Auto User Guide

Display Setting: Cadillac ATS 2015 Screen Messages Guide

Cadillac-logo

Display Setting: Cadillac ATS 2015 Screen Messages Guide

The 2015 Cadillac ATS’s display settings include a wide range of features and capabilities meant to improve the driving experience. As soon as you interact with the screen, you are met with an easy-to-use interface that combines well with the car’s systems and lets you quickly alter different elements to your liking. The Cadillac ATS display guarantees a customized and user-friendly interface, whether it is for altering the brightness and contrast for the best vision, customizing the layout to highlight important information, or gaining access to extensive settings for audio, navigation, and connectivity. Its vivid screen helps you navigate through different operations with ease by delivering clear and succinct text in addition to crisp images and beautiful colors. The display’s lengthy introduction highlights Cadillac’s dedication to providing a sophisticated and technologically advanced driving experience for enthusiasts and casual drivers alike, whether you’re navigating through menus, altering climate controls, or receiving vital notifications.

2023 cadillac xt6 Specs, Price, Features, Mileage and Review

Information Displays

Driver Information Center (DIC)
The DIC displays are shown in the left and right interactive display zones on the instrument cluster. The displays show the status of many vehicle systems. The controls for the DIC are on the right steering wheel control.

Display Setting Cadillac ATS 2015 Screen Messages Guide (1)

Display Setting Cadillac ATS 2015 Screen Messages Guide (2) : Press to move up or down in a list.

Display Setting Cadillac ATS 2015 Screen Messages Guide (3): Press to move between the interactive display zones in the cluster.

Press

Display Setting Cadillac ATS 2015 Screen Messages Guide (4) to go back to the previous menu.
SEL (Select): Press to open a menu or select a menu item. Press and hold to reset values on certain screens

DIC Information Display Options
The information displays on the DIC can be turned on or off through the Settings menu.

  1. Press SEL while viewing the Settings page in the center display zone on the cluster.
  2. Scroll to Info Pages and press SEL.Pres
  3. Display Setting Cadillac ATS 2015 Screen Messages Guide (2)to move through the list of possible information displays.
  4. Press SEL while an item is highlighted to select or deselect that item. When an item is selected, a checkmark will appear next to it.

DIC Information Displays
The following is the list of all possible DIC information displays. Some of the information displays may not be available for your particular vehicle.

Speed: Shows the vehicle speed in either kilometers per hour (km/h) or miles per hour (mph).

Trip 1 and Trip 2 (Base Cluster) / Trip 1 or Trip 2 and Average Fuel Economy (Uplevel Cluster): Shows the current distance traveled, in either kilometer (km) or miles (mi), since the trip odometer was last reset. The trip odometer can be reset by pressing and holding SEL while this display is active. The average fuel economy shows the approximate average liters per 100 kilometers (L/100 km) or miles per gallon (mpg). This number is calculated based on the number of L/100 km (mpg) recorded since the last time this menu item was reset. This number reflects only the approximate average fuel economy that the vehicle has right now and will change as driving conditions change. The Average Fuel Economy can be reset along with the trip odometer by pressing and holding SEL while this display is active.

Fuel Range: This shows the approximate distance the vehicle can be driven without refueling. LOW will be displayed when the vehicle is low on fuel. The fuel range estimate is based on an average of the vehicle’s fuel economy over recent driving history and the amount of fuel remaining in the fuel tank.

Average Fuel Economy (Base Cluster): Shows the approximate average liters per 100 kilometers (L/100 km) or miles per gallon (mpg). This number is calculated based on the number of L/100 km (mpg) recorded since the last time this menu item was reset. This number reflects only the approximate average fuel economy that the vehicle has right now and will change as driving conditions change. The Average Fuel The economy can be reset by pressing and holding SEL while this display is active.

Instantaneous Fuel Economy: Shows the current fuel economy in either liters per 100 kilometers (L/100 km) or miles per gallon (mpg). This number reflects only the approximate fuel economy that the vehicle has right now and changes frequently as driving conditions change.

