since the trip odometer was last reset. The trip odometer can be reset by pressing and holding SEL while this display is active.
- Fuel Range: The Fuel Range display shows the approximate distance the vehicle can be driven without refueling. LOW will be displayed when the vehicle is low on fuel. The fuel range estimate is based on an average of the vehicle’s fuel economy over recent driving history and the amount of fuel remaining in the fuel tank.
- Average Fuel Economy: The Average Fuel Economy display shows the approximate average liters per 100 kilometers (L/100 km) or miles per gallon (mpg). This number is calculated based on the number of L/100 km (mpg) recorded since the last time this menu item was reset. The Average Fuel Economy can be reset by pressing and holding SEL while this display is active.
- Instantaneous Fuel Economy: The Instantaneous Fuel Economy display shows the current fuel economy in either liter per 100 kilometers (L/100 km) or miles per gallon (mpg). This number reflects only the fuel economy that the vehicle has right now and changes frequently as driving conditions change.
- Average Speed: The Average Speed display shows the average speed of the vehicle in kilometers per hour (km/h) or miles per hour (mph). This average is calculated based on the various vehicle speeds recorded since the last reset of this value. The average speed can be reset by pressing and holding SEL while this display is active.
- Timer: This display can be used as a timer. To start the timer, press SEL while this display is active. The display will show the amount of time that has passed since the timer was last reset. To stop the timer, press SEL briefly while this display is active and the timer is running. To reset the timer to zero, press and hold SEL while this display is active.
- Compass: The Compass display shows the direction the vehicle is driving.
- Turn Arrow: The Turn Arrow display shows the next maneuver when using route guidance.
- Travel Time: The Travel Time display shows the estimated time duration remaining for the current route.
- Distance to Destination: The Distance to Destination display shows the distance to the destination when using route guidance.
- Speed Limit: The Speed Limit display shows the current speed limit. The information for this page comes from a roadway database.
- Speed Warning: The Speed Warning display allows the driver to set a speed that they do not want to exceed. To set the Speed Warning, press SEL when the Speed Warning is displayed. Pressto adjust the value. This feature can be turned off by pressing and holding SEL while viewing this page. If the selected speed limit is exceeded, a pop-up warning is displayed and a chime may sound.
- Cruise Set Speed: The Cruise Set Speed display shows the speed the cruise control or Adaptive Cruise Control is set to.
- Battery Voltage: The Battery Voltage display shows the current battery voltage.
- Oil Life: The Oil Life display shows an estimate of the oil’s remaining useful life. If REMAINING OIL LIFE99% is displayed, that means 99% of the current oil life remains. When the remaining oil life is low, the CHANGE ENGINE OIL SOON message will appear on the display. See Engine Oil Messages on page 5‑35. The oil should be changed as soon as possible. See Engine Oil on pages 10‑11. In addition to the engine oil life system monitoring the oil life, additional maintenance is recommended in the Maintenance Schedule. See Maintenance Schedule on page 11‑3.
Remember, the Oil Life display must be reset after each oil change. It will not reset itself. Also, be careful not to reset the Oil Life display accidentally at any time other than when the oil has just been changed. It cannot be reset accurately until the next oil change. To reset the engine oil life system, press and hold SEL for several seconds while the Oil Life display is active. See Engine Oil Life System on pages 10‑13. - Tire Pressure: The Tire Pressure display shows the approximate pressures of all four tires. Tire pressure is displayed in either kilopascal (kPa) or pounds per square inch (psi). If the pressure is low, the value for that tire is shown in amber. See Tire Pressure Monitor System on page 10‑52 and Tire Pressure Monitor Operation on page 10‑53.
- Blank Page: The Blank Page display allows for no information to be displayed in the DIC display zone(s).
Head-Up Display (HUD)
WARNING
If the HUD image is too bright or too high in your field of view, it may take you more time to see things you need to see when it is dark outside. Be sure to keep the HUD image dim and placed low in your field of view.
For vehicles with HUD, some information concerning the operation of the vehicle is projected onto the windshield. This includes the speedometer reading, rpmreading, transmission position, compass heading, audio/phone information, and Turn-by-Turn Navigation information. The images are projected through the HUD lens on the driver’s side of the instrument panel.
The HUD may display different alerts and information for vehicles equipped with these features:
- Traction Control System (TCS)
- StabiliTrak System
- Collision Alert
- Gap Adjust
- Upcoming Maneuver from OnBoard Navigation
- Upcoming Maneuver from OnStar
- Incoming Call
When the HUD is on, the speedometer reading is continually displayed, except when an imminent navigation maneuver is being shown. The current audio, phone, or navigation alert temporarily displays if their status changes. This occurs if the steering wheel controls are used to adjust a setting or acknowledge an alert.
The HUD control is to the left of the steering wheel.
To adjust the HUD image so that items are properly displayed:
- Adjust the driver seat to a comfortable position.
- Start the engine.
- Adjust the HUD controls.
Use the following settings to adjust the HUD.
