Display Setting Guide: Cadillac Escalade 2016 Display Screen

Display Setting Guide: Cadillac Escalade 2016 Display Screen

Welcome to the pinnacle of automotive luxury and technology with the Cadillac Escalade 2016, where innovation seamlessly blends with sophistication. In this comprehensive Display Setting Guide, we delve into the cutting-edge display features that define the driving experience in this iconic luxury SUV. As you embark on a journey through the intricacies of the Escalade’s display settings, you’ll discover a world of intuitive controls and high-tech functionalities that elevate both convenience and aesthetics. From the mesmerizing touchscreen interface to the customizable settings that cater to your preferences, this guide is your passport to unlocking the full potential of the Escalade’s display system. Join us as we unravel the mastery behind the 2016 Cadillac Escalade’s display features, providing you with insights to enhance your driving pleasure in the lap of automotive opulence.

2023 Cadillac XT5 Specs, Price, Features, Mileage (Brochure)

Information Displays

Driver Information Center (DIC)
The DIC displays are shown in the left and right interactive display zones on the instrument cluster. The displays show the status of many vehicle systems. The controls for the DIC are on the right steering wheel control.

: Press the five-way control to move up or down in a list.

: Press the five-way control to move between the interactive display zones in the cluster.

Press

to go back to the previous menu.

SEL (Select): Press the center to open a menu or select a menu item. Press and hold to reset values on certain screens.

DIC Information Display Options

The information displayed on the DIC can be turned on or off through the Settings menu.

1. Press SEL while viewing the settings page in the center displays the zone on the cluster.
2. Scroll to Info Pages and press SEL.
3. Press to move through the list of possible information displays.
4. Press SEL while an item is highlighted to select or deselect that item. When an item is selected, a checkmark will appear next to it.

DIC Information Displays
The following is the list of all possible DIC information displays. Some of the information displays may not be available for your particular vehicle.

Trip 1 or Trip 2 and Average Fuel Economy: The Trip display shows the current distance traveled, in either kilometer (km) or miles (mi), since the trip odometer was last reset. The trip odometer can be reset by pressing and holding SEL while this display is active.
The Average Fuel Economy display shows the approximate average liters per 100 kilometers (L/100 km) or miles per gallon (mpg). This number is calculated based on the number of L/100 km (mpg) recorded since the last time this menu item was reset. This number reflects only the approximate average fuel economy that the vehicle has right now, and will change as driving conditions change. The Average Fuel Economy can be reset along with the trip odometer by pressing
and holding SEL while this display is active. Also shows if the Active Fuel Management is active and in V4 mode, or inactive and in V8 mode. See Active Fuel Management® 

Fuel Range: This shows the approximate distance the vehicle can be driven without refueling. LOW will be displayed when the vehicle is low on fuel. The fuel range estimate is based on an average of the vehicle’s fuel economy over recent driving history and the amount of fuel remaining in the fuel tank.

Instantaneous Fuel Economy :
Shows the current fuel economy in either litre per 100 kilometres (L/100 km) or miles per gallon (mpg). This number reflects only the approximate fuel economy that the vehicle has right now and changes frequently as driving conditions change.

Average Speed: This shows the average speed of the vehicle in kilometers per hour (km/h) or miles per hour (mph). This average is calculated based on the various vehicle speeds recorded since the last reset of this value. The average speed can be reset by pressing and holding SEL while this display is active.

Timer: This display can be used as a timer. To start the timer, press SEL while this display is active. The display will show the amount of time that has passed since the timer was last reset. To stop the timer, press SEL briefly while this display is active and the timer is running. To reset the timer to zero, press and hold SEL while this display is active.

Turn Arrow: Shows the next maneuver when using route guidance.

Estimated Time to Arrival: This shows the estimated time until arrival at your destination.

Distance to Destination: Shows the distance to the destination when using route guidance.

Speed Limit: Shows sign information, which comes from a roadway database in the onboard navigation.

Speed Warning: Allows the driver to set a speed that they do not want to exceed. To set the Speed Warning, press SEL when the Speed The warning is displayed. Press to adjust the value. This feature can be turned off by pressing and holding SEL while viewing this page. If the selected speed limit is exceeded, a pop-up warning is displayed with a chime.

Cruise Set Speed: This shows the speed the cruise control or Adaptive Cruise Control is set to.

Follow Distance Indicator: When Adaptive Cruise Control (ACC) is
not engaged, the current follow time to the vehicle ahead is displayed as a time value on this page. When ACC has been engaged, the display switches to the gap setting page. This page shows the current gap setting along

Battery Voltage: Shows the current battery voltage.

Oil Life: Shows an estimate of the oil’s remaining useful life. If the REMAINING OIL LIFE of 99% is displayed, that means 99% of the current oil life remains.

When the remaining oil life is low, the CHANGE ENGINE OIL SOON message will appear on the display. The oil should be changed as soon as possible.  In addition to the engine oil life system monitoring the oil life, additional maintenance is recommended in the Maintenance Schedule.

The Oil Life display must be reset after each oil change. It will not reset itself. Do not reset the Oil Life displays accidentally at any time other than when the oil has just been changed. It cannot be reset accurately until the next oil change. To reset the engine oil life system, press and hold SEL for several seconds while the Oil Life display is active.

Oil Pressure: Shows the engine oil pressure in kPa (kilopascals) or psi (pounds per square inch).

Engine Hours: Shows the total number of hours the engine has run.

Transmission Fluid
Temperature: Shows the temperature of the automatic transmission fluid in either degrees Celsius (°C) or degrees Fahrenheit (°F).

Tire Pressure: Shows the approximate pressures of all four tires. Tire pressure is displayed in either kilopascal (kPa) or in pounds per square inch (psi). If the pressure is low, the value for that tire is shown in amber.

Blank Page: Allows for no information to be displayed in the cluster info display areas.

Head-Up Display (HUD)

Warning
If the HUD image is too bright or too high in your field of view, it may take you more time to see things you need to see when it is dark outside. Be sure to keep the HUD image dim and placed low in your field of view.

If equipped with HUD, some information concerning the operation of the vehicle is projected onto the windshield. The image is projected through the HUD lens on top of the instrument panel.

The information appears as an image focused out toward the front of the vehicle.

Head-Up Display (HUD)

Warning
If the HUD image is too bright or too high in your field of view, it may take you more time to see things you need to see when it is  HUD image dim and placed low in your field of view.

If equipped with HUD, some information concerning the operation of the vehicle is projected onto the windshield. The image is projected through the HUD lens on top of the instrument panel. The information appears as an image focused out toward the front of the vehicle.

Caution
If you try to use the HUD image as a parking aid, you may misjudge the distance and damage your vehicle. Do not use the HUD image as a parking aid.

The HUD information can be displayed in various languages in some vehicles. The speedometer reading and other numerical values
can be displayed in either English or metric units.

The language selection is changed through the radio and the units of measurement are changed through the instrument cluster.

HUD Display on the Vehicle Windshield

The HUD may display some of the following vehicle information and vehicle messages or alerts:

• Speed
• Tachometer
• Audio
• Phone
• Navigation
• Collision Alert
• Cruise Control
• Lane Keep Assist
• Low Fuel

Some vehicle messages or alerts displayed in the HUD may be cleared by using the steering wheel controls..

Some information shown may not be available on your vehicle if it is not equipped with these features.

The HUD control is to the left of the steering wheel.

1. Adjust the driver seat.
2. Start the engine.
3. Use the following settings to adjust the HUD.

(Image Adjustment): Press down or lift to centre the HUD image. The HUD image can only be adjusted up and down, not side to side.

INFO(Display View): Press to select the display view. Each press will change the display view.

(Image Brightness) : Lift up and hold to brighten the display. Press down and hold to dim the display. Hold down to turn the display off.

The HUD image will automatically dim and brighten to compensate for outside lighting. The HUD brightness control can also be adjusted as needed.

The HUD image can temporarily light up depending on the angle and position of the sunlight on the HUD display. This is normal.

Polarized sunglasses could make the HUD image harder to see.

HUD Views
There are four views in the HUD. Some vehicle information and vehicle messages or alerts may be displayed in any view.

Speed View: This display gives the speedometer reading (in English or metric units), speed limit, Adaptive Cruise Control speed, Lane Departure Warning, and Vehicle Ahead indicator. Some information

Audio/Phone View: This displays the speed view along with audio/ phone information. The current radio station, media type, and incoming calls will be displayed.

All HUD views may briefly display audio information when the driver uses the steering wheel controls to adjust the audio settings appearing in the instrument cluster.

Incoming phone calls appearing in the instrument cluster may also display in any HUD view.

Navigation View: This display includes the information in the speed view along with Turn-by-Turn Navigation information in some vehicles. When navigation routing is not active “No Route Active” is displayed.

Navigation Turn-by-Turn Alerts shown in the instrument cluster may also be displayed in any HUD view.

Performance View: This displays the speedometer reading, rpm reading, transmission positions, and gear shift indicator.

Care of the HUD
Clean the inside of the windshield to remove any dirt or film that could reduce the sharpness or clarity of the HUD image.

Clean the HUD lens with a soft cloth sprayed with glass cleaner. Wipe the lens gently, then dry it.

HUD Troubleshooting
Check that:

• Nothing is covering the HUD lens.
• HUD brightness setting is not too dim or too bright.
• HUD is adjusted to the proper height.
• Polarized sunglasses are not worn.
• The windshield and HUD lens are clean.

If the HUD image is not correct, contact your dealer. The windshield is part of the HUD system. If the windshield needs replacing, 

Vehicle Messages

Messages displayed on the DIC indicate the status of the vehicle or some action that may be needed to correct a condition. Multiple messages may be displayed one after the other.

The messages that do not require immediate action can be acknowledged and cleared by pressing SET/CLR. The messages that require immediate action cannot be cleared until that action is performed. All messages should be taken seriously and clearing the messages does not correct the problem.

The following are some of the vehicle messages that may be displayed depending on your vehicle content.

Battery Voltage and Charging Messages

BATTERY SAVER ACTIVE
This message is displayed when the vehicle has detected that the battery voltage is dropping beyond a reasonable point. The battery-saver system starts reducing features of the vehicle that may be noticed. At the point that features are disabled, this message displays. Turn off unnecessary accessories to allow the battery to recharge.

LOW BATTERY
This message is displayed when the battery voltage is low. See Battery – North America 

SERVICE BATTERY CHARGING SYSTEM
This message is displayed when there is a fault in the battery charging system. Take the vehicle to your dealer for service.

TRANSPORT MODE ON
This message is displayed when the vehicle is in transport mode. Some features can be disabled while in this mode, including Remote Keyless Entry (RKE), remote start, and the vehicle alarm system. Take the vehicle to your dealer for service to turn the transport mode off. 

Brake System Messages

BRAKE FLUID LOW
This message is displayed when the brake fluid level is low. 

BRAKES OVERHEATED
This message is displayed when the brakes are becoming overheated.

This may be seen when driving on hills. Shift to a lower gear.

STEP ON THE BRAKE TO RELEASE PARK BRAKE
This message is displayed if you attempt to release the Electric Parking Brake without the brake pedal applied.

RELEASE PARKING BRAKE
This message is displayed if The Electric Parking Brake is on while the vehicle is in motion. 

SERVICE BRAKE ASSIST
This message may be displayed when there is a problem with the brake boost assist system. When this message is displayed, the brake boost assist motor might be heard operating and you might notice pulsation in the brake pedal. This is normal under these conditions. Take the vehicle to your dealer for service.

SERVICE PARKING BRAKE
This message is displayed when there is a problem with the parking brake. Take the vehicle to your dealer for service.

Compass Messages

The compass display will be blank if the vehicle temporarily loses
communication with the Global Positioning System (GPS).

Cruise Control Messages

ADAPTIVE CRUISE SET TO XXX
This message is displayed when the Adaptive Cruise Control (ACC) speed is set. 

ADAPTIVE CRUISE IS TEMPORARILY UNAVAILABLE
This message is displayed when attempting to activate Adaptive Cruise Control (ACC) when it is temporarily unavailable. The ACC system does not need service.
This can occur under the following conditions:

• The radar is not clean. Keep the radar sensors free of mud, dirt, snow, ice, and slush. Clean the entire front and/or rear of the vehicle. 
• Heavy rain or snow is interfering with the radar object detection or camera performance.

CRUISE SET TO XXX
This message is displayed when the cruise control speed is set. 

NO CRUISE BRAKING GAS PEDAL APPLIED
This message is displayed when Adaptive Cruise Control (ACC) is active and the driver presses the gas pedal. When this occurs, ACC will not brake. 

SERVICE ADAPTIVE CRUISE CONTROL
This message is displayed when the Adaptive Cruise Control (ACC) needs service. Take the vehicle to your dealer.

SHIFT TO PARK BEFORE EXITING
This message may be displayed if Adaptive Cruise Control (ACC) is engaged in holding the vehicle at a stop, and the driver attempts to exit the vehicle. Put the vehicle in P (Park) before exiting.

Door Ajar Messages

DOOR OPEN
A door open symbol will be displayed on the DIC showing that the door is open. If the vehicle has been shifted out of P (Park), a DOOR The OPEN message will also be displayed. Close the door completely.

HOOD OPEN
This message will display along with a hood open symbol when the hood is open. Close the hood completely.

TRUNK OPEN
This message will display along with a symbol when the trunk is open. Close the trunk completely.

Engine Cooling System Messages

A/C OFF DUE TO HIGH ENGINE TEMP
This message displays when the engine coolant becomes hotter than the normal operating temperature.
See Engine Coolant Temperature Gauge. To avoid added strain
on a hot engine, the air conditioning compressor automatically turns off.
When the coolant temperature returns to normal, the air conditioning compressor turns back on. You can continue to drive your vehicle.

If this message continues to appear, have the system repaired by your dealer as soon as possible to avoid damage to the engine.

ENGINE OVERHEATED — IDLE ENGINE
This message is displayed when the engine coolant temperature is too hot. Stop and allow the vehicle to idle until it cools down.

ENGINE OVERHEATED — STOP ENGINE
This message displays continuous chime sounds if the engine cooling system reaches unsafe temperatures for operation. Stop and turn off the vehicle as soon as it is safe to do so to avoid severe damage. This message clears when the engine has cooled to a safe operating temperature.

HIGH COOLANT TEMPERATURE
This message displays if the coolant temperature is hot.

Engine Oil Messages

CHANGE ENGINE OIL SOON
This message is displayed when the engine oil needs to be changed. When you change the engine oil, be sure to reset the oil life system. 

ENGINE OIL HOT, IDLE ENGINE
This message is displayed when the engine oil temperature is too hot. Stop and allow the vehicle to idle until it cools down.

ENGINE OIL LOW — ADD OIL
On some vehicles, this message displays when the engine oil level may be too low. Check the oil level before filling to the recommended level. If the oil is not low and this message remains on, take the vehicle to your dealer for service.

OIL PRESSURE LOW — STOP ENGINE
This message displays if low oil pressure levels occur. Stop the vehicle as soon as safely possible and do not operate it until the cause of the low oil pressure has been corrected. Check the oil as soon as possible and have the vehicle serviced by your dealer.

Engine Power Messages

ENGINE POWER IS REDUCED
This message is displayed when the vehicle’s engine power is reduced. Reduced engine power can affect the vehicle’s ability to accelerate. If this message is on, but there is no reduction in performance, proceed to your destination. The performance may be reduced the next time the vehicle is driven. The vehicle may be driven at a reduced speed while this message is on, but maximum acceleration and speed may be reduced. Anytime this message stays on, the vehicle should be taken to your dealer for service as soon as possible.

Fuel System Messages

FUEL LEVEL LOW
This message displays when the vehicle is low on fuel. Refuel as soon as possible.

Key and Lock Messages

NO REMOTE DETECTED
This message is displayed when the transmitter battery may be weak.

NO REMOTE KEY WAS DETECTED PLACE KEY IN THE TRANSMITTER POCKET THEN START YOUR VEHICLE
This message displays when trying to start the vehicle if an RKE transmitter is not detected. The transmitter battery may be weak.

NO REMOTE PRESS BRAKE TO RESTART
This message is displayed if the remote is no longer detected in the vehicle. Press the brake pedal to restart the vehicle.

NUMBER OF KEYS PROGRAMMED
This message is displayed when programming new keys to the vehicle.

REMOTE LEFT IN VEHICLE
This message is displayed when leaving the vehicle with the RKE transmitter still inside.

REPLACE THE BATTERY IN THE REMOTE KEY
This message is displayed when the battery in the RKE transmitter needs to be replaced.

Lamp Messages

AFL (ADAPTIVE FORWARD LIGHTING) LAMPS NEED SERVICE
This message is displayed when the AFL system is disabled and needs service. See your dealer. 

XXX TURN INDICATOR FAILURE
When one of the turn signals is out, this message shows which bulb needs to be replaced.

TURN SIGNAL ON
This message is displayed if the turn signal has been left on. Turn off the turn signal.

Object Detection System Messages

24 GHz RADARS OFF
This message is displayed when driving in certain areas where there may be radar interference. Adaptive Cruise Control (ACC), Forward Collision Alert (FCA), and the Front Automatic Braking (FAB) System may not work or may not work as well. The vehicle does not need service.

AUTOMATIC COLLISION PREP OFF
This message is displayed when the Front Automatic Braking (FAB) system has been turned off. 

AUTOMATIC COLLISION PREP REDUCED
This message is displayed when the Front Automatic Braking (FAB) system has been set to the Alert setting. This setting disables most FAB functions. Some last-second automatic braking capability is still provided with the Alert setting, but braking is less likely to occur. 

AUTOMATIC COLLISION PREP UNAVAILABLE
This message is displayed when the Front Automatic Braking (FAB) system has been unavailable for some time. The FAB System does not need service.
This can occur under the following conditions:

• The front of the vehicle or windshield is not clean. Keep these areas clean and free of mud, dirt, snow, ice, and slush.
• Heavy rain or snow is interfering with the object detection performance.

This message may also be displayed if there is a problem with the StabiliTrak system. 

FORWARD COLLISION ALERT OFF
This message is displayed when the Forward Collision Alert has been turned off.

FRONT CAMERA BLOCKED CLEAN WINDSHIELD
This message is displayed when the camera is blocked. Cleaning the outside of the windshield behind the rearview mirror may correct the issue. The Lane Departure Warning (LDW) the system will not operate. Adaptive Cruise Control (ACC), Forward Collision Alert (FCA), and Front Automatic Braking (FAB) The system may not work or may not work as well.

LANE DEPARTURE WARNING UNAVAILABLE
This message is displayed when attempting to activate the Lane Departure Warning (LDW) system when it is temporarily unavailable.

The LDW system does not need service. This message could be due to the camera being blocked. Cleaning the outside of the windshield behind the rearview mirror may correct the issue.

REAR AUTO BRAKE/PARK ASSIST OFF
This message is displayed when the Parking Assist system has been turned off or when there is a temporary condition causing the system to be disabled.

REAR AUTO BRAKE AND PARK ASSIST UNAVAILABLE
This message is displayed when attempting to activate the parking and backing features of the Driver Assistance System when they are temporarily unavailable. The system does not need service.

This can occur under the following conditions:

• The radar is not clean. Keep the radar sensors free of mud, dirt, snow, ice, and slush. Clean the entire front and/or rear of the vehicle.
• Heavy rain or snow is interfering with the radar object detection or camera performance.

SERVICE AUTOMATIC COLLISION PREP
If this message displays, take the vehicle to your dealer to repair the system. Adaptive Cruise Control (ACC), Forward Collision Alert (FCA), and/or the Front Automatic Braking (FAB) System may not work. Do not use these systems until the vehicle has been repaired.

SERVICE DRIVER ASSIST SYSTEM
If this message displays, take the vehicle to your dealer to repair the system.

Adaptive Cruise Control (ACC), Forward Collision Alert (FCA), Front Automatic Braking (FAB) System, Assistance Systems for Parking or Backing, and/or Lane Departure Warning (LDW) system may not work. Do not use these systems until the vehicle has been repaired.

SERVICE FRONT CAMERA
If this message remains on after continued driving, the vehicle needs service. Do not use the Lane Departure Warning (LDW) and Forward Collision Alert (FCA) features. Take the vehicle to your dealer.

SERVICE PARK ASSIST
This message displays if there is a problem with the Parking Assist system. Do not use this system to help you park. See your dealer for service.

SERVICE REAR AUTO BRAKE AND PARK ASSIST
This message displays if there is a problem with the parking and backing features of the Driver Assistance System. Do not use this system to help park or back the vehicle. See your dealer for service.

SERVICE SIDE DETECTION SYSTEM
If this message remains on after continued driving, the vehicle needs service. Side Blind Zone Alert (SBZA) and Rear Cross Traffic Alert (RCTA) features will not work. Take the vehicle to your dealer.

SIDE DETECTION SYSTEM UNAVAILABLE
This message indicates that Side Blind Zone Alert (SBZA) and Rear Cross Traffic Alerts (RCTA) are disabled either because the sensor is blocked and cannot detect vehicles in the blind zone, or the vehicle is passing through an open area, such as the desert, where there is insufficient data for operation. This message may also activate during heavy rain or due to road spray. The vehicle does not need service. 

Ride Control System Messages

SERVICE ALL-WHEEL DRIVE
This message is displayed when there is a problem with the Wheel Drive (AWD) system. This message could be set by several issues. Some may require the service of the AWD system some will not. The vehicle will run in normal two-wheel drive mode when this message has been set. This could be caused by:

• A vehicle or an AWD system electronics problem.
• Various vehicle electrical issues.
• Worn-out or overheated clutch plates.
• Loss of fluids.

If this message appears, stop when convenient and turn off the ignition for 30 seconds. Restart the vehicle and check for the message on the DIC display. If the message has gone off and stays off, it is not necessary to take your vehicle to the dealer. If the message still displays or appears again when you begin driving, the system needs service. See your dealer.

SERVICE STABILITRAK
This message displays if there is a problem with the StabiliTrak system.

SERVICE SUSPENSION SYSTEM
This message displays if there is a problem with the Selective Ride Control. 

SERVICE TRACTION CONTROL
This message is displayed when there is a problem with the Traction Control System (TCS). 

SPORT MODE ON
This message displays when the Sport The mode has been activated. 

TOUR MODE ON
This message displays when the Tour Mode is on.

TRACTION CONTROL OFF
This message is displayed when the Traction Control System (TCS) has been turned off. 

TRACTION CONTROL ON
This message is displayed when the Traction Control System (TCS) has been turned on. 

Airbag System Messages

SERVICE AIRBAG
This message displays if there is a problem with the airbag system. See your dealer for service. 

Safety Belt Messages

AUTOMATIC SEATBELT TIGHTENING UNAVAILABLE
This message displays when the Automatic Safety Belt Tightening System if equipped, becomes unavailable. This could be caused by a temporary condition. If the message continues to display, see your dealer.

SERVICE AUTOMATIC SEATBELT TIGHTENING SYSTEM
If this message displays, take the vehicle to your dealer to repair the Automatic Safety Belt Tightening System, if equipped.

Steering System
Messages
STEERING ASSIST IS
REDUCED DRIVE WITH CARE
This message may display if a problem occurs with the electric
power steering system. If this message appears, the steering effort may be slightly higher than normal.
The vehicle is still safe to drive. Use caution while in reduced assist mode. If this message is persistent or appears repeatedly, take the vehicle to your dealer for service.

Security Messages
THEFT ATTEMPTED
This message displays if the vehicle detects a tamper condition.

Steering System Messages
STEERING ASSIST IS REDUCED DRIVE WITH CARE
This message may display if a problem occurs with the electric power steering system. If this message appears, the steering effort may be slightly higher than normal.

The vehicle is still safe to drive. Use caution while in reduced assist mode. If this message is persistent or appears repeatedly, take the vehicle to your dealer for service.

SERVICE POWER STEERING
This message displays when there is a problem with electric power steering. If this message displays and a reduction in steering performance or loss of power steering assistance is noticed, see your dealer.

Starting the Vehicle Messages

PRESS THE BRAKE TO START
This message is displayed when attempting to start the vehicle without first pressing the brake pedal.

SERVICE KEYLESS START SYSTEM
This message is displayed if there is a problem with the pushbutton start system. Take the vehicle to your dealer for service.

Tire Messages
SERVICE TIRE MONITOR SYSTEM
This message displays if there is a problem with the Tire Pressure Monitor System (TPMS).

Tire Messages
SERVICE TIRE MONITOR SYSTEM
This message displays if there is a problem with the Tire Pressure Monitor System (TPMS).

TIRE LEARNING ACTIVE
This message displays when the system is learning new tires. 

TIRE PRESSURE LOW ADD AIR TO TIRE
This message displays when the pressure in one or more of the tires is low.
This message also displays LEFT FRONT, RIGHT FRONT, LEFT REAR, or RIGHT REAR to indicate the location of the low tire.
The low tire pressure warning light will also come on. 

If a tire pressure message appears on the DIC, stop as soon as possible. Inflate the tires by adding air until the tire pressure is equal to the values shown on the Tire and Loading Information label. See Tires Vehicle Load Limits, and Tire Pressure More than one tire pressure message can appear at a time. The DIC also shows the tire pressure values. 

Transmission Messages 4WD OFF
If equipped with four-wheel drive, this message is displayed when the
four-wheel-drive system is temporarily disabled due to an
overheated condition. The vehicle will run in a two-wheel drive when this message is present. Once the four-wheel-drive system cools down,
the message turns off and the four-wheel-drive system returns to normal operation.

4WD SHIFT IN PROGRESS
This message will display while the four-wheel-drive system is shifting.

FOR 4WD LOW SHIFT TO NEUTRAL
If a four-wheel-drive shift into 4 n is requested, and the vehicle speed is
correct, but the transmission is not in N (Neutral), this message will
display until the transmission is shifted to N (Neutral).

FOR 4WD LOW SLOW TO XXX
If a four-wheel-drive shift into 4 n is requested, but the vehicle speed is too high, this message will display until the correct vehicle speed is reached.

GRADE BRAKING ACTIVE
This message displays when grade braking has been activated while
driving on downhill grades. This message will only appear the first time the feature is activated in an ignition cycle. See Tow/Haul Mode  Automatic Transmission and Cruise Control 

GRADE BRAKING OFF
This message displays when grade braking has been disabled with the
Tow/Haul Mode button on the end of the shift lever. See Tow/Haul Mode  Automatic Transmission and Cruise Control.

GRADE BRAKING ON
This message displays when grade braking has been enabled with the Tow/Haul Mode button on the end of the shift lever. 

SERVICE 4WD
If the vehicle has four-wheel drive, this message may display if a problem occurs with the four-wheel-drive system. If this message appears, stop as soon as possible and turn off the vehicle.
Turn the vehicle off for at least one minute, then restart the vehicle and check for the message on the DIC display. If the message is still displayed or appears again when you begin driving, the four-wheel-drive system needs service. See your dealer.

SHIFT DENIED
This message displays when the shift lever is in M(Manual Mode)
and a transmission range has been selected that is unavailable at the current vehicle speed.

TO EXIT 4WD LOW SHIFT TO NEUTRAL
If a four-wheel-drive shift out of 4 n is requested, and the vehicle speed is correct, but the transmission is not in N (Neutral), this message will display until the transmission is shifted to N (Neutral).

TO EXIT 4WD LOW SLOW
TO XXX
If a four-wheel-drive shift out of 4 n is requested, but the vehicle speed is too high, this message will display until the correct vehicle speed is reached.

TRANSMISSION HOT IDLE
ENGINE
This message displays and a chime may sound if the transmission fluid in the vehicle gets hot. Driving with the transmission fluid temperature high can cause damage to the vehicle. Stop the vehicle and let it idle to allow the transmission to cool. This message clears and the chime stops when the fluid temperature reaches a safe level.
When towing, use Tow/Haul Mode to prevent damage to the engine or transmission.

VEHICLE IN 4WD LOW
This message will display if the vehicle is driven in 4 n for about 10 minutes above 72 km/h (45 mph).

Vehicle Reminder Messages

ICE POSSIBLE DRIVE
WITH CARE
This message displays when ice conditions are possible. Vehicle Speed Messages.

SELECTED SPEED LIMIT
EXCEEDED
This message is displayed when the vehicle speed is greater than the set speed.

Washer Fluid Messages

WASHER FLUID LOW ADD FLUID
This message may display when the washer fluid level is low. Fill the windshield washer reservoir as soon as possible. See Engine
Compartment Overview 0 270 for the location of the windshield
washer reservoir. Also, see Washer Fluid .

Window Messages

OPEN, THEN CLOSE DRIVER/
PASSENGER WINDOW
This message is displayed when the window needs to be reprogrammed.
If the vehicle’s battery has been recharged or disconnected, you will need to program each front window for the express-up feature to work.

Vehicle Personalization

Use the audio system controls to access the personalization menus for customizing vehicle features.

The following are all possible personalization features. Depending on the vehicle, some may not be available.

Infotainment System Audio System Controls
To access the personalization menu:

1. Press SETTINGS on the Home page on the infotainment
   system display.
2. Press the desired feature to display a list of available options.
3. Press to select the desired feature setting.
4. Press the
   Back screen button to return to the previous menu.

Personalization Menus
The following list of menu items may be available:

• Time and Date
• Driving Mode
• Language (Language)
• Valet Mode
• Radio
•  Vehicle
• Bluetooth
• Apple CarPlay
• Android Auto
• Voice
• Display
• Return to Factory Settings
• Software Information

Detailed information for each menu follows.

Time and Date
Manually set the time and date. 

Language (Language)
Select Language, then select from the available language(s).

Valet Mode 
This will lock the infotainment system and steering wheel controls. It may also limit access to vehicle storage locations.

To enable valet mode:

1. Enter a four-digit code on the keypad.
2. Select Enter to go to the confirmation screen.
3. Re-enter the four-digit code.

Press LOCK or UNLOCK to lock or unlock the system. Press Back to go back to the previous menu.

Radio
Press to display the Radio menu and the following may display:

• Manage Favorites
• Number of Favorites Shown
• Auto Volume
• Audible Touch Feedback
• Bose Audio Pilot
• Auto Volume
• Maximum Startup Volume
• Audio Cue Volume

Manage Favorites
This allows favorites to be edited. See “Manage Favorites” in
“Settings” under “Radio” in the infotainment manual

Number of Favorites Shown
Press to set the number of favorites to display.

Select the desired number or select Auto and the infotainment system will automatically adjust the number of favorites shown.

Audible Touch Feedback
This allows Audible Touch Feedback is to be turned on or off.
Select Off or On.

Bose Audio Pilot
This allows Bose AudioPilot to be turned on or off.
Select Off or On.

Auto Volume
This feature adjusts the volume based on vehicle speed and
ambient noise.
Select Off, Low, Medium-Low, Medium, Medium-High, or High.

Maximum Startup Volume
This feature sets the maximum startup volume. If the vehicle is started and the volume is greater than this level, the volume is adjusted to this level. To set the maximum startup volume, press + or − to increase or decrease.

Audio Cue Volume
This feature sets the volume of audio files played at system startup and shutdown.
Select On, then press + or − to increase or decrease the volume.

Vehicle
Select and the following may display:

• Climate and Air Quality
• Collision/Detection Systems
• Comfort and Convenience
• Lighting
• Power Door Locks
• Remote Lock, Unlock, Start

Climate and Air Quality
Select the following May display:

• Auto Fan Max Speed
• Air Quality Sensor
• Auto Heated Seats
• Auto Defog
• Auto Rear Defog

Auto Fan Max Speed
This feature will set the maximum auto fan speed.
Select Low, Medium, or High.

Air Quality Sensor
This allows for the selection of air quality sensor operation at high or low sensitivity.
Select Off, Low Sensitivity, or High Sensitivity.

Auto Heated Seats
When enabled, this feature will automatically activate the heated seats at the level required by the interior temperature. The auto-heated seats can be turned off by using the heated seat buttons on the centre stack. 
Select Off or On.

Auto Defog
When set to On, the front defog will automatically react to temperature and humidity conditions that may cause fogging.
Select Off or On.

Auto Rear Defog
If equipped, this feature will
automatically turn on the rear defog.
Select Off or On.

Collision/Detection Systems
Select the Collision/Detection The systems menu and the following may display:

• Alert Type
• Auto Collision Preparation
• Go Notifier
• Park Assist
• Lane Change Alert
• Rear Cross Traffic Alert

Alert Type
This feature will set crash alerts to beeps or seat vibrations. This setting affects all crash alerts including Forward Collision Alert,
Lane Departure Warning, and Park Assist alerts.

Select Beeps or Safety Alert Seat.

Auto Collision Preparation
This feature will turn on or off the Forward Collision Alert (FCA) and Front Automatic Braking (FAB). The Off-setting disables all FCA and FAB functions. With the Alert and Brake settings, both FCA and FAB are available. The Alert setting disables FAB, but some last-second automatic braking capability is still provided, though less likely to occur.
Select Off, Alert and Brake, or Alert.

Go Notifier
This feature will give a reminder from Adaptive Cruise Control when it has brought the vehicle to a complete stop behind another stopping vehicle, and then that vehicle drives on. 
Select Off or On.

Park Assist
If equipped, this allows the feature to be turned on or off. See Assistance Systems for Parking or Backing.
Select Off, On, or On with the Towbar Attached.

Side Blind Zone Alert
This allows the feature to be turned on or off. See Side Blind Zone Alert (SBZA).
Select Off or On.

Lane Change Alert
The LCA system is a lane-changing aid that assists drivers with avoiding lane-change crashes. 
Select Off or On.

Comfort and Convenience
Select the Comfort and Convenience menu and the following may be displayed:

• Auto Memory Recall
• Easy Exit Options
• Chime Volume
• Reverse Tilt Mirror
• Auto Mirror Folding
• Auto Wipe in Reverse Gear

Auto Memory Recall
This feature automatically recalls the current driver’s previously stored 1 or 2 button positions when entering the vehicle. 
Select Off or On.

Easy Exit Options
This allows the feature to be turned on or off. See Memory Seats.
Select On or Off. Select Off or On.

Chime Volume
This allows the selection of the chime volume level.
Press + or − to adjust the volume.

Reverse Tilt Mirror
When on, the driver and/or passenger mirrors will tilt downward when the vehicle is shifted to R (Reverse) to improve visibility of the ground near the rear wheels.
Select Off, On – Driver and Passenger, On – Driver, or On -Passenger.

Auto Mirror Folding
When on, the outside rearview mirrors will automatically fold or unfold when the Remote Keyless Entry (RKE) transmitter

button is pressed and held.
Select Off or On.

Auto Wipe in Reverse Gear
When the front wiper is on, the rear wiper will automatically activate when the vehicle is shifted to R (Reverse).
Select Off or On.

Lighting
Select and the following may display:

• Vehicle Locator Lights
• Exit Lighting

Vehicle Locator Lights
This feature will flash the exterior lamps and allow some of the exterior lamps and most of the interior lamps to turn on briefly when

on the Remote Keyless Entry (RKE) the transmitter is pressed to locate the vehicle.
Select Off or On.

Exit Lighting
This allows the selection of how long the exterior lamps stay on when leaving the vehicle when it is dark outside.
Select Off, 30 Seconds, 60 Seconds, or 120 Seconds.

Power Door Locks
Select and the following may display:

• Unlocked Door Anti-Lockout
• Auto Door Unlock
• Delayed Door Lock

Unlocked Door Anti-Lockout
When on, this feature will keep the driver door from locking when the door is open. If Off is selected, the A delayed Door Lock menu will be available.
Select Off or On.

Auto Door Unlock
This allows the selection of which of the doors will automatically unlock when the vehicle is shifted into P (Park).
Select Off, All Doors, or Driver Door.

Delayed Door Lock
When on, this feature will delay the locking of the doors. To override the delay, press the power door lock switch on the door.
Select Off or On.

Remote Lock, Unlock, Start
Select and the following may display:

• Remote Unlock Light Feedback
• Remote Lock Feedback
• Remote Door Unlock
• Remote Start Auto Cool Seats
• Remote Start Auto Heat Seats
• Remote Window Operation
• Passive Door Unlock
• Passive Door Lock
• Remote Left in Vehicle Alert

Remote Unlock Light Feedback
When on, the exterior lamps will flash when unlocking the vehicle with the RKE transmitter.
Select Off or Flash Lights.

Remote Lock Feedback
This allows the selection of what type of feedback is given when locking the vehicle with the RKE transmitter.
Select Off, Lights and Horn, Lights Only, or Horn Only.

Remote Door Unlock
This allows the selection of which doors will unlock when pressing

on the RKE transmitter.
Select All Doors or Driver Door.

Remote Start Auto Cool Seats
If equipped and turned on, this feature will turn on the ventilated seats when using remote start on warm days.
Select Off or On.

Remote Start Auto Heat Seats
If equipped and turned on, this feature will turn on the heated seats when using remote start on cold days. 
Select Off or On.

Remote Window Operation
This allows the window to be opened when pressing

on the RKE transmitter. 
Select Off or On.

Passive Door Unlock
This allows the selection of what doors will unlock when using the button on the driver’s door to unlock the vehicle.
Select All Doors or Driver Door.

Passive Door Lock
This allows passive locking to be turned on or off and selects feedback. Select Off, On with Horn Chirp, or On.

Remote Left in Vehicle Alert
This feature sounds an alert when the RKE transmitter is left in the vehicle.
Select Off or On.

Bluetooth
Select and the following may display:

• Pair New Device
• Device Management
• Ringtones
• Voice Mail Numbers

Pair New Device
Select to pair a new device. See “Pairing” in “Infotainment Controls” under “Bluetooth” in the infotainment manual.

Device Management
Select to connect to a different phone source, disconnect a phone, or delete a phone.

Ringtones
Press to change the ringtone for the specific phone. The phone does not need to be connected to change the ringtone.

Voice Mail Numbers
This feature displays the voicemail number for all connected phones. To change the voicemail number, select EDIT or press the EDIT button. Type a new number, then select SAVE or press the SAVE button.

Apple CarPlay™
Select and the following may display:

• Apple CarPlay
• Manage Apple CarPlay Devices

Apple CarPlay
This feature allows Apple devices to be connected to the infotainment system through a USB port.
Select Off or On.

Manage Apple CarPlay Devices
Select to manage Apple devices. Apple CarPlay must be on for this feature to be accessed.

Android Auto
Select the following May display:

• Android Auto
• Manage Android Auto Devices

Android Auto
This feature allows Android devices to be connected to the infotainment system through a USB port.

Select Off or On.

Manage Android Auto Devices
This feature allows Android devices to be connected to the infotainment system through a USB port.

Manage Android Auto Devices
Select to manage Android devices. Android Auto must be on for this feature to be accessed.

Voice
Select the following May display:

• Confidence Threshold
• Prompt Length
• Audio Feedback Speed

Confidence Threshold
This feature allows the adjustment of the sensitivity of the speech recognition system.
Select Confirm More or Confirm Less.

Prompt Length
This feature adjusts the voice prompt length.
Select Short or Long.

Audio Feedback Speed
This feature adjusts the audio feedback speed.
Select Slow, Medium, or Fast.

Display
Select and the following may display:

• Mode
• Proximity Sensing
• Calibrate Touchscreen
• Turn Display Off

Mode
Select to change the display screen for day or night driving.
Select Auto, Day, or Night.

Proximity Sensing
When on, certain screen buttons and features will become visible when a hand approaches the screen.

Select Off, On, or On – Map Only.

Calibrate Touchscreen
Select to calibrate the touchscreen, then follow the prompts.

Turn Display Off
Select to turn the display off. Press anywhere on the display area or any faceplate button to turn the display on.

Rear Camera
Select and the following may display:

• Guidance Lines
• Rear Park Assist Symbols

Guidance Lines
Select to turn Off or On. See Assistance Systems for Parking or Backing.

Rear Park Assist Symbols
Select to turn Off or On. See Assistance Systems for Parking or Backing 

Return to Factory Settings
Select and the following may display:

• Restore Vehicle Settings
• Clear All Private Data
• Restore Radio Settings

Restore Vehicle Settings
This allows the selection of restoring vehicle settings.
Select Restore or Cancel.

Clear All Private Data
This allows the selection to clear all private information from the vehicle.
Select Delete or Cancel.

Restore Radio Settings
This allows selection to restore radio settings.
Select Restore or Cancel.

Software Information
Select to view the infotainment system’s current software information.

FAQs

Useful Links

View Full PDF: 2016 Cadillac Escalade Owner’s Manual| Auto User Guide

2023 Cadillac XT5 Specs, Price, Features, Mileage (Brochure)

Dashboard Warning Lights: 2016 Cadillac Escalade Guide