Average Speed: This shows the average speed of the vehicle in kilometers per hour (km/h) or miles per hour (mph). This average is calculated based on the various vehicle speeds recorded since the last reset of this value. The average speed can be reset by pressing and holding SEL while this display is active.

Timer: This display can be used as a timer. To start the timer, press SEL while this display is active. The display will show the amount of time that has passed since the timer was last reset. To stop the timer, press SEL briefly while this display is active and the timer is running. To reset the timer to zero, press and hold SEL while this display is active. Compass (Base Cluster): Shows the direction the vehicle is driving. Turn Arrow: Shows the next maneuver when using route guidance.

Travel Time: This shows the estimated time duration remaining for the current route.

Estimated Time to Arrival: This shows the approximate time of arrival to your destination when using the route guidance.

Speed Limit: Shows the current speed limit on vehicles with the navigation system. The information for this page comes from a roadway database.

Speed Warning: Allows the driver to set a speed that they do not want to exceed. To set the Speed Warning, press SEL when the Speed Warning is displayed. Press

Display Setting Cadillac ATS 2015 Screen Messages Guide (2)to adjust the value. This feature can be turned off by pressing and holding SEL while viewing this page. If the selected speed limit is exceeded, a pop-up warning is displayed and a chime may sound.

Cruise Set Speed: This shows the speed the cruise control or Adaptive Cruise Control (ACC, if equipped) is set to.

Gap Setting: When ACC (if equipped) has been engaged, this page shows the current gap setting along with the vehicle ahead telltale.

Battery Voltage: Shows the current battery voltage.

Oil Life: Shows an estimate of the oil’s remaining useful life.

If REMAINING OIL LIFE 99% is displayed, that means 99% of the current oil life remains. When the remaining oil life is low, the CHANGE ENGINE OIL SOON message will appear on the display.  The oil should be changed as soon as possible. In addition to the engine oil life system monitoring the oil life, additional maintenance is recommended in the Maintenance Schedule. The Oil Life display must be reset after each oil change. It will not reset itself. Do not to reset the Oil Life display accidentally at any time other than when the oil has just been changed. It cannot be reset accurately until the next oil change. To reset the engine oil life system, press and hold SEL for several seconds while the Oil Life display is active.

Tire Pressure: Shows the approximate pressures of all four tires. Tire pressure is displayed in either kilopascal (kPa) or in pounds per square inch (psi). If the pressure is low, the value for that tire is shown in amber.

Vehicle Odometer (Base Cluster): Shows the odometer.

Blank Page: The Blank Page display allows for no information to be displayed in the DIC display zone(s).

Head-Up Display (HUD)

Warning
If the HUD image is too bright or too high in your field of view, it may take you more time to see things you need to see when it is dark outside. Be sure to keep the HUD image dim and placed low in your field of view. If equipped with HUD, some information concerning the operation of the vehicle is projected onto the windshield. The information is projected through the HUD lens on the driver’s side of the instrument panel and focused out toward the front of the vehicle.

Caution
If you try to use the HUD image as a parking aid, you may misjudge the distance and damage your vehicle. Do not use the HUD image as a parking aid. The HUD information can be displayed in various languages. The speedometer reading and other numerical values can be displayed in either English or metric units. The language selection is changed through the radio and the units of measurement is changed through the instrument cluster.

Display Setting Cadillac ATS 2015 Screen Messages Guide (5)

HUD Display on the Vehicle
Windshield

The HUD may display some of the following vehicle information and vehicle messages or alerts:

  • Speed
  • Tachometer
  • Audio
  • Phone
  • Navigation
  • Collision Alert
  • Cruise Control
  • Lane Departure
  • Low Fuel

Some vehicle messages or alerts displayed in the HUD may be cleared by using the steering wheel controls.

Display Setting Cadillac ATS 2015 Screen Messages Guide (6)

The HUD control is to the left of the steering wheel.

To adjust the HUD image:

  1. Adjust the driver seat to a comfortable position.
  2. Start the engine.

Use the following settings to adjust the HUD.

Display Setting Cadillac ATS 2015 Screen Messages Guide (7)(Image Adjustment): Press down or lift up to center the HUD image. The HUD image can only be adjusted up and down, not side to side.

INFO(Display View): Press to select the display view. Each press will change the display view.

Display Setting Cadillac ATS 2015 Screen Messages Guide (8)(Image Brightness): Lift up and hold to brighten the display. Press down and hold to dim the display. Hold down to turn the display off.

The HUD image will automatically dim and brighten to compensate for outside lighting. The HUD brightness control can also be adjusted as needed.

The HUD image can temporarily light up depending on the angle and position of the sunlight on the HUD display. This is normal.

Polarized sunglasses could make the HUD image harder to see.

HUD Views
There are four views in the HUD. Some vehicle information and vehicle messages or alerts may be displayed in any view.

Display Setting Cadillac ATS 2015 Screen Messages Guide (9)

Metric

Display Setting Cadillac ATS 2015 Screen Messages Guide (10)

Speed View: This display gives the speedometer reading (in English or metric units), Adaptive Cruise Control speed, Forward Collision Alert, Lane Departure Warning, and Vehicle Ahead indicator. Some information only appears on vehicles that have these features, and when they are active.

Display Setting Cadillac ATS 2015 Screen Messages Guide (11)

Metric

Display Setting Cadillac ATS 2015 Screen Messages Guide (12)

English

Audio/Phone View: This display includes the information in speed view along with audio/phone information. The current radio station, media type, and incoming calls will be displayed.

All HUD views may briefly display audio information when the driver uses the steering wheel controls to adjust the audio settings appearing in the instrument cluster.

Incoming phone calls appearing in the instrument cluster may also display in any HUD view.

Display Setting Cadillac ATS 2015 Screen Messages Guide (13)

Navigation View: This display includes the information in speed view along with Turn-by-TurnNavigation information. The compass heading is displayed when navigation routing is not active.

Navigation Turn-by-Turn Alerts shown in the instrument cluster may also be displayed in any HUD view.

Display Setting Cadillac ATS 2015 Screen Messages Guide (14)

Performance View: This display gives the speedometer reading (in English or metric units), rpm reading, transmission positions, and gear shift indicator.

Care of the HUD
Clean the inside of the windshield to remove any dirt or film that could reduce the sharpness or clarity of the HUD image.

Clean the HUD lens with a soft cloth sprayed with glass cleaner. Wipe the lens gently, then dry it.

HUD Troubleshooting
Check that:

  • Nothing is covering the HUD lens.
  • HUD brightness setting is not too dim or too bright.
  • HUD is adjusted to the proper height.
  • Polarized sunglasses are not worn.
  • The windshield and HUD lens are clean.

If the HUD image is not correct, contact your dealer.
The windshield is part of the HUD system.

Vehicle Messages

Messages displayed on the DIC indicate the status of the vehicle or some action that may be needed to correct a condition. Multiple messages may be displayed one after the other. The messages that do not require immediate action can be acknowledged and cleared by pressing SEL. The messages that require immediate action cannot be cleared until that action is performed. All messages should be taken seriously and clearing the messages does not correct the problem. The following are some of the vehicle messages that may be displayed depending on the vehicle content.

Battery Voltage and Charging Messages

BATTERY SAVER ACTIVE
This message displays when the vehicle has detected that the battery voltage is dropping beyond a reasonable point. The battery-saver system starts reducing features of the vehicle that may be noticed. At the point that features are disabled, this message displays. Turn off unnecessary accessories to allow the battery to recharge.

LOW BATTERY
This message is displayed when the battery voltage is low.

SERVICE BATTERY CHARGING SYSTEM
This message is displayed when there is a fault in the battery charging system. Take the vehicle to your dealer for service.

TRANSPORT MODE ON
This message is displayed when the vehicle is in transport mode. Some features can be disabled while in this mode, including Remote Keyless Entry (RKE), remote start, and the vehicle alarm system. Take the vehicle to your dealer for service to turn the transport mode off.

Brake System Messages

BRAKE FLUID LOW
This message is displayed when the brake fluid level is low.

STEP ON THE BRAKE TO RELEASE PARK THE BRAKE
This message is displayed if you attempt to release the Electric Parking Brake without the brake pedal applied.

RELEASE PARKING BRAKE
This message is displayed if the Electric Parking Brake is on while the vehicle is in motion.

SERVICE BRAKE ASSIST
This message may be displayed when there is a problem with the brake boost assist system. When this message is displayed, the brake boost assist motor might be heard operating and you might notice pulsation in the brake pedal. This is normal under these conditions. Take the vehicle to your dealer for service.

SERVICE PARKING BRAKE
This message is displayed when there is a problem with the parking brake. Take the vehicle to your dealer for service.

Compass Messages
Dashes may be displayed if the vehicle temporarily loses communication with the Global Positioning System (GPS).

Cruise Control Messages

ADAPTIVE CRUISE SET TO XXX
This message displays when the Adaptive Cruise Control (ACC) speed is set.

ADAPTIVE CRUISE TEMPORARILY UNAVAILABLE
This message displays when attempting to activate Adaptive Cruise Control (ACC) when it is temporarily unavailable. The ACC system does not need service.

This can occur under the following conditions:

  • The radar is not clean. Keep the radar sensors free of mud, dirt, snow, ice, and slush. Clean the entire front and/or rear of the vehicle.
  • Heavy rain or snow is interfering with the radar object detection or camera performance.

CRUISE SET TO XXX
This message displays when the cruise control speed is set.

NO CRUISE BRAKING GAS PEDAL APPLIED
This message displays when Adaptive Cruise Control (ACC) is active and the driver is pressing the gas pedal. When this occurs, ACC will not brake.

SERVICE ADAPTIVE CRUISE CONTROL
This message displays when the Adaptive Cruise Control (ACC) needs service. Take the vehicle to your dealer.

SHIFT TO PARK BEFORE EXITING
This message may display if Adaptive Cruise Control (ACC) is engaged in holding the vehicle at a stop, and the driver attempts to exit the vehicle. Put the vehicle in P (Park) before exiting.

Door Ajar Messages

DOOR OPEN
A door open symbol will be displayed on the DIC showing which door is open. If the vehicle has been shifted out of P (Park), a DOOR OPEN message will also be displayed. The DOOR OPEN message may also be displayed if the vehicle starts to move. Close the door completely.

HOOD OPEN
This message will display along with a hood open symbol when the hood is open. Close the hood completely.

TRUNK OPEN
This message will display along with a symbol when the trunk is open. Close the trunk completely.

Engine Cooling System Messages

A/C OFF ENGINE COOLANT HOT
This message displays when the engine coolant becomes hotter than the normal operating temperature. To avoid added strain on a hot engine, the air conditioning compressor automatically turns off. When the coolant temperature returns to normal, the air conditioning compressor turns back on. The vehicle can continue to be driven. If this message continues to appear, have the system repaired by your dealer as soon as possible to avoid damage to the engine.

ENGINE OVERHEATED — IDLE ENGINE
This message displays and a chime sounds when the engine coolant temperature is too hot. The engine coolant temperature warning light will also be on. Stop and allow the vehicle to idle until it cools down.

ENGINE OVERHEATED — TURN VEHICLE OFF
This message displays and a continuous chime sounds if the engine cooling system reaches unsafe temperatures for operation. The engine coolant temperature warning light will flash. Stop and turn off the vehicle as soon as it is safe to do so to avoid severe damage. This message clears when the engine has cooled to a safe operating temperature.

Engine Oil Messages

CHANGE ENGINE OIL SOON
This message displays when the engine oil needs to be changed. When you change the engine oil, be sure to reset the oil life system.

ENGINE OIL HOT, IDLE ENGINE
This message displays when the engine oil temperature is too hot. Stop and allow the vehicle to idle until it cools down.

ENGINE OIL LOW — ADD OIL
On some vehicles, this message displays when the engine oil level may be too low. Check the oil level before filling to the recommended
level. If the oil is not low and this message remains on, take the vehicle to your dealer for service.

OIL PRESSURE LOW — STOP ENGINE
This message displays if low oil pressure levels occur. Stop the vehicle as soon as safely possible and do not operate it until the cause of the low oil pressure has been corrected. Check the oil as soon as possible and have the vehicle serviced by your dealer.

Engine Power Messages

ENGINE POWER IS REDUCED
This message displays when the vehicle’s engine power is reduced. Reduced engine power can affect the vehicle’s ability to accelerate. If this message is on, but there is no reduction in performance, proceed to your destination. The performance may be reduced the next time the vehicle is driven. The vehicle may be driven at a reduced speed while this message is on, but maximum acceleration and speed may be reduced. Anytime this message stays on, the vehicle should be taken to your dealer for service as soon as possible.

Fuel System Messages

FUEL LEVEL LOW
This message displays when the vehicle is low on fuel. Refuel as soon as possible.

TIGHTEN GAS CAP
This message displays when the fuel cap is not on tight. Tighten the fuel cap.

Key and Lock Messages

NO REMOTE DETECTED
This message displays when the transmitter battery may be weak.

NO REMOTE KEY WAS DETECTED PLACE THE KEY IN THE TRANSMITTER POCKET THEN START YOUR VEHICLE
This message displays when trying to start the vehicle if an RKE transmitter is not detected. The transmitter battery may be weak.

NO REMOTE DETECTED PRESS BRAKE TO RESTART
This message displays when attempting to turn off the vehicle and the RKE transmitter is no longer detected. Restarting is allowed without the RKE transmitter for five minutes. Press the brake pedal to restart the vehicle.

NUMBER OF KEYS PROGRAMMED
This message displays when programming new keys to the vehicle.

REMOTE LEFT IN VEHICLE
This message displays when leaving the vehicle with the RKE transmitter still inside.

REPLACE BATTERY IN THE REMOTE KEY
This message displays when the battery in the RKE transmitter needs to be replaced.

Lamp Messages

AFL (ADAPTIVE FORWARD LIGHTING) LAMPS NEED SERVICE
This message displays when the AFL system is disabled and needs service. See your dealer.

AUTOMATIC LIGHT CONTROL ON/OFF
This message is displayed when the exterior lamp control is in AUTO and the lights have turned on or off.

XXX TURN INDICATOR FAILURE
When one of the turn signals is out, this message displays to show which bulb needs to be replaced.

TURN SIGNAL ON
This message is displayed if the turn signal has been left on. Turn off the turn signal.

Object Detection System Messages

24 GHz RADARS OFF
This message is displayed when driving in certain areas where there may be radar interference. Adaptive Cruise Control (ACC), Forward Collision Alert (FCA), and the Active Emergency Braking System may not work or may not work as well. The vehicle does not need service.

AUTOMATIC COLLISION PREP OFF
This message displays when the Active Emergency Braking System has been turned off.

AUTOMATIC COLLISION PREP REDUCED
This message displays when the Active Emergency Braking System has been set to the Alert setting. This setting disables most automatic braking functions of the Auto Collision Preparation feature. Some last-second automatic braking capability is still provided with the Alert setting, but braking is less likely to occur.

AUTOMATIC COLLISION PREP UNAVAILABLE
This message displays when the Active Emergency Braking System has been unavailable for some time. The Active Emergency Braking System does not need service.

This can occur under the following conditions:

  • The radar is not clean. Keep the radar sensors free of mud, dirt, snow, ice, and slush. Clean the entire front and/or rear of the vehicle.
  • Heavy rain or snow is interfering with the radar object detection or camera performance.

This message may also be displayed if there is a problem with the StabiliTrak system.

FORWARD COLLISION ALERT OFF
This message displays when the Forward Collision Alert has been turned off.

FRONT CAMERA BLOCKED CLEAN WINDSHIELD
This message displays when the camera is blocked. Cleaning the outside of the windshield behind the rearview mirror may correct the issue. The Lane Keep Assist (LKA) and the Lane Departure Warning (LDW) system will not operate. Adaptive Cruise Control (ACC), Forward Collision Alert (FCA), and the Active Emergency Braking System may not work or may not work as well.

LANE CHANGE ALERT OFF
This message indicates that the driver has turned the Side Blind Zone Alert (SBZA) and Lane Change Alert (LCA) systems off.

LANE-KEEPING ASSIST UNAVAILABLE
This message displays when the Lane Keep Assist (LKA) and Lane Departure Warning (LDW) systems are temporarily unavailable. The LKA system does not need service.

This message could be due to the camera being blocked. Cleaning the outside of the windshield behind the rearview mirror may correct the issue.

REAR AUTO BRAKE/PARK ASSIST OFF
This message displays when the Parking Assist system has been turned off or when there is a temporary condition causing the system to be disabled.

REAR AUTO BRAKE AND PARK ASSIST UNAVAILABLE
This message displays when attempting to activate the parking and backing features of the Driver Assistance System when they are temporarily unavailable. The system does not need service.
This can occur under the following conditions:

  • The radar is not clean. Keep the radar sensors free of mud, dirt, snow, ice, and slush. Clean the entire front and/or rear of the vehicle.
  • Heavy rain or snow is interfering with the radar object detection or camera performance.

SERVICE AUTOMATIC COLLISION PREP
If this message displays, take the vehicle to your dealer to repair the system.

SERVICE DRIVER ASSIST SYSTEM
If this message displays, take the vehicle to your dealer to repair the system.

Adaptive Cruise Control (ACC), Forward Collision Alert (FCA), Active Emergency Braking System, Assistance Systems for Parking or Backing, and/or Lane Keep Assist  (LKA) system may not work. Do not use these systems until the vehicle has been repaired.

SERVICE FRONT CAMERA
If this message remains on after continued driving, take the vehicle to your dealer for service. Do not use the Lane Keep Assist (LKA), Lane Departure Warning (LDW), and Forward Collision Alert (FCA) features.

SERVICE PARK ASSIST
This message displays if there is a problem with the Parking Assist system. Do not use this system to help you park. See your dealer for service.

SERVICE REAR AUTO BRAKE AND PARK ASSIST
This message displays if there is a problem with the parking and backing features of the Drive Assistance System. Do not use this system to help park or back the vehicle. See your dealer for service.

SERVICE SIDE DETECTION SYSTEM
If this message remains on after continued driving, the vehicle needs service. Side Blind Zone Alert (SBZA), Lane Change Alert (LCA), and Rear Cross Traffic Alert (RCTA) features will not work. Take the vehicle to your dealer.

SIDE DETECTION SYSTEM UNAVAILABLE
This message indicates that Side Blind Zone Alert (SBZA), Lane Change Alert (LCA), and Rear Cross Traffic Alert (RCTA) are disabled either because the sensor is blocked and cannot detect vehicles in the blind zone, or the vehicle is passing through an open area, such as the desert, where there is insufficient data for operation. This message may also activate during heavy rain or due to road spray. The vehicle does not need service.

TAKE STEERING
If LKA does not detect active driver steering, an alert and chime may be provided. Move the steering wheel to dismiss.

Ride Control System Messages

ALL-WEEL DRIVE OFF If the vehicle has the All-Wheel-Drive (AWD) system, this message displays when there is a temporary condition making the AWD system unavailable. The vehicle will run in 2WD. This could be caused by:

  • Loss of wheel or vehicle speed
  • AWD system overheat
  • Certain vehicle electrical conditions

This message turns off when the above conditions are no longer present and the warning message is reset.

SERVICE ALL-WHEEL DRIVE
This message displays if a problem occurs with the All-Wheel-Drive (AWD) system. The vehicle will run in 2WD. This could be caused by:

  • An electronics problem
  • Worn-out or overheated clutch plates
  • Various electrical issues

The system may need service. See your dealer.

SERVICE STABILITRAK
This message displays if there is a problem with the StabiliTrak system.

SERVICE SUSPENSION SYSTEM
This message displays when there is a problem with the Magnetic Ride Control™ system. Have the vehicle serviced by your dealer.

SERVICE TRACTION CONTROL
This message displays when there is a problem with the Traction Control System (TCS).

TRACTION CONTROL OFF
This message may display when the Traction Control System (TCS) has been turned off.

TRACTION CONTROL ON
This message may display when the Traction Control System (TCS) has been turned on.

Airbag System Messages

SERVICE AIRBAG
This message displays if there is a problem with the airbag system. Take the vehicle to your dealer for service.

Safety Belt Messages

AUTOMATIC SEATBELT TIGHTENING UNAVAILABLE
This message displays when the Automatic Safety Belt Tightening System if equipped, becomes unavailable. This could be caused by a temporary condition. If the message continues to display, see your dealer.

SERVICE AUTOMATIC SEATBELT TIGHTENING SYSTEM
If this message displays, take the vehicle to your dealer to repair the Automatic Safety Belt Tightening System, if equipped.

Security Messages

THEFT ATTEMPTED
This message displays if the vehicle detects a tamper condition. Service Vehicle Messages

SERVICE AC SYSTEM
This message displays if there is a problem with the air conditioning system. Take the vehicle to your dealer for service.

SERVICE POWER STEERING
This message displays if there is a problem with the power steering system. Take the vehicle to your dealer for service.

SERVICE STEERING COLUMN LOCK
This message displays if there is a problem with the steering column lock. Take the vehicle to your dealer for service.

SERVICE VEHICLE SOON
This message displays if there is a problem with the vehicle. Take the vehicle to your dealer for service.

Starting the Vehicle Messages

PRESS THE BRAKE TO START THE VEHICLE
This message is displayed when attempting to start the vehicle without first pressing the brake pedal.

SERVICE KEYLESS START SYSTEM
This message is displayed if there is a problem with the pushbutton start system. Take the vehicle to your dealer for service.

TURN STEERING WHEEL START VEHICLE AGAIN
This message may display when you try to start the vehicle, but the column remains locked. Try turning the steering wheel while starting the vehicle to unlock the steering column. If the vehicle still does not start, turn the steering wheel the other way, and try starting the vehicle again.

Tire Messages

SERVICE TIRE MONITOR SYSTEM
This message displays if there is a problem with the Tire Pressure Monitor System (TPMS).

TIRE LEARNING ACTIVE
This message displays when the system is learning new tyres.

TYRE LOW ADD AIR TO TYRE
This message displays when the pressure in one or more of the tires is low.

This message also displays LEFT FRONT, RIGHT FRONT, LEFT REAR, or RIGHT REAR to indicate the location of the low tire. The low tyre pressure warning light will also come on.

If a tyre pressure message appears on the DIC, stop as soon as you can. Inflate the tires by adding air until the tire pressure is equal to the values shown on the Tire and Loading Information label.

You can receive more than one tyre pressure message at a time. The DIC also shows the tyre pressure values.

Transmission Messages

SERVICE TRANSMISSION
This message displays if there is a problem with the transmission. See your dealer.

SHIFT DENIED
This message displays when using the Driver Shift Control (DSC) and attempting to shift to a gear not appropriate for the vehicle’s speed
and engine revolutions per minute (rpm).

SHIFT TO PARK
This message displays when the transmission needs to be shifted to P (Park). This may appear when turning the ignition off if the vehicle is not in P (Park).

TRANSMISSION HOT — IDLE ENGINE
This message displays and a chime sounds if the transmission fluid in the vehicle gets hot. Driving with the transmission fluid temperature high can cause damage to the vehicle. Stop the vehicle and let it idle to allow the transmission to cool. This message clears when the fluid temperature reaches a safe level.

Vehicle Reminder Messages

ICE POSSIBLE DRIVE WITH CARE
This message displays when ice conditions are possible.

Vehicle Speed Messages

SELECTED SPEED LIMIT EXCEEDED
This message is displayed when the vehicle speed is greater than the set speed.

VEHICLE SPEED LIMITED
This message is displayed under certain conditions when there is a problem and the vehicle’s speed is being limited.

Washer Fluid Messages

WASHER FLUID LOW ADD FLUID
This message may display when the washer fluid level is low. Fill the windshield washer reservoir as soon as possible.

FAQs

What does “Service Vehicle Soon” mean on my Cadillac ATS 2015 display?

The phrase “Service Vehicle Soon” usually means that your car requires repair or upkeep.

How do I adjust the brightness of the screen on my Cadillac ATS 2015?

Your Cadillac ATS 2015’s screen brightness can be changed by navigating to the infotainment screen’s settings menu, choosing “Display Settings,” and then adjusting the brightness slider to your preferred level.

Why does my Cadillac ATS 2015 display show “Low Tire Pressure”?

One or more tires may have low pressure, as shown by the “Low Tire Pressure” notice.

What does “Check Engine” mean on the display of my Cadillac ATS 2015?

The “Check Engine” alert raises the possibility of an engine or emissions system problem with the car. For an accurate diagnosis, your car must be evaluated by a qualified mechanic.

How can I customize the information displayed on the screen of my Cadillac ATS 2015?

To alter the data shown on the screen, navigate to the settings menu and choose “Display Settings.” From there, you may select the information—such as audio, navigation, or vehicle data you wish to have shown on the screen.

What should I do if the “Oil Change Required” message appears on my Cadillac ATS 2015 display?

It’s time for an oil change when the message “Oil Change Required” shows up.

How do I reset the “Change Engine Oil Soon” message on my Cadillac ATS 2015?

Go to the settings menu, choose “Vehicle Settings,” then “Oil Life Reset,” and follow the instructions to reset the oil life monitor to remove the “Change Engine Oil Soon” notification.

Why does my Cadillac ATS 2015 display show “Reduced Engine Power”?

A safety feature that comes on when the engine’s performance is hampered is the “Reduced Engine Power” message. It is advisable to stop the car safely, switch off the engine, and let it sit for a few minutes before starting it again.

How do I pair my smartphone with the Bluetooth system on my Cadillac ATS 2015?

Go to your smartphone’s Bluetooth settings and turn on Bluetooth to link it with the system. Next, choose “Phone” and then “Pair Device” from the Cadillac ATS 2015 infotainment screen. Then, follow the on-screen instructions to finish pairing.

What does the “StabiliTrak Off” message mean on my Cadillac ATS 2015?

The notice “StabiliTrak Off” suggests that the stability control system of the car has been turned off manually. Usually, this capability is utilized when driving through severe snow or mud. Press the StabiliTrak button on the dashboard to turn StabiliTrak back on.

How do I adjust the clock on the display of my Cadillac ATS 2015?

Go to the settings menu, “Time and Date,” then “Set Time,” and then follow the instructions to change the clock on the display to the right time.

What does the “Service Power Steering” message mean on my Cadillac ATS 2015?

The sign “Service Power Steering” suggests that there might be a problem with the power steering system of the car. To find and fix any underlying issues, it is advised that the system be examined by a trained technician.

How do I change the units (e.g., temperature, distance) displayed on my Cadillac ATS 2015 screen?

Go to the settings menu, pick “Display Settings,” then “Units,” and select the units you want to use for temperature, distance, and other measures. This will modify the units that are shown on the screen.

What does the “Check Battery Voltage” message mean on my Cadillac ATS 2015?

The notice “Check Battery Voltage” indicates that either the charging system or the vehicle’s battery voltage may be low. It is recommended that an expert technician test the battery and charging mechanism.

How do I customize the theme or wallpaper on my Cadillac ATS 2015 display?

Go to the settings menu, choose “Display Settings,” then “Theme” or “Wallpaper,” and either upload your image or pick one of the available alternatives to customize the theme or wallpaper.

View Full PDF: 2015 Cadillac ATS Owner’s Manual| Auto User Guide

2023 cadillac xt6 Specs, Price, Features, Mileage and Review

Instrument Cluster: 2015 Cadillac ATS Dashboard Symbols Guide