(Image Adjustment): Press down or lift to center the HUD image. The HUD image can only be adjusted up and down, not side to side.- !(Display View): Press to select the display view. Release when the desired display is shown on the HUD. If vehicle messages are displayed, pressing the DIC select button may clear the message. See Driver Information Center (DIC) on page 5‑26.
(Brightness): Lift and hold to brighten the display. Press down and hold to dim the display. Hold down to turn the display off.
There are four views in the HUD display:
- Speed View: This display gives the speedometer reading (in English or metric units), speed limit, Adaptive Cruise Control speed, Forward Collision Alert, Lane Departure Warning, and Vehicle Ahead indicator. Some information only appears on vehicles that have these features, and when they are active.
- Audio/Phone View: This display includes the information in speed view along with audio/phone information. The current radio station, media type, and incoming calls will be displayed.
- Navigation View: This display includes the information in speed view along with Turn-by-Turn Navigation information. The compass heading is displayed when navigation routing is not active. All formats will briefly show the Turn-by-Turn Navigation alerts and provide details about the next driving maneuver to be made.
When you are near the next maneuver, the HUD displays a distance bar that will empty the closer you get to the maneuver. All navigation information is provided to the HUD by the navigation radio or OnStar (if equipped).
- Performance View: This display gives the speedometer reading (in English or metric units), rpm reading, transmission positions, and gear shift indicator.
The HUD image displayed on the windshield will automatically dim and brighten to compensate for outside lighting. However, the HUD brightness control can still be adjusted as needed.
The HUD image can temporarily light up depending on the angle and position of the sunlight on the HUD display. This is normal and will change when the angle of the sunlight on the HUD display changes.
Polarized sunglasses could make the HUD image harder to see.
Care of the HUD
Clean the inside of the windshield as needed to remove any dirt or film that could reduce the sharpness or clarity of the HUD image.
To clean the HUD lens, use a soft, clean cloth that has household glass cleaner sprayed on it. Wipe the HUD lens gently, then dry it. Do not spray cleaner directly on the lens because the cleaner could leak into the unit.
If You Cannot See the HUD Image When The Ignition Is On
- Is anything covering the HUD lens?
- Is the HUD dimmer setting bright enough?
- Is the HUD image adjusted to the proper height?
- Are you wearing polarized sunglasses?
If the HUD Image Is Not Clear
- Is the HUD image too bright?
- Are the windshield and HUD lenses clean?
If the HUD image is not correct, contact your dealer.
Keep in mind that the windshield is part of the HUD system. See Windshield Replacement on page 10‑30.
FAQs
Drivers can access and adjust the head-up display settings in the 2013 Cadillac ATS through the vehicle’s infotainment system or instrument cluster menu, where they can customize the display’s brightness, content, and position according to their preferences.
The head-up display in the 2013 Cadillac ATS can typically display information such as vehicle speed, navigation instructions, incoming call alerts, and safety warnings, providing drivers with essential information without requiring them to take their eyes off the road.
Yes, drivers can typically adjust the position and height of the head-up display in the 2013 Cadillac ATS using the vehicle’s settings menu, allowing them to find the optimal display position for visibility and comfort.
The head-up display in the 2013 Cadillac ATS enhances driver safety and convenience by projecting important information directly onto the windshield, reducing the need for drivers to look away from the road to check speed, navigation directions, or other critical data.
Yes, drivers can typically customize the content and layout of the head-up display in the 2013 Cadillac ATS through the vehicle’s settings menu, allowing them to prioritize the information they find most relevant and useful while driving.
The head-up display in the 2013 Cadillac ATS may feature automatic brightness adjustment to adapt to different driving conditions, ensuring optimal visibility of displayed information in various lighting environments.
Yes, drivers can typically disable or enable the head-up display in the 2013 Cadillac ATS through the vehicle’s settings menu, allowing them to choose whether or not to use this feature based on their preferences.
Depending on the model and trim level, the head-up display in the 2013 Cadillac ATS may offer color customization options, allowing drivers to select their preferred display color scheme for optimal visibility and aesthetics.
The head-up display in the 2013 Cadillac ATS may interact with other vehicle systems such as the navigation and entertainment systems by displaying relevant information such as turn-by-turn directions or audio track information directly in the driver’s line of sight.
Yes, drivers can typically adjust the brightness of the head-up display in the 2013 Cadillac ATS through the vehicle’s settings menu, allowing them to optimize visibility based on ambient lighting conditions.
The head-up display in the 2013 Cadillac ATS helps minimize driver distraction by presenting important information directly in the driver’s line of sight, reducing the need to look away from the road to check speed, navigation directions, or other critical data.
Yes, drivers can typically choose which information to display on the head-up display in the 2013 Cadillac ATS through the vehicle’s settings menu, allowing them to customize the display to show only the information they find most relevant and useful.
The head-up display in the 2013 Cadillac ATS enhances driver awareness of speed limits and traffic conditions by displaying speed limit information and alerts for upcoming traffic congestion or hazards directly in the driver’s line of sight.
Useful Link
2023 Cadillac CT4 Specs, Price, Features, Mileage and